[VOL-5486] Fix deprecated versions

Change-Id: If0b888d6c2f33b2f415c8b03b08dc994bb3df3f4
Signed-off-by: Abhay Kumar <abhay.kumar@radisys.com>
diff --git a/vendor/github.com/prometheus/procfs/stat.go b/vendor/github.com/prometheus/procfs/stat.go
new file mode 100644
index 0000000..e36b41c
--- /dev/null
+++ b/vendor/github.com/prometheus/procfs/stat.go
@@ -0,0 +1,258 @@
+// Copyright 2018 The Prometheus Authors
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package procfs
+
+import (
+	"bufio"
+	"bytes"
+	"fmt"
+	"io"
+	"strconv"
+	"strings"
+
+	"github.com/prometheus/procfs/internal/fs"
+	"github.com/prometheus/procfs/internal/util"
+)
+
+// CPUStat shows how much time the cpu spend in various stages.
+type CPUStat struct {
+	User      float64
+	Nice      float64
+	System    float64
+	Idle      float64
+	Iowait    float64
+	IRQ       float64
+	SoftIRQ   float64
+	Steal     float64
+	Guest     float64
+	GuestNice float64
+}
+
+// SoftIRQStat represent the softirq statistics as exported in the procfs stat file.
+// A nice introduction can be found at https://0xax.gitbooks.io/linux-insides/content/interrupts/interrupts-9.html
+// It is possible to get per-cpu stats by reading `/proc/softirqs`.
+type SoftIRQStat struct {
+	Hi          uint64
+	Timer       uint64
+	NetTx       uint64
+	NetRx       uint64
+	Block       uint64
+	BlockIoPoll uint64
+	Tasklet     uint64
+	Sched       uint64
+	Hrtimer     uint64
+	Rcu         uint64
+}
+
+// Stat represents kernel/system statistics.
+type Stat struct {
+	// Boot time in seconds since the Epoch.
+	BootTime uint64
+	// Summed up cpu statistics.
+	CPUTotal CPUStat
+	// Per-CPU statistics.
+	CPU map[int64]CPUStat
+	// Number of times interrupts were handled, which contains numbered and unnumbered IRQs.
+	IRQTotal uint64
+	// Number of times a numbered IRQ was triggered.
+	IRQ []uint64
+	// Number of times a context switch happened.
+	ContextSwitches uint64
+	// Number of times a process was created.
+	ProcessCreated uint64
+	// Number of processes currently running.
+	ProcessesRunning uint64
+	// Number of processes currently blocked (waiting for IO).
+	ProcessesBlocked uint64
+	// Number of times a softirq was scheduled.
+	SoftIRQTotal uint64
+	// Detailed softirq statistics.
+	SoftIRQ SoftIRQStat
+}
+
+// Parse a cpu statistics line and returns the CPUStat struct plus the cpu id (or -1 for the overall sum).
+func parseCPUStat(line string) (CPUStat, int64, error) {
+	cpuStat := CPUStat{}
+	var cpu string
+
+	count, err := fmt.Sscanf(line, "%s %f %f %f %f %f %f %f %f %f %f",
+		&cpu,
+		&cpuStat.User, &cpuStat.Nice, &cpuStat.System, &cpuStat.Idle,
+		&cpuStat.Iowait, &cpuStat.IRQ, &cpuStat.SoftIRQ, &cpuStat.Steal,
+		&cpuStat.Guest, &cpuStat.GuestNice)
+
+	if err != nil && err != io.EOF {
+		return CPUStat{}, -1, fmt.Errorf("%w: couldn't parse %q (cpu): %w", ErrFileParse, line, err)
+	}
+	if count == 0 {
+		return CPUStat{}, -1, fmt.Errorf("%w: couldn't parse %q (cpu): 0 elements parsed", ErrFileParse, line)
+	}
+
+	cpuStat.User /= userHZ
+	cpuStat.Nice /= userHZ
+	cpuStat.System /= userHZ
+	cpuStat.Idle /= userHZ
+	cpuStat.Iowait /= userHZ
+	cpuStat.IRQ /= userHZ
+	cpuStat.SoftIRQ /= userHZ
+	cpuStat.Steal /= userHZ
+	cpuStat.Guest /= userHZ
+	cpuStat.GuestNice /= userHZ
+
+	if cpu == "cpu" {
+		return cpuStat, -1, nil
+	}
+
+	cpuID, err := strconv.ParseInt(cpu[3:], 10, 64)
+	if err != nil {
+		return CPUStat{}, -1, fmt.Errorf("%w: couldn't parse %q (cpu/cpuid): %w", ErrFileParse, line, err)
+	}
+
+	return cpuStat, cpuID, nil
+}
+
+// Parse a softirq line.
+func parseSoftIRQStat(line string) (SoftIRQStat, uint64, error) {
+	softIRQStat := SoftIRQStat{}
+	var total uint64
+	var prefix string
+
+	_, err := fmt.Sscanf(line, "%s %d %d %d %d %d %d %d %d %d %d %d",
+		&prefix, &total,
+		&softIRQStat.Hi, &softIRQStat.Timer, &softIRQStat.NetTx, &softIRQStat.NetRx,
+		&softIRQStat.Block, &softIRQStat.BlockIoPoll,
+		&softIRQStat.Tasklet, &softIRQStat.Sched,
+		&softIRQStat.Hrtimer, &softIRQStat.Rcu)
+
+	if err != nil {
+		return SoftIRQStat{}, 0, fmt.Errorf("%w: couldn't parse %q (softirq): %w", ErrFileParse, line, err)
+	}
+
+	return softIRQStat, total, nil
+}
+
+// NewStat returns information about current cpu/process statistics.
+// See https://www.kernel.org/doc/Documentation/filesystems/proc.txt
+//
+// Deprecated: Use fs.Stat() instead.
+func NewStat() (Stat, error) {
+	fs, err := NewFS(fs.DefaultProcMountPoint)
+	if err != nil {
+		return Stat{}, err
+	}
+	return fs.Stat()
+}
+
+// NewStat returns information about current cpu/process statistics.
+// See: https://www.kernel.org/doc/Documentation/filesystems/proc.txt
+//
+// Deprecated: Use fs.Stat() instead.
+func (fs FS) NewStat() (Stat, error) {
+	return fs.Stat()
+}
+
+// Stat returns information about current cpu/process statistics.
+// See: https://www.kernel.org/doc/Documentation/filesystems/proc.txt
+func (fs FS) Stat() (Stat, error) {
+	fileName := fs.proc.Path("stat")
+	data, err := util.ReadFileNoStat(fileName)
+	if err != nil {
+		return Stat{}, err
+	}
+	procStat, err := parseStat(bytes.NewReader(data), fileName)
+	if err != nil {
+		return Stat{}, err
+	}
+	return procStat, nil
+}
+
+// parseStat parses the metrics from /proc/[pid]/stat.
+func parseStat(r io.Reader, fileName string) (Stat, error) {
+	var (
+		scanner = bufio.NewScanner(r)
+		stat    = Stat{
+			CPU: make(map[int64]CPUStat),
+		}
+		err error
+	)
+
+	// Increase default scanner buffer to handle very long `intr` lines.
+	buf := make([]byte, 0, 8*1024)
+	scanner.Buffer(buf, 1024*1024)
+
+	for scanner.Scan() {
+		line := scanner.Text()
+		parts := strings.Fields(scanner.Text())
+		// require at least <key> <value>
+		if len(parts) < 2 {
+			continue
+		}
+		switch {
+		case parts[0] == "btime":
+			if stat.BootTime, err = strconv.ParseUint(parts[1], 10, 64); err != nil {
+				return Stat{}, fmt.Errorf("%w: couldn't parse %q (btime): %w", ErrFileParse, parts[1], err)
+			}
+		case parts[0] == "intr":
+			if stat.IRQTotal, err = strconv.ParseUint(parts[1], 10, 64); err != nil {
+				return Stat{}, fmt.Errorf("%w: couldn't parse %q (intr): %w", ErrFileParse, parts[1], err)
+			}
+			numberedIRQs := parts[2:]
+			stat.IRQ = make([]uint64, len(numberedIRQs))
+			for i, count := range numberedIRQs {
+				if stat.IRQ[i], err = strconv.ParseUint(count, 10, 64); err != nil {
+					return Stat{}, fmt.Errorf("%w: couldn't parse %q (intr%d): %w", ErrFileParse, count, i, err)
+				}
+			}
+		case parts[0] == "ctxt":
+			if stat.ContextSwitches, err = strconv.ParseUint(parts[1], 10, 64); err != nil {
+				return Stat{}, fmt.Errorf("%w: couldn't parse %q (ctxt): %w", ErrFileParse, parts[1], err)
+			}
+		case parts[0] == "processes":
+			if stat.ProcessCreated, err = strconv.ParseUint(parts[1], 10, 64); err != nil {
+				return Stat{}, fmt.Errorf("%w: couldn't parse %q (processes): %w", ErrFileParse, parts[1], err)
+			}
+		case parts[0] == "procs_running":
+			if stat.ProcessesRunning, err = strconv.ParseUint(parts[1], 10, 64); err != nil {
+				return Stat{}, fmt.Errorf("%w: couldn't parse %q (procs_running): %w", ErrFileParse, parts[1], err)
+			}
+		case parts[0] == "procs_blocked":
+			if stat.ProcessesBlocked, err = strconv.ParseUint(parts[1], 10, 64); err != nil {
+				return Stat{}, fmt.Errorf("%w: couldn't parse %q (procs_blocked): %w", ErrFileParse, parts[1], err)
+			}
+		case parts[0] == "softirq":
+			softIRQStats, total, err := parseSoftIRQStat(line)
+			if err != nil {
+				return Stat{}, err
+			}
+			stat.SoftIRQTotal = total
+			stat.SoftIRQ = softIRQStats
+		case strings.HasPrefix(parts[0], "cpu"):
+			cpuStat, cpuID, err := parseCPUStat(line)
+			if err != nil {
+				return Stat{}, err
+			}
+			if cpuID == -1 {
+				stat.CPUTotal = cpuStat
+			} else {
+				stat.CPU[cpuID] = cpuStat
+			}
+		}
+	}
+
+	if err := scanner.Err(); err != nil {
+		return Stat{}, fmt.Errorf("%w: couldn't parse %q: %w", ErrFileParse, fileName, err)
+	}
+
+	return stat, nil
+}