diff --git a/python/adapters/common/frameio/frameio.py b/python/adapters/common/frameio/frameio.py
new file mode 100644
index 0000000..0657257
--- /dev/null
+++ b/python/adapters/common/frameio/frameio.py
@@ -0,0 +1,437 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+"""
+A module that can send and receive raw ethernet frames on a set of interfaces
+and it can manage a set of vlan interfaces on top of existing
+interfaces. Due to reliance on raw sockets, this module requires
+root access. Also, raw sockets are hard to deal with in Twisted (not
+directly supported) we need to run the receiver select loop on a dedicated
+thread.
+"""
+
+import os
+import socket
+import struct
+import uuid
+from pcapy import BPFProgram
+from threading import Thread, Condition
+
+import fcntl
+
+import select
+import structlog
+import sys
+
+from scapy.data import ETH_P_ALL
+from twisted.internet import reactor
+from zope.interface import implementer
+
+from python.common.utils.registry import IComponent
+
+if sys.platform.startswith('linux'):
+    from third_party.oftest import afpacket, netutils
+elif sys.platform == 'darwin':
+    from scapy.arch import pcapdnet, BIOCIMMEDIATE, dnet
+
+log = structlog.get_logger()
+
+
+def hexify(buffer):
+    """
+    Return a hexadecimal string encoding of input buffer
+    """
+    return ''.join('%02x' % ord(c) for c in buffer)
+
+
+class _SelectWakerDescriptor(object):
+    """
+    A descriptor that can be mixed into a select loop to wake it up.
+    """
+    def __init__(self):
+        self.pipe_read, self.pipe_write = os.pipe()
+        fcntl.fcntl(self.pipe_write, fcntl.F_SETFL, os.O_NONBLOCK)
+
+    def __del__(self):
+        os.close(self.pipe_read)
+        os.close(self.pipe_write)
+
+    def fileno(self):
+        return self.pipe_read
+
+    def wait(self):
+        os.read(self.pipe_read, 1)
+
+    def notify(self):
+        """Trigger a select loop"""
+        os.write(self.pipe_write, '\x00')
+
+
+class BpfProgramFilter(object):
+    """
+    Convenience packet filter based on the well-tried Berkeley Packet Filter,
+    used by many well known open source tools such as pcap and tcpdump.
+    """
+    def __init__(self, program_string):
+        """
+        Create a filter using the BPF command syntax. To learn more,
+        consult 'man pcap-filter'.
+        :param program_string: The textual definition of the filter. Examples:
+        'vlan 1000'
+        'vlan 1000 and ip src host 10.10.10.10'
+        """
+        self.bpf = BPFProgram(program_string)
+
+    def __call__(self, frame):
+        """
+        Return 1 if frame passes filter.
+        :param frame: Raw frame provided as Python string
+        :return: 1 if frame satisfies filter, 0 otherwise.
+        """
+        return self.bpf.filter(frame)
+
+
+class FrameIOPort(object):
+    """
+    Represents a network interface which we can send/receive raw
+    Ethernet frames.
+    """
+
+    RCV_SIZE_DEFAULT = 4096
+    ETH_P_ALL = 0x03
+    RCV_TIMEOUT = 10000
+    MIN_PKT_SIZE = 60
+
+    def __init__(self, iface_name):
+        self.iface_name = iface_name
+        self.proxies = []
+        self.socket = self.open_socket(self.iface_name)
+        log.debug('socket-opened', fn=self.fileno(), iface=iface_name)
+        self.received = 0
+        self.discarded = 0
+
+    def add_proxy(self, proxy):
+        self.proxies.append(proxy)
+
+    def del_proxy(self, proxy):
+        self.proxies = [p for p in self.proxies if p.name != proxy.name]
+
+    def open_socket(self, iface_name):
+        raise NotImplementedError('to be implemented by derived class')
+
+    def rcv_frame(self):
+        raise NotImplementedError('to be implemented by derived class')
+
+    def __del__(self):
+        if self.socket:
+            self.socket.close()
+            self.socket = None
+        log.debug('socket-closed', iface=self.iface_name)
+
+    def fileno(self):
+        return self.socket.fileno()
+
+    def _dispatch(self, proxy, frame):
+        log.debug('calling-publisher', proxy=proxy.name, frame=hexify(frame))
+        try:
+            proxy.callback(proxy, frame)
+        except Exception as e:
+            log.exception('callback-error',
+                          explanation='Callback failed while processing frame',
+                          e=e)
+
+    def recv(self):
+        """Called on the select thread when a packet arrives"""
+        try:
+            frame = self.rcv_frame()
+        except RuntimeError as e:
+            # we observed this happens sometimes right after the socket was
+            # attached to a newly created veth interface. So we log it, but
+            # allow to continue.
+            log.warn('afpacket-recv-error', code=-1)
+            return
+
+        log.debug('frame-received', iface=self.iface_name, len=len(frame),
+                  hex=hexify(frame))
+        self.received +=1
+        dispatched = False
+        for proxy in self.proxies:
+            if proxy.filter is None or proxy.filter(frame):
+                log.debug('frame-dispatched')
+                dispatched = True
+                reactor.callFromThread(self._dispatch, proxy, frame)
+
+        if not dispatched:
+            self.discarded += 1
+            log.debug('frame-discarded')
+
+    def send(self, frame):
+        log.debug('sending', len=len(frame), iface=self.iface_name)
+        sent_bytes = self.send_frame(frame)
+        if sent_bytes != len(frame):
+            log.error('send-error', iface=self.iface_name,
+                      wanted_to_send=len(frame), actually_sent=sent_bytes)
+        return sent_bytes
+
+    def send_frame(self, frame):
+        try:
+            return self.socket.send(frame)
+        except socket.error, err:
+            if err[0] == os.errno.EINVAL:
+                if len(frame) < self.MIN_PKT_SIZE:
+                    padding = '\x00' * (self.MIN_PKT_SIZE - len(frame))
+                    frame = frame + padding
+                    return self.socket.send(frame)
+            else:
+                raise
+
+    def up(self):
+        if sys.platform.startswith('darwin'):
+            pass
+        else:
+            os.system('ip link set {} up'.format(self.iface_name))
+        return self
+
+    def down(self):
+        if sys.platform.startswith('darwin'):
+            pass
+        else:
+            os.system('ip link set {} down'.format(self.iface_name))
+        return self
+
+    def statistics(self):
+        return self.received, self.discarded
+
+
+class LinuxFrameIOPort(FrameIOPort):
+
+    def open_socket(self, iface_name):
+        s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
+        afpacket.enable_auxdata(s)
+        s.bind((self.iface_name, self.ETH_P_ALL))
+        netutils.set_promisc(s, iface_name)
+        s.settimeout(self.RCV_TIMEOUT)
+        return s
+
+    def rcv_frame(self):
+        return afpacket.recv(self.socket, self.RCV_SIZE_DEFAULT)
+
+
+class DarwinFrameIOPort(FrameIOPort):
+
+    def open_socket(self, iface_name):
+        sin = pcapdnet.open_pcap(iface_name, 1600, 1, 100)
+        try:
+            fcntl.ioctl(sin.fileno(), BIOCIMMEDIATE, struct.pack("I",1))
+        except:
+            pass
+
+        # need a different kind of socket for sending out
+        self.sout = dnet.eth(iface_name)
+
+        return sin
+
+    def send_frame(self, frame):
+        return self.sout.send(frame)
+
+    def rcv_frame(self):
+        pkt = self.socket.next()
+        if pkt is not None:
+            ts, pkt = pkt
+        return pkt
+
+
+if sys.platform == 'darwin':
+    _FrameIOPort = DarwinFrameIOPort
+elif sys.platform.startswith('linux'):
+    _FrameIOPort = LinuxFrameIOPort
+else:
+    raise Exception('Unsupported platform {}'.format(sys.platform))
+    sys.exit(1)
+
+
+class FrameIOPortProxy(object):
+    """Makes FrameIOPort sharable between multiple users"""
+
+    def __init__(self, frame_io_port, callback, filter=None, name=None):
+        self.frame_io_port = frame_io_port
+        self.callback = callback
+        self.filter = filter
+        self.name = uuid.uuid4().hex[:12] if name is None else name
+
+    @property
+    def iface_name(self):
+        return self.frame_io_port.iface_name
+
+    def get_iface_name(self):
+        return self.frame_io_port.iface_name
+
+    def send(self, frame):
+        return self.frame_io_port.send(frame)
+
+    def up(self):
+        self.frame_io_port.up()
+        return self
+
+    def down(self):
+        self.frame_io_port.down()
+        return self
+
+
+@implementer(IComponent)
+class FrameIOManager(Thread):
+    """
+    Packet/Frame IO manager that can be used to send/receive raw frames
+    on a set of network interfaces.
+    """
+    def __init__(self):
+        super(FrameIOManager, self).__init__()
+
+        self.ports = {}  # iface_name -> ActiveFrameReceiver
+        self.queue = {}  # iface_name -> TODO
+
+        self.cvar = Condition()
+        self.waker = _SelectWakerDescriptor()
+        self.stopped = False
+        self.ports_changed = False
+
+    # ~~~~~~~~~~~ exposed methods callable from main thread ~~~~~~~~~~~~~~~~~~~
+
+    def start(self):
+        """
+        Start the IO manager and its select loop thread
+        """
+        log.debug('starting')
+        super(FrameIOManager, self).start()
+        log.info('started')
+        return self
+
+    def stop(self):
+        """
+        Stop the IO manager and its thread with the select loop
+        """
+        log.debug('stopping')
+        self.stopped = True
+        self.waker.notify()
+        self.join()
+        del self.ports
+        log.info('stopped')
+
+    def list_interfaces(self):
+        """
+        Return list of interfaces listened on
+        :return: List of FrameIOPort objects
+        """
+        return self.ports
+
+    def open_port(self, iface_name, callback, filter=None, name=None):
+        """
+        Add a new interface and start receiving on it.
+        :param iface_name: Name of the interface. Must be an existing Unix
+        interface (eth0, en0, etc.)
+        :param callback: Called on each received frame;
+        signature: def callback(port, frame) where port is the FrameIOPort
+        instance at which the frame was received, frame is the actual frame
+        received (as binay string)
+        :param filter: An optional filter (predicate), with signature:
+        def filter(frame). If provided, only frames for which filter evaluates
+        to True will be forwarded to callback.
+        :return: FrmaeIOPortProxy instance.
+        """
+
+        port = self.ports.get(iface_name)
+        if port is None:
+            port = _FrameIOPort(iface_name)
+            self.ports[iface_name] = port
+            self.ports_changed = True
+            self.waker.notify()
+
+        proxy = FrameIOPortProxy(port, callback, filter, name)
+        port.add_proxy(proxy)
+
+        return proxy
+
+    def close_port(self, proxy):
+        """
+        Remove the proxy. If this is the last proxy on an interface, stop and
+        remove the named interface as well
+        :param proxy: FrameIOPortProxy reference
+        :return: None
+        """
+        assert isinstance(proxy, FrameIOPortProxy)
+        iface_name = proxy.get_iface_name()
+        assert iface_name in self.ports, "iface_name {} unknown".format(iface_name)
+        port = self.ports[iface_name]
+        port.del_proxy(proxy)
+
+        if not port.proxies:
+            del self.ports[iface_name]
+            # need to exit select loop to reconstruct select fd lists
+            self.ports_changed = True
+            self.waker.notify()
+
+    def send(self, iface_name, frame):
+        """
+        Send frame on given interface
+        :param iface_name: Name of previously registered interface
+        :param frame: frame as string
+        :return: number of bytes sent
+        """
+        return self.ports[iface_name].send(frame)
+
+    # ~~~~~~~~~~~~~ Thread methods (running on non-main thread ~~~~~~~~~~~~~~~~
+
+    def run(self):
+        """
+        Called on the alien thread, this is the core multi-port receive loop
+        """
+
+        log.debug('select-loop-started')
+
+        # outer loop constructs sockets list for select
+        while not self.stopped:
+            sockets = [self.waker] + self.ports.values()
+            self.ports_changed = False
+            empty = []
+            # inner select loop
+
+            while not self.stopped:
+                try:
+                    _in, _out, _err = select.select(sockets, empty, empty, 1)
+                except Exception as e:
+                    log.exception('frame-io-select-error', e=e)
+                    break
+                with self.cvar:
+                    for port in _in:
+                        if port is self.waker:
+                            self.waker.wait()
+                            continue
+                        else:
+                            port.recv()
+                    self.cvar.notify_all()
+                if self.ports_changed:
+                    break  # break inner loop so we reconstruct sockets list
+
+        log.debug('select-loop-exited')
+
+    def del_interface(self, iface_name):
+        """
+            Delete interface for stopping
+        """
+
+        log.info('Delete interface')
+        del self.ports[iface_name]
+        log.info('Interface(port) is deleted')