[VOL-5486] Fix deprecated versions
Change-Id: If0b888d6c2f33b2f415c8b03b08dc994bb3df3f4
Signed-off-by: Abhay Kumar <abhay.kumar@radisys.com>
diff --git a/vendor/github.com/spf13/cobra/zsh_completions.go b/vendor/github.com/spf13/cobra/zsh_completions.go
new file mode 100644
index 0000000..1856e4c
--- /dev/null
+++ b/vendor/github.com/spf13/cobra/zsh_completions.go
@@ -0,0 +1,308 @@
+// Copyright 2013-2023 The Cobra Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package cobra
+
+import (
+ "bytes"
+ "fmt"
+ "io"
+ "os"
+)
+
+// GenZshCompletionFile generates zsh completion file including descriptions.
+func (c *Command) GenZshCompletionFile(filename string) error {
+ return c.genZshCompletionFile(filename, true)
+}
+
+// GenZshCompletion generates zsh completion file including descriptions
+// and writes it to the passed writer.
+func (c *Command) GenZshCompletion(w io.Writer) error {
+ return c.genZshCompletion(w, true)
+}
+
+// GenZshCompletionFileNoDesc generates zsh completion file without descriptions.
+func (c *Command) GenZshCompletionFileNoDesc(filename string) error {
+ return c.genZshCompletionFile(filename, false)
+}
+
+// GenZshCompletionNoDesc generates zsh completion file without descriptions
+// and writes it to the passed writer.
+func (c *Command) GenZshCompletionNoDesc(w io.Writer) error {
+ return c.genZshCompletion(w, false)
+}
+
+// MarkZshCompPositionalArgumentFile only worked for zsh and its behavior was
+// not consistent with Bash completion. It has therefore been disabled.
+// Instead, when no other completion is specified, file completion is done by
+// default for every argument. One can disable file completion on a per-argument
+// basis by using ValidArgsFunction and ShellCompDirectiveNoFileComp.
+// To achieve file extension filtering, one can use ValidArgsFunction and
+// ShellCompDirectiveFilterFileExt.
+//
+// Deprecated
+func (c *Command) MarkZshCompPositionalArgumentFile(argPosition int, patterns ...string) error {
+ return nil
+}
+
+// MarkZshCompPositionalArgumentWords only worked for zsh. It has therefore
+// been disabled.
+// To achieve the same behavior across all shells, one can use
+// ValidArgs (for the first argument only) or ValidArgsFunction for
+// any argument (can include the first one also).
+//
+// Deprecated
+func (c *Command) MarkZshCompPositionalArgumentWords(argPosition int, words ...string) error {
+ return nil
+}
+
+func (c *Command) genZshCompletionFile(filename string, includeDesc bool) error {
+ outFile, err := os.Create(filename)
+ if err != nil {
+ return err
+ }
+ defer outFile.Close()
+
+ return c.genZshCompletion(outFile, includeDesc)
+}
+
+func (c *Command) genZshCompletion(w io.Writer, includeDesc bool) error {
+ buf := new(bytes.Buffer)
+ genZshComp(buf, c.Name(), includeDesc)
+ _, err := buf.WriteTo(w)
+ return err
+}
+
+func genZshComp(buf io.StringWriter, name string, includeDesc bool) {
+ compCmd := ShellCompRequestCmd
+ if !includeDesc {
+ compCmd = ShellCompNoDescRequestCmd
+ }
+ WriteStringAndCheck(buf, fmt.Sprintf(`#compdef %[1]s
+compdef _%[1]s %[1]s
+
+# zsh completion for %-36[1]s -*- shell-script -*-
+
+__%[1]s_debug()
+{
+ local file="$BASH_COMP_DEBUG_FILE"
+ if [[ -n ${file} ]]; then
+ echo "$*" >> "${file}"
+ fi
+}
+
+_%[1]s()
+{
+ local shellCompDirectiveError=%[3]d
+ local shellCompDirectiveNoSpace=%[4]d
+ local shellCompDirectiveNoFileComp=%[5]d
+ local shellCompDirectiveFilterFileExt=%[6]d
+ local shellCompDirectiveFilterDirs=%[7]d
+ local shellCompDirectiveKeepOrder=%[8]d
+
+ local lastParam lastChar flagPrefix requestComp out directive comp lastComp noSpace keepOrder
+ local -a completions
+
+ __%[1]s_debug "\n========= starting completion logic =========="
+ __%[1]s_debug "CURRENT: ${CURRENT}, words[*]: ${words[*]}"
+
+ # The user could have moved the cursor backwards on the command-line.
+ # We need to trigger completion from the $CURRENT location, so we need
+ # to truncate the command-line ($words) up to the $CURRENT location.
+ # (We cannot use $CURSOR as its value does not work when a command is an alias.)
+ words=("${=words[1,CURRENT]}")
+ __%[1]s_debug "Truncated words[*]: ${words[*]},"
+
+ lastParam=${words[-1]}
+ lastChar=${lastParam[-1]}
+ __%[1]s_debug "lastParam: ${lastParam}, lastChar: ${lastChar}"
+
+ # For zsh, when completing a flag with an = (e.g., %[1]s -n=<TAB>)
+ # completions must be prefixed with the flag
+ setopt local_options BASH_REMATCH
+ if [[ "${lastParam}" =~ '-.*=' ]]; then
+ # We are dealing with a flag with an =
+ flagPrefix="-P ${BASH_REMATCH}"
+ fi
+
+ # Prepare the command to obtain completions
+ requestComp="${words[1]} %[2]s ${words[2,-1]}"
+ if [ "${lastChar}" = "" ]; then
+ # If the last parameter is complete (there is a space following it)
+ # We add an extra empty parameter so we can indicate this to the go completion code.
+ __%[1]s_debug "Adding extra empty parameter"
+ requestComp="${requestComp} \"\""
+ fi
+
+ __%[1]s_debug "About to call: eval ${requestComp}"
+
+ # Use eval to handle any environment variables and such
+ out=$(eval ${requestComp} 2>/dev/null)
+ __%[1]s_debug "completion output: ${out}"
+
+ # Extract the directive integer following a : from the last line
+ local lastLine
+ while IFS='\n' read -r line; do
+ lastLine=${line}
+ done < <(printf "%%s\n" "${out[@]}")
+ __%[1]s_debug "last line: ${lastLine}"
+
+ if [ "${lastLine[1]}" = : ]; then
+ directive=${lastLine[2,-1]}
+ # Remove the directive including the : and the newline
+ local suffix
+ (( suffix=${#lastLine}+2))
+ out=${out[1,-$suffix]}
+ else
+ # There is no directive specified. Leave $out as is.
+ __%[1]s_debug "No directive found. Setting do default"
+ directive=0
+ fi
+
+ __%[1]s_debug "directive: ${directive}"
+ __%[1]s_debug "completions: ${out}"
+ __%[1]s_debug "flagPrefix: ${flagPrefix}"
+
+ if [ $((directive & shellCompDirectiveError)) -ne 0 ]; then
+ __%[1]s_debug "Completion received error. Ignoring completions."
+ return
+ fi
+
+ local activeHelpMarker="%[9]s"
+ local endIndex=${#activeHelpMarker}
+ local startIndex=$((${#activeHelpMarker}+1))
+ local hasActiveHelp=0
+ while IFS='\n' read -r comp; do
+ # Check if this is an activeHelp statement (i.e., prefixed with $activeHelpMarker)
+ if [ "${comp[1,$endIndex]}" = "$activeHelpMarker" ];then
+ __%[1]s_debug "ActiveHelp found: $comp"
+ comp="${comp[$startIndex,-1]}"
+ if [ -n "$comp" ]; then
+ compadd -x "${comp}"
+ __%[1]s_debug "ActiveHelp will need delimiter"
+ hasActiveHelp=1
+ fi
+
+ continue
+ fi
+
+ if [ -n "$comp" ]; then
+ # If requested, completions are returned with a description.
+ # The description is preceded by a TAB character.
+ # For zsh's _describe, we need to use a : instead of a TAB.
+ # We first need to escape any : as part of the completion itself.
+ comp=${comp//:/\\:}
+
+ local tab="$(printf '\t')"
+ comp=${comp//$tab/:}
+
+ __%[1]s_debug "Adding completion: ${comp}"
+ completions+=${comp}
+ lastComp=$comp
+ fi
+ done < <(printf "%%s\n" "${out[@]}")
+
+ # Add a delimiter after the activeHelp statements, but only if:
+ # - there are completions following the activeHelp statements, or
+ # - file completion will be performed (so there will be choices after the activeHelp)
+ if [ $hasActiveHelp -eq 1 ]; then
+ if [ ${#completions} -ne 0 ] || [ $((directive & shellCompDirectiveNoFileComp)) -eq 0 ]; then
+ __%[1]s_debug "Adding activeHelp delimiter"
+ compadd -x "--"
+ hasActiveHelp=0
+ fi
+ fi
+
+ if [ $((directive & shellCompDirectiveNoSpace)) -ne 0 ]; then
+ __%[1]s_debug "Activating nospace."
+ noSpace="-S ''"
+ fi
+
+ if [ $((directive & shellCompDirectiveKeepOrder)) -ne 0 ]; then
+ __%[1]s_debug "Activating keep order."
+ keepOrder="-V"
+ fi
+
+ if [ $((directive & shellCompDirectiveFilterFileExt)) -ne 0 ]; then
+ # File extension filtering
+ local filteringCmd
+ filteringCmd='_files'
+ for filter in ${completions[@]}; do
+ if [ ${filter[1]} != '*' ]; then
+ # zsh requires a glob pattern to do file filtering
+ filter="\*.$filter"
+ fi
+ filteringCmd+=" -g $filter"
+ done
+ filteringCmd+=" ${flagPrefix}"
+
+ __%[1]s_debug "File filtering command: $filteringCmd"
+ _arguments '*:filename:'"$filteringCmd"
+ elif [ $((directive & shellCompDirectiveFilterDirs)) -ne 0 ]; then
+ # File completion for directories only
+ local subdir
+ subdir="${completions[1]}"
+ if [ -n "$subdir" ]; then
+ __%[1]s_debug "Listing directories in $subdir"
+ pushd "${subdir}" >/dev/null 2>&1
+ else
+ __%[1]s_debug "Listing directories in ."
+ fi
+
+ local result
+ _arguments '*:dirname:_files -/'" ${flagPrefix}"
+ result=$?
+ if [ -n "$subdir" ]; then
+ popd >/dev/null 2>&1
+ fi
+ return $result
+ else
+ __%[1]s_debug "Calling _describe"
+ if eval _describe $keepOrder "completions" completions $flagPrefix $noSpace; then
+ __%[1]s_debug "_describe found some completions"
+
+ # Return the success of having called _describe
+ return 0
+ else
+ __%[1]s_debug "_describe did not find completions."
+ __%[1]s_debug "Checking if we should do file completion."
+ if [ $((directive & shellCompDirectiveNoFileComp)) -ne 0 ]; then
+ __%[1]s_debug "deactivating file completion"
+
+ # We must return an error code here to let zsh know that there were no
+ # completions found by _describe; this is what will trigger other
+ # matching algorithms to attempt to find completions.
+ # For example zsh can match letters in the middle of words.
+ return 1
+ else
+ # Perform file completion
+ __%[1]s_debug "Activating file completion"
+
+ # We must return the result of this command, so it must be the
+ # last command, or else we must store its result to return it.
+ _arguments '*:filename:_files'" ${flagPrefix}"
+ fi
+ fi
+ fi
+}
+
+# don't run the completion function when being source-ed or eval-ed
+if [ "$funcstack[1]" = "_%[1]s" ]; then
+ _%[1]s
+fi
+`, name, compCmd,
+ ShellCompDirectiveError, ShellCompDirectiveNoSpace, ShellCompDirectiveNoFileComp,
+ ShellCompDirectiveFilterFileExt, ShellCompDirectiveFilterDirs, ShellCompDirectiveKeepOrder,
+ activeHelpMarker))
+}