| package flate |
| |
| import "fmt" |
| |
| type fastEncL6 struct { |
| fastGen |
| table [tableSize]tableEntry |
| bTable [tableSize]tableEntryPrev |
| } |
| |
| func (e *fastEncL6) Encode(dst *tokens, src []byte) { |
| const ( |
| inputMargin = 12 - 1 |
| minNonLiteralBlockSize = 1 + 1 + inputMargin |
| hashShortBytes = 4 |
| ) |
| if debugDeflate && e.cur < 0 { |
| panic(fmt.Sprint("e.cur < 0: ", e.cur)) |
| } |
| |
| // Protect against e.cur wraparound. |
| for e.cur >= bufferReset { |
| if len(e.hist) == 0 { |
| for i := range e.table[:] { |
| e.table[i] = tableEntry{} |
| } |
| for i := range e.bTable[:] { |
| e.bTable[i] = tableEntryPrev{} |
| } |
| e.cur = maxMatchOffset |
| break |
| } |
| // Shift down everything in the table that isn't already too far away. |
| minOff := e.cur + int32(len(e.hist)) - maxMatchOffset |
| for i := range e.table[:] { |
| v := e.table[i].offset |
| if v <= minOff { |
| v = 0 |
| } else { |
| v = v - e.cur + maxMatchOffset |
| } |
| e.table[i].offset = v |
| } |
| for i := range e.bTable[:] { |
| v := e.bTable[i] |
| if v.Cur.offset <= minOff { |
| v.Cur.offset = 0 |
| v.Prev.offset = 0 |
| } else { |
| v.Cur.offset = v.Cur.offset - e.cur + maxMatchOffset |
| if v.Prev.offset <= minOff { |
| v.Prev.offset = 0 |
| } else { |
| v.Prev.offset = v.Prev.offset - e.cur + maxMatchOffset |
| } |
| } |
| e.bTable[i] = v |
| } |
| e.cur = maxMatchOffset |
| } |
| |
| s := e.addBlock(src) |
| |
| // This check isn't in the Snappy implementation, but there, the caller |
| // instead of the callee handles this case. |
| if len(src) < minNonLiteralBlockSize { |
| // We do not fill the token table. |
| // This will be picked up by caller. |
| dst.n = uint16(len(src)) |
| return |
| } |
| |
| // Override src |
| src = e.hist |
| nextEmit := s |
| |
| // sLimit is when to stop looking for offset/length copies. The inputMargin |
| // lets us use a fast path for emitLiteral in the main loop, while we are |
| // looking for copies. |
| sLimit := int32(len(src) - inputMargin) |
| |
| // nextEmit is where in src the next emitLiteral should start from. |
| cv := load6432(src, s) |
| // Repeat MUST be > 1 and within range |
| repeat := int32(1) |
| for { |
| const skipLog = 7 |
| const doEvery = 1 |
| |
| nextS := s |
| var l int32 |
| var t int32 |
| for { |
| nextHashS := hashLen(cv, tableBits, hashShortBytes) |
| nextHashL := hash7(cv, tableBits) |
| s = nextS |
| nextS = s + doEvery + (s-nextEmit)>>skipLog |
| if nextS > sLimit { |
| goto emitRemainder |
| } |
| // Fetch a short+long candidate |
| sCandidate := e.table[nextHashS] |
| lCandidate := e.bTable[nextHashL] |
| next := load6432(src, nextS) |
| entry := tableEntry{offset: s + e.cur} |
| e.table[nextHashS] = entry |
| eLong := &e.bTable[nextHashL] |
| eLong.Cur, eLong.Prev = entry, eLong.Cur |
| |
| // Calculate hashes of 'next' |
| nextHashS = hashLen(next, tableBits, hashShortBytes) |
| nextHashL = hash7(next, tableBits) |
| |
| t = lCandidate.Cur.offset - e.cur |
| if s-t < maxMatchOffset { |
| if uint32(cv) == load3232(src, t) { |
| // Long candidate matches at least 4 bytes. |
| |
| // Store the next match |
| e.table[nextHashS] = tableEntry{offset: nextS + e.cur} |
| eLong := &e.bTable[nextHashL] |
| eLong.Cur, eLong.Prev = tableEntry{offset: nextS + e.cur}, eLong.Cur |
| |
| // Check the previous long candidate as well. |
| t2 := lCandidate.Prev.offset - e.cur |
| if s-t2 < maxMatchOffset && uint32(cv) == load3232(src, t2) { |
| l = e.matchlen(int(s+4), int(t+4), src) + 4 |
| ml1 := e.matchlen(int(s+4), int(t2+4), src) + 4 |
| if ml1 > l { |
| t = t2 |
| l = ml1 |
| break |
| } |
| } |
| break |
| } |
| // Current value did not match, but check if previous long value does. |
| t = lCandidate.Prev.offset - e.cur |
| if s-t < maxMatchOffset && uint32(cv) == load3232(src, t) { |
| // Store the next match |
| e.table[nextHashS] = tableEntry{offset: nextS + e.cur} |
| eLong := &e.bTable[nextHashL] |
| eLong.Cur, eLong.Prev = tableEntry{offset: nextS + e.cur}, eLong.Cur |
| break |
| } |
| } |
| |
| t = sCandidate.offset - e.cur |
| if s-t < maxMatchOffset && uint32(cv) == load3232(src, t) { |
| // Found a 4 match... |
| l = e.matchlen(int(s+4), int(t+4), src) + 4 |
| |
| // Look up next long candidate (at nextS) |
| lCandidate = e.bTable[nextHashL] |
| |
| // Store the next match |
| e.table[nextHashS] = tableEntry{offset: nextS + e.cur} |
| eLong := &e.bTable[nextHashL] |
| eLong.Cur, eLong.Prev = tableEntry{offset: nextS + e.cur}, eLong.Cur |
| |
| // Check repeat at s + repOff |
| const repOff = 1 |
| t2 := s - repeat + repOff |
| if load3232(src, t2) == uint32(cv>>(8*repOff)) { |
| ml := e.matchlen(int(s+4+repOff), int(t2+4), src) + 4 |
| if ml > l { |
| t = t2 |
| l = ml |
| s += repOff |
| // Not worth checking more. |
| break |
| } |
| } |
| |
| // If the next long is a candidate, use that... |
| t2 = lCandidate.Cur.offset - e.cur |
| if nextS-t2 < maxMatchOffset { |
| if load3232(src, t2) == uint32(next) { |
| ml := e.matchlen(int(nextS+4), int(t2+4), src) + 4 |
| if ml > l { |
| t = t2 |
| s = nextS |
| l = ml |
| // This is ok, but check previous as well. |
| } |
| } |
| // If the previous long is a candidate, use that... |
| t2 = lCandidate.Prev.offset - e.cur |
| if nextS-t2 < maxMatchOffset && load3232(src, t2) == uint32(next) { |
| ml := e.matchlen(int(nextS+4), int(t2+4), src) + 4 |
| if ml > l { |
| t = t2 |
| s = nextS |
| l = ml |
| break |
| } |
| } |
| } |
| break |
| } |
| cv = next |
| } |
| |
| // A 4-byte match has been found. We'll later see if more than 4 bytes |
| // match. But, prior to the match, src[nextEmit:s] are unmatched. Emit |
| // them as literal bytes. |
| |
| // Extend the 4-byte match as long as possible. |
| if l == 0 { |
| l = e.matchlenLong(int(s+4), int(t+4), src) + 4 |
| } else if l == maxMatchLength { |
| l += e.matchlenLong(int(s+l), int(t+l), src) |
| } |
| |
| // Try to locate a better match by checking the end-of-match... |
| if sAt := s + l; sAt < sLimit { |
| // Allow some bytes at the beginning to mismatch. |
| // Sweet spot is 2/3 bytes depending on input. |
| // 3 is only a little better when it is but sometimes a lot worse. |
| // The skipped bytes are tested in Extend backwards, |
| // and still picked up as part of the match if they do. |
| const skipBeginning = 2 |
| eLong := &e.bTable[hash7(load6432(src, sAt), tableBits)] |
| // Test current |
| t2 := eLong.Cur.offset - e.cur - l + skipBeginning |
| s2 := s + skipBeginning |
| off := s2 - t2 |
| if off < maxMatchOffset { |
| if off > 0 && t2 >= 0 { |
| if l2 := e.matchlenLong(int(s2), int(t2), src); l2 > l { |
| t = t2 |
| l = l2 |
| s = s2 |
| } |
| } |
| // Test next: |
| t2 = eLong.Prev.offset - e.cur - l + skipBeginning |
| off := s2 - t2 |
| if off > 0 && off < maxMatchOffset && t2 >= 0 { |
| if l2 := e.matchlenLong(int(s2), int(t2), src); l2 > l { |
| t = t2 |
| l = l2 |
| s = s2 |
| } |
| } |
| } |
| } |
| |
| // Extend backwards |
| for t > 0 && s > nextEmit && src[t-1] == src[s-1] { |
| s-- |
| t-- |
| l++ |
| } |
| if nextEmit < s { |
| if false { |
| emitLiteral(dst, src[nextEmit:s]) |
| } else { |
| for _, v := range src[nextEmit:s] { |
| dst.tokens[dst.n] = token(v) |
| dst.litHist[v]++ |
| dst.n++ |
| } |
| } |
| } |
| if false { |
| if t >= s { |
| panic(fmt.Sprintln("s-t", s, t)) |
| } |
| if (s - t) > maxMatchOffset { |
| panic(fmt.Sprintln("mmo", s-t)) |
| } |
| if l < baseMatchLength { |
| panic("bml") |
| } |
| } |
| |
| dst.AddMatchLong(l, uint32(s-t-baseMatchOffset)) |
| repeat = s - t |
| s += l |
| nextEmit = s |
| if nextS >= s { |
| s = nextS + 1 |
| } |
| |
| if s >= sLimit { |
| // Index after match end. |
| for i := nextS + 1; i < int32(len(src))-8; i += 2 { |
| cv := load6432(src, i) |
| e.table[hashLen(cv, tableBits, hashShortBytes)] = tableEntry{offset: i + e.cur} |
| eLong := &e.bTable[hash7(cv, tableBits)] |
| eLong.Cur, eLong.Prev = tableEntry{offset: i + e.cur}, eLong.Cur |
| } |
| goto emitRemainder |
| } |
| |
| // Store every long hash in-between and every second short. |
| if true { |
| for i := nextS + 1; i < s-1; i += 2 { |
| cv := load6432(src, i) |
| t := tableEntry{offset: i + e.cur} |
| t2 := tableEntry{offset: t.offset + 1} |
| eLong := &e.bTable[hash7(cv, tableBits)] |
| eLong2 := &e.bTable[hash7(cv>>8, tableBits)] |
| e.table[hashLen(cv, tableBits, hashShortBytes)] = t |
| eLong.Cur, eLong.Prev = t, eLong.Cur |
| eLong2.Cur, eLong2.Prev = t2, eLong2.Cur |
| } |
| } |
| |
| // We could immediately start working at s now, but to improve |
| // compression we first update the hash table at s-1 and at s. |
| cv = load6432(src, s) |
| } |
| |
| emitRemainder: |
| if int(nextEmit) < len(src) { |
| // If nothing was added, don't encode literals. |
| if dst.n == 0 { |
| return |
| } |
| |
| emitLiteral(dst, src[nextEmit:]) |
| } |
| } |