)]}'
{
  "commit": "f34da5972201ed4f59545a8c5011058907d3c6a6",
  "tree": "62356a58ff16f2adbb95809903267fd1cd697676",
  "parents": [
    "25299bef4401b7c321bf0f4e5ebec862ae64cc3b"
  ],
  "author": {
    "name": "Shad Ansari",
    "email": "shad@opennetworking.org",
    "time": "Wed Feb 13 23:05:35 2019 -0800"
  },
  "committer": {
    "name": "Shad Ansari",
    "email": "shad@opennetworking.org",
    "time": "Fri Feb 15 06:04:08 2019 +0000"
  },
  "message": "VOL-1352 - Use serial_number reported by device instead of host:port.\n\nCurrently the logical device\u0027s serial number is set to the\nhost:port of the olt. This was done since the device\u0027s\nserial number was not reported by the openolt agent.\nSince the openolt agent now reports the actual device serial\nnumber, this commit makes it a requirement to use the\ndevice\u0027s serial number in the onos config.\n\nThis change will require onos sadis config to specify\nthe serial number instead of host:port:\n\n                \"entries\" : [\n                    {\n                        \"id\" : \"EC1721000216\",\n                        \"hardwareIdentifier\" : \"de:ad:be:ef:ba:11\",\n                        \"uplinkPort\" : 65536\n                    },\n\nThis commit requires the corresponsing openolt agent change which\nprovides the serial number in the device_info:\n\ncommit 42bc6ec6af647ebd42e690c0e28e1d5623ab912f\nAuthor: Thiyagarajan Subramani \u003cThiyagarajan.Subramani@radisys.com\u003e\nDate:   Sat Feb 2 03:21:43 2019 -0800\n\n    VOL-1392: OpenOLT driver should send the actual device serial number\n\n    Change-Id: I1c9703568bc85f7e8e3c62313a4a9abaa9d7b1e7\n\nChange-Id: I9a40717baf6ca23d6a1171d4e79f49a0c5175133\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "0b8ec621f772a86c5dc3cfbafc582bc8cb251680",
      "old_mode": 33188,
      "old_path": "voltha/adapters/openolt/openolt_device.py",
      "new_id": "ac6489e1d239b800aebcb0163563feb8473c090d",
      "new_mode": 33188,
      "new_path": "voltha/adapters/openolt/openolt_device.py"
    }
  ]
}