diff --git a/install/ConfigVagrantTesting.sh b/install/ConfigVagrantTesting.sh
new file mode 100755
index 0000000..3a9b06d
--- /dev/null
+++ b/install/ConfigVagrantTesting.sh
@@ -0,0 +1,148 @@
+#!/bin/bash
+
+baseImage="Ubuntu1604LTS"
+iVmName="Ubuntu1604LTS-1"
+iVmNetwork="vagrant-libvirt"
+shutdownTimeout=5
+ipTimeout=10
+
+lBlue='\033[1;34m'
+green='\033[0;32m'
+orange='\033[0;33m'
+NC='\033[0m'
+red='\033[0;31m'
+yellow='\033[1;33m'
+dGrey='\033[1;30m'
+lGrey='\033[1;37m'
+lCyan='\033[1;36m'
+
+# Shut down the domain in case it's running.
+#echo -e "${lBlue}Shut down the ${lCyan}$iVmName${lBlue} VM if running${NC}"
+#ctr=0
+#vStat=`virsh list | grep $iVmName`
+#while [ ! -z "$vStat" ];
+#do
+#	virsh shutdown $iVmName
+#	echo "Waiting for $iVmName to shut down"
+#	sleep 2
+#	vStat=`virsh list | grep $iVmName`
+#	ctr=`expr $ctr + 1`
+#	if [ $ctr -eq $shutdownTimeout ]; then
+#		echo -e "${red}Tired of waiting, forcing the VM off${NC}"
+#		virsh destroy $iVmName
+#		vStat=`virsh list | grep $iVmName`
+#	fi
+#done
+
+
+# Delete the VM and ignore any errors should they occur
+#echo -e "${lBlue}Undefining the ${lCyan}$iVmName${lBlue} domain${NC}"
+#virsh undefine $iVmName
+
+# Remove the associated volume
+#echo -e "${lBlue}Removing the ${lCyan}$iVmName.qcow2${lBlue} volume${NC}"
+#virsh vol-delete "${iVmName}.qcow2" default
+
+# Clone the base vanilla ubuntu install
+#echo -e "${lBlue}Cloning the ${lCyan}$baseImage.qcow2${lBlue} to ${lCyan}$iVmName.qcow2${NC}"
+#virsh vol-clone "${baseImage}.qcow2" "${iVmName}.qcow2" default
+
+# Create the xml file and define the VM for virsh
+#echo -e "${lBlue}Defining the  ${lCyan}$iVmName${lBlue} virtual machine${NC}"
+#cat vmTemplate.xml | sed -e "s/{{VMName}}/$iVmName/g" | sed -e "s/{{VMNetwork}}/$iVmNetwork/g" > tmp.xml
+
+#virsh define tmp.xml
+
+#rm tmp.xml
+
+# Start the VMm, if it's already running just ignore the error
+#echo -e "${lBlue}Starting the ${lCyan}$iVmName${lBlue} virtual machine${NC}"
+#virsh start $iVmName > /dev/null 2>&1
+
+
+# Configure ansible's key for communicating with the VMs... Testing only, this will
+# be taken care of by the installer in the future.
+for i in install_ha-serv1 install_ha-serv2 install_ha-serv3
+do
+	ipAddr=`virsh domifaddr $i | tail -n +3 | awk '{ print $4 }' | sed -e 's~/.*~~'`
+	m=`echo $i | sed -e 's/install_//'`
+	echo "ansible_ssh_private_key_file: .vagrant/machines/$m/libvirt/private_key" > ansible/host_vars/$ipAddr
+done
+
+exit
+
+echo -e "${lBlue}Generating the key-pair for communication with the VM${NC}"
+ssh-keygen -f ./key -t rsa -N ''
+
+mv key key.pem
+
+# Clone BashLogin.sh and add the public key to it for later use.
+echo -e "${lBlue}Creating the pre-configuration script${NC}"
+cp BashLogin.sh bash_login.sh
+echo "cat <<HERE > .ssh/authorized_keys" >> bash_login.sh
+cat key.pub >> bash_login.sh
+echo "HERE" >> bash_login.sh
+echo "chmod 400 .ssh/authorized_keys" >> bash_login.sh
+echo "rm .bash_login" >> bash_login.sh
+echo "logout" >> bash_login.sh
+rm key.pub
+
+
+
+# Get the VM's IP address
+ctr=0
+ipAddr=""
+while [ -z "$ipAddr" ];
+do
+	echo -e "${lBlue}Waiting for the VM's IP address${NC}"
+	ipAddr=`virsh domifaddr $iVmName | tail -n +3 | awk '{ print $4 }' | sed -e 's~/.*~~'`
+	sleep 2
+	if [ $ctr -eq $ipTimeout ]; then
+		echo -e "${red}Tired of waiting, please adjust the ipTimeout if the VM is slow to start${NC}"
+		exit
+	fi
+	ctr=`expr $ctr + 1`
+done
+
+echo -e "${lBlue}The IP address is: ${lCyan}$ipAddr${NC}"
+
+# Copy the pre-config file to the VM
+echo -e "${lBlue}Transfering pre-configuration script to the VM${NC}"
+scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no bash_login.sh vinstall@$ipAddr:.bash_login
+
+rm bash_login.sh
+
+# Run the pre-config file on the VM
+echo -e "${lBlue}Running the pre-configuration script on the VM${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no vinstall@$ipAddr 
+
+# Make sure the VM is up-to-date
+echo -e "${lBlue}Ensure that the VM is up-to-date${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get update 
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get -y upgrade 
+
+# Create the docker.cfg file in the ansible tree using the VMs IP address
+echo 'DOCKER_OPTS="$DOCKER_OPTS --insecure-registry '$ipAddr':5000 -H tcp://0.0.0.0:2375 -H unix:///var/run/docker.sock --registry-mirror=http://'$ipAddr':5001"' > ansible/roles/docker/templates/docker.cfg
+
+# Install ansible on the vm, it'll be used both here and for the install
+echo -e "${lBlue}Installing ansible on the VM${NC}"
+#ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get install software-properties-common
+#ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-add-repository ppa:ansible/ansible
+#ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get update
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get -y install ansible
+
+# Copy the ansible files to the VM
+echo -e "${lBlue}Transferring the ansible directory to the VM${NC}"
+scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem -r ansible vinstall@$ipAddr:ansible
+
+# Get the GPG key for docker otherwise ansible calls break
+echo -e "${lBlue}Get the GPG key for docker to allow ansible playbooks to run successfully${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr "sudo apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D"
+
+# Bootstrap ansible
+echo -e "${lBlue}Bootstrap ansible${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr ansible/scripts/bootstrap_ansible.sh
+
+# Run the ansible script to initialize the installer environment
+echo -e "${lBlue}Run the nsible playbook for the installer${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo PYTHONUNBUFFERED=1 ansible-playbook /home/vinstall/ansible/volthainstall.yml -c local