diff --git a/vendor/github.com/klauspost/compress/fse/bitwriter.go b/vendor/github.com/klauspost/compress/fse/bitwriter.go
index 43e4636..e82fa3b 100644
--- a/vendor/github.com/klauspost/compress/fse/bitwriter.go
+++ b/vendor/github.com/klauspost/compress/fse/bitwriter.go
@@ -152,12 +152,11 @@
 
 // close will write the alignment bit and write the final byte(s)
 // to the output.
-func (b *bitWriter) close() error {
+func (b *bitWriter) close() {
 	// End mark
 	b.addBits16Clean(1, 1)
 	// flush until next byte.
 	b.flushAlign()
-	return nil
 }
 
 // reset and continue writing by appending to out.
diff --git a/vendor/github.com/klauspost/compress/fse/compress.go b/vendor/github.com/klauspost/compress/fse/compress.go
index 6f34191..074018d 100644
--- a/vendor/github.com/klauspost/compress/fse/compress.go
+++ b/vendor/github.com/klauspost/compress/fse/compress.go
@@ -146,54 +146,51 @@
 		c1.encodeZero(tt[src[ip-2]])
 		ip -= 2
 	}
+	src = src[:ip]
 
 	// Main compression loop.
 	switch {
 	case !s.zeroBits && s.actualTableLog <= 8:
 		// We can encode 4 symbols without requiring a flush.
 		// We do not need to check if any output is 0 bits.
-		for ip >= 4 {
+		for ; len(src) >= 4; src = src[:len(src)-4] {
 			s.bw.flush32()
-			v3, v2, v1, v0 := src[ip-4], src[ip-3], src[ip-2], src[ip-1]
+			v3, v2, v1, v0 := src[len(src)-4], src[len(src)-3], src[len(src)-2], src[len(src)-1]
 			c2.encode(tt[v0])
 			c1.encode(tt[v1])
 			c2.encode(tt[v2])
 			c1.encode(tt[v3])
-			ip -= 4
 		}
 	case !s.zeroBits:
 		// We do not need to check if any output is 0 bits.
-		for ip >= 4 {
+		for ; len(src) >= 4; src = src[:len(src)-4] {
 			s.bw.flush32()
-			v3, v2, v1, v0 := src[ip-4], src[ip-3], src[ip-2], src[ip-1]
+			v3, v2, v1, v0 := src[len(src)-4], src[len(src)-3], src[len(src)-2], src[len(src)-1]
 			c2.encode(tt[v0])
 			c1.encode(tt[v1])
 			s.bw.flush32()
 			c2.encode(tt[v2])
 			c1.encode(tt[v3])
-			ip -= 4
 		}
 	case s.actualTableLog <= 8:
 		// We can encode 4 symbols without requiring a flush
-		for ip >= 4 {
+		for ; len(src) >= 4; src = src[:len(src)-4] {
 			s.bw.flush32()
-			v3, v2, v1, v0 := src[ip-4], src[ip-3], src[ip-2], src[ip-1]
+			v3, v2, v1, v0 := src[len(src)-4], src[len(src)-3], src[len(src)-2], src[len(src)-1]
 			c2.encodeZero(tt[v0])
 			c1.encodeZero(tt[v1])
 			c2.encodeZero(tt[v2])
 			c1.encodeZero(tt[v3])
-			ip -= 4
 		}
 	default:
-		for ip >= 4 {
+		for ; len(src) >= 4; src = src[:len(src)-4] {
 			s.bw.flush32()
-			v3, v2, v1, v0 := src[ip-4], src[ip-3], src[ip-2], src[ip-1]
+			v3, v2, v1, v0 := src[len(src)-4], src[len(src)-3], src[len(src)-2], src[len(src)-1]
 			c2.encodeZero(tt[v0])
 			c1.encodeZero(tt[v1])
 			s.bw.flush32()
 			c2.encodeZero(tt[v2])
 			c1.encodeZero(tt[v3])
-			ip -= 4
 		}
 	}
 
@@ -202,7 +199,8 @@
 	c2.flush(s.actualTableLog)
 	c1.flush(s.actualTableLog)
 
-	return s.bw.close()
+	s.bw.close()
+	return nil
 }
 
 // writeCount will write the normalized histogram count to header.
@@ -214,7 +212,7 @@
 		previous0 bool
 		charnum   uint16
 
-		maxHeaderSize = ((int(s.symbolLen) * int(tableLog)) >> 3) + 3
+		maxHeaderSize = ((int(s.symbolLen)*int(tableLog) + 4 + 2) >> 3) + 3
 
 		// Write Table Size
 		bitStream = uint32(tableLog - minTablelog)
@@ -459,15 +457,17 @@
 	for _, v := range in {
 		s.count[v]++
 	}
-	m := uint32(0)
+	m, symlen := uint32(0), s.symbolLen
 	for i, v := range s.count[:] {
+		if v == 0 {
+			continue
+		}
 		if v > m {
 			m = v
 		}
-		if v > 0 {
-			s.symbolLen = uint16(i) + 1
-		}
+		symlen = uint16(i) + 1
 	}
+	s.symbolLen = symlen
 	return int(m)
 }
 
diff --git a/vendor/github.com/klauspost/compress/fse/decompress.go b/vendor/github.com/klauspost/compress/fse/decompress.go
index 926f5f1..0c7dd4f 100644
--- a/vendor/github.com/klauspost/compress/fse/decompress.go
+++ b/vendor/github.com/klauspost/compress/fse/decompress.go
@@ -15,7 +15,7 @@
 // It is possible, but by no way guaranteed that corrupt data will
 // return an error.
 // It is up to the caller to verify integrity of the returned data.
-// Use a predefined Scrach to set maximum acceptable output size.
+// Use a predefined Scratch to set maximum acceptable output size.
 func Decompress(b []byte, s *Scratch) ([]byte, error) {
 	s, err := s.prepare(b)
 	if err != nil {
@@ -260,7 +260,9 @@
 // If the buffer is over-read an error is returned.
 func (s *Scratch) decompress() error {
 	br := &s.bits
-	br.init(s.br.unread())
+	if err := br.init(s.br.unread()); err != nil {
+		return err
+	}
 
 	var s1, s2 decoder
 	// Initialize and decode first state and symbol.