diff --git a/vendor/google.golang.org/grpc/balancer/balancer.go b/vendor/google.golang.org/grpc/balancer/balancer.go
index 917c242..b126401 100644
--- a/vendor/google.golang.org/grpc/balancer/balancer.go
+++ b/vendor/google.golang.org/grpc/balancer/balancer.go
@@ -27,8 +27,11 @@
 	"net"
 	"strings"
 
+	"google.golang.org/grpc/channelz"
 	"google.golang.org/grpc/connectivity"
 	"google.golang.org/grpc/credentials"
+	estats "google.golang.org/grpc/experimental/stats"
+	"google.golang.org/grpc/grpclog"
 	"google.golang.org/grpc/internal"
 	"google.golang.org/grpc/metadata"
 	"google.golang.org/grpc/resolver"
@@ -38,6 +41,8 @@
 var (
 	// m is a map from name to balancer builder.
 	m = make(map[string]Builder)
+
+	logger = grpclog.Component("balancer")
 )
 
 // Register registers the balancer builder to the balancer map. b.Name
@@ -50,7 +55,14 @@
 // an init() function), and is not thread-safe. If multiple Balancers are
 // registered with the same name, the one registered last will take effect.
 func Register(b Builder) {
-	m[strings.ToLower(b.Name())] = b
+	name := strings.ToLower(b.Name())
+	if name != b.Name() {
+		// TODO: Skip the use of strings.ToLower() to index the map after v1.59
+		// is released to switch to case sensitive balancer registry. Also,
+		// remove this warning and update the docstrings for Register and Get.
+		logger.Warningf("Balancer registered with name %q. grpc-go will be switching to case sensitive balancer registries soon", b.Name())
+	}
+	m[name] = b
 }
 
 // unregisterForTesting deletes the balancer with the given name from the
@@ -63,58 +75,52 @@
 
 func init() {
 	internal.BalancerUnregister = unregisterForTesting
+	internal.ConnectedAddress = connectedAddress
+	internal.SetConnectedAddress = setConnectedAddress
 }
 
 // Get returns the resolver builder registered with the given name.
 // Note that the compare is done in a case-insensitive fashion.
 // If no builder is register with the name, nil will be returned.
 func Get(name string) Builder {
+	if strings.ToLower(name) != name {
+		// TODO: Skip the use of strings.ToLower() to index the map after v1.59
+		// is released to switch to case sensitive balancer registry. Also,
+		// remove this warning and update the docstrings for Register and Get.
+		logger.Warningf("Balancer retrieved for name %q. grpc-go will be switching to case sensitive balancer registries soon", name)
+	}
 	if b, ok := m[strings.ToLower(name)]; ok {
 		return b
 	}
 	return nil
 }
 
-// SubConn represents a gRPC sub connection.
-// Each sub connection contains a list of addresses. gRPC will
-// try to connect to them (in sequence), and stop trying the
-// remainder once one connection is successful.
-//
-// The reconnect backoff will be applied on the list, not a single address.
-// For example, try_on_all_addresses -> backoff -> try_on_all_addresses.
-//
-// All SubConns start in IDLE, and will not try to connect. To trigger
-// the connecting, Balancers must call Connect.
-// When the connection encounters an error, it will reconnect immediately.
-// When the connection becomes IDLE, it will not reconnect unless Connect is
-// called.
-//
-// This interface is to be implemented by gRPC. Users should not need a
-// brand new implementation of this interface. For the situations like
-// testing, the new implementation should embed this interface. This allows
-// gRPC to add new methods to this interface.
-type SubConn interface {
-	// UpdateAddresses updates the addresses used in this SubConn.
-	// gRPC checks if currently-connected address is still in the new list.
-	// If it's in the list, the connection will be kept.
-	// If it's not in the list, the connection will gracefully closed, and
-	// a new connection will be created.
-	//
-	// This will trigger a state transition for the SubConn.
-	UpdateAddresses([]resolver.Address)
-	// Connect starts the connecting for this SubConn.
-	Connect()
-}
-
 // NewSubConnOptions contains options to create new SubConn.
 type NewSubConnOptions struct {
 	// CredsBundle is the credentials bundle that will be used in the created
 	// SubConn. If it's nil, the original creds from grpc DialOptions will be
 	// used.
+	//
+	// Deprecated: Use the Attributes field in resolver.Address to pass
+	// arbitrary data to the credential handshaker.
 	CredsBundle credentials.Bundle
 	// HealthCheckEnabled indicates whether health check service should be
 	// enabled on this SubConn
 	HealthCheckEnabled bool
+	// StateListener is called when the state of the subconn changes.  If nil,
+	// Balancer.UpdateSubConnState will be called instead.  Will never be
+	// invoked until after Connect() is called on the SubConn created with
+	// these options.
+	StateListener func(SubConnState)
+}
+
+// State contains the balancer's state relevant to the gRPC ClientConn.
+type State struct {
+	// State contains the connectivity state of the balancer, which is used to
+	// determine the state of the ClientConn.
+	ConnectivityState connectivity.State
+	// Picker is used to choose connections (SubConns) for RPCs.
+	Picker Picker
 }
 
 // ClientConn represents a gRPC ClientConn.
@@ -123,48 +129,92 @@
 // brand new implementation of this interface. For the situations like
 // testing, the new implementation should embed this interface. This allows
 // gRPC to add new methods to this interface.
+//
+// NOTICE: This interface is intended to be implemented by gRPC, or intercepted
+// by custom load balancing polices.  Users should not need their own complete
+// implementation of this interface -- they should always delegate to a
+// ClientConn passed to Builder.Build() by embedding it in their
+// implementations. An embedded ClientConn must never be nil, or runtime panics
+// will occur.
 type ClientConn interface {
 	// NewSubConn is called by balancer to create a new SubConn.
 	// It doesn't block and wait for the connections to be established.
 	// Behaviors of the SubConn can be controlled by options.
+	//
+	// Deprecated: please be aware that in a future version, SubConns will only
+	// support one address per SubConn.
 	NewSubConn([]resolver.Address, NewSubConnOptions) (SubConn, error)
 	// RemoveSubConn removes the SubConn from ClientConn.
 	// The SubConn will be shutdown.
-	RemoveSubConn(SubConn)
-
-	// UpdateBalancerState is called by balancer to notify gRPC that some internal
-	// state in balancer has changed.
 	//
-	// gRPC will update the connectivity state of the ClientConn, and will call pick
-	// on the new picker to pick new SubConn.
-	UpdateBalancerState(s connectivity.State, p Picker)
+	// Deprecated: use SubConn.Shutdown instead.
+	RemoveSubConn(SubConn)
+	// UpdateAddresses updates the addresses used in the passed in SubConn.
+	// gRPC checks if the currently connected address is still in the new list.
+	// If so, the connection will be kept. Else, the connection will be
+	// gracefully closed, and a new connection will be created.
+	//
+	// This may trigger a state transition for the SubConn.
+	//
+	// Deprecated: this method will be removed.  Create new SubConns for new
+	// addresses instead.
+	UpdateAddresses(SubConn, []resolver.Address)
+
+	// UpdateState notifies gRPC that the balancer's internal state has
+	// changed.
+	//
+	// gRPC will update the connectivity state of the ClientConn, and will call
+	// Pick on the new Picker to pick new SubConns.
+	UpdateState(State)
 
 	// ResolveNow is called by balancer to notify gRPC to do a name resolving.
-	ResolveNow(resolver.ResolveNowOption)
+	ResolveNow(resolver.ResolveNowOptions)
 
 	// Target returns the dial target for this ClientConn.
 	//
 	// Deprecated: Use the Target field in the BuildOptions instead.
 	Target() string
+
+	// MetricsRecorder provides the metrics recorder that balancers can use to
+	// record metrics. Balancer implementations which do not register metrics on
+	// metrics registry and record on them can ignore this method. The returned
+	// MetricsRecorder is guaranteed to never be nil.
+	MetricsRecorder() estats.MetricsRecorder
+
+	// EnforceClientConnEmbedding is included to force implementers to embed
+	// another implementation of this interface, allowing gRPC to add methods
+	// without breaking users.
+	internal.EnforceClientConnEmbedding
 }
 
 // BuildOptions contains additional information for Build.
 type BuildOptions struct {
-	// DialCreds is the transport credential the Balancer implementation can
-	// use to dial to a remote load balancer server. The Balancer implementations
-	// can ignore this if it does not need to talk to another party securely.
+	// DialCreds is the transport credentials to use when communicating with a
+	// remote load balancer server. Balancer implementations which do not
+	// communicate with a remote load balancer server can ignore this field.
 	DialCreds credentials.TransportCredentials
-	// CredsBundle is the credentials bundle that the Balancer can use.
+	// CredsBundle is the credentials bundle to use when communicating with a
+	// remote load balancer server. Balancer implementations which do not
+	// communicate with a remote load balancer server can ignore this field.
 	CredsBundle credentials.Bundle
-	// Dialer is the custom dialer the Balancer implementation can use to dial
-	// to a remote load balancer server. The Balancer implementations
-	// can ignore this if it doesn't need to talk to remote balancer.
+	// Dialer is the custom dialer to use when communicating with a remote load
+	// balancer server. Balancer implementations which do not communicate with a
+	// remote load balancer server can ignore this field.
 	Dialer func(context.Context, string) (net.Conn, error)
-	// ChannelzParentID is the entity parent's channelz unique identification number.
-	ChannelzParentID int64
-	// Target contains the parsed address info of the dial target. It is the same resolver.Target as
-	// passed to the resolver.
-	// See the documentation for the resolver.Target type for details about what it contains.
+	// Authority is the server name to use as part of the authentication
+	// handshake when communicating with a remote load balancer server. Balancer
+	// implementations which do not communicate with a remote load balancer
+	// server can ignore this field.
+	Authority string
+	// ChannelzParent is the parent ClientConn's channelz channel.
+	ChannelzParent channelz.Identifier
+	// CustomUserAgent is the custom user agent set on the parent ClientConn.
+	// The balancer should set the same custom user agent if it creates a
+	// ClientConn.
+	CustomUserAgent string
+	// Target contains the parsed address info of the dial target. It is the
+	// same resolver.Target as passed to the resolver. See the documentation for
+	// the resolver.Target type for details about what it contains.
 	Target resolver.Target
 }
 
@@ -185,11 +235,14 @@
 	ParseConfig(LoadBalancingConfigJSON json.RawMessage) (serviceconfig.LoadBalancingConfig, error)
 }
 
-// PickOptions contains addition information for the Pick operation.
-type PickOptions struct {
+// PickInfo contains additional information for the Pick operation.
+type PickInfo struct {
 	// FullMethodName is the method name that NewClientStream() is called
 	// with. The canonical format is /service/Method.
 	FullMethodName string
+	// Ctx is the RPC's context, and may contain relevant RPC-level information
+	// like the outgoing header metadata.
+	Ctx context.Context
 }
 
 // DoneInfo contains additional information for done.
@@ -205,56 +258,79 @@
 	// ServerLoad is the load received from server. It's usually sent as part of
 	// trailing metadata.
 	//
-	// The only supported type now is *orca_v1.LoadReport.
-	ServerLoad interface{}
+	// The only supported type now is *orca_v3.LoadReport.
+	ServerLoad any
 }
 
 var (
 	// ErrNoSubConnAvailable indicates no SubConn is available for pick().
-	// gRPC will block the RPC until a new picker is available via UpdateBalancerState().
+	// gRPC will block the RPC until a new picker is available via UpdateState().
 	ErrNoSubConnAvailable = errors.New("no SubConn is available")
 	// ErrTransientFailure indicates all SubConns are in TransientFailure.
 	// WaitForReady RPCs will block, non-WaitForReady RPCs will fail.
+	//
+	// Deprecated: return an appropriate error based on the last resolution or
+	// connection attempt instead.  The behavior is the same for any non-gRPC
+	// status error.
 	ErrTransientFailure = errors.New("all SubConns are in TransientFailure")
 )
 
+// PickResult contains information related to a connection chosen for an RPC.
+type PickResult struct {
+	// SubConn is the connection to use for this pick, if its state is Ready.
+	// If the state is not Ready, gRPC will block the RPC until a new Picker is
+	// provided by the balancer (using ClientConn.UpdateState).  The SubConn
+	// must be one returned by ClientConn.NewSubConn.
+	SubConn SubConn
+
+	// Done is called when the RPC is completed.  If the SubConn is not ready,
+	// this will be called with a nil parameter.  If the SubConn is not a valid
+	// type, Done may not be called.  May be nil if the balancer does not wish
+	// to be notified when the RPC completes.
+	Done func(DoneInfo)
+
+	// Metadata provides a way for LB policies to inject arbitrary per-call
+	// metadata. Any metadata returned here will be merged with existing
+	// metadata added by the client application.
+	//
+	// LB policies with child policies are responsible for propagating metadata
+	// injected by their children to the ClientConn, as part of Pick().
+	Metadata metadata.MD
+}
+
+// TransientFailureError returns e.  It exists for backward compatibility and
+// will be deleted soon.
+//
+// Deprecated: no longer necessary, picker errors are treated this way by
+// default.
+func TransientFailureError(e error) error { return e }
+
 // Picker is used by gRPC to pick a SubConn to send an RPC.
 // Balancer is expected to generate a new picker from its snapshot every time its
 // internal state has changed.
 //
-// The pickers used by gRPC can be updated by ClientConn.UpdateBalancerState().
+// The pickers used by gRPC can be updated by ClientConn.UpdateState().
 type Picker interface {
-	// Pick returns the SubConn to be used to send the RPC.
-	// The returned SubConn must be one returned by NewSubConn().
+	// Pick returns the connection to use for this RPC and related information.
 	//
-	// This functions is expected to return:
-	// - a SubConn that is known to be READY;
-	// - ErrNoSubConnAvailable if no SubConn is available, but progress is being
-	//   made (for example, some SubConn is in CONNECTING mode);
-	// - other errors if no active connecting is happening (for example, all SubConn
-	//   are in TRANSIENT_FAILURE mode).
+	// Pick should not block.  If the balancer needs to do I/O or any blocking
+	// or time-consuming work to service this call, it should return
+	// ErrNoSubConnAvailable, and the Pick call will be repeated by gRPC when
+	// the Picker is updated (using ClientConn.UpdateState).
 	//
-	// If a SubConn is returned:
-	// - If it is READY, gRPC will send the RPC on it;
-	// - If it is not ready, or becomes not ready after it's returned, gRPC will
-	//   block until UpdateBalancerState() is called and will call pick on the
-	//   new picker. The done function returned from Pick(), if not nil, will be
-	//   called with nil error, no bytes sent and no bytes received.
+	// If an error is returned:
 	//
-	// If the returned error is not nil:
-	// - If the error is ErrNoSubConnAvailable, gRPC will block until UpdateBalancerState()
-	// - If the error is ErrTransientFailure:
-	//   - If the RPC is wait-for-ready, gRPC will block until UpdateBalancerState()
-	//     is called to pick again;
-	//   - Otherwise, RPC will fail with unavailable error.
-	// - Else (error is other non-nil error):
-	//   - The RPC will fail with unavailable error.
+	// - If the error is ErrNoSubConnAvailable, gRPC will block until a new
+	//   Picker is provided by the balancer (using ClientConn.UpdateState).
 	//
-	// The returned done() function will be called once the rpc has finished,
-	// with the final status of that RPC.  If the SubConn returned is not a
-	// valid SubConn type, done may not be called.  done may be nil if balancer
-	// doesn't care about the RPC status.
-	Pick(ctx context.Context, opts PickOptions) (conn SubConn, done func(DoneInfo), err error)
+	// - If the error is a status error (implemented by the grpc/status
+	//   package), gRPC will terminate the RPC with the code and message
+	//   provided.
+	//
+	// - For all other errors, wait for ready RPCs will wait, but non-wait for
+	//   ready RPCs will be terminated with this error's Error() string and
+	//   status code Unavailable.
+	Pick(info PickInfo) (PickResult, error)
 }
 
 // Balancer takes input from gRPC, manages SubConns, and collects and aggregates
@@ -262,38 +338,46 @@
 //
 // It also generates and updates the Picker used by gRPC to pick SubConns for RPCs.
 //
-// HandleSubConnectionStateChange, HandleResolvedAddrs and Close are guaranteed
-// to be called synchronously from the same goroutine.
-// There's no guarantee on picker.Pick, it may be called anytime.
+// UpdateClientConnState, ResolverError, UpdateSubConnState, and Close are
+// guaranteed to be called synchronously from the same goroutine.  There's no
+// guarantee on picker.Pick, it may be called anytime.
 type Balancer interface {
-	// HandleSubConnStateChange is called by gRPC when the connectivity state
-	// of sc has changed.
-	// Balancer is expected to aggregate all the state of SubConn and report
-	// that back to gRPC.
-	// Balancer should also generate and update Pickers when its internal state has
-	// been changed by the new state.
+	// UpdateClientConnState is called by gRPC when the state of the ClientConn
+	// changes.  If the error returned is ErrBadResolverState, the ClientConn
+	// will begin calling ResolveNow on the active name resolver with
+	// exponential backoff until a subsequent call to UpdateClientConnState
+	// returns a nil error.  Any other errors are currently ignored.
+	UpdateClientConnState(ClientConnState) error
+	// ResolverError is called by gRPC when the name resolver reports an error.
+	ResolverError(error)
+	// UpdateSubConnState is called by gRPC when the state of a SubConn
+	// changes.
 	//
-	// Deprecated: if V2Balancer is implemented by the Balancer,
-	// UpdateSubConnState will be called instead.
-	HandleSubConnStateChange(sc SubConn, state connectivity.State)
-	// HandleResolvedAddrs is called by gRPC to send updated resolved addresses to
-	// balancers.
-	// Balancer can create new SubConn or remove SubConn with the addresses.
-	// An empty address slice and a non-nil error will be passed if the resolver returns
-	// non-nil error to gRPC.
-	//
-	// Deprecated: if V2Balancer is implemented by the Balancer,
-	// UpdateClientConnState will be called instead.
-	HandleResolvedAddrs([]resolver.Address, error)
-	// Close closes the balancer. The balancer is not required to call
-	// ClientConn.RemoveSubConn for its existing SubConns.
+	// Deprecated: Use NewSubConnOptions.StateListener when creating the
+	// SubConn instead.
+	UpdateSubConnState(SubConn, SubConnState)
+	// Close closes the balancer. The balancer is not currently required to
+	// call SubConn.Shutdown for its existing SubConns; however, this will be
+	// required in a future release, so it is recommended.
 	Close()
+	// ExitIdle instructs the LB policy to reconnect to backends / exit the
+	// IDLE state, if appropriate and possible.  Note that SubConns that enter
+	// the IDLE state will not reconnect until SubConn.Connect is called.
+	ExitIdle()
 }
 
-// SubConnState describes the state of a SubConn.
-type SubConnState struct {
-	ConnectivityState connectivity.State
-	// TODO: add last connection error
+// ExitIdler is an optional interface for balancers to implement.  If
+// implemented, ExitIdle will be called when ClientConn.Connect is called, if
+// the ClientConn is idle.  If unimplemented, ClientConn.Connect will cause
+// all SubConns to connect.
+//
+// Deprecated: All balancers must implement this interface. This interface will
+// be removed in a future release.
+type ExitIdler interface {
+	// ExitIdle instructs the LB policy to reconnect to backends / exit the
+	// IDLE state, if appropriate and possible.  Note that SubConns that enter
+	// the IDLE state will not reconnect until SubConn.Connect is called.
+	ExitIdle()
 }
 
 // ClientConnState describes the state of a ClientConn relevant to the
@@ -308,66 +392,3 @@
 // ErrBadResolverState may be returned by UpdateClientConnState to indicate a
 // problem with the provided name resolver data.
 var ErrBadResolverState = errors.New("bad resolver state")
-
-// V2Balancer is defined for documentation purposes.  If a Balancer also
-// implements V2Balancer, its UpdateClientConnState method will be called
-// instead of HandleResolvedAddrs and its UpdateSubConnState will be called
-// instead of HandleSubConnStateChange.
-type V2Balancer interface {
-	// UpdateClientConnState is called by gRPC when the state of the ClientConn
-	// changes.  If the error returned is ErrBadResolverState, the ClientConn
-	// will begin calling ResolveNow on the active name resolver with
-	// exponential backoff until a subsequent call to UpdateClientConnState
-	// returns a nil error.  Any other errors are currently ignored.
-	UpdateClientConnState(ClientConnState) error
-	// ResolverError is called by gRPC when the name resolver reports an error.
-	ResolverError(error)
-	// UpdateSubConnState is called by gRPC when the state of a SubConn
-	// changes.
-	UpdateSubConnState(SubConn, SubConnState)
-	// Close closes the balancer. The balancer is not required to call
-	// ClientConn.RemoveSubConn for its existing SubConns.
-	Close()
-}
-
-// ConnectivityStateEvaluator takes the connectivity states of multiple SubConns
-// and returns one aggregated connectivity state.
-//
-// It's not thread safe.
-type ConnectivityStateEvaluator struct {
-	numReady            uint64 // Number of addrConns in ready state.
-	numConnecting       uint64 // Number of addrConns in connecting state.
-	numTransientFailure uint64 // Number of addrConns in transientFailure.
-}
-
-// RecordTransition records state change happening in subConn and based on that
-// it evaluates what aggregated state should be.
-//
-//  - If at least one SubConn in Ready, the aggregated state is Ready;
-//  - Else if at least one SubConn in Connecting, the aggregated state is Connecting;
-//  - Else the aggregated state is TransientFailure.
-//
-// Idle and Shutdown are not considered.
-func (cse *ConnectivityStateEvaluator) RecordTransition(oldState, newState connectivity.State) connectivity.State {
-	// Update counters.
-	for idx, state := range []connectivity.State{oldState, newState} {
-		updateVal := 2*uint64(idx) - 1 // -1 for oldState and +1 for new.
-		switch state {
-		case connectivity.Ready:
-			cse.numReady += updateVal
-		case connectivity.Connecting:
-			cse.numConnecting += updateVal
-		case connectivity.TransientFailure:
-			cse.numTransientFailure += updateVal
-		}
-	}
-
-	// Evaluate.
-	if cse.numReady > 0 {
-		return connectivity.Ready
-	}
-	if cse.numConnecting > 0 {
-		return connectivity.Connecting
-	}
-	return connectivity.TransientFailure
-}
diff --git a/vendor/google.golang.org/grpc/balancer/base/balancer.go b/vendor/google.golang.org/grpc/balancer/base/balancer.go
index 1a5c1aa..4d57687 100644
--- a/vendor/google.golang.org/grpc/balancer/base/balancer.go
+++ b/vendor/google.golang.org/grpc/balancer/base/balancer.go
@@ -19,7 +19,8 @@
 package base
 
 import (
-	"context"
+	"errors"
+	"fmt"
 
 	"google.golang.org/grpc/balancer"
 	"google.golang.org/grpc/connectivity"
@@ -27,34 +28,36 @@
 	"google.golang.org/grpc/resolver"
 )
 
+var logger = grpclog.Component("balancer")
+
 type baseBuilder struct {
 	name          string
 	pickerBuilder PickerBuilder
 	config        Config
 }
 
-func (bb *baseBuilder) Build(cc balancer.ClientConn, opt balancer.BuildOptions) balancer.Balancer {
-	return &baseBalancer{
+func (bb *baseBuilder) Build(cc balancer.ClientConn, _ balancer.BuildOptions) balancer.Balancer {
+	bal := &baseBalancer{
 		cc:            cc,
 		pickerBuilder: bb.pickerBuilder,
 
-		subConns: make(map[resolver.Address]balancer.SubConn),
+		subConns: resolver.NewAddressMapV2[balancer.SubConn](),
 		scStates: make(map[balancer.SubConn]connectivity.State),
 		csEvltr:  &balancer.ConnectivityStateEvaluator{},
-		// Initialize picker to a picker that always return
-		// ErrNoSubConnAvailable, because when state of a SubConn changes, we
-		// may call UpdateBalancerState with this picker.
-		picker: NewErrPicker(balancer.ErrNoSubConnAvailable),
-		config: bb.config,
+		config:   bb.config,
+		state:    connectivity.Connecting,
 	}
+	// Initialize picker to a picker that always returns
+	// ErrNoSubConnAvailable, because when state of a SubConn changes, we
+	// may call UpdateState with this picker.
+	bal.picker = NewErrPicker(balancer.ErrNoSubConnAvailable)
+	return bal
 }
 
 func (bb *baseBuilder) Name() string {
 	return bb.name
 }
 
-var _ balancer.V2Balancer = (*baseBalancer)(nil) // Assert that we implement V2Balancer
-
 type baseBalancer struct {
 	cc            balancer.ClientConn
 	pickerBuilder PickerBuilder
@@ -62,87 +65,145 @@
 	csEvltr *balancer.ConnectivityStateEvaluator
 	state   connectivity.State
 
-	subConns map[resolver.Address]balancer.SubConn
+	subConns *resolver.AddressMapV2[balancer.SubConn]
 	scStates map[balancer.SubConn]connectivity.State
 	picker   balancer.Picker
 	config   Config
+
+	resolverErr error // the last error reported by the resolver; cleared on successful resolution
+	connErr     error // the last connection error; cleared upon leaving TransientFailure
 }
 
-func (b *baseBalancer) HandleResolvedAddrs(addrs []resolver.Address, err error) {
-	panic("not implemented")
-}
+func (b *baseBalancer) ResolverError(err error) {
+	b.resolverErr = err
+	if b.subConns.Len() == 0 {
+		b.state = connectivity.TransientFailure
+	}
 
-func (b *baseBalancer) ResolverError(error) {
-	// Ignore
+	if b.state != connectivity.TransientFailure {
+		// The picker will not change since the balancer does not currently
+		// report an error.
+		return
+	}
+	b.regeneratePicker()
+	b.cc.UpdateState(balancer.State{
+		ConnectivityState: b.state,
+		Picker:            b.picker,
+	})
 }
 
 func (b *baseBalancer) UpdateClientConnState(s balancer.ClientConnState) error {
-	// TODO: handle s.ResolverState.Err (log if not nil) once implemented.
 	// TODO: handle s.ResolverState.ServiceConfig?
-	if grpclog.V(2) {
-		grpclog.Infoln("base.baseBalancer: got new ClientConn state: ", s)
+	if logger.V(2) {
+		logger.Info("base.baseBalancer: got new ClientConn state: ", s)
 	}
+	// Successful resolution; clear resolver error and ensure we return nil.
+	b.resolverErr = nil
 	// addrsSet is the set converted from addrs, it's used for quick lookup of an address.
-	addrsSet := make(map[resolver.Address]struct{})
+	addrsSet := resolver.NewAddressMapV2[any]()
 	for _, a := range s.ResolverState.Addresses {
-		addrsSet[a] = struct{}{}
-		if _, ok := b.subConns[a]; !ok {
+		addrsSet.Set(a, nil)
+		if _, ok := b.subConns.Get(a); !ok {
 			// a is a new address (not existing in b.subConns).
-			sc, err := b.cc.NewSubConn([]resolver.Address{a}, balancer.NewSubConnOptions{HealthCheckEnabled: b.config.HealthCheck})
+			var sc balancer.SubConn
+			opts := balancer.NewSubConnOptions{
+				HealthCheckEnabled: b.config.HealthCheck,
+				StateListener:      func(scs balancer.SubConnState) { b.updateSubConnState(sc, scs) },
+			}
+			sc, err := b.cc.NewSubConn([]resolver.Address{a}, opts)
 			if err != nil {
-				grpclog.Warningf("base.baseBalancer: failed to create new SubConn: %v", err)
+				logger.Warningf("base.baseBalancer: failed to create new SubConn: %v", err)
 				continue
 			}
-			b.subConns[a] = sc
+			b.subConns.Set(a, sc)
 			b.scStates[sc] = connectivity.Idle
+			b.csEvltr.RecordTransition(connectivity.Shutdown, connectivity.Idle)
 			sc.Connect()
 		}
 	}
-	for a, sc := range b.subConns {
+	for _, a := range b.subConns.Keys() {
+		sc, _ := b.subConns.Get(a)
 		// a was removed by resolver.
-		if _, ok := addrsSet[a]; !ok {
-			b.cc.RemoveSubConn(sc)
-			delete(b.subConns, a)
+		if _, ok := addrsSet.Get(a); !ok {
+			sc.Shutdown()
+			b.subConns.Delete(a)
 			// Keep the state of this sc in b.scStates until sc's state becomes Shutdown.
-			// The entry will be deleted in HandleSubConnStateChange.
+			// The entry will be deleted in updateSubConnState.
 		}
 	}
+	// If resolver state contains no addresses, return an error so ClientConn
+	// will trigger re-resolve. Also records this as a resolver error, so when
+	// the overall state turns transient failure, the error message will have
+	// the zero address information.
+	if len(s.ResolverState.Addresses) == 0 {
+		b.ResolverError(errors.New("produced zero addresses"))
+		return balancer.ErrBadResolverState
+	}
+
+	b.regeneratePicker()
+	b.cc.UpdateState(balancer.State{ConnectivityState: b.state, Picker: b.picker})
 	return nil
 }
 
+// mergeErrors builds an error from the last connection error and the last
+// resolver error.  Must only be called if b.state is TransientFailure.
+func (b *baseBalancer) mergeErrors() error {
+	// connErr must always be non-nil unless there are no SubConns, in which
+	// case resolverErr must be non-nil.
+	if b.connErr == nil {
+		return fmt.Errorf("last resolver error: %v", b.resolverErr)
+	}
+	if b.resolverErr == nil {
+		return fmt.Errorf("last connection error: %v", b.connErr)
+	}
+	return fmt.Errorf("last connection error: %v; last resolver error: %v", b.connErr, b.resolverErr)
+}
+
 // regeneratePicker takes a snapshot of the balancer, and generates a picker
 // from it. The picker is
-//  - errPicker with ErrTransientFailure if the balancer is in TransientFailure,
-//  - built by the pickerBuilder with all READY SubConns otherwise.
+//   - errPicker if the balancer is in TransientFailure,
+//   - built by the pickerBuilder with all READY SubConns otherwise.
 func (b *baseBalancer) regeneratePicker() {
 	if b.state == connectivity.TransientFailure {
-		b.picker = NewErrPicker(balancer.ErrTransientFailure)
+		b.picker = NewErrPicker(b.mergeErrors())
 		return
 	}
-	readySCs := make(map[resolver.Address]balancer.SubConn)
+	readySCs := make(map[balancer.SubConn]SubConnInfo)
 
 	// Filter out all ready SCs from full subConn map.
-	for addr, sc := range b.subConns {
+	for _, addr := range b.subConns.Keys() {
+		sc, _ := b.subConns.Get(addr)
 		if st, ok := b.scStates[sc]; ok && st == connectivity.Ready {
-			readySCs[addr] = sc
+			readySCs[sc] = SubConnInfo{Address: addr}
 		}
 	}
-	b.picker = b.pickerBuilder.Build(readySCs)
+	b.picker = b.pickerBuilder.Build(PickerBuildInfo{ReadySCs: readySCs})
 }
 
-func (b *baseBalancer) HandleSubConnStateChange(sc balancer.SubConn, s connectivity.State) {
-	panic("not implemented")
-}
-
+// UpdateSubConnState is a nop because a StateListener is always set in NewSubConn.
 func (b *baseBalancer) UpdateSubConnState(sc balancer.SubConn, state balancer.SubConnState) {
+	logger.Errorf("base.baseBalancer: UpdateSubConnState(%v, %+v) called unexpectedly", sc, state)
+}
+
+func (b *baseBalancer) updateSubConnState(sc balancer.SubConn, state balancer.SubConnState) {
 	s := state.ConnectivityState
-	if grpclog.V(2) {
-		grpclog.Infof("base.baseBalancer: handle SubConn state change: %p, %v", sc, s)
+	if logger.V(2) {
+		logger.Infof("base.baseBalancer: handle SubConn state change: %p, %v", sc, s)
 	}
 	oldS, ok := b.scStates[sc]
 	if !ok {
-		if grpclog.V(2) {
-			grpclog.Infof("base.baseBalancer: got state changes for an unknown SubConn: %p, %v", sc, s)
+		if logger.V(2) {
+			logger.Infof("base.baseBalancer: got state changes for an unknown SubConn: %p, %v", sc, s)
+		}
+		return
+	}
+	if oldS == connectivity.TransientFailure &&
+		(s == connectivity.Connecting || s == connectivity.Idle) {
+		// Once a subconn enters TRANSIENT_FAILURE, ignore subsequent IDLE or
+		// CONNECTING transitions to prevent the aggregated state from being
+		// always CONNECTING when many backends exist but are all down.
+		if s == connectivity.Idle {
+			sc.Connect()
 		}
 		return
 	}
@@ -151,41 +212,51 @@
 	case connectivity.Idle:
 		sc.Connect()
 	case connectivity.Shutdown:
-		// When an address was removed by resolver, b called RemoveSubConn but
-		// kept the sc's state in scStates. Remove state for this sc here.
+		// When an address was removed by resolver, b called Shutdown but kept
+		// the sc's state in scStates. Remove state for this sc here.
 		delete(b.scStates, sc)
+	case connectivity.TransientFailure:
+		// Save error to be reported via picker.
+		b.connErr = state.ConnectionError
 	}
 
-	oldAggrState := b.state
 	b.state = b.csEvltr.RecordTransition(oldS, s)
 
 	// Regenerate picker when one of the following happens:
-	//  - this sc became ready from not-ready
-	//  - this sc became not-ready from ready
-	//  - the aggregated state of balancer became TransientFailure from non-TransientFailure
-	//  - the aggregated state of balancer became non-TransientFailure from TransientFailure
+	//  - this sc entered or left ready
+	//  - the aggregated state of balancer is TransientFailure
+	//    (may need to update error message)
 	if (s == connectivity.Ready) != (oldS == connectivity.Ready) ||
-		(b.state == connectivity.TransientFailure) != (oldAggrState == connectivity.TransientFailure) {
+		b.state == connectivity.TransientFailure {
 		b.regeneratePicker()
 	}
-
-	b.cc.UpdateBalancerState(b.state, b.picker)
+	b.cc.UpdateState(balancer.State{ConnectivityState: b.state, Picker: b.picker})
 }
 
 // Close is a nop because base balancer doesn't have internal state to clean up,
-// and it doesn't need to call RemoveSubConn for the SubConns.
+// and it doesn't need to call Shutdown for the SubConns.
 func (b *baseBalancer) Close() {
 }
 
-// NewErrPicker returns a picker that always returns err on Pick().
+// ExitIdle is a nop because the base balancer attempts to stay connected to
+// all SubConns at all times.
+func (b *baseBalancer) ExitIdle() {
+}
+
+// NewErrPicker returns a Picker that always returns err on Pick().
 func NewErrPicker(err error) balancer.Picker {
 	return &errPicker{err: err}
 }
 
+// NewErrPickerV2 is temporarily defined for backward compatibility reasons.
+//
+// Deprecated: use NewErrPicker instead.
+var NewErrPickerV2 = NewErrPicker
+
 type errPicker struct {
 	err error // Pick() always returns this err.
 }
 
-func (p *errPicker) Pick(ctx context.Context, opts balancer.PickOptions) (balancer.SubConn, func(balancer.DoneInfo), error) {
-	return nil, nil, p.err
+func (p *errPicker) Pick(balancer.PickInfo) (balancer.PickResult, error) {
+	return balancer.PickResult{}, p.err
 }
diff --git a/vendor/google.golang.org/grpc/balancer/base/base.go b/vendor/google.golang.org/grpc/balancer/base/base.go
index 34b1f29..e31d76e 100644
--- a/vendor/google.golang.org/grpc/balancer/base/base.go
+++ b/vendor/google.golang.org/grpc/balancer/base/base.go
@@ -37,15 +37,22 @@
 
 // PickerBuilder creates balancer.Picker.
 type PickerBuilder interface {
-	// Build takes a slice of ready SubConns, and returns a picker that will be
-	// used by gRPC to pick a SubConn.
-	Build(readySCs map[resolver.Address]balancer.SubConn) balancer.Picker
+	// Build returns a picker that will be used by gRPC to pick a SubConn.
+	Build(info PickerBuildInfo) balancer.Picker
 }
 
-// NewBalancerBuilder returns a balancer builder. The balancers
-// built by this builder will use the picker builder to build pickers.
-func NewBalancerBuilder(name string, pb PickerBuilder) balancer.Builder {
-	return NewBalancerBuilderWithConfig(name, pb, Config{})
+// PickerBuildInfo contains information needed by the picker builder to
+// construct a picker.
+type PickerBuildInfo struct {
+	// ReadySCs is a map from all ready SubConns to the Addresses used to
+	// create them.
+	ReadySCs map[balancer.SubConn]SubConnInfo
+}
+
+// SubConnInfo contains information about a SubConn created by the base
+// balancer.
+type SubConnInfo struct {
+	Address resolver.Address // the address used to create this SubConn
 }
 
 // Config contains the config info about the base balancer builder.
@@ -54,8 +61,8 @@
 	HealthCheck bool
 }
 
-// NewBalancerBuilderWithConfig returns a base balancer builder configured by the provided config.
-func NewBalancerBuilderWithConfig(name string, pb PickerBuilder, config Config) balancer.Builder {
+// NewBalancerBuilder returns a base balancer builder configured by the provided config.
+func NewBalancerBuilder(name string, pb PickerBuilder, config Config) balancer.Builder {
 	return &baseBuilder{
 		name:          name,
 		pickerBuilder: pb,
diff --git a/vendor/google.golang.org/grpc/balancer/conn_state_evaluator.go b/vendor/google.golang.org/grpc/balancer/conn_state_evaluator.go
new file mode 100644
index 0000000..c334135
--- /dev/null
+++ b/vendor/google.golang.org/grpc/balancer/conn_state_evaluator.go
@@ -0,0 +1,74 @@
+/*
+ *
+ * Copyright 2022 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package balancer
+
+import "google.golang.org/grpc/connectivity"
+
+// ConnectivityStateEvaluator takes the connectivity states of multiple SubConns
+// and returns one aggregated connectivity state.
+//
+// It's not thread safe.
+type ConnectivityStateEvaluator struct {
+	numReady            uint64 // Number of addrConns in ready state.
+	numConnecting       uint64 // Number of addrConns in connecting state.
+	numTransientFailure uint64 // Number of addrConns in transient failure state.
+	numIdle             uint64 // Number of addrConns in idle state.
+}
+
+// RecordTransition records state change happening in subConn and based on that
+// it evaluates what aggregated state should be.
+//
+//   - If at least one SubConn in Ready, the aggregated state is Ready;
+//   - Else if at least one SubConn in Connecting, the aggregated state is Connecting;
+//   - Else if at least one SubConn is Idle, the aggregated state is Idle;
+//   - Else if at least one SubConn is TransientFailure (or there are no SubConns), the aggregated state is Transient Failure.
+//
+// Shutdown is not considered.
+func (cse *ConnectivityStateEvaluator) RecordTransition(oldState, newState connectivity.State) connectivity.State {
+	// Update counters.
+	for idx, state := range []connectivity.State{oldState, newState} {
+		updateVal := 2*uint64(idx) - 1 // -1 for oldState and +1 for new.
+		switch state {
+		case connectivity.Ready:
+			cse.numReady += updateVal
+		case connectivity.Connecting:
+			cse.numConnecting += updateVal
+		case connectivity.TransientFailure:
+			cse.numTransientFailure += updateVal
+		case connectivity.Idle:
+			cse.numIdle += updateVal
+		}
+	}
+	return cse.CurrentState()
+}
+
+// CurrentState returns the current aggregate conn state by evaluating the counters
+func (cse *ConnectivityStateEvaluator) CurrentState() connectivity.State {
+	// Evaluate.
+	if cse.numReady > 0 {
+		return connectivity.Ready
+	}
+	if cse.numConnecting > 0 {
+		return connectivity.Connecting
+	}
+	if cse.numIdle > 0 {
+		return connectivity.Idle
+	}
+	return connectivity.TransientFailure
+}
diff --git a/vendor/google.golang.org/grpc/balancer/endpointsharding/endpointsharding.go b/vendor/google.golang.org/grpc/balancer/endpointsharding/endpointsharding.go
new file mode 100644
index 0000000..360db08
--- /dev/null
+++ b/vendor/google.golang.org/grpc/balancer/endpointsharding/endpointsharding.go
@@ -0,0 +1,389 @@
+/*
+ *
+ * Copyright 2024 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package endpointsharding implements a load balancing policy that manages
+// homogeneous child policies each owning a single endpoint.
+//
+// # Experimental
+//
+// Notice: This package is EXPERIMENTAL and may be changed or removed in a
+// later release.
+package endpointsharding
+
+import (
+	"errors"
+	rand "math/rand/v2"
+	"sync"
+	"sync/atomic"
+
+	"google.golang.org/grpc/balancer"
+	"google.golang.org/grpc/balancer/base"
+	"google.golang.org/grpc/connectivity"
+	"google.golang.org/grpc/resolver"
+)
+
+var randIntN = rand.IntN
+
+// ChildState is the balancer state of a child along with the endpoint which
+// identifies the child balancer.
+type ChildState struct {
+	Endpoint resolver.Endpoint
+	State    balancer.State
+
+	// Balancer exposes only the ExitIdler interface of the child LB policy.
+	// Other methods of the child policy are called only by endpointsharding.
+	Balancer ExitIdler
+}
+
+// ExitIdler provides access to only the ExitIdle method of the child balancer.
+type ExitIdler interface {
+	// ExitIdle instructs the LB policy to reconnect to backends / exit the
+	// IDLE state, if appropriate and possible.  Note that SubConns that enter
+	// the IDLE state will not reconnect until SubConn.Connect is called.
+	ExitIdle()
+}
+
+// Options are the options to configure the behaviour of the
+// endpointsharding balancer.
+type Options struct {
+	// DisableAutoReconnect allows the balancer to keep child balancer in the
+	// IDLE state until they are explicitly triggered to exit using the
+	// ChildState obtained from the endpointsharding picker. When set to false,
+	// the endpointsharding balancer will automatically call ExitIdle on child
+	// connections that report IDLE.
+	DisableAutoReconnect bool
+}
+
+// ChildBuilderFunc creates a new balancer with the ClientConn. It has the same
+// type as the balancer.Builder.Build method.
+type ChildBuilderFunc func(cc balancer.ClientConn, opts balancer.BuildOptions) balancer.Balancer
+
+// NewBalancer returns a load balancing policy that manages homogeneous child
+// policies each owning a single endpoint. The endpointsharding balancer
+// forwards the LoadBalancingConfig in ClientConn state updates to its children.
+func NewBalancer(cc balancer.ClientConn, opts balancer.BuildOptions, childBuilder ChildBuilderFunc, esOpts Options) balancer.Balancer {
+	es := &endpointSharding{
+		cc:           cc,
+		bOpts:        opts,
+		esOpts:       esOpts,
+		childBuilder: childBuilder,
+	}
+	es.children.Store(resolver.NewEndpointMap[*balancerWrapper]())
+	return es
+}
+
+// endpointSharding is a balancer that wraps child balancers. It creates a child
+// balancer with child config for every unique Endpoint received. It updates the
+// child states on any update from parent or child.
+type endpointSharding struct {
+	cc           balancer.ClientConn
+	bOpts        balancer.BuildOptions
+	esOpts       Options
+	childBuilder ChildBuilderFunc
+
+	// childMu synchronizes calls to any single child. It must be held for all
+	// calls into a child. To avoid deadlocks, do not acquire childMu while
+	// holding mu.
+	childMu  sync.Mutex
+	children atomic.Pointer[resolver.EndpointMap[*balancerWrapper]]
+
+	// inhibitChildUpdates is set during UpdateClientConnState/ResolverError
+	// calls (calls to children will each produce an update, only want one
+	// update).
+	inhibitChildUpdates atomic.Bool
+
+	// mu synchronizes access to the state stored in balancerWrappers in the
+	// children field. mu must not be held during calls into a child since
+	// synchronous calls back from the child may require taking mu, causing a
+	// deadlock. To avoid deadlocks, do not acquire childMu while holding mu.
+	mu sync.Mutex
+}
+
+// rotateEndpoints returns a slice of all the input endpoints rotated a random
+// amount.
+func rotateEndpoints(es []resolver.Endpoint) []resolver.Endpoint {
+	les := len(es)
+	if les == 0 {
+		return es
+	}
+	r := randIntN(les)
+	// Make a copy to avoid mutating data beyond the end of es.
+	ret := make([]resolver.Endpoint, les)
+	copy(ret, es[r:])
+	copy(ret[les-r:], es[:r])
+	return ret
+}
+
+// UpdateClientConnState creates a child for new endpoints and deletes children
+// for endpoints that are no longer present. It also updates all the children,
+// and sends a single synchronous update of the childrens' aggregated state at
+// the end of the UpdateClientConnState operation. If any endpoint has no
+// addresses it will ignore that endpoint. Otherwise, returns first error found
+// from a child, but fully processes the new update.
+func (es *endpointSharding) UpdateClientConnState(state balancer.ClientConnState) error {
+	es.childMu.Lock()
+	defer es.childMu.Unlock()
+
+	es.inhibitChildUpdates.Store(true)
+	defer func() {
+		es.inhibitChildUpdates.Store(false)
+		es.updateState()
+	}()
+	var ret error
+
+	children := es.children.Load()
+	newChildren := resolver.NewEndpointMap[*balancerWrapper]()
+
+	// Update/Create new children.
+	for _, endpoint := range rotateEndpoints(state.ResolverState.Endpoints) {
+		if _, ok := newChildren.Get(endpoint); ok {
+			// Endpoint child was already created, continue to avoid duplicate
+			// update.
+			continue
+		}
+		childBalancer, ok := children.Get(endpoint)
+		if ok {
+			// Endpoint attributes may have changed, update the stored endpoint.
+			es.mu.Lock()
+			childBalancer.childState.Endpoint = endpoint
+			es.mu.Unlock()
+		} else {
+			childBalancer = &balancerWrapper{
+				childState: ChildState{Endpoint: endpoint},
+				ClientConn: es.cc,
+				es:         es,
+			}
+			childBalancer.childState.Balancer = childBalancer
+			childBalancer.child = es.childBuilder(childBalancer, es.bOpts)
+		}
+		newChildren.Set(endpoint, childBalancer)
+		if err := childBalancer.updateClientConnStateLocked(balancer.ClientConnState{
+			BalancerConfig: state.BalancerConfig,
+			ResolverState: resolver.State{
+				Endpoints:  []resolver.Endpoint{endpoint},
+				Attributes: state.ResolverState.Attributes,
+			},
+		}); err != nil && ret == nil {
+			// Return first error found, and always commit full processing of
+			// updating children. If desired to process more specific errors
+			// across all endpoints, caller should make these specific
+			// validations, this is a current limitation for simplicity sake.
+			ret = err
+		}
+	}
+	// Delete old children that are no longer present.
+	for _, e := range children.Keys() {
+		child, _ := children.Get(e)
+		if _, ok := newChildren.Get(e); !ok {
+			child.closeLocked()
+		}
+	}
+	es.children.Store(newChildren)
+	if newChildren.Len() == 0 {
+		return balancer.ErrBadResolverState
+	}
+	return ret
+}
+
+// ResolverError forwards the resolver error to all of the endpointSharding's
+// children and sends a single synchronous update of the childStates at the end
+// of the ResolverError operation.
+func (es *endpointSharding) ResolverError(err error) {
+	es.childMu.Lock()
+	defer es.childMu.Unlock()
+	es.inhibitChildUpdates.Store(true)
+	defer func() {
+		es.inhibitChildUpdates.Store(false)
+		es.updateState()
+	}()
+	children := es.children.Load()
+	for _, child := range children.Values() {
+		child.resolverErrorLocked(err)
+	}
+}
+
+func (es *endpointSharding) UpdateSubConnState(balancer.SubConn, balancer.SubConnState) {
+	// UpdateSubConnState is deprecated.
+}
+
+func (es *endpointSharding) Close() {
+	es.childMu.Lock()
+	defer es.childMu.Unlock()
+	children := es.children.Load()
+	for _, child := range children.Values() {
+		child.closeLocked()
+	}
+}
+
+func (es *endpointSharding) ExitIdle() {
+	es.childMu.Lock()
+	defer es.childMu.Unlock()
+	for _, bw := range es.children.Load().Values() {
+		if !bw.isClosed {
+			bw.child.ExitIdle()
+		}
+	}
+}
+
+// updateState updates this component's state. It sends the aggregated state,
+// and a picker with round robin behavior with all the child states present if
+// needed.
+func (es *endpointSharding) updateState() {
+	if es.inhibitChildUpdates.Load() {
+		return
+	}
+	var readyPickers, connectingPickers, idlePickers, transientFailurePickers []balancer.Picker
+
+	es.mu.Lock()
+	defer es.mu.Unlock()
+
+	children := es.children.Load()
+	childStates := make([]ChildState, 0, children.Len())
+
+	for _, child := range children.Values() {
+		childState := child.childState
+		childStates = append(childStates, childState)
+		childPicker := childState.State.Picker
+		switch childState.State.ConnectivityState {
+		case connectivity.Ready:
+			readyPickers = append(readyPickers, childPicker)
+		case connectivity.Connecting:
+			connectingPickers = append(connectingPickers, childPicker)
+		case connectivity.Idle:
+			idlePickers = append(idlePickers, childPicker)
+		case connectivity.TransientFailure:
+			transientFailurePickers = append(transientFailurePickers, childPicker)
+			// connectivity.Shutdown shouldn't appear.
+		}
+	}
+
+	// Construct the round robin picker based off the aggregated state. Whatever
+	// the aggregated state, use the pickers present that are currently in that
+	// state only.
+	var aggState connectivity.State
+	var pickers []balancer.Picker
+	if len(readyPickers) >= 1 {
+		aggState = connectivity.Ready
+		pickers = readyPickers
+	} else if len(connectingPickers) >= 1 {
+		aggState = connectivity.Connecting
+		pickers = connectingPickers
+	} else if len(idlePickers) >= 1 {
+		aggState = connectivity.Idle
+		pickers = idlePickers
+	} else if len(transientFailurePickers) >= 1 {
+		aggState = connectivity.TransientFailure
+		pickers = transientFailurePickers
+	} else {
+		aggState = connectivity.TransientFailure
+		pickers = []balancer.Picker{base.NewErrPicker(errors.New("no children to pick from"))}
+	} // No children (resolver error before valid update).
+	p := &pickerWithChildStates{
+		pickers:     pickers,
+		childStates: childStates,
+		next:        uint32(randIntN(len(pickers))),
+	}
+	es.cc.UpdateState(balancer.State{
+		ConnectivityState: aggState,
+		Picker:            p,
+	})
+}
+
+// pickerWithChildStates delegates to the pickers it holds in a round robin
+// fashion. It also contains the childStates of all the endpointSharding's
+// children.
+type pickerWithChildStates struct {
+	pickers     []balancer.Picker
+	childStates []ChildState
+	next        uint32
+}
+
+func (p *pickerWithChildStates) Pick(info balancer.PickInfo) (balancer.PickResult, error) {
+	nextIndex := atomic.AddUint32(&p.next, 1)
+	picker := p.pickers[nextIndex%uint32(len(p.pickers))]
+	return picker.Pick(info)
+}
+
+// ChildStatesFromPicker returns the state of all the children managed by the
+// endpoint sharding balancer that created this picker.
+func ChildStatesFromPicker(picker balancer.Picker) []ChildState {
+	p, ok := picker.(*pickerWithChildStates)
+	if !ok {
+		return nil
+	}
+	return p.childStates
+}
+
+// balancerWrapper is a wrapper of a balancer. It ID's a child balancer by
+// endpoint, and persists recent child balancer state.
+type balancerWrapper struct {
+	// The following fields are initialized at build time and read-only after
+	// that and therefore do not need to be guarded by a mutex.
+
+	// child contains the wrapped balancer. Access its methods only through
+	// methods on balancerWrapper to ensure proper synchronization
+	child               balancer.Balancer
+	balancer.ClientConn // embed to intercept UpdateState, doesn't deal with SubConns
+
+	es *endpointSharding
+
+	// Access to the following fields is guarded by es.mu.
+
+	childState ChildState
+	isClosed   bool
+}
+
+func (bw *balancerWrapper) UpdateState(state balancer.State) {
+	bw.es.mu.Lock()
+	bw.childState.State = state
+	bw.es.mu.Unlock()
+	if state.ConnectivityState == connectivity.Idle && !bw.es.esOpts.DisableAutoReconnect {
+		bw.ExitIdle()
+	}
+	bw.es.updateState()
+}
+
+// ExitIdle pings an IDLE child balancer to exit idle in a new goroutine to
+// avoid deadlocks due to synchronous balancer state updates.
+func (bw *balancerWrapper) ExitIdle() {
+	go func() {
+		bw.es.childMu.Lock()
+		if !bw.isClosed {
+			bw.child.ExitIdle()
+		}
+		bw.es.childMu.Unlock()
+	}()
+}
+
+// updateClientConnStateLocked delivers the ClientConnState to the child
+// balancer. Callers must hold the child mutex of the parent endpointsharding
+// balancer.
+func (bw *balancerWrapper) updateClientConnStateLocked(ccs balancer.ClientConnState) error {
+	return bw.child.UpdateClientConnState(ccs)
+}
+
+// closeLocked closes the child balancer. Callers must hold the child mutext of
+// the parent endpointsharding balancer.
+func (bw *balancerWrapper) closeLocked() {
+	bw.child.Close()
+	bw.isClosed = true
+}
+
+func (bw *balancerWrapper) resolverErrorLocked(err error) {
+	bw.child.ResolverError(err)
+}
diff --git a/vendor/google.golang.org/grpc/balancer/grpclb/state/state.go b/vendor/google.golang.org/grpc/balancer/grpclb/state/state.go
new file mode 100644
index 0000000..4ecfa1c
--- /dev/null
+++ b/vendor/google.golang.org/grpc/balancer/grpclb/state/state.go
@@ -0,0 +1,51 @@
+/*
+ *
+ * Copyright 2020 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package state declares grpclb types to be set by resolvers wishing to pass
+// information to grpclb via resolver.State Attributes.
+package state
+
+import (
+	"google.golang.org/grpc/resolver"
+)
+
+// keyType is the key to use for storing State in Attributes.
+type keyType string
+
+const key = keyType("grpc.grpclb.state")
+
+// State contains gRPCLB-relevant data passed from the name resolver.
+type State struct {
+	// BalancerAddresses contains the remote load balancer address(es).  If
+	// set, overrides any resolver-provided addresses with Type of GRPCLB.
+	BalancerAddresses []resolver.Address
+}
+
+// Set returns a copy of the provided state with attributes containing s.  s's
+// data should not be mutated after calling Set.
+func Set(state resolver.State, s *State) resolver.State {
+	state.Attributes = state.Attributes.WithValue(key, s)
+	return state
+}
+
+// Get returns the grpclb State in the resolver.State, or nil if not present.
+// The returned data should not be mutated.
+func Get(state resolver.State) *State {
+	s, _ := state.Attributes.Value(key).(*State)
+	return s
+}
diff --git a/vendor/google.golang.org/grpc/balancer/pickfirst/internal/internal.go b/vendor/google.golang.org/grpc/balancer/pickfirst/internal/internal.go
new file mode 100644
index 0000000..7d66cb4
--- /dev/null
+++ b/vendor/google.golang.org/grpc/balancer/pickfirst/internal/internal.go
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2024 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package internal contains code internal to the pickfirst package.
+package internal
+
+import (
+	rand "math/rand/v2"
+	"time"
+)
+
+var (
+	// RandShuffle pseudo-randomizes the order of addresses.
+	RandShuffle = rand.Shuffle
+	// TimeAfterFunc allows mocking the timer for testing connection delay
+	// related functionality.
+	TimeAfterFunc = func(d time.Duration, f func()) func() {
+		timer := time.AfterFunc(d, f)
+		return func() { timer.Stop() }
+	}
+)
diff --git a/vendor/google.golang.org/grpc/balancer/pickfirst/pickfirst.go b/vendor/google.golang.org/grpc/balancer/pickfirst/pickfirst.go
new file mode 100644
index 0000000..b15c10e
--- /dev/null
+++ b/vendor/google.golang.org/grpc/balancer/pickfirst/pickfirst.go
@@ -0,0 +1,291 @@
+/*
+ *
+ * Copyright 2017 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package pickfirst contains the pick_first load balancing policy.
+package pickfirst
+
+import (
+	"encoding/json"
+	"errors"
+	"fmt"
+	rand "math/rand/v2"
+
+	"google.golang.org/grpc/balancer"
+	"google.golang.org/grpc/balancer/pickfirst/internal"
+	"google.golang.org/grpc/connectivity"
+	"google.golang.org/grpc/grpclog"
+	"google.golang.org/grpc/internal/envconfig"
+	internalgrpclog "google.golang.org/grpc/internal/grpclog"
+	"google.golang.org/grpc/internal/pretty"
+	"google.golang.org/grpc/resolver"
+	"google.golang.org/grpc/serviceconfig"
+
+	_ "google.golang.org/grpc/balancer/pickfirst/pickfirstleaf" // For automatically registering the new pickfirst if required.
+)
+
+func init() {
+	if envconfig.NewPickFirstEnabled {
+		return
+	}
+	balancer.Register(pickfirstBuilder{})
+}
+
+var logger = grpclog.Component("pick-first-lb")
+
+const (
+	// Name is the name of the pick_first balancer.
+	Name      = "pick_first"
+	logPrefix = "[pick-first-lb %p] "
+)
+
+type pickfirstBuilder struct{}
+
+func (pickfirstBuilder) Build(cc balancer.ClientConn, _ balancer.BuildOptions) balancer.Balancer {
+	b := &pickfirstBalancer{cc: cc}
+	b.logger = internalgrpclog.NewPrefixLogger(logger, fmt.Sprintf(logPrefix, b))
+	return b
+}
+
+func (pickfirstBuilder) Name() string {
+	return Name
+}
+
+type pfConfig struct {
+	serviceconfig.LoadBalancingConfig `json:"-"`
+
+	// If set to true, instructs the LB policy to shuffle the order of the list
+	// of endpoints received from the name resolver before attempting to
+	// connect to them.
+	ShuffleAddressList bool `json:"shuffleAddressList"`
+}
+
+func (pickfirstBuilder) ParseConfig(js json.RawMessage) (serviceconfig.LoadBalancingConfig, error) {
+	var cfg pfConfig
+	if err := json.Unmarshal(js, &cfg); err != nil {
+		return nil, fmt.Errorf("pickfirst: unable to unmarshal LB policy config: %s, error: %v", string(js), err)
+	}
+	return cfg, nil
+}
+
+type pickfirstBalancer struct {
+	logger  *internalgrpclog.PrefixLogger
+	state   connectivity.State
+	cc      balancer.ClientConn
+	subConn balancer.SubConn
+}
+
+func (b *pickfirstBalancer) ResolverError(err error) {
+	if b.logger.V(2) {
+		b.logger.Infof("Received error from the name resolver: %v", err)
+	}
+	if b.subConn == nil {
+		b.state = connectivity.TransientFailure
+	}
+
+	if b.state != connectivity.TransientFailure {
+		// The picker will not change since the balancer does not currently
+		// report an error.
+		return
+	}
+	b.cc.UpdateState(balancer.State{
+		ConnectivityState: connectivity.TransientFailure,
+		Picker:            &picker{err: fmt.Errorf("name resolver error: %v", err)},
+	})
+}
+
+// Shuffler is an interface for shuffling an address list.
+type Shuffler interface {
+	ShuffleAddressListForTesting(n int, swap func(i, j int))
+}
+
+// ShuffleAddressListForTesting pseudo-randomizes the order of addresses.  n
+// is the number of elements.  swap swaps the elements with indexes i and j.
+func ShuffleAddressListForTesting(n int, swap func(i, j int)) { rand.Shuffle(n, swap) }
+
+func (b *pickfirstBalancer) UpdateClientConnState(state balancer.ClientConnState) error {
+	if len(state.ResolverState.Addresses) == 0 && len(state.ResolverState.Endpoints) == 0 {
+		// The resolver reported an empty address list. Treat it like an error by
+		// calling b.ResolverError.
+		if b.subConn != nil {
+			// Shut down the old subConn. All addresses were removed, so it is
+			// no longer valid.
+			b.subConn.Shutdown()
+			b.subConn = nil
+		}
+		b.ResolverError(errors.New("produced zero addresses"))
+		return balancer.ErrBadResolverState
+	}
+	// We don't have to guard this block with the env var because ParseConfig
+	// already does so.
+	cfg, ok := state.BalancerConfig.(pfConfig)
+	if state.BalancerConfig != nil && !ok {
+		return fmt.Errorf("pickfirst: received illegal BalancerConfig (type %T): %v", state.BalancerConfig, state.BalancerConfig)
+	}
+
+	if b.logger.V(2) {
+		b.logger.Infof("Received new config %s, resolver state %s", pretty.ToJSON(cfg), pretty.ToJSON(state.ResolverState))
+	}
+
+	var addrs []resolver.Address
+	if endpoints := state.ResolverState.Endpoints; len(endpoints) != 0 {
+		// Perform the optional shuffling described in gRFC A62. The shuffling will
+		// change the order of endpoints but not touch the order of the addresses
+		// within each endpoint. - A61
+		if cfg.ShuffleAddressList {
+			endpoints = append([]resolver.Endpoint{}, endpoints...)
+			internal.RandShuffle(len(endpoints), func(i, j int) { endpoints[i], endpoints[j] = endpoints[j], endpoints[i] })
+		}
+
+		// "Flatten the list by concatenating the ordered list of addresses for each
+		// of the endpoints, in order." - A61
+		for _, endpoint := range endpoints {
+			// "In the flattened list, interleave addresses from the two address
+			// families, as per RFC-8304 section 4." - A61
+			// TODO: support the above language.
+			addrs = append(addrs, endpoint.Addresses...)
+		}
+	} else {
+		// Endpoints not set, process addresses until we migrate resolver
+		// emissions fully to Endpoints. The top channel does wrap emitted
+		// addresses with endpoints, however some balancers such as weighted
+		// target do not forward the corresponding correct endpoints down/split
+		// endpoints properly. Once all balancers correctly forward endpoints
+		// down, can delete this else conditional.
+		addrs = state.ResolverState.Addresses
+		if cfg.ShuffleAddressList {
+			addrs = append([]resolver.Address{}, addrs...)
+			internal.RandShuffle(len(addrs), func(i, j int) { addrs[i], addrs[j] = addrs[j], addrs[i] })
+		}
+	}
+
+	if b.subConn != nil {
+		b.cc.UpdateAddresses(b.subConn, addrs)
+		return nil
+	}
+
+	var subConn balancer.SubConn
+	subConn, err := b.cc.NewSubConn(addrs, balancer.NewSubConnOptions{
+		StateListener: func(state balancer.SubConnState) {
+			b.updateSubConnState(subConn, state)
+		},
+	})
+	if err != nil {
+		if b.logger.V(2) {
+			b.logger.Infof("Failed to create new SubConn: %v", err)
+		}
+		b.state = connectivity.TransientFailure
+		b.cc.UpdateState(balancer.State{
+			ConnectivityState: connectivity.TransientFailure,
+			Picker:            &picker{err: fmt.Errorf("error creating connection: %v", err)},
+		})
+		return balancer.ErrBadResolverState
+	}
+	b.subConn = subConn
+	b.state = connectivity.Idle
+	b.cc.UpdateState(balancer.State{
+		ConnectivityState: connectivity.Connecting,
+		Picker:            &picker{err: balancer.ErrNoSubConnAvailable},
+	})
+	b.subConn.Connect()
+	return nil
+}
+
+// UpdateSubConnState is unused as a StateListener is always registered when
+// creating SubConns.
+func (b *pickfirstBalancer) UpdateSubConnState(subConn balancer.SubConn, state balancer.SubConnState) {
+	b.logger.Errorf("UpdateSubConnState(%v, %+v) called unexpectedly", subConn, state)
+}
+
+func (b *pickfirstBalancer) updateSubConnState(subConn balancer.SubConn, state balancer.SubConnState) {
+	if b.logger.V(2) {
+		b.logger.Infof("Received SubConn state update: %p, %+v", subConn, state)
+	}
+	if b.subConn != subConn {
+		if b.logger.V(2) {
+			b.logger.Infof("Ignored state change because subConn is not recognized")
+		}
+		return
+	}
+	if state.ConnectivityState == connectivity.Shutdown {
+		b.subConn = nil
+		return
+	}
+
+	switch state.ConnectivityState {
+	case connectivity.Ready:
+		b.cc.UpdateState(balancer.State{
+			ConnectivityState: state.ConnectivityState,
+			Picker:            &picker{result: balancer.PickResult{SubConn: subConn}},
+		})
+	case connectivity.Connecting:
+		if b.state == connectivity.TransientFailure {
+			// We stay in TransientFailure until we are Ready. See A62.
+			return
+		}
+		b.cc.UpdateState(balancer.State{
+			ConnectivityState: state.ConnectivityState,
+			Picker:            &picker{err: balancer.ErrNoSubConnAvailable},
+		})
+	case connectivity.Idle:
+		if b.state == connectivity.TransientFailure {
+			// We stay in TransientFailure until we are Ready. Also kick the
+			// subConn out of Idle into Connecting. See A62.
+			b.subConn.Connect()
+			return
+		}
+		b.cc.UpdateState(balancer.State{
+			ConnectivityState: state.ConnectivityState,
+			Picker:            &idlePicker{subConn: subConn},
+		})
+	case connectivity.TransientFailure:
+		b.cc.UpdateState(balancer.State{
+			ConnectivityState: state.ConnectivityState,
+			Picker:            &picker{err: state.ConnectionError},
+		})
+	}
+	b.state = state.ConnectivityState
+}
+
+func (b *pickfirstBalancer) Close() {
+}
+
+func (b *pickfirstBalancer) ExitIdle() {
+	if b.subConn != nil && b.state == connectivity.Idle {
+		b.subConn.Connect()
+	}
+}
+
+type picker struct {
+	result balancer.PickResult
+	err    error
+}
+
+func (p *picker) Pick(balancer.PickInfo) (balancer.PickResult, error) {
+	return p.result, p.err
+}
+
+// idlePicker is used when the SubConn is IDLE and kicks the SubConn into
+// CONNECTING when Pick is called.
+type idlePicker struct {
+	subConn balancer.SubConn
+}
+
+func (i *idlePicker) Pick(balancer.PickInfo) (balancer.PickResult, error) {
+	i.subConn.Connect()
+	return balancer.PickResult{}, balancer.ErrNoSubConnAvailable
+}
diff --git a/vendor/google.golang.org/grpc/balancer/pickfirst/pickfirstleaf/pickfirstleaf.go b/vendor/google.golang.org/grpc/balancer/pickfirst/pickfirstleaf/pickfirstleaf.go
new file mode 100644
index 0000000..9ffdd28
--- /dev/null
+++ b/vendor/google.golang.org/grpc/balancer/pickfirst/pickfirstleaf/pickfirstleaf.go
@@ -0,0 +1,913 @@
+/*
+ *
+ * Copyright 2024 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+// Package pickfirstleaf contains the pick_first load balancing policy which
+// will be the universal leaf policy after dualstack changes are implemented.
+//
+// # Experimental
+//
+// Notice: This package is EXPERIMENTAL and may be changed or removed in a
+// later release.
+package pickfirstleaf
+
+import (
+	"encoding/json"
+	"errors"
+	"fmt"
+	"net"
+	"net/netip"
+	"sync"
+	"time"
+
+	"google.golang.org/grpc/balancer"
+	"google.golang.org/grpc/balancer/pickfirst/internal"
+	"google.golang.org/grpc/connectivity"
+	expstats "google.golang.org/grpc/experimental/stats"
+	"google.golang.org/grpc/grpclog"
+	"google.golang.org/grpc/internal/envconfig"
+	internalgrpclog "google.golang.org/grpc/internal/grpclog"
+	"google.golang.org/grpc/internal/pretty"
+	"google.golang.org/grpc/resolver"
+	"google.golang.org/grpc/serviceconfig"
+)
+
+func init() {
+	if envconfig.NewPickFirstEnabled {
+		// Register as the default pick_first balancer.
+		Name = "pick_first"
+	}
+	balancer.Register(pickfirstBuilder{})
+}
+
+// enableHealthListenerKeyType is a unique key type used in resolver
+// attributes to indicate whether the health listener usage is enabled.
+type enableHealthListenerKeyType struct{}
+
+var (
+	logger = grpclog.Component("pick-first-leaf-lb")
+	// Name is the name of the pick_first_leaf balancer.
+	// It is changed to "pick_first" in init() if this balancer is to be
+	// registered as the default pickfirst.
+	Name                 = "pick_first_leaf"
+	disconnectionsMetric = expstats.RegisterInt64Count(expstats.MetricDescriptor{
+		Name:        "grpc.lb.pick_first.disconnections",
+		Description: "EXPERIMENTAL. Number of times the selected subchannel becomes disconnected.",
+		Unit:        "{disconnection}",
+		Labels:      []string{"grpc.target"},
+		Default:     false,
+	})
+	connectionAttemptsSucceededMetric = expstats.RegisterInt64Count(expstats.MetricDescriptor{
+		Name:        "grpc.lb.pick_first.connection_attempts_succeeded",
+		Description: "EXPERIMENTAL. Number of successful connection attempts.",
+		Unit:        "{attempt}",
+		Labels:      []string{"grpc.target"},
+		Default:     false,
+	})
+	connectionAttemptsFailedMetric = expstats.RegisterInt64Count(expstats.MetricDescriptor{
+		Name:        "grpc.lb.pick_first.connection_attempts_failed",
+		Description: "EXPERIMENTAL. Number of failed connection attempts.",
+		Unit:        "{attempt}",
+		Labels:      []string{"grpc.target"},
+		Default:     false,
+	})
+)
+
+const (
+	// TODO: change to pick-first when this becomes the default pick_first policy.
+	logPrefix = "[pick-first-leaf-lb %p] "
+	// connectionDelayInterval is the time to wait for during the happy eyeballs
+	// pass before starting the next connection attempt.
+	connectionDelayInterval = 250 * time.Millisecond
+)
+
+type ipAddrFamily int
+
+const (
+	// ipAddrFamilyUnknown represents strings that can't be parsed as an IP
+	// address.
+	ipAddrFamilyUnknown ipAddrFamily = iota
+	ipAddrFamilyV4
+	ipAddrFamilyV6
+)
+
+type pickfirstBuilder struct{}
+
+func (pickfirstBuilder) Build(cc balancer.ClientConn, bo balancer.BuildOptions) balancer.Balancer {
+	b := &pickfirstBalancer{
+		cc:              cc,
+		target:          bo.Target.String(),
+		metricsRecorder: cc.MetricsRecorder(),
+
+		subConns:              resolver.NewAddressMapV2[*scData](),
+		state:                 connectivity.Connecting,
+		cancelConnectionTimer: func() {},
+	}
+	b.logger = internalgrpclog.NewPrefixLogger(logger, fmt.Sprintf(logPrefix, b))
+	return b
+}
+
+func (b pickfirstBuilder) Name() string {
+	return Name
+}
+
+func (pickfirstBuilder) ParseConfig(js json.RawMessage) (serviceconfig.LoadBalancingConfig, error) {
+	var cfg pfConfig
+	if err := json.Unmarshal(js, &cfg); err != nil {
+		return nil, fmt.Errorf("pickfirst: unable to unmarshal LB policy config: %s, error: %v", string(js), err)
+	}
+	return cfg, nil
+}
+
+// EnableHealthListener updates the state to configure pickfirst for using a
+// generic health listener.
+func EnableHealthListener(state resolver.State) resolver.State {
+	state.Attributes = state.Attributes.WithValue(enableHealthListenerKeyType{}, true)
+	return state
+}
+
+type pfConfig struct {
+	serviceconfig.LoadBalancingConfig `json:"-"`
+
+	// If set to true, instructs the LB policy to shuffle the order of the list
+	// of endpoints received from the name resolver before attempting to
+	// connect to them.
+	ShuffleAddressList bool `json:"shuffleAddressList"`
+}
+
+// scData keeps track of the current state of the subConn.
+// It is not safe for concurrent access.
+type scData struct {
+	// The following fields are initialized at build time and read-only after
+	// that.
+	subConn balancer.SubConn
+	addr    resolver.Address
+
+	rawConnectivityState connectivity.State
+	// The effective connectivity state based on raw connectivity, health state
+	// and after following sticky TransientFailure behaviour defined in A62.
+	effectiveState              connectivity.State
+	lastErr                     error
+	connectionFailedInFirstPass bool
+}
+
+func (b *pickfirstBalancer) newSCData(addr resolver.Address) (*scData, error) {
+	sd := &scData{
+		rawConnectivityState: connectivity.Idle,
+		effectiveState:       connectivity.Idle,
+		addr:                 addr,
+	}
+	sc, err := b.cc.NewSubConn([]resolver.Address{addr}, balancer.NewSubConnOptions{
+		StateListener: func(state balancer.SubConnState) {
+			b.updateSubConnState(sd, state)
+		},
+	})
+	if err != nil {
+		return nil, err
+	}
+	sd.subConn = sc
+	return sd, nil
+}
+
+type pickfirstBalancer struct {
+	// The following fields are initialized at build time and read-only after
+	// that and therefore do not need to be guarded by a mutex.
+	logger          *internalgrpclog.PrefixLogger
+	cc              balancer.ClientConn
+	target          string
+	metricsRecorder expstats.MetricsRecorder // guaranteed to be non nil
+
+	// The mutex is used to ensure synchronization of updates triggered
+	// from the idle picker and the already serialized resolver,
+	// SubConn state updates.
+	mu sync.Mutex
+	// State reported to the channel based on SubConn states and resolver
+	// updates.
+	state connectivity.State
+	// scData for active subonns mapped by address.
+	subConns              *resolver.AddressMapV2[*scData]
+	addressList           addressList
+	firstPass             bool
+	numTF                 int
+	cancelConnectionTimer func()
+	healthCheckingEnabled bool
+}
+
+// ResolverError is called by the ClientConn when the name resolver produces
+// an error or when pickfirst determined the resolver update to be invalid.
+func (b *pickfirstBalancer) ResolverError(err error) {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	b.resolverErrorLocked(err)
+}
+
+func (b *pickfirstBalancer) resolverErrorLocked(err error) {
+	if b.logger.V(2) {
+		b.logger.Infof("Received error from the name resolver: %v", err)
+	}
+
+	// The picker will not change since the balancer does not currently
+	// report an error. If the balancer hasn't received a single good resolver
+	// update yet, transition to TRANSIENT_FAILURE.
+	if b.state != connectivity.TransientFailure && b.addressList.size() > 0 {
+		if b.logger.V(2) {
+			b.logger.Infof("Ignoring resolver error because balancer is using a previous good update.")
+		}
+		return
+	}
+
+	b.updateBalancerState(balancer.State{
+		ConnectivityState: connectivity.TransientFailure,
+		Picker:            &picker{err: fmt.Errorf("name resolver error: %v", err)},
+	})
+}
+
+func (b *pickfirstBalancer) UpdateClientConnState(state balancer.ClientConnState) error {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	b.cancelConnectionTimer()
+	if len(state.ResolverState.Addresses) == 0 && len(state.ResolverState.Endpoints) == 0 {
+		// Cleanup state pertaining to the previous resolver state.
+		// Treat an empty address list like an error by calling b.ResolverError.
+		b.closeSubConnsLocked()
+		b.addressList.updateAddrs(nil)
+		b.resolverErrorLocked(errors.New("produced zero addresses"))
+		return balancer.ErrBadResolverState
+	}
+	b.healthCheckingEnabled = state.ResolverState.Attributes.Value(enableHealthListenerKeyType{}) != nil
+	cfg, ok := state.BalancerConfig.(pfConfig)
+	if state.BalancerConfig != nil && !ok {
+		return fmt.Errorf("pickfirst: received illegal BalancerConfig (type %T): %v: %w", state.BalancerConfig, state.BalancerConfig, balancer.ErrBadResolverState)
+	}
+
+	if b.logger.V(2) {
+		b.logger.Infof("Received new config %s, resolver state %s", pretty.ToJSON(cfg), pretty.ToJSON(state.ResolverState))
+	}
+
+	var newAddrs []resolver.Address
+	if endpoints := state.ResolverState.Endpoints; len(endpoints) != 0 {
+		// Perform the optional shuffling described in gRFC A62. The shuffling
+		// will change the order of endpoints but not touch the order of the
+		// addresses within each endpoint. - A61
+		if cfg.ShuffleAddressList {
+			endpoints = append([]resolver.Endpoint{}, endpoints...)
+			internal.RandShuffle(len(endpoints), func(i, j int) { endpoints[i], endpoints[j] = endpoints[j], endpoints[i] })
+		}
+
+		// "Flatten the list by concatenating the ordered list of addresses for
+		// each of the endpoints, in order." - A61
+		for _, endpoint := range endpoints {
+			newAddrs = append(newAddrs, endpoint.Addresses...)
+		}
+	} else {
+		// Endpoints not set, process addresses until we migrate resolver
+		// emissions fully to Endpoints. The top channel does wrap emitted
+		// addresses with endpoints, however some balancers such as weighted
+		// target do not forward the corresponding correct endpoints down/split
+		// endpoints properly. Once all balancers correctly forward endpoints
+		// down, can delete this else conditional.
+		newAddrs = state.ResolverState.Addresses
+		if cfg.ShuffleAddressList {
+			newAddrs = append([]resolver.Address{}, newAddrs...)
+			internal.RandShuffle(len(newAddrs), func(i, j int) { newAddrs[i], newAddrs[j] = newAddrs[j], newAddrs[i] })
+		}
+	}
+
+	// If an address appears in multiple endpoints or in the same endpoint
+	// multiple times, we keep it only once. We will create only one SubConn
+	// for the address because an AddressMap is used to store SubConns.
+	// Not de-duplicating would result in attempting to connect to the same
+	// SubConn multiple times in the same pass. We don't want this.
+	newAddrs = deDupAddresses(newAddrs)
+	newAddrs = interleaveAddresses(newAddrs)
+
+	prevAddr := b.addressList.currentAddress()
+	prevSCData, found := b.subConns.Get(prevAddr)
+	prevAddrsCount := b.addressList.size()
+	isPrevRawConnectivityStateReady := found && prevSCData.rawConnectivityState == connectivity.Ready
+	b.addressList.updateAddrs(newAddrs)
+
+	// If the previous ready SubConn exists in new address list,
+	// keep this connection and don't create new SubConns.
+	if isPrevRawConnectivityStateReady && b.addressList.seekTo(prevAddr) {
+		return nil
+	}
+
+	b.reconcileSubConnsLocked(newAddrs)
+	// If it's the first resolver update or the balancer was already READY
+	// (but the new address list does not contain the ready SubConn) or
+	// CONNECTING, enter CONNECTING.
+	// We may be in TRANSIENT_FAILURE due to a previous empty address list,
+	// we should still enter CONNECTING because the sticky TF behaviour
+	//  mentioned in A62 applies only when the TRANSIENT_FAILURE is reported
+	// due to connectivity failures.
+	if isPrevRawConnectivityStateReady || b.state == connectivity.Connecting || prevAddrsCount == 0 {
+		// Start connection attempt at first address.
+		b.forceUpdateConcludedStateLocked(balancer.State{
+			ConnectivityState: connectivity.Connecting,
+			Picker:            &picker{err: balancer.ErrNoSubConnAvailable},
+		})
+		b.startFirstPassLocked()
+	} else if b.state == connectivity.TransientFailure {
+		// If we're in TRANSIENT_FAILURE, we stay in TRANSIENT_FAILURE until
+		// we're READY. See A62.
+		b.startFirstPassLocked()
+	}
+	return nil
+}
+
+// UpdateSubConnState is unused as a StateListener is always registered when
+// creating SubConns.
+func (b *pickfirstBalancer) UpdateSubConnState(subConn balancer.SubConn, state balancer.SubConnState) {
+	b.logger.Errorf("UpdateSubConnState(%v, %+v) called unexpectedly", subConn, state)
+}
+
+func (b *pickfirstBalancer) Close() {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	b.closeSubConnsLocked()
+	b.cancelConnectionTimer()
+	b.state = connectivity.Shutdown
+}
+
+// ExitIdle moves the balancer out of idle state. It can be called concurrently
+// by the idlePicker and clientConn so access to variables should be
+// synchronized.
+func (b *pickfirstBalancer) ExitIdle() {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	if b.state == connectivity.Idle {
+		// Move the balancer into CONNECTING state immediately. This is done to
+		// avoid staying in IDLE if a resolver update arrives before the first
+		// SubConn reports CONNECTING.
+		b.updateBalancerState(balancer.State{
+			ConnectivityState: connectivity.Connecting,
+			Picker:            &picker{err: balancer.ErrNoSubConnAvailable},
+		})
+		b.startFirstPassLocked()
+	}
+}
+
+func (b *pickfirstBalancer) startFirstPassLocked() {
+	b.firstPass = true
+	b.numTF = 0
+	// Reset the connection attempt record for existing SubConns.
+	for _, sd := range b.subConns.Values() {
+		sd.connectionFailedInFirstPass = false
+	}
+	b.requestConnectionLocked()
+}
+
+func (b *pickfirstBalancer) closeSubConnsLocked() {
+	for _, sd := range b.subConns.Values() {
+		sd.subConn.Shutdown()
+	}
+	b.subConns = resolver.NewAddressMapV2[*scData]()
+}
+
+// deDupAddresses ensures that each address appears only once in the slice.
+func deDupAddresses(addrs []resolver.Address) []resolver.Address {
+	seenAddrs := resolver.NewAddressMapV2[*scData]()
+	retAddrs := []resolver.Address{}
+
+	for _, addr := range addrs {
+		if _, ok := seenAddrs.Get(addr); ok {
+			continue
+		}
+		retAddrs = append(retAddrs, addr)
+	}
+	return retAddrs
+}
+
+// interleaveAddresses interleaves addresses of both families (IPv4 and IPv6)
+// as per RFC-8305 section 4.
+// Whichever address family is first in the list is followed by an address of
+// the other address family; that is, if the first address in the list is IPv6,
+// then the first IPv4 address should be moved up in the list to be second in
+// the list. It doesn't support configuring "First Address Family Count", i.e.
+// there will always be a single member of the first address family at the
+// beginning of the interleaved list.
+// Addresses that are neither IPv4 nor IPv6 are treated as part of a third
+// "unknown" family for interleaving.
+// See: https://datatracker.ietf.org/doc/html/rfc8305#autoid-6
+func interleaveAddresses(addrs []resolver.Address) []resolver.Address {
+	familyAddrsMap := map[ipAddrFamily][]resolver.Address{}
+	interleavingOrder := []ipAddrFamily{}
+	for _, addr := range addrs {
+		family := addressFamily(addr.Addr)
+		if _, found := familyAddrsMap[family]; !found {
+			interleavingOrder = append(interleavingOrder, family)
+		}
+		familyAddrsMap[family] = append(familyAddrsMap[family], addr)
+	}
+
+	interleavedAddrs := make([]resolver.Address, 0, len(addrs))
+
+	for curFamilyIdx := 0; len(interleavedAddrs) < len(addrs); curFamilyIdx = (curFamilyIdx + 1) % len(interleavingOrder) {
+		// Some IP types may have fewer addresses than others, so we look for
+		// the next type that has a remaining member to add to the interleaved
+		// list.
+		family := interleavingOrder[curFamilyIdx]
+		remainingMembers := familyAddrsMap[family]
+		if len(remainingMembers) > 0 {
+			interleavedAddrs = append(interleavedAddrs, remainingMembers[0])
+			familyAddrsMap[family] = remainingMembers[1:]
+		}
+	}
+
+	return interleavedAddrs
+}
+
+// addressFamily returns the ipAddrFamily after parsing the address string.
+// If the address isn't of the format "ip-address:port", it returns
+// ipAddrFamilyUnknown. The address may be valid even if it's not an IP when
+// using a resolver like passthrough where the address may be a hostname in
+// some format that the dialer can resolve.
+func addressFamily(address string) ipAddrFamily {
+	// Parse the IP after removing the port.
+	host, _, err := net.SplitHostPort(address)
+	if err != nil {
+		return ipAddrFamilyUnknown
+	}
+	ip, err := netip.ParseAddr(host)
+	if err != nil {
+		return ipAddrFamilyUnknown
+	}
+	switch {
+	case ip.Is4() || ip.Is4In6():
+		return ipAddrFamilyV4
+	case ip.Is6():
+		return ipAddrFamilyV6
+	default:
+		return ipAddrFamilyUnknown
+	}
+}
+
+// reconcileSubConnsLocked updates the active subchannels based on a new address
+// list from the resolver. It does this by:
+//   - closing subchannels: any existing subchannels associated with addresses
+//     that are no longer in the updated list are shut down.
+//   - removing subchannels: entries for these closed subchannels are removed
+//     from the subchannel map.
+//
+// This ensures that the subchannel map accurately reflects the current set of
+// addresses received from the name resolver.
+func (b *pickfirstBalancer) reconcileSubConnsLocked(newAddrs []resolver.Address) {
+	newAddrsMap := resolver.NewAddressMapV2[bool]()
+	for _, addr := range newAddrs {
+		newAddrsMap.Set(addr, true)
+	}
+
+	for _, oldAddr := range b.subConns.Keys() {
+		if _, ok := newAddrsMap.Get(oldAddr); ok {
+			continue
+		}
+		val, _ := b.subConns.Get(oldAddr)
+		val.subConn.Shutdown()
+		b.subConns.Delete(oldAddr)
+	}
+}
+
+// shutdownRemainingLocked shuts down remaining subConns. Called when a subConn
+// becomes ready, which means that all other subConn must be shutdown.
+func (b *pickfirstBalancer) shutdownRemainingLocked(selected *scData) {
+	b.cancelConnectionTimer()
+	for _, sd := range b.subConns.Values() {
+		if sd.subConn != selected.subConn {
+			sd.subConn.Shutdown()
+		}
+	}
+	b.subConns = resolver.NewAddressMapV2[*scData]()
+	b.subConns.Set(selected.addr, selected)
+}
+
+// requestConnectionLocked starts connecting on the subchannel corresponding to
+// the current address. If no subchannel exists, one is created. If the current
+// subchannel is in TransientFailure, a connection to the next address is
+// attempted until a subchannel is found.
+func (b *pickfirstBalancer) requestConnectionLocked() {
+	if !b.addressList.isValid() {
+		return
+	}
+	var lastErr error
+	for valid := true; valid; valid = b.addressList.increment() {
+		curAddr := b.addressList.currentAddress()
+		sd, ok := b.subConns.Get(curAddr)
+		if !ok {
+			var err error
+			// We want to assign the new scData to sd from the outer scope,
+			// hence we can't use := below.
+			sd, err = b.newSCData(curAddr)
+			if err != nil {
+				// This should never happen, unless the clientConn is being shut
+				// down.
+				if b.logger.V(2) {
+					b.logger.Infof("Failed to create a subConn for address %v: %v", curAddr.String(), err)
+				}
+				// Do nothing, the LB policy will be closed soon.
+				return
+			}
+			b.subConns.Set(curAddr, sd)
+		}
+
+		switch sd.rawConnectivityState {
+		case connectivity.Idle:
+			sd.subConn.Connect()
+			b.scheduleNextConnectionLocked()
+			return
+		case connectivity.TransientFailure:
+			// The SubConn is being re-used and failed during a previous pass
+			// over the addressList. It has not completed backoff yet.
+			// Mark it as having failed and try the next address.
+			sd.connectionFailedInFirstPass = true
+			lastErr = sd.lastErr
+			continue
+		case connectivity.Connecting:
+			// Wait for the connection attempt to complete or the timer to fire
+			// before attempting the next address.
+			b.scheduleNextConnectionLocked()
+			return
+		default:
+			b.logger.Errorf("SubConn with unexpected state %v present in SubConns map.", sd.rawConnectivityState)
+			return
+
+		}
+	}
+
+	// All the remaining addresses in the list are in TRANSIENT_FAILURE, end the
+	// first pass if possible.
+	b.endFirstPassIfPossibleLocked(lastErr)
+}
+
+func (b *pickfirstBalancer) scheduleNextConnectionLocked() {
+	b.cancelConnectionTimer()
+	if !b.addressList.hasNext() {
+		return
+	}
+	curAddr := b.addressList.currentAddress()
+	cancelled := false // Access to this is protected by the balancer's mutex.
+	closeFn := internal.TimeAfterFunc(connectionDelayInterval, func() {
+		b.mu.Lock()
+		defer b.mu.Unlock()
+		// If the scheduled task is cancelled while acquiring the mutex, return.
+		if cancelled {
+			return
+		}
+		if b.logger.V(2) {
+			b.logger.Infof("Happy Eyeballs timer expired while waiting for connection to %q.", curAddr.Addr)
+		}
+		if b.addressList.increment() {
+			b.requestConnectionLocked()
+		}
+	})
+	// Access to the cancellation callback held by the balancer is guarded by
+	// the balancer's mutex, so it's safe to set the boolean from the callback.
+	b.cancelConnectionTimer = sync.OnceFunc(func() {
+		cancelled = true
+		closeFn()
+	})
+}
+
+func (b *pickfirstBalancer) updateSubConnState(sd *scData, newState balancer.SubConnState) {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	oldState := sd.rawConnectivityState
+	sd.rawConnectivityState = newState.ConnectivityState
+	// Previously relevant SubConns can still callback with state updates.
+	// To prevent pickers from returning these obsolete SubConns, this logic
+	// is included to check if the current list of active SubConns includes this
+	// SubConn.
+	if !b.isActiveSCData(sd) {
+		return
+	}
+	if newState.ConnectivityState == connectivity.Shutdown {
+		sd.effectiveState = connectivity.Shutdown
+		return
+	}
+
+	// Record a connection attempt when exiting CONNECTING.
+	if newState.ConnectivityState == connectivity.TransientFailure {
+		sd.connectionFailedInFirstPass = true
+		connectionAttemptsFailedMetric.Record(b.metricsRecorder, 1, b.target)
+	}
+
+	if newState.ConnectivityState == connectivity.Ready {
+		connectionAttemptsSucceededMetric.Record(b.metricsRecorder, 1, b.target)
+		b.shutdownRemainingLocked(sd)
+		if !b.addressList.seekTo(sd.addr) {
+			// This should not fail as we should have only one SubConn after
+			// entering READY. The SubConn should be present in the addressList.
+			b.logger.Errorf("Address %q not found address list in %v", sd.addr, b.addressList.addresses)
+			return
+		}
+		if !b.healthCheckingEnabled {
+			if b.logger.V(2) {
+				b.logger.Infof("SubConn %p reported connectivity state READY and the health listener is disabled. Transitioning SubConn to READY.", sd.subConn)
+			}
+
+			sd.effectiveState = connectivity.Ready
+			b.updateBalancerState(balancer.State{
+				ConnectivityState: connectivity.Ready,
+				Picker:            &picker{result: balancer.PickResult{SubConn: sd.subConn}},
+			})
+			return
+		}
+		if b.logger.V(2) {
+			b.logger.Infof("SubConn %p reported connectivity state READY. Registering health listener.", sd.subConn)
+		}
+		// Send a CONNECTING update to take the SubConn out of sticky-TF if
+		// required.
+		sd.effectiveState = connectivity.Connecting
+		b.updateBalancerState(balancer.State{
+			ConnectivityState: connectivity.Connecting,
+			Picker:            &picker{err: balancer.ErrNoSubConnAvailable},
+		})
+		sd.subConn.RegisterHealthListener(func(scs balancer.SubConnState) {
+			b.updateSubConnHealthState(sd, scs)
+		})
+		return
+	}
+
+	// If the LB policy is READY, and it receives a subchannel state change,
+	// it means that the READY subchannel has failed.
+	// A SubConn can also transition from CONNECTING directly to IDLE when
+	// a transport is successfully created, but the connection fails
+	// before the SubConn can send the notification for READY. We treat
+	// this as a successful connection and transition to IDLE.
+	// TODO: https://github.com/grpc/grpc-go/issues/7862 - Remove the second
+	// part of the if condition below once the issue is fixed.
+	if oldState == connectivity.Ready || (oldState == connectivity.Connecting && newState.ConnectivityState == connectivity.Idle) {
+		// Once a transport fails, the balancer enters IDLE and starts from
+		// the first address when the picker is used.
+		b.shutdownRemainingLocked(sd)
+		sd.effectiveState = newState.ConnectivityState
+		// READY SubConn interspliced in between CONNECTING and IDLE, need to
+		// account for that.
+		if oldState == connectivity.Connecting {
+			// A known issue (https://github.com/grpc/grpc-go/issues/7862)
+			// causes a race that prevents the READY state change notification.
+			// This works around it.
+			connectionAttemptsSucceededMetric.Record(b.metricsRecorder, 1, b.target)
+		}
+		disconnectionsMetric.Record(b.metricsRecorder, 1, b.target)
+		b.addressList.reset()
+		b.updateBalancerState(balancer.State{
+			ConnectivityState: connectivity.Idle,
+			Picker:            &idlePicker{exitIdle: sync.OnceFunc(b.ExitIdle)},
+		})
+		return
+	}
+
+	if b.firstPass {
+		switch newState.ConnectivityState {
+		case connectivity.Connecting:
+			// The effective state can be in either IDLE, CONNECTING or
+			// TRANSIENT_FAILURE. If it's  TRANSIENT_FAILURE, stay in
+			// TRANSIENT_FAILURE until it's READY. See A62.
+			if sd.effectiveState != connectivity.TransientFailure {
+				sd.effectiveState = connectivity.Connecting
+				b.updateBalancerState(balancer.State{
+					ConnectivityState: connectivity.Connecting,
+					Picker:            &picker{err: balancer.ErrNoSubConnAvailable},
+				})
+			}
+		case connectivity.TransientFailure:
+			sd.lastErr = newState.ConnectionError
+			sd.effectiveState = connectivity.TransientFailure
+			// Since we're re-using common SubConns while handling resolver
+			// updates, we could receive an out of turn TRANSIENT_FAILURE from
+			// a pass over the previous address list. Happy Eyeballs will also
+			// cause out of order updates to arrive.
+
+			if curAddr := b.addressList.currentAddress(); equalAddressIgnoringBalAttributes(&curAddr, &sd.addr) {
+				b.cancelConnectionTimer()
+				if b.addressList.increment() {
+					b.requestConnectionLocked()
+					return
+				}
+			}
+
+			// End the first pass if we've seen a TRANSIENT_FAILURE from all
+			// SubConns once.
+			b.endFirstPassIfPossibleLocked(newState.ConnectionError)
+		}
+		return
+	}
+
+	// We have finished the first pass, keep re-connecting failing SubConns.
+	switch newState.ConnectivityState {
+	case connectivity.TransientFailure:
+		b.numTF = (b.numTF + 1) % b.subConns.Len()
+		sd.lastErr = newState.ConnectionError
+		if b.numTF%b.subConns.Len() == 0 {
+			b.updateBalancerState(balancer.State{
+				ConnectivityState: connectivity.TransientFailure,
+				Picker:            &picker{err: newState.ConnectionError},
+			})
+		}
+		// We don't need to request re-resolution since the SubConn already
+		// does that before reporting TRANSIENT_FAILURE.
+		// TODO: #7534 - Move re-resolution requests from SubConn into
+		// pick_first.
+	case connectivity.Idle:
+		sd.subConn.Connect()
+	}
+}
+
+// endFirstPassIfPossibleLocked ends the first happy-eyeballs pass if all the
+// addresses are tried and their SubConns have reported a failure.
+func (b *pickfirstBalancer) endFirstPassIfPossibleLocked(lastErr error) {
+	// An optimization to avoid iterating over the entire SubConn map.
+	if b.addressList.isValid() {
+		return
+	}
+	// Connect() has been called on all the SubConns. The first pass can be
+	// ended if all the SubConns have reported a failure.
+	for _, sd := range b.subConns.Values() {
+		if !sd.connectionFailedInFirstPass {
+			return
+		}
+	}
+	b.firstPass = false
+	b.updateBalancerState(balancer.State{
+		ConnectivityState: connectivity.TransientFailure,
+		Picker:            &picker{err: lastErr},
+	})
+	// Start re-connecting all the SubConns that are already in IDLE.
+	for _, sd := range b.subConns.Values() {
+		if sd.rawConnectivityState == connectivity.Idle {
+			sd.subConn.Connect()
+		}
+	}
+}
+
+func (b *pickfirstBalancer) isActiveSCData(sd *scData) bool {
+	activeSD, found := b.subConns.Get(sd.addr)
+	return found && activeSD == sd
+}
+
+func (b *pickfirstBalancer) updateSubConnHealthState(sd *scData, state balancer.SubConnState) {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	// Previously relevant SubConns can still callback with state updates.
+	// To prevent pickers from returning these obsolete SubConns, this logic
+	// is included to check if the current list of active SubConns includes
+	// this SubConn.
+	if !b.isActiveSCData(sd) {
+		return
+	}
+	sd.effectiveState = state.ConnectivityState
+	switch state.ConnectivityState {
+	case connectivity.Ready:
+		b.updateBalancerState(balancer.State{
+			ConnectivityState: connectivity.Ready,
+			Picker:            &picker{result: balancer.PickResult{SubConn: sd.subConn}},
+		})
+	case connectivity.TransientFailure:
+		b.updateBalancerState(balancer.State{
+			ConnectivityState: connectivity.TransientFailure,
+			Picker:            &picker{err: fmt.Errorf("pickfirst: health check failure: %v", state.ConnectionError)},
+		})
+	case connectivity.Connecting:
+		b.updateBalancerState(balancer.State{
+			ConnectivityState: connectivity.Connecting,
+			Picker:            &picker{err: balancer.ErrNoSubConnAvailable},
+		})
+	default:
+		b.logger.Errorf("Got unexpected health update for SubConn %p: %v", state)
+	}
+}
+
+// updateBalancerState stores the state reported to the channel and calls
+// ClientConn.UpdateState(). As an optimization, it avoids sending duplicate
+// updates to the channel.
+func (b *pickfirstBalancer) updateBalancerState(newState balancer.State) {
+	// In case of TransientFailures allow the picker to be updated to update
+	// the connectivity error, in all other cases don't send duplicate state
+	// updates.
+	if newState.ConnectivityState == b.state && b.state != connectivity.TransientFailure {
+		return
+	}
+	b.forceUpdateConcludedStateLocked(newState)
+}
+
+// forceUpdateConcludedStateLocked stores the state reported to the channel and
+// calls ClientConn.UpdateState().
+// A separate function is defined to force update the ClientConn state since the
+// channel doesn't correctly assume that LB policies start in CONNECTING and
+// relies on LB policy to send an initial CONNECTING update.
+func (b *pickfirstBalancer) forceUpdateConcludedStateLocked(newState balancer.State) {
+	b.state = newState.ConnectivityState
+	b.cc.UpdateState(newState)
+}
+
+type picker struct {
+	result balancer.PickResult
+	err    error
+}
+
+func (p *picker) Pick(balancer.PickInfo) (balancer.PickResult, error) {
+	return p.result, p.err
+}
+
+// idlePicker is used when the SubConn is IDLE and kicks the SubConn into
+// CONNECTING when Pick is called.
+type idlePicker struct {
+	exitIdle func()
+}
+
+func (i *idlePicker) Pick(balancer.PickInfo) (balancer.PickResult, error) {
+	i.exitIdle()
+	return balancer.PickResult{}, balancer.ErrNoSubConnAvailable
+}
+
+// addressList manages sequentially iterating over addresses present in a list
+// of endpoints. It provides a 1 dimensional view of the addresses present in
+// the endpoints.
+// This type is not safe for concurrent access.
+type addressList struct {
+	addresses []resolver.Address
+	idx       int
+}
+
+func (al *addressList) isValid() bool {
+	return al.idx < len(al.addresses)
+}
+
+func (al *addressList) size() int {
+	return len(al.addresses)
+}
+
+// increment moves to the next index in the address list.
+// This method returns false if it went off the list, true otherwise.
+func (al *addressList) increment() bool {
+	if !al.isValid() {
+		return false
+	}
+	al.idx++
+	return al.idx < len(al.addresses)
+}
+
+// currentAddress returns the current address pointed to in the addressList.
+// If the list is in an invalid state, it returns an empty address instead.
+func (al *addressList) currentAddress() resolver.Address {
+	if !al.isValid() {
+		return resolver.Address{}
+	}
+	return al.addresses[al.idx]
+}
+
+func (al *addressList) reset() {
+	al.idx = 0
+}
+
+func (al *addressList) updateAddrs(addrs []resolver.Address) {
+	al.addresses = addrs
+	al.reset()
+}
+
+// seekTo returns false if the needle was not found and the current index was
+// left unchanged.
+func (al *addressList) seekTo(needle resolver.Address) bool {
+	for ai, addr := range al.addresses {
+		if !equalAddressIgnoringBalAttributes(&addr, &needle) {
+			continue
+		}
+		al.idx = ai
+		return true
+	}
+	return false
+}
+
+// hasNext returns whether incrementing the addressList will result in moving
+// past the end of the list. If the list has already moved past the end, it
+// returns false.
+func (al *addressList) hasNext() bool {
+	if !al.isValid() {
+		return false
+	}
+	return al.idx+1 < len(al.addresses)
+}
+
+// equalAddressIgnoringBalAttributes returns true is a and b are considered
+// equal. This is different from the Equal method on the resolver.Address type
+// which considers all fields to determine equality. Here, we only consider
+// fields that are meaningful to the SubConn.
+func equalAddressIgnoringBalAttributes(a, b *resolver.Address) bool {
+	return a.Addr == b.Addr && a.ServerName == b.ServerName &&
+		a.Attributes.Equal(b.Attributes)
+}
diff --git a/vendor/google.golang.org/grpc/balancer/roundrobin/roundrobin.go b/vendor/google.golang.org/grpc/balancer/roundrobin/roundrobin.go
index 29f7a4d..22045bf 100644
--- a/vendor/google.golang.org/grpc/balancer/roundrobin/roundrobin.go
+++ b/vendor/google.golang.org/grpc/balancer/roundrobin/roundrobin.go
@@ -22,62 +22,51 @@
 package roundrobin
 
 import (
-	"context"
-	"sync"
+	"fmt"
 
 	"google.golang.org/grpc/balancer"
-	"google.golang.org/grpc/balancer/base"
+	"google.golang.org/grpc/balancer/endpointsharding"
+	"google.golang.org/grpc/balancer/pickfirst/pickfirstleaf"
 	"google.golang.org/grpc/grpclog"
-	"google.golang.org/grpc/internal/grpcrand"
-	"google.golang.org/grpc/resolver"
+	internalgrpclog "google.golang.org/grpc/internal/grpclog"
 )
 
 // Name is the name of round_robin balancer.
 const Name = "round_robin"
 
-// newBuilder creates a new roundrobin balancer builder.
-func newBuilder() balancer.Builder {
-	return base.NewBalancerBuilderWithConfig(Name, &rrPickerBuilder{}, base.Config{HealthCheck: true})
-}
+var logger = grpclog.Component("roundrobin")
 
 func init() {
-	balancer.Register(newBuilder())
+	balancer.Register(builder{})
 }
 
-type rrPickerBuilder struct{}
+type builder struct{}
 
-func (*rrPickerBuilder) Build(readySCs map[resolver.Address]balancer.SubConn) balancer.Picker {
-	grpclog.Infof("roundrobinPicker: newPicker called with readySCs: %v", readySCs)
-	if len(readySCs) == 0 {
-		return base.NewErrPicker(balancer.ErrNoSubConnAvailable)
-	}
-	var scs []balancer.SubConn
-	for _, sc := range readySCs {
-		scs = append(scs, sc)
-	}
-	return &rrPicker{
-		subConns: scs,
-		// Start at a random index, as the same RR balancer rebuilds a new
-		// picker when SubConn states change, and we don't want to apply excess
-		// load to the first server in the list.
-		next: grpcrand.Intn(len(scs)),
-	}
+func (bb builder) Name() string {
+	return Name
 }
 
-type rrPicker struct {
-	// subConns is the snapshot of the roundrobin balancer when this picker was
-	// created. The slice is immutable. Each Get() will do a round robin
-	// selection from it and return the selected SubConn.
-	subConns []balancer.SubConn
-
-	mu   sync.Mutex
-	next int
+func (bb builder) Build(cc balancer.ClientConn, opts balancer.BuildOptions) balancer.Balancer {
+	childBuilder := balancer.Get(pickfirstleaf.Name).Build
+	bal := &rrBalancer{
+		cc:       cc,
+		Balancer: endpointsharding.NewBalancer(cc, opts, childBuilder, endpointsharding.Options{}),
+	}
+	bal.logger = internalgrpclog.NewPrefixLogger(logger, fmt.Sprintf("[%p] ", bal))
+	bal.logger.Infof("Created")
+	return bal
 }
 
-func (p *rrPicker) Pick(ctx context.Context, opts balancer.PickOptions) (balancer.SubConn, func(balancer.DoneInfo), error) {
-	p.mu.Lock()
-	sc := p.subConns[p.next]
-	p.next = (p.next + 1) % len(p.subConns)
-	p.mu.Unlock()
-	return sc, nil, nil
+type rrBalancer struct {
+	balancer.Balancer
+	cc     balancer.ClientConn
+	logger *internalgrpclog.PrefixLogger
+}
+
+func (b *rrBalancer) UpdateClientConnState(ccs balancer.ClientConnState) error {
+	return b.Balancer.UpdateClientConnState(balancer.ClientConnState{
+		// Enable the health listener in pickfirst children for client side health
+		// checks and outlier detection, if configured.
+		ResolverState: pickfirstleaf.EnableHealthListener(ccs.ResolverState),
+	})
 }
diff --git a/vendor/google.golang.org/grpc/balancer/subconn.go b/vendor/google.golang.org/grpc/balancer/subconn.go
new file mode 100644
index 0000000..9ee44d4
--- /dev/null
+++ b/vendor/google.golang.org/grpc/balancer/subconn.go
@@ -0,0 +1,134 @@
+/*
+ *
+ * Copyright 2024 gRPC authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+package balancer
+
+import (
+	"google.golang.org/grpc/connectivity"
+	"google.golang.org/grpc/internal"
+	"google.golang.org/grpc/resolver"
+)
+
+// A SubConn represents a single connection to a gRPC backend service.
+//
+// All SubConns start in IDLE, and will not try to connect. To trigger a
+// connection attempt, Balancers must call Connect.
+//
+// If the connection attempt fails, the SubConn will transition to
+// TRANSIENT_FAILURE for a backoff period, and then return to IDLE.  If the
+// connection attempt succeeds, it will transition to READY.
+//
+// If a READY SubConn becomes disconnected, the SubConn will transition to IDLE.
+//
+// If a connection re-enters IDLE, Balancers must call Connect again to trigger
+// a new connection attempt.
+//
+// Each SubConn contains a list of addresses.  gRPC will try to connect to the
+// addresses in sequence, and stop trying the remainder once the first
+// connection is successful.  However, this behavior is deprecated.  SubConns
+// should only use a single address.
+//
+// NOTICE: This interface is intended to be implemented by gRPC, or intercepted
+// by custom load balancing polices.  Users should not need their own complete
+// implementation of this interface -- they should always delegate to a SubConn
+// returned by ClientConn.NewSubConn() by embedding it in their implementations.
+// An embedded SubConn must never be nil, or runtime panics will occur.
+type SubConn interface {
+	// UpdateAddresses updates the addresses used in this SubConn.
+	// gRPC checks if currently-connected address is still in the new list.
+	// If it's in the list, the connection will be kept.
+	// If it's not in the list, the connection will gracefully close, and
+	// a new connection will be created.
+	//
+	// This will trigger a state transition for the SubConn.
+	//
+	// Deprecated: this method will be removed.  Create new SubConns for new
+	// addresses instead.
+	UpdateAddresses([]resolver.Address)
+	// Connect starts the connecting for this SubConn.
+	Connect()
+	// GetOrBuildProducer returns a reference to the existing Producer for this
+	// ProducerBuilder in this SubConn, or, if one does not currently exist,
+	// creates a new one and returns it.  Returns a close function which may be
+	// called when the Producer is no longer needed.  Otherwise the producer
+	// will automatically be closed upon connection loss or subchannel close.
+	// Should only be called on a SubConn in state Ready.  Otherwise the
+	// producer will be unable to create streams.
+	GetOrBuildProducer(ProducerBuilder) (p Producer, close func())
+	// Shutdown shuts down the SubConn gracefully.  Any started RPCs will be
+	// allowed to complete.  No future calls should be made on the SubConn.
+	// One final state update will be delivered to the StateListener (or
+	// UpdateSubConnState; deprecated) with ConnectivityState of Shutdown to
+	// indicate the shutdown operation.  This may be delivered before
+	// in-progress RPCs are complete and the actual connection is closed.
+	Shutdown()
+	// RegisterHealthListener registers a health listener that receives health
+	// updates for a Ready SubConn. Only one health listener can be registered
+	// at a time. A health listener should be registered each time the SubConn's
+	// connectivity state changes to READY. Registering a health listener when
+	// the connectivity state is not READY may result in undefined behaviour.
+	// This method must not be called synchronously while handling an update
+	// from a previously registered health listener.
+	RegisterHealthListener(func(SubConnState))
+	// EnforceSubConnEmbedding is included to force implementers to embed
+	// another implementation of this interface, allowing gRPC to add methods
+	// without breaking users.
+	internal.EnforceSubConnEmbedding
+}
+
+// A ProducerBuilder is a simple constructor for a Producer.  It is used by the
+// SubConn to create producers when needed.
+type ProducerBuilder interface {
+	// Build creates a Producer.  The first parameter is always a
+	// grpc.ClientConnInterface (a type to allow creating RPCs/streams on the
+	// associated SubConn), but is declared as `any` to avoid a dependency
+	// cycle.  Build also returns a close function that will be called when all
+	// references to the Producer have been given up for a SubConn, or when a
+	// connectivity state change occurs on the SubConn.  The close function
+	// should always block until all asynchronous cleanup work is completed.
+	Build(grpcClientConnInterface any) (p Producer, close func())
+}
+
+// SubConnState describes the state of a SubConn.
+type SubConnState struct {
+	// ConnectivityState is the connectivity state of the SubConn.
+	ConnectivityState connectivity.State
+	// ConnectionError is set if the ConnectivityState is TransientFailure,
+	// describing the reason the SubConn failed.  Otherwise, it is nil.
+	ConnectionError error
+	// connectedAddr contains the connected address when ConnectivityState is
+	// Ready. Otherwise, it is indeterminate.
+	connectedAddress resolver.Address
+}
+
+// connectedAddress returns the connected address for a SubConnState. The
+// address is only valid if the state is READY.
+func connectedAddress(scs SubConnState) resolver.Address {
+	return scs.connectedAddress
+}
+
+// setConnectedAddress sets the connected address for a SubConnState.
+func setConnectedAddress(scs *SubConnState, addr resolver.Address) {
+	scs.connectedAddress = addr
+}
+
+// A Producer is a type shared among potentially many consumers.  It is
+// associated with a SubConn, and an implementation will typically contain
+// other methods to provide additional functionality, e.g. configuration or
+// subscription registration.
+type Producer any