diff --git a/vendor/gopkg.in/natefinch/lumberjack.v2/.gitignore b/vendor/gopkg.in/natefinch/lumberjack.v2/.gitignore
new file mode 100644
index 0000000..8365624
--- /dev/null
+++ b/vendor/gopkg.in/natefinch/lumberjack.v2/.gitignore
@@ -0,0 +1,23 @@
+# Compiled Object files, Static and Dynamic libs (Shared Objects)
+*.o
+*.a
+*.so
+
+# Folders
+_obj
+_test
+
+# Architecture specific extensions/prefixes
+*.[568vq]
+[568vq].out
+
+*.cgo1.go
+*.cgo2.c
+_cgo_defun.c
+_cgo_gotypes.go
+_cgo_export.*
+
+_testmain.go
+
+*.exe
+*.test
diff --git a/vendor/gopkg.in/natefinch/lumberjack.v2/.travis.yml b/vendor/gopkg.in/natefinch/lumberjack.v2/.travis.yml
new file mode 100644
index 0000000..21166f5
--- /dev/null
+++ b/vendor/gopkg.in/natefinch/lumberjack.v2/.travis.yml
@@ -0,0 +1,11 @@
+language: go
+
+go:
+  - tip
+  - 1.15.x
+  - 1.14.x
+  - 1.13.x
+  - 1.12.x
+  
+env:
+  - GO111MODULE=on
diff --git a/vendor/gopkg.in/natefinch/lumberjack.v2/LICENSE b/vendor/gopkg.in/natefinch/lumberjack.v2/LICENSE
new file mode 100644
index 0000000..c3d4cc3
--- /dev/null
+++ b/vendor/gopkg.in/natefinch/lumberjack.v2/LICENSE
@@ -0,0 +1,21 @@
+The MIT License (MIT)
+
+Copyright (c) 2014 Nate Finch 
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
\ No newline at end of file
diff --git a/vendor/gopkg.in/natefinch/lumberjack.v2/README.md b/vendor/gopkg.in/natefinch/lumberjack.v2/README.md
new file mode 100644
index 0000000..060eae5
--- /dev/null
+++ b/vendor/gopkg.in/natefinch/lumberjack.v2/README.md
@@ -0,0 +1,179 @@
+# lumberjack  [![GoDoc](https://godoc.org/gopkg.in/natefinch/lumberjack.v2?status.png)](https://godoc.org/gopkg.in/natefinch/lumberjack.v2) [![Build Status](https://travis-ci.org/natefinch/lumberjack.svg?branch=v2.0)](https://travis-ci.org/natefinch/lumberjack) [![Build status](https://ci.appveyor.com/api/projects/status/00gchpxtg4gkrt5d)](https://ci.appveyor.com/project/natefinch/lumberjack) [![Coverage Status](https://coveralls.io/repos/natefinch/lumberjack/badge.svg?branch=v2.0)](https://coveralls.io/r/natefinch/lumberjack?branch=v2.0)
+
+### Lumberjack is a Go package for writing logs to rolling files.
+
+Package lumberjack provides a rolling logger.
+
+Note that this is v2.0 of lumberjack, and should be imported using gopkg.in
+thusly:
+
+    import "gopkg.in/natefinch/lumberjack.v2"
+
+The package name remains simply lumberjack, and the code resides at
+https://github.com/natefinch/lumberjack under the v2.0 branch.
+
+Lumberjack is intended to be one part of a logging infrastructure.
+It is not an all-in-one solution, but instead is a pluggable
+component at the bottom of the logging stack that simply controls the files
+to which logs are written.
+
+Lumberjack plays well with any logging package that can write to an
+io.Writer, including the standard library's log package.
+
+Lumberjack assumes that only one process is writing to the output files.
+Using the same lumberjack configuration from multiple processes on the same
+machine will result in improper behavior.
+
+
+**Example**
+
+To use lumberjack with the standard library's log package, just pass it into the SetOutput function when your application starts.
+
+Code:
+
+```go
+log.SetOutput(&lumberjack.Logger{
+    Filename:   "/var/log/myapp/foo.log",
+    MaxSize:    500, // megabytes
+    MaxBackups: 3,
+    MaxAge:     28, //days
+    Compress:   true, // disabled by default
+})
+```
+
+
+
+## type Logger
+``` go
+type Logger struct {
+    // Filename is the file to write logs to.  Backup log files will be retained
+    // in the same directory.  It uses <processname>-lumberjack.log in
+    // os.TempDir() if empty.
+    Filename string `json:"filename" yaml:"filename"`
+
+    // MaxSize is the maximum size in megabytes of the log file before it gets
+    // rotated. It defaults to 100 megabytes.
+    MaxSize int `json:"maxsize" yaml:"maxsize"`
+
+    // MaxAge is the maximum number of days to retain old log files based on the
+    // timestamp encoded in their filename.  Note that a day is defined as 24
+    // hours and may not exactly correspond to calendar days due to daylight
+    // savings, leap seconds, etc. The default is not to remove old log files
+    // based on age.
+    MaxAge int `json:"maxage" yaml:"maxage"`
+
+    // MaxBackups is the maximum number of old log files to retain.  The default
+    // is to retain all old log files (though MaxAge may still cause them to get
+    // deleted.)
+    MaxBackups int `json:"maxbackups" yaml:"maxbackups"`
+
+    // LocalTime determines if the time used for formatting the timestamps in
+    // backup files is the computer's local time.  The default is to use UTC
+    // time.
+    LocalTime bool `json:"localtime" yaml:"localtime"`
+
+    // Compress determines if the rotated log files should be compressed
+    // using gzip. The default is not to perform compression.
+    Compress bool `json:"compress" yaml:"compress"`
+    // contains filtered or unexported fields
+}
+```
+Logger is an io.WriteCloser that writes to the specified filename.
+
+Logger opens or creates the logfile on first Write.  If the file exists and
+is less than MaxSize megabytes, lumberjack will open and append to that file.
+If the file exists and its size is >= MaxSize megabytes, the file is renamed
+by putting the current time in a timestamp in the name immediately before the
+file's extension (or the end of the filename if there's no extension). A new
+log file is then created using original filename.
+
+Whenever a write would cause the current log file exceed MaxSize megabytes,
+the current file is closed, renamed, and a new log file created with the
+original name. Thus, the filename you give Logger is always the "current" log
+file.
+
+Backups use the log file name given to Logger, in the form `name-timestamp.ext`
+where name is the filename without the extension, timestamp is the time at which
+the log was rotated formatted with the time.Time format of
+`2006-01-02T15-04-05.000` and the extension is the original extension.  For
+example, if your Logger.Filename is `/var/log/foo/server.log`, a backup created
+at 6:30pm on Nov 11 2016 would use the filename
+`/var/log/foo/server-2016-11-04T18-30-00.000.log`
+
+### Cleaning Up Old Log Files
+Whenever a new logfile gets created, old log files may be deleted.  The most
+recent files according to the encoded timestamp will be retained, up to a
+number equal to MaxBackups (or all of them if MaxBackups is 0).  Any files
+with an encoded timestamp older than MaxAge days are deleted, regardless of
+MaxBackups.  Note that the time encoded in the timestamp is the rotation
+time, which may differ from the last time that file was written to.
+
+If MaxBackups and MaxAge are both 0, no old log files will be deleted.
+
+
+
+
+
+
+
+
+
+
+
+### func (\*Logger) Close
+``` go
+func (l *Logger) Close() error
+```
+Close implements io.Closer, and closes the current logfile.
+
+
+
+### func (\*Logger) Rotate
+``` go
+func (l *Logger) Rotate() error
+```
+Rotate causes Logger to close the existing log file and immediately create a
+new one.  This is a helper function for applications that want to initiate
+rotations outside of the normal rotation rules, such as in response to
+SIGHUP.  After rotating, this initiates a cleanup of old log files according
+to the normal rules.
+
+**Example**
+
+Example of how to rotate in response to SIGHUP.
+
+Code:
+
+```go
+l := &lumberjack.Logger{}
+log.SetOutput(l)
+c := make(chan os.Signal, 1)
+signal.Notify(c, syscall.SIGHUP)
+
+go func() {
+    for {
+        <-c
+        l.Rotate()
+    }
+}()
+```
+
+### func (\*Logger) Write
+``` go
+func (l *Logger) Write(p []byte) (n int, err error)
+```
+Write implements io.Writer.  If a write would cause the log file to be larger
+than MaxSize, the file is closed, renamed to include a timestamp of the
+current time, and a new log file is created using the original log file name.
+If the length of the write is greater than MaxSize, an error is returned.
+
+
+
+
+
+
+
+
+
+- - -
+Generated by [godoc2md](http://godoc.org/github.com/davecheney/godoc2md)
diff --git a/vendor/gopkg.in/natefinch/lumberjack.v2/chown.go b/vendor/gopkg.in/natefinch/lumberjack.v2/chown.go
new file mode 100644
index 0000000..11d0669
--- /dev/null
+++ b/vendor/gopkg.in/natefinch/lumberjack.v2/chown.go
@@ -0,0 +1,11 @@
+// +build !linux
+
+package lumberjack
+
+import (
+	"os"
+)
+
+func chown(_ string, _ os.FileInfo) error {
+	return nil
+}
diff --git a/vendor/gopkg.in/natefinch/lumberjack.v2/chown_linux.go b/vendor/gopkg.in/natefinch/lumberjack.v2/chown_linux.go
new file mode 100644
index 0000000..465f569
--- /dev/null
+++ b/vendor/gopkg.in/natefinch/lumberjack.v2/chown_linux.go
@@ -0,0 +1,19 @@
+package lumberjack
+
+import (
+	"os"
+	"syscall"
+)
+
+// osChown is a var so we can mock it out during tests.
+var osChown = os.Chown
+
+func chown(name string, info os.FileInfo) error {
+	f, err := os.OpenFile(name, os.O_CREATE|os.O_WRONLY|os.O_TRUNC, info.Mode())
+	if err != nil {
+		return err
+	}
+	f.Close()
+	stat := info.Sys().(*syscall.Stat_t)
+	return osChown(name, int(stat.Uid), int(stat.Gid))
+}
diff --git a/vendor/gopkg.in/natefinch/lumberjack.v2/lumberjack.go b/vendor/gopkg.in/natefinch/lumberjack.v2/lumberjack.go
new file mode 100644
index 0000000..3447cdc
--- /dev/null
+++ b/vendor/gopkg.in/natefinch/lumberjack.v2/lumberjack.go
@@ -0,0 +1,541 @@
+// Package lumberjack provides a rolling logger.
+//
+// Note that this is v2.0 of lumberjack, and should be imported using gopkg.in
+// thusly:
+//
+//   import "gopkg.in/natefinch/lumberjack.v2"
+//
+// The package name remains simply lumberjack, and the code resides at
+// https://github.com/natefinch/lumberjack under the v2.0 branch.
+//
+// Lumberjack is intended to be one part of a logging infrastructure.
+// It is not an all-in-one solution, but instead is a pluggable
+// component at the bottom of the logging stack that simply controls the files
+// to which logs are written.
+//
+// Lumberjack plays well with any logging package that can write to an
+// io.Writer, including the standard library's log package.
+//
+// Lumberjack assumes that only one process is writing to the output files.
+// Using the same lumberjack configuration from multiple processes on the same
+// machine will result in improper behavior.
+package lumberjack
+
+import (
+	"compress/gzip"
+	"errors"
+	"fmt"
+	"io"
+	"io/ioutil"
+	"os"
+	"path/filepath"
+	"sort"
+	"strings"
+	"sync"
+	"time"
+)
+
+const (
+	backupTimeFormat = "2006-01-02T15-04-05.000"
+	compressSuffix   = ".gz"
+	defaultMaxSize   = 100
+)
+
+// ensure we always implement io.WriteCloser
+var _ io.WriteCloser = (*Logger)(nil)
+
+// Logger is an io.WriteCloser that writes to the specified filename.
+//
+// Logger opens or creates the logfile on first Write.  If the file exists and
+// is less than MaxSize megabytes, lumberjack will open and append to that file.
+// If the file exists and its size is >= MaxSize megabytes, the file is renamed
+// by putting the current time in a timestamp in the name immediately before the
+// file's extension (or the end of the filename if there's no extension). A new
+// log file is then created using original filename.
+//
+// Whenever a write would cause the current log file exceed MaxSize megabytes,
+// the current file is closed, renamed, and a new log file created with the
+// original name. Thus, the filename you give Logger is always the "current" log
+// file.
+//
+// Backups use the log file name given to Logger, in the form
+// `name-timestamp.ext` where name is the filename without the extension,
+// timestamp is the time at which the log was rotated formatted with the
+// time.Time format of `2006-01-02T15-04-05.000` and the extension is the
+// original extension.  For example, if your Logger.Filename is
+// `/var/log/foo/server.log`, a backup created at 6:30pm on Nov 11 2016 would
+// use the filename `/var/log/foo/server-2016-11-04T18-30-00.000.log`
+//
+// Cleaning Up Old Log Files
+//
+// Whenever a new logfile gets created, old log files may be deleted.  The most
+// recent files according to the encoded timestamp will be retained, up to a
+// number equal to MaxBackups (or all of them if MaxBackups is 0).  Any files
+// with an encoded timestamp older than MaxAge days are deleted, regardless of
+// MaxBackups.  Note that the time encoded in the timestamp is the rotation
+// time, which may differ from the last time that file was written to.
+//
+// If MaxBackups and MaxAge are both 0, no old log files will be deleted.
+type Logger struct {
+	// Filename is the file to write logs to.  Backup log files will be retained
+	// in the same directory.  It uses <processname>-lumberjack.log in
+	// os.TempDir() if empty.
+	Filename string `json:"filename" yaml:"filename"`
+
+	// MaxSize is the maximum size in megabytes of the log file before it gets
+	// rotated. It defaults to 100 megabytes.
+	MaxSize int `json:"maxsize" yaml:"maxsize"`
+
+	// MaxAge is the maximum number of days to retain old log files based on the
+	// timestamp encoded in their filename.  Note that a day is defined as 24
+	// hours and may not exactly correspond to calendar days due to daylight
+	// savings, leap seconds, etc. The default is not to remove old log files
+	// based on age.
+	MaxAge int `json:"maxage" yaml:"maxage"`
+
+	// MaxBackups is the maximum number of old log files to retain.  The default
+	// is to retain all old log files (though MaxAge may still cause them to get
+	// deleted.)
+	MaxBackups int `json:"maxbackups" yaml:"maxbackups"`
+
+	// LocalTime determines if the time used for formatting the timestamps in
+	// backup files is the computer's local time.  The default is to use UTC
+	// time.
+	LocalTime bool `json:"localtime" yaml:"localtime"`
+
+	// Compress determines if the rotated log files should be compressed
+	// using gzip. The default is not to perform compression.
+	Compress bool `json:"compress" yaml:"compress"`
+
+	size int64
+	file *os.File
+	mu   sync.Mutex
+
+	millCh    chan bool
+	startMill sync.Once
+}
+
+var (
+	// currentTime exists so it can be mocked out by tests.
+	currentTime = time.Now
+
+	// os_Stat exists so it can be mocked out by tests.
+	osStat = os.Stat
+
+	// megabyte is the conversion factor between MaxSize and bytes.  It is a
+	// variable so tests can mock it out and not need to write megabytes of data
+	// to disk.
+	megabyte = 1024 * 1024
+)
+
+// Write implements io.Writer.  If a write would cause the log file to be larger
+// than MaxSize, the file is closed, renamed to include a timestamp of the
+// current time, and a new log file is created using the original log file name.
+// If the length of the write is greater than MaxSize, an error is returned.
+func (l *Logger) Write(p []byte) (n int, err error) {
+	l.mu.Lock()
+	defer l.mu.Unlock()
+
+	writeLen := int64(len(p))
+	if writeLen > l.max() {
+		return 0, fmt.Errorf(
+			"write length %d exceeds maximum file size %d", writeLen, l.max(),
+		)
+	}
+
+	if l.file == nil {
+		if err = l.openExistingOrNew(len(p)); err != nil {
+			return 0, err
+		}
+	}
+
+	if l.size+writeLen > l.max() {
+		if err := l.rotate(); err != nil {
+			return 0, err
+		}
+	}
+
+	n, err = l.file.Write(p)
+	l.size += int64(n)
+
+	return n, err
+}
+
+// Close implements io.Closer, and closes the current logfile.
+func (l *Logger) Close() error {
+	l.mu.Lock()
+	defer l.mu.Unlock()
+	return l.close()
+}
+
+// close closes the file if it is open.
+func (l *Logger) close() error {
+	if l.file == nil {
+		return nil
+	}
+	err := l.file.Close()
+	l.file = nil
+	return err
+}
+
+// Rotate causes Logger to close the existing log file and immediately create a
+// new one.  This is a helper function for applications that want to initiate
+// rotations outside of the normal rotation rules, such as in response to
+// SIGHUP.  After rotating, this initiates compression and removal of old log
+// files according to the configuration.
+func (l *Logger) Rotate() error {
+	l.mu.Lock()
+	defer l.mu.Unlock()
+	return l.rotate()
+}
+
+// rotate closes the current file, moves it aside with a timestamp in the name,
+// (if it exists), opens a new file with the original filename, and then runs
+// post-rotation processing and removal.
+func (l *Logger) rotate() error {
+	if err := l.close(); err != nil {
+		return err
+	}
+	if err := l.openNew(); err != nil {
+		return err
+	}
+	l.mill()
+	return nil
+}
+
+// openNew opens a new log file for writing, moving any old log file out of the
+// way.  This methods assumes the file has already been closed.
+func (l *Logger) openNew() error {
+	err := os.MkdirAll(l.dir(), 0755)
+	if err != nil {
+		return fmt.Errorf("can't make directories for new logfile: %s", err)
+	}
+
+	name := l.filename()
+	mode := os.FileMode(0600)
+	info, err := osStat(name)
+	if err == nil {
+		// Copy the mode off the old logfile.
+		mode = info.Mode()
+		// move the existing file
+		newname := backupName(name, l.LocalTime)
+		if err := os.Rename(name, newname); err != nil {
+			return fmt.Errorf("can't rename log file: %s", err)
+		}
+
+		// this is a no-op anywhere but linux
+		if err := chown(name, info); err != nil {
+			return err
+		}
+	}
+
+	// we use truncate here because this should only get called when we've moved
+	// the file ourselves. if someone else creates the file in the meantime,
+	// just wipe out the contents.
+	f, err := os.OpenFile(name, os.O_CREATE|os.O_WRONLY|os.O_TRUNC, mode)
+	if err != nil {
+		return fmt.Errorf("can't open new logfile: %s", err)
+	}
+	l.file = f
+	l.size = 0
+	return nil
+}
+
+// backupName creates a new filename from the given name, inserting a timestamp
+// between the filename and the extension, using the local time if requested
+// (otherwise UTC).
+func backupName(name string, local bool) string {
+	dir := filepath.Dir(name)
+	filename := filepath.Base(name)
+	ext := filepath.Ext(filename)
+	prefix := filename[:len(filename)-len(ext)]
+	t := currentTime()
+	if !local {
+		t = t.UTC()
+	}
+
+	timestamp := t.Format(backupTimeFormat)
+	return filepath.Join(dir, fmt.Sprintf("%s-%s%s", prefix, timestamp, ext))
+}
+
+// openExistingOrNew opens the logfile if it exists and if the current write
+// would not put it over MaxSize.  If there is no such file or the write would
+// put it over the MaxSize, a new file is created.
+func (l *Logger) openExistingOrNew(writeLen int) error {
+	l.mill()
+
+	filename := l.filename()
+	info, err := osStat(filename)
+	if os.IsNotExist(err) {
+		return l.openNew()
+	}
+	if err != nil {
+		return fmt.Errorf("error getting log file info: %s", err)
+	}
+
+	if info.Size()+int64(writeLen) >= l.max() {
+		return l.rotate()
+	}
+
+	file, err := os.OpenFile(filename, os.O_APPEND|os.O_WRONLY, 0644)
+	if err != nil {
+		// if we fail to open the old log file for some reason, just ignore
+		// it and open a new log file.
+		return l.openNew()
+	}
+	l.file = file
+	l.size = info.Size()
+	return nil
+}
+
+// filename generates the name of the logfile from the current time.
+func (l *Logger) filename() string {
+	if l.Filename != "" {
+		return l.Filename
+	}
+	name := filepath.Base(os.Args[0]) + "-lumberjack.log"
+	return filepath.Join(os.TempDir(), name)
+}
+
+// millRunOnce performs compression and removal of stale log files.
+// Log files are compressed if enabled via configuration and old log
+// files are removed, keeping at most l.MaxBackups files, as long as
+// none of them are older than MaxAge.
+func (l *Logger) millRunOnce() error {
+	if l.MaxBackups == 0 && l.MaxAge == 0 && !l.Compress {
+		return nil
+	}
+
+	files, err := l.oldLogFiles()
+	if err != nil {
+		return err
+	}
+
+	var compress, remove []logInfo
+
+	if l.MaxBackups > 0 && l.MaxBackups < len(files) {
+		preserved := make(map[string]bool)
+		var remaining []logInfo
+		for _, f := range files {
+			// Only count the uncompressed log file or the
+			// compressed log file, not both.
+			fn := f.Name()
+			if strings.HasSuffix(fn, compressSuffix) {
+				fn = fn[:len(fn)-len(compressSuffix)]
+			}
+			preserved[fn] = true
+
+			if len(preserved) > l.MaxBackups {
+				remove = append(remove, f)
+			} else {
+				remaining = append(remaining, f)
+			}
+		}
+		files = remaining
+	}
+	if l.MaxAge > 0 {
+		diff := time.Duration(int64(24*time.Hour) * int64(l.MaxAge))
+		cutoff := currentTime().Add(-1 * diff)
+
+		var remaining []logInfo
+		for _, f := range files {
+			if f.timestamp.Before(cutoff) {
+				remove = append(remove, f)
+			} else {
+				remaining = append(remaining, f)
+			}
+		}
+		files = remaining
+	}
+
+	if l.Compress {
+		for _, f := range files {
+			if !strings.HasSuffix(f.Name(), compressSuffix) {
+				compress = append(compress, f)
+			}
+		}
+	}
+
+	for _, f := range remove {
+		errRemove := os.Remove(filepath.Join(l.dir(), f.Name()))
+		if err == nil && errRemove != nil {
+			err = errRemove
+		}
+	}
+	for _, f := range compress {
+		fn := filepath.Join(l.dir(), f.Name())
+		errCompress := compressLogFile(fn, fn+compressSuffix)
+		if err == nil && errCompress != nil {
+			err = errCompress
+		}
+	}
+
+	return err
+}
+
+// millRun runs in a goroutine to manage post-rotation compression and removal
+// of old log files.
+func (l *Logger) millRun() {
+	for range l.millCh {
+		// what am I going to do, log this?
+		_ = l.millRunOnce()
+	}
+}
+
+// mill performs post-rotation compression and removal of stale log files,
+// starting the mill goroutine if necessary.
+func (l *Logger) mill() {
+	l.startMill.Do(func() {
+		l.millCh = make(chan bool, 1)
+		go l.millRun()
+	})
+	select {
+	case l.millCh <- true:
+	default:
+	}
+}
+
+// oldLogFiles returns the list of backup log files stored in the same
+// directory as the current log file, sorted by ModTime
+func (l *Logger) oldLogFiles() ([]logInfo, error) {
+	files, err := ioutil.ReadDir(l.dir())
+	if err != nil {
+		return nil, fmt.Errorf("can't read log file directory: %s", err)
+	}
+	logFiles := []logInfo{}
+
+	prefix, ext := l.prefixAndExt()
+
+	for _, f := range files {
+		if f.IsDir() {
+			continue
+		}
+		if t, err := l.timeFromName(f.Name(), prefix, ext); err == nil {
+			logFiles = append(logFiles, logInfo{t, f})
+			continue
+		}
+		if t, err := l.timeFromName(f.Name(), prefix, ext+compressSuffix); err == nil {
+			logFiles = append(logFiles, logInfo{t, f})
+			continue
+		}
+		// error parsing means that the suffix at the end was not generated
+		// by lumberjack, and therefore it's not a backup file.
+	}
+
+	sort.Sort(byFormatTime(logFiles))
+
+	return logFiles, nil
+}
+
+// timeFromName extracts the formatted time from the filename by stripping off
+// the filename's prefix and extension. This prevents someone's filename from
+// confusing time.parse.
+func (l *Logger) timeFromName(filename, prefix, ext string) (time.Time, error) {
+	if !strings.HasPrefix(filename, prefix) {
+		return time.Time{}, errors.New("mismatched prefix")
+	}
+	if !strings.HasSuffix(filename, ext) {
+		return time.Time{}, errors.New("mismatched extension")
+	}
+	ts := filename[len(prefix) : len(filename)-len(ext)]
+	return time.Parse(backupTimeFormat, ts)
+}
+
+// max returns the maximum size in bytes of log files before rolling.
+func (l *Logger) max() int64 {
+	if l.MaxSize == 0 {
+		return int64(defaultMaxSize * megabyte)
+	}
+	return int64(l.MaxSize) * int64(megabyte)
+}
+
+// dir returns the directory for the current filename.
+func (l *Logger) dir() string {
+	return filepath.Dir(l.filename())
+}
+
+// prefixAndExt returns the filename part and extension part from the Logger's
+// filename.
+func (l *Logger) prefixAndExt() (prefix, ext string) {
+	filename := filepath.Base(l.filename())
+	ext = filepath.Ext(filename)
+	prefix = filename[:len(filename)-len(ext)] + "-"
+	return prefix, ext
+}
+
+// compressLogFile compresses the given log file, removing the
+// uncompressed log file if successful.
+func compressLogFile(src, dst string) (err error) {
+	f, err := os.Open(src)
+	if err != nil {
+		return fmt.Errorf("failed to open log file: %v", err)
+	}
+	defer f.Close()
+
+	fi, err := osStat(src)
+	if err != nil {
+		return fmt.Errorf("failed to stat log file: %v", err)
+	}
+
+	if err := chown(dst, fi); err != nil {
+		return fmt.Errorf("failed to chown compressed log file: %v", err)
+	}
+
+	// If this file already exists, we presume it was created by
+	// a previous attempt to compress the log file.
+	gzf, err := os.OpenFile(dst, os.O_CREATE|os.O_TRUNC|os.O_WRONLY, fi.Mode())
+	if err != nil {
+		return fmt.Errorf("failed to open compressed log file: %v", err)
+	}
+	defer gzf.Close()
+
+	gz := gzip.NewWriter(gzf)
+
+	defer func() {
+		if err != nil {
+			os.Remove(dst)
+			err = fmt.Errorf("failed to compress log file: %v", err)
+		}
+	}()
+
+	if _, err := io.Copy(gz, f); err != nil {
+		return err
+	}
+	if err := gz.Close(); err != nil {
+		return err
+	}
+	if err := gzf.Close(); err != nil {
+		return err
+	}
+
+	if err := f.Close(); err != nil {
+		return err
+	}
+	if err := os.Remove(src); err != nil {
+		return err
+	}
+
+	return nil
+}
+
+// logInfo is a convenience struct to return the filename and its embedded
+// timestamp.
+type logInfo struct {
+	timestamp time.Time
+	os.FileInfo
+}
+
+// byFormatTime sorts by newest time formatted in the name.
+type byFormatTime []logInfo
+
+func (b byFormatTime) Less(i, j int) bool {
+	return b[i].timestamp.After(b[j].timestamp)
+}
+
+func (b byFormatTime) Swap(i, j int) {
+	b[i], b[j] = b[j], b[i]
+}
+
+func (b byFormatTime) Len() int {
+	return len(b)
+}