)]}' { "log": [ { "commit": "3676cb0c029c8f8f06ab703dd441c1e23e5ef333", "tree": "613e8f2a7c7b2b9e2d334830ce994f50611e9d4e", "parents": [ "481986950290323e2f5d1e774a666d4b7ed510d6" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Fri Jul 29 13:39:37 2016 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Tue Sep 13 10:36:39 2016 +0100" }, "message": "*: Remove some for statement declarations\n\nWe generally require C99. Some compilers, e.g. gcc, barf on\n\u0027for\u0027 statement declared variables, if std\u003d{gnu,c}99 or higher is not\ngiven - even while seemingly accepting other C99 constructs.\n\nAs it\u0027s trivial, remove these.\n" }, { "commit": "ae51c9d510fb7d9cc41ead8803af916c1f4b34ca", "tree": "069b3a1b5d674d215a7520211e32d314d865e17f", "parents": [ "7e49a4f99273858887806c6251d958e1e664bedf" ], "author": { "name": "Olivier Dugeon", "email": "olivier.dugeon@orange.com", "time": "Tue Apr 19 16:21:46 2016 +0200" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Tue Sep 13 10:36:38 2016 +0100" }, "message": "lib: Add new if_link_params structure\n\nThis new structure is the basis to get new link parameters for\nTraffic Engineering from Zebra/interface layer to OSPFD and ISISD\nfor the support of Traffic Engineering\n\n* lib/if.[c,h]: link parameters struture and get/set functions\n* lib/command.[c,h]: creation of a new link-node\n* lib/zclient.[c,h]: modification to the ZBUS message to convey the\n link parameters structure\n* lib/zebra.h: New ZBUS message\n* lib/memtypes.c: Add new memory type for Traffic Engineering support\n\nSigned-off-by: Olivier Dugeon \u003colivier.dugeon@orange.com\u003e\n" }, { "commit": "687bea20fa61d8fc7cf48c0b227f16d0b324778c", "tree": "14621b8d6c3e43e751b9f8ff166ad7490a2c1114", "parents": [ "9145f0e4cf776bd3156620da6c8a772fee4d4383" ], "author": { "name": "Donald Sharp", "email": "sharpd@cumulusnetworks.com", "time": "Mon Jan 25 14:56:26 2016 -0500" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Wed Jul 20 12:58:31 2016 +0100" }, "message": "lib: Allow zclient do-over of connect on initial attempt\n\nWhen a protocol is attempting to connect to the zebra daemon\nthrough it\u0027s socket. If the inital attempt fails, give it a\nfew more attempts before giving up and leaving the daemon in\na bizarre state.\n\nThis problem was found by Ashley Penney, and Ashley was of\nimmense help in debugging and testing the fix for this issue.\n\nSigned-off-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\nTested-by: Ashley Penney \u003capenney@ntoggle.com\u003e\nTested-by: NetDEF CI System \u003ccisystem@netdef.org\u003e\n" }, { "commit": "a3ee120fcf2b2b205e3e15f544eb4090653e7bff", "tree": "695c9f4c16934d2621736ef73bed6ee46b58a32c", "parents": [ "370b7e59170acf853ca3357c71dd5ab0d85e763c" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Dec 16 19:38:23 2015 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Tue Mar 08 17:53:22 2016 +0000" }, "message": "lib: fix vrf_bitmap leak in zclient_free()\n\nzclient_stop(), which is used as antagonist to zclient_init(), needs to\nundo the vrf_bitmap allocation. Otherwise zclient_init() will leak the\nallocated memory, for example when zclient_reset() is used.\n\nReported-by: Lou Berger \u003clberger@labn.net\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "bf83fa25f1bddec6f09ad879cba5e975a3ae5495", "tree": "a01a0137a4193d2d33d61bb43c113afef3e421a6", "parents": [ "2db962760426ddb9e266f9a4bc0b274584c819cc" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Tue Feb 09 15:23:03 2016 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Tue Mar 08 17:53:22 2016 +0000" }, "message": "lib: Check prefix length from zebra is sensible\n\n* zclient.c: prefix length on router-id and interface address add\n messages not sanity checked. fix.\n\n* */*_zebra.c: Prefix length on zebra route read was not checked, and\n clients use it to write to storage. An evil zebra could overflow\n client structures by sending overly long prefixlen.\n\nPrompted by discussions with:\n\nDonald Sharp \u003csharpd@cumulusnetworks.com\u003e\n" }, { "commit": "2db962760426ddb9e266f9a4bc0b274584c819cc", "tree": "406ea2dc4196e9904ab9832a7dae548f4cdcf91d", "parents": [ "405e9e19eb6ce62fa4f3f39a1f73990db9e146b7" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Mon Feb 08 14:46:28 2016 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Tue Mar 08 17:53:22 2016 +0000" }, "message": "lib: zclient can overflow (struct interface) hw_addr if zebra is evil\n\n* lib/zclient.c: (zebra_interface_if_set_value) The hw_addr_len field\n is used as trusted input to read off the hw_addr and write to the\n INTERFACE_HWADDR_MAX sized hw_addr field. The read from the stream is\n bounds-checked by the stream abstraction, however the write out to the\n heap can not be.\n\n Tighten the supplied length to stream_get used to do the write.\n\n Impact: a malicious zebra can overflow the heap of clients using the ZServ\n IPC. Note that zebra is already fairly trusted within Quagga.\n\nReported-by: Kostya Kortchinsky \u003ckostyak@google.com\u003e\n" }, { "commit": "9099f9b2a66e86f8a90d7fe18f61bd2bb1bc6744", "tree": "1ce5d2e4ecff6b57eb00d40b1a91b3f363ff35fe", "parents": [ "954c7d6bcd04c2cf037965adda0f9d11afdcd165" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Mon Jan 18 10:12:10 2016 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Fri Feb 26 14:11:46 2016 +0000" }, "message": "*: use an ifindex_t type, defined in lib/if.h, for ifindex values\n" }, { "commit": "954c7d6bcd04c2cf037965adda0f9d11afdcd165", "tree": "707ba870b0989d08a98e6b969fc1e2388f09e1c0", "parents": [ "4d3ae716ce86c28e3979c9ae57c4e717ac5e27e4" ], "author": { "name": "Timo Teräs", "email": "timo.teras@iki.fi", "time": "Fri Jan 15 17:36:33 2016 +0200" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Fri Feb 26 14:11:46 2016 +0000" }, "message": "lib, zebra: unify link layer type and hardware address handling\n\nThis removes the BSD specific usage of struct sockaddr_dl\nhardware address. This unifies to use explict hw_addr member for\nthe address, and zebra specific enumeration for the link layer\ntype.\n\nAdditionally the zapi is updated to never send platform specific\nstructures over the wire, but the ll_type along with hw_addr_len\nand hw_addr are now sent for all platforms.\n\nBased on initial work by Paul Jakma.\n\nSigned-off-by: Timo Teräs \u003ctimo.teras@iki.fi\u003e\nSigned-off-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\n" }, { "commit": "b11f3b54c842117e22e2f5cf1561ea34eee8dfcc", "tree": "c31f9893baa2a05db24ea72d1370fb6b11f59c20", "parents": [ "7eb6136b2732d4782360f9f376336c6d4f667ff0" ], "author": { "name": "Timo Teräs", "email": "timo.teras@iki.fi", "time": "Mon Nov 02 16:50:07 2015 +0200" }, "committer": { "name": "Donald Sharp", "email": "sharpd@cumulusnetworks.com", "time": "Tue Dec 08 14:12:10 2015 -0500" }, "message": "zebra: implement per-route mtu handling\n\nThis commits allow overriding MTU using netlink attributes on\nper-route basis. This is useful for routing protocols that can\nadvertice prefix specific MTUs between routers (e.g. NHRP).\n\nSigned-off-by: Timo Teräs \u003ctimo.teras@iki.fi\u003e\n" }, { "commit": "7125293d65d73a451ec203c8c1630c236171f5a3", "tree": "f9d118c9a8f8374d69fb9c75c87531a2ca478fb2", "parents": [ "fd1c1a133af47ae5533a5ed41b73ff62e7aa1058" ], "author": { "name": "Donald Sharp", "email": "sharpd@cumulusnetworks.com", "time": "Thu Sep 24 09:25:19 2015 -0400" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Tue Oct 27 10:53:21 2015 +0000" }, "message": "lib: zclient.c remove extern struct thread_master *\n\nzclient.c depended upon link time inclusion of a\nextern struct thread_master *master. This is a violation of the\nnamespace of the calling daemon. If a library needs the pointer\npass it in and save it for future use.\n\nThis code change also makes the zclient code consistent with\nthe other lib functions that need to schedule work on your behalf\n\nSigned-off-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\n" }, { "commit": "a9d4cb33faa6af622240190a80f41c4672374925", "tree": "9590bb1715d7418b50a742a3c83363d4e4b67755", "parents": [ "f733280419f18b1a0e3b06ec3681781689d57053" ], "author": { "name": "Donald Sharp", "email": "sharpd@cumulusnetworks.com", "time": "Thu Sep 17 10:54:25 2015 -0400" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Thu Sep 24 15:26:44 2015 +0100" }, "message": "lib/zclient: Consolidate error reporting for zclient_read_header\n\nAll functions that call zclient_read_header immediately turn around\nand check to ensure that the version and marker fields are correct\nMove this code into zclient_read_header\n\nSigned-off-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\n" }, { "commit": "794c4735f81289d9fc603b5fd5e4a5d39dbb5ca5", "tree": "b81f6a549fe0916bdf25b5a5a88745c34a4e816d", "parents": [ "a29c8a23a35b3f94c6aea5b3b7578b5dbf81ad71" ], "author": { "name": "Nicolas Dichtel", "email": "nicolas.dichtel@6wind.com", "time": "Wed Sep 16 09:42:36 2015 +0200" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Thu Sep 24 15:26:41 2015 +0100" }, "message": "bgpd/pimd: fix zAPI parsing\n\nCommit c99f3481a598 has changed the API. Now, the vrfid has been added in\nthe header, thus we must read it before parsing the rest of the message.\n\nTo ease code maintenance, let\u0027s add a new function to read a zAPI header.\n\nFixes: c99f3481a598 (\"*: add VRF ID in the API message header\")\nReported-by: Martin Winter \u003cmwinter@opensourcerouting.org\u003e\nSigned-off-by: Nicolas Dichtel \u003cnicolas.dichtel@6wind.com\u003e\nAcked-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\nTested-by: Martin Winter \u003cmwinter@opensourcerouting.org\u003e\n" }, { "commit": "c99f3481a598e9cadd1de96714f6b5df9ad85c4a", "tree": "aac6df566f28c13fce5c9f02275f159fab73a24d", "parents": [ "758fb8f99a7bfac3d31c419fd1a5694fc5f33f6a" ], "author": { "name": "Feng Lu", "email": "lu.feng@6wind.com", "time": "Thu Oct 16 09:52:36 2014 +0800" }, "committer": { "name": "Nicolas Dichtel", "email": "nicolas.dichtel@6wind.com", "time": "Wed Jun 03 10:24:12 2015 +0200" }, "message": "*: add VRF ID in the API message header\n\nThe API messages are used by zebra to exchange the interfaces, addresses,\nroutes and router-id information with its clients. To distinguish which\nVRF the information belongs to, a new field \"VRF ID\" is added in the\nmessage header. And hence the message version is increased to 3.\n\n* The new field \"VRF ID\" in the message header:\n\n Length (2 bytes)\n Marker (1 byte)\n Version (1 byte)\n VRF ID (2 bytes, newly added)\n Command (2 bytes)\n\n - Client side:\n\n - zclient_create_header() adds the VRF ID in the message header.\n - zclient_read() extracts and validates the VRF ID from the header,\n and passes the VRF ID to the callback functions registered to\n the API messages.\n - All relative functions are appended with a new parameter \"vrf_id\",\n including all the callback functions.\n - \"vrf_id\" is also added to \"struct zapi_ipv4\" and \"struct zapi_ipv6\".\n Clients need to correctly set the VRF ID when using the API\n functions zapi_ipv4_route() and zapi_ipv6_route().\n - Till now all messages sent from a client have the default VRF ID\n \"0\" in the header.\n - The HELLO message is special, which is used as the heart-beat of\n a client, and has no relation with VRF. The VRF ID in the HELLO\n message header will always be 0 and ignored by zebra.\n\n - Zebra side:\n\n - zserv_create_header() adds the VRF ID in the message header.\n - zebra_client_read() extracts and validates the VRF ID from the\n header, and passes the VRF ID to the functions which process\n the received messages.\n - All relative functions are appended with a new parameter \"vrf_id\".\n\n* Suppress the messages in a VRF which a client does not care:\n\n Some clients may not care about the information in the VRF X, and\n zebra should not send the messages in the VRF X to those clients.\n\n Extra flags are used to indicate which VRF is registered by a client,\n and a new message ZEBRA_VRF_UNREGISTER is introduced to let a client\n can unregister a VRF when it does not need any information in that\n VRF.\n\n A client sends any message other than ZEBRA_VRF_UNREGISTER in a VRF\n will automatically register to that VRF.\n\n - lib/vrf:\n\n A new utility \"VRF bit-map\" is provided to manage the flags for\n VRFs, one bit per VRF ID.\n\n - Use vrf_bitmap_init()/vrf_bitmap_free() to initialize/free a\n bit-map;\n - Use vrf_bitmap_set()/vrf_bitmap_unset() to set/unset a flag\n in the given bit-map, corresponding to the given VRF ID;\n - Use vrf_bitmap_check() to test whether the flag, in the given\n bit-map and for the given VRF ID, is set.\n\n - Client side:\n\n - In \"struct zclient\", the following flags are changed from\n \"u_char\" to \"vrf_bitmap_t\":\n redist[ZEBRA_ROUTE_MAX]\n default_information\n These flags are extended for each VRF, and controlled by the\n clients themselves (or with the help of zclient_redistribute()\n and zclient_redistribute_default()).\n\n - Zebra side:\n\n - In \"struct zserv\", the following flags are changed from\n \"u_char\" to \"vrf_bitmap_t\":\n redist[ZEBRA_ROUTE_MAX]\n redist_default\n ifinfo\n ridinfo\n\n These flags are extended for each VRF, as the VRF registration\n flags. They are maintained on receiving a ZEBRA_XXX_ADD or\n ZEBRA_XXX_DELETE message.\n\n When sending an interface/address/route/router-id message in\n a VRF to a client, if the corresponding VRF registration flag\n is not set, this message will not be dropped by zebra.\n\n - A new function zread_vrf_unregister() is introduced to process\n the new command ZEBRA_VRF_UNREGISTER. All the VRF registration\n flags are cleared for the requested VRF.\n\n Those clients, who support only the default VRF, will never receive\n a message in a non-default VRF, thanks to the filter in zebra.\n\n* New callback for the event of successful connection to zebra:\n\n - zclient_start() is splitted, keeping only the code of connecting\n to zebra.\n\n - Now zclient_init()\u003d\u003ezclient_connect()\u003d\u003ezclient_start() operations\n are purely dealing with the connection to zbera.\n\n - Once zebra is successfully connected, at the end of zclient_start(),\n a new callback is used to inform the client about connection.\n\n - Till now, in the callback of connect-to-zebra event, all clients\n send messages to zebra to request the router-id/interface/routes\n information in the default VRF.\n\n Of corse in future the client can do anything it wants in this\n callback. For example, it may send requests for both default VRF\n and some non-default VRFs.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: Nicolas Dichtel \u003cnicolas.dichtel@6wind.com\u003e\nAcked-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\n" }, { "commit": "41eb9a4305fbcb206c900a18af7df7115d857d60", "tree": "d132fa1a4e113aa5d0bcf84d60933b36383b182d", "parents": [ "53009d387a633997b16d32224b50451b5c81b61a" ], "author": { "name": "Timo Teräs", "email": "timo.teras@iki.fi", "time": "Sat May 23 11:08:39 2015 +0300" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Mon Jun 01 16:31:14 2015 +0200" }, "message": "lib: make prefix2str simpler to use, and use it in zclient\n\nReturning the buffer allows using it in the logging functions\nin easier way. This also makes the API consistent with sockunion.\n\nAdd also PREFIX_STRLEN to be the generic buffer length required\nfor any prefix string representation.\n\nSigned-off-by: Timo Teräs \u003ctimo.teras@iki.fi\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "fd8f6ebb4c6b9e5364b98d2b5fd345d1dcc08824", "tree": "1976b8f404ed9293af119fc733117607b5c372ec", "parents": [ "81a4e85442e2011a47bbb25e8301dc40ec4ed9b6" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Mar 03 08:57:02 2015 +0100" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Apr 21 10:18:44 2015 +0200" }, "message": "lib: use const consistently for zserv path\n\nThe global variable is missing its const, but the accessor function has\na meaningless extra const in exchange...\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "eed3c48d3a7d2dae2cae2f2f250deffb843754a6", "tree": "07b2252438225065024d4a534eddf0e86c9b87a4", "parents": [ "ef008d2f8dc8f7160d8a3d24a15f2fad79ef3242" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Mar 03 08:51:53 2015 +0100" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Apr 21 10:17:31 2015 +0200" }, "message": "*: use void * for printing pointers\n\nOn higher warning levels, compilers expect %p printf arguments to be\nvoid *. Since format string / argument warnings can be useful\notherwise, let\u0027s get rid of this noise by sprinkling casts to void *\nover printf calls.\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "1a9352a7487531578a0db9ca86c2647f8e304ca4", "tree": "6976654d72a38f91d0f26e57d981f57c18a552fd", "parents": [ "ea537be5278398cd8c32f8046e4789e613420916" ], "author": { "name": "Everton Marques", "email": "everton.marques@gmail.com", "time": "Tue Sep 23 14:33:34 2014 -0300" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Feb 04 06:08:00 2015 +0100" }, "message": "zclient: Revert lib export of zclient_socket()/zclient_socket_un().\n" }, { "commit": "1f298949bea9e58623eb81f245491dcdb1df8c59", "tree": "43f99443889cd692a3f6c8adfc40328a868efb67", "parents": [ "7cb0d4a384b4964cc53b61549ffdef37fb0d76c5" ], "author": { "name": "Everton Marques", "email": "everton.marques@gmail.com", "time": "Thu Aug 21 15:47:28 2014 -0300" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Feb 04 06:07:59 2015 +0100" }, "message": "pimd: -z command-line switch to specify zebra socket path.\n" }, { "commit": "f62a19cc281276607b164c99e672d536a012514d", "tree": "f6a504fcf1adf31c4d3c32acf984dbc51faa3357", "parents": [ "5c55a496fae5ab089c5009bc4c03084fdeb51f55" ], "author": { "name": "Everton Marques", "email": "everton.marques@gmail.com", "time": "Thu Jul 03 14:53:44 2014 -0300" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Feb 04 06:07:57 2015 +0100" }, "message": "zebra: Export zclient_socket_un().\n" }, { "commit": "ff57d3653efe4a1428147204b54cacf3651c4dd0", "tree": "0b9ae54ba0da0f9a0391830445751495a248f11b", "parents": [ "829198800217fe321faa397d21e2d8f99fcaf0dd" ], "author": { "name": "Everton Marques", "email": "everton.marques@gmail.com", "time": "Wed Jun 25 15:54:03 2014 -0300" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Feb 04 06:07:56 2015 +0100" }, "message": "pimd: Fixes to build against current quagga.\n" }, { "commit": "90444ca35e3037ed43ec695428f0ef6d82f9a320", "tree": "441582b4f1ee1118f6b9b696fed65a2c38064503", "parents": [ "ad2f92b6b07883f6a2a26499eab1776933185960" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Jul 01 16:14:05 2014 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Mon Aug 18 18:16:28 2014 +0200" }, "message": "lib: unset ZEBRA_IFA_PEER if no dst addr present (BZ#801)\n\nOn OpenBSD, carp interfaces claim to be PtP interfaces with a 0.0.0.0/0\npeer address. We process those in zebra and try to send them to\nclients, at which point they get encoded as all-0. The client code,\nhowever, decodes that to a NULL pointer instead of 0.0.0.0. This later\nturns into a SEGV when CONNECTED_PREFIX sees that ZEBRA_IFA_PEER is set\nand tries to access the peer prefix.\n\nThis is a band-aid fix for stable/0.99.23, a long-term solution needs\nsome conceptual improvements on the entire thing.\n\n(The usefulness of a PtP-to-0.0.0.0/0 is a separate question; at this\npoint dropping the peer prefix seems the least intrusive solution.)\n\nReported-by: Laurent Lavaud \u003claurent.lavaud@ladtech.fr\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "6b0655a25194c7c0331154edaa6124cf783e5e5e", "tree": "c0c7d479f2684531249668210da27a60322ba395", "parents": [ "fdb913aedb5a9807ad60715e8badb4f25d57acea" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Jun 04 06:53:35 2014 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Jun 04 06:58:02 2014 +0200" }, "message": "*: nuke ^L (page feed)\n\nQuagga sources have inherited a slew of Page Feed (^L, \\xC) characters\nfrom ancient history. Among other things, these break patchwork\u0027s\nXML-RPC API because \\xC is not a valid character in XML documents.\n\nNuke them from high orbit.\n\nPatches can be adapted simply by:\n\tsed -e \u0027s%^L%%\u0027 -i filename.patch\n(you can type page feeds in some environments with Ctrl-V Ctrl-L)\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "ca3ccd8748434719e4670ce812d1310013fad518", "tree": "3fae89070206bc47704a456219350c34b5f8ea54", "parents": [ "8d083b9ec5bb0375ebb6d8b2b05c848febd92cb5" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Sep 26 14:52:39 2012 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Jan 16 01:45:57 2013 +0100" }, "message": "zebra: fix sockaddr_dl length assumptions (BZ#737)\n\nQuagga makes bad assumptions about sockaddr_dl (on NetBSD, but possibly\non other systems as well). Particularly, sizeof(struct sockaddr_dl)\nreturns a size that does not include the full sdl_data field, leading to\nnot enough data being copied. This breaks IPv6 RAs in particular, as\na broken mac address from sockaddr_dl will be included in the packets.\n\nFrom: Matthias-Christian Ott \u003cott@mirix.org\u003e\nTested-by: Uwe Toenjes \u003c6bone@6bone.informatik.uni-leipzig.de\u003e\n[further simplified + more comments]\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "14d2bbaa3f4aa53152472694c29f336808e47313", "tree": "e39bdddef4ea53207dd8fb61e1fd6b54d8c7721d", "parents": [ "51d4ef832c1e58150325630e25c442866e5a6cf5", "e96b312150d8e376c1ef463793d1929eca3618d5" ], "author": { "name": "Avneesh Sachdev", "email": "avneesh@opensourcerouting.org", "time": "Wed Apr 11 23:51:08 2012 -0700" }, "committer": { "name": "Avneesh Sachdev", "email": "avneesh@opensourcerouting.org", "time": "Wed Apr 11 23:51:08 2012 -0700" }, "message": "Merge quagga mainline into the google ISIS code.\n\nThe steps were:\n\n $ git checkout google-is-is\n $ git merge quagga\n $ git checkout google-is-is -- isisd\n\n # Resolve conflicts in the following:\n lib/md5.h\n zebra/rt_netlink.c\n zebra/zebra_rib.c\n zebra/zserv.c\n\nNote that the content in the isisd directory is left unchanged in the\nmerge. As a result, changes made to isisd as part of the following\ncommits on the quagga mainline are dropped.\n\n # 8ced4e82 is the merge base, e96b3121 is the current quagga master\n $ git log --oneline --reverse 8ced4e82..e96b3121 -- isisd\n 5574999 isisd: fix crash on \"no router isis\" (BZ#536)\n 8998075 isisd: raise hello rate for DIS (BZ#539)\n 306ca83 isisd: include hash.h, not hash.c\n b82cdeb delete CVS keywords\n 2f65867 isisd: indent longopts array\n b511468 quagga: option \"-z\" (\"--socket \u003cpath\u003e\") added\n 05e54ee build: delete .cvsignore files\n b4e45f6 fix zebra protocol after MP-BGP changes\n 7fd6cd8 isisd: fix circuit state machine\n 907fd95 isisd: send proper LSP after DIS election\n d034aa0 isisd: fix wrong next-hops from SPF\n c25eaff isisd: unexpected kernel routing table (BZ#544)\n e6b03b7 isisd: implement MD5 circuit authentication\n" }, { "commit": "51d4ef832c1e58150325630e25c442866e5a6cf5", "tree": "df155c4193531a37f651d4151866f18224f8ca4b", "parents": [ "2dd04c5dc8b5a09cce1c251361fa58f26398fd9f" ], "author": { "name": "Josh Bailey", "email": "joshb@google.com", "time": "Wed Mar 21 17:13:39 2012 -0700" }, "committer": { "name": "Avneesh Sachdev", "email": "avneesh@opensourcerouting.org", "time": "Sun Apr 08 01:19:41 2012 -0700" }, "message": "zebra: include hardware addr in if up/down messages\n\nChange interface up/down notification messages to also include the\nhardware address of the interface. The format of these messages is now\nidentical to the interface add message -- move the serialization code\nto common functions.\n\n * lib/zclient.c: Modify zebra_interface_if_set_value() to also parse\n the hardware address. Invoke it from zebra_interface_add_read()\n and and zebra_interface_state_read().\n\n * zebra/zserv.c: Add zserv_encode_interface(). Invoke it from\n zserv_interface_add(), zserv_interface_delete() and\n zserv_interface_update().\n" }, { "commit": "c7ec179a95c1ed4fcd3d3be3f981c8c20dce534a", "tree": "add6824e168ab26a28390a1d1b9a2c7be1484435", "parents": [ "cddf391bf6839e9f093cef15508669c1f3f92122" ], "author": { "name": "G.Balaji", "email": "balajig81@gmail.com", "time": "Sat Nov 26 22:04:05 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Mon Jan 23 14:30:50 2012 +0400" }, "message": "bgpd: IPv6 MP-BGP Routes addition and deletion\n\nThis patch contains the following:\n1. Addition of IPv6 SAFI_MULTICAST BGP routes into the BGP Multicast RIB.\n2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.\n" }, { "commit": "5a616c08ce089e25dc0e8da920727af4d11279bf", "tree": "4b5650d6602d06d0188102469e3b402abe81f16a", "parents": [ "6ae93c058725991df5a9ae35cefec368919b5fea" ], "author": { "name": "G.Balaji", "email": "balajig81@gmail.com", "time": "Sat Nov 26 21:58:42 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Mon Jan 23 14:30:33 2012 +0400" }, "message": "bgpd: IPv4 MP-BGP Routes addition and deletion\n\nThis patch contains the following:\n1. Addition of IPv4 SAFI_MULTICAST BGP routes into the BGP Multicast RIB.\n2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.\n" }, { "commit": "2ea1ab1c30c765cd4703794fcfaf044454fb533c", "tree": "650e97a5a9e8cc1fb8666ff6ce87647df3e0e604", "parents": [ "2654e43ca2eaa8d93268c9ec85ac2dd968e5fb94" ], "author": { "name": "Vyacheslav Trushkin", "email": "me@dogonthesun.net", "time": "Sun Dec 11 18:48:47 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Mon Jan 02 18:37:24 2012 +0400" }, "message": "zebra: ZEBRA_HELLO and mopping up routes (BZ#448)\n\nZEBRA_HELLO message is used by routing daemons to inform zebra\nwhat type of routes daemon will be announcing to zebra. Also\nzebra uses route_type_oaths array to track which daemon announces\nwhich protocol. Zebra mops up routes if daemon didn\u0027t for some\nreason.\n" }, { "commit": "9206f9ecd5526778bf449bbb12f056d681d3b040", "tree": "cd11853fe47a30bb2a28838f6ad8f8d49300b4fa", "parents": [ "b48cebbba0dc01ad7d1fbd7cbcc39a11e1ae972d" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Sun Dec 18 19:43:40 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Sun Dec 18 20:21:21 2011 +0400" }, "message": "fix set never used warnings\n\n(This patch was modified to leave calls to stream_getl() in place, they\nare necessary for the stream\u0027s internal pointer to advance to the\ncorrect position. -- Denis)\n\nSigned-off-by: Denis Ovsienko \u003cinfrastation@yandex.ru\u003e\n\nFix gcc warnings about varables that are set but never used.\n\n* bgpd/bgp_attr.c\n * cluster_unintern(): ret\n * transit_unintern(): ret\n * bgp_attr_default_intern(): attre\n * bgp_mp_reach_parse(): rd_high, rd_low\n* bgpd/bgp_route.c\n * bgp_announce_check_rsclient(): bgp\n* bgpd/bgp_zebra.c\n * zebra_read_ipv4(): ifindex\n * zebra_read_ipv6(): ifindex\n* bgpd/bgpd.c\n * bgp_config_write_peer(): filter\n* lib/distribute.c\n * distribute_list_all(): dist\n * distribute_list(): dist\n * distribute_list_prefix_all(): dist\n * distribute_list_prefix(): dist\n* lib/if_rmap.c\n * if_rmap(): if_rmap\n* lib/vty.c\n * vty_accept(): vty\n* lib/zclient.c\n * zclient_read(): ret\n* zebra/irdp_interface.c\n * if_group(): zi\n* zebra/rt_netlink.c\n * kernel_read(): ret, sock\n" }, { "commit": "3414d03545205eda9fb47890e01b780485a613c6", "tree": "cee18b7543db0e84c41446c6f1b55a484da14374", "parents": [ "b51146856e660bcec723f535c17dc1c38b2f6efc" ], "author": { "name": "Vyacheslav Trushkin", "email": "me@dogonthesun.net", "time": "Wed Nov 30 21:03:44 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Tue Dec 13 14:26:45 2011 +0400" }, "message": "lib: clearing zclient.c for some cases of building\n\nlib/zclient.c: using of HAVE_TCP_ZEBRA in zclient_socket_*\ndefinitions extended by else clause.\n" }, { "commit": "b51146856e660bcec723f535c17dc1c38b2f6efc", "tree": "8f501c98b3714e1d5ed381bd4d82fece4106aa8c", "parents": [ "2f658673fa477b58ed38caf94c156c95948de382" ], "author": { "name": "Vyacheslav Trushkin", "email": "me@dogonthesun.net", "time": "Fri Nov 25 18:51:48 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Tue Dec 13 14:26:28 2011 +0400" }, "message": "quagga: option \"-z\" (\"--socket \u003cpath\u003e\") added\n\nAll daemons modified to support custom path to zserv\nsocket.\n\nlib: generalize a zclient connection\n\nzclient_socket_connect added. zclient_socket and\nzclient_socket_un were hidden under static expression.\n\"zclient_serv_path_set\" modified.\n" }, { "commit": "08a7a91646a1ee317c402b421e3a7036a640bcf4", "tree": "59dc48ed11f69a61cd282783ffab25f30073f334", "parents": [ "4c9641ba4df276080c670e03f65b1d442660a50f" ], "author": { "name": "Dmitry Tejblum", "email": "tejblum@yandex-team.ru", "time": "Mon Oct 18 19:05:39 2010 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Mon Oct 18 19:05:39 2010 +0400" }, "message": "zclient: fix router-id calculation for IPv6 (#595)\n\nIf router-id is not specified in ospf6d.conf, ospf6d will get it from\nthe zebra daemon. But ospf6d originates Link LSAs before the router-id\nis returned by zebra, thus this router\u0027s Link LSAs will be flooded\nwith AdvRouter set to 0.\n\n* zclient.c: zclient_start(): send ZEBRA_INTERFACE_ADD message after\n ZEBRA_ROUTER_ID_ADD, not before\n" }, { "commit": "228da42898c4f7bd72d9c1ee4135108e8d40d860", "tree": "a780ed018bfeb97c174958f188c770c74a48bad9", "parents": [ "54a15182e05ca757db3bb90a4135e9f8fd3c84f2" ], "author": { "name": "Chris Caputo", "email": "ccaputo@alt.net", "time": "Sat Jul 18 05:44:03 2009 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Sun Jul 19 18:28:08 2009 +0100" }, "message": "[bgpd] Stability fixes including bugs 397, 492\n\nI\u0027ve spent the last several weeks working on stability fixes to bgpd.\nThese patches fix all of the numerous crashes, assertion failures, memory\nleaks and memory stomping I could find. Valgrind was used extensively.\n\nAdded new function bgp_exit() to help catch problems. If \"debug bgp\" is\nconfigured and bgpd exits with status of 0, statistics on remaining\nlib/memory.c allocations are printed to stderr. It is my hope that other\ndevelopers will use this to stay on top of memory issues.\n\nExample questionable exit:\n\n bgpd: memstats: Current memory utilization in module LIB:\n bgpd: memstats: Link List : 6\n bgpd: memstats: Link Node : 5\n bgpd: memstats: Hash : 8\n bgpd: memstats: Hash Bucket : 2\n bgpd: memstats: Hash Index : 8\n bgpd: memstats: Work queue : 3\n bgpd: memstats: Work queue item : 2\n bgpd: memstats: Work queue name string : 3\n bgpd: memstats: Current memory utilization in module BGP:\n bgpd: memstats: BGP instance : 1\n bgpd: memstats: BGP peer : 1\n bgpd: memstats: BGP peer hostname : 1\n bgpd: memstats: BGP attribute : 1\n bgpd: memstats: BGP extra attributes : 1\n bgpd: memstats: BGP aspath : 1\n bgpd: memstats: BGP aspath str : 1\n bgpd: memstats: BGP table : 24\n bgpd: memstats: BGP node : 1\n bgpd: memstats: BGP route : 1\n bgpd: memstats: BGP synchronise : 8\n bgpd: memstats: BGP Process queue : 1\n bgpd: memstats: BGP node clear queue : 1\n bgpd: memstats: NOTE: If configuration exists, utilization may be expected.\n\nExample clean exit:\n\n bgpd: memstats: No remaining tracked memory utilization.\n\nThis patch fixes bug #397: \"Invalid free in bgp_announce_check()\".\n\nThis patch fixes bug #492: \"SIGBUS in bgpd/bgp_route.c:\nbgp_clear_route_node()\".\n\nMy apologies for not separating out these changes into individual patches.\nThe complexity of doing so boggled what is left of my brain. I hope this\nis all still useful to the community.\n\nThis code has been production tested, in non-route-server-client mode, on\na linux 32-bit box and a 64-bit box.\n\nRelease/reset functions, used by bgp_exit(), added to:\n\n bgpd/bgp_attr.c,h\n bgpd/bgp_community.c,h\n bgpd/bgp_dump.c,h\n bgpd/bgp_ecommunity.c,h\n bgpd/bgp_filter.c,h\n bgpd/bgp_nexthop.c,h\n bgpd/bgp_route.c,h\n lib/routemap.c,h\n\nFile by file analysis:\n\n* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.\n\n* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().\n\n* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from\n bgp_exit().\n\n* bgpd/bgp_filter.c: Fix aslist-\u003ename use without allocation check, and\n also fix memory leak.\n\n* bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees\n allocations made as part of bgpd initialization and, to some extent,\n configuration. If \"debug bgp\" is configured, memory stats are printed\n as described above.\n\n* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for\n ibuf/obuf, so bgp_scan_init() shouldn\u0027t do it too. Also, made it so\n zlookup is global so bgp_exit() can use it.\n\n* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()\n adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.\n\n* bgpd/bgp_route.h: Correct reference counter \"lock\" to be signed.\n bgp_clear_route() now accepts a bgp_clear_route_type of either\n BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.\n\n* bgpd/bgp_route.c:\n - bgp_process_rsclient(): attr was being zero\u0027ed and then\n bgp_attr_extra_free() was being called with it, even though it was\n never filled with valid data.\n\n - bgp_process_rsclient(): Make sure rsclient-\u003egroup is not NULL before\n use.\n\n - bgp_processq_del(): Add call to bgp_table_unlock().\n\n - bgp_process(): Add call to bgp_table_lock().\n\n - bgp_update_rsclient(): memset clearing of new_attr not needed since\n declarationw with \"\u003d { 0 }\" does it. memset was already commented\n out.\n\n - bgp_update_rsclient(): Fix screwed up misleading indentation.\n\n - bgp_withdraw_rsclient(): Fix screwed up misleading indentation.\n\n - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.\n\n - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also\n free struct bgp_clear_node_queue used for work item.\n\n - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in\n case peer is released by peer_unlock() call.\n\n - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use\n struct bgp_clear_node_queue to supply data to worker. Add call to\n bgp_table_lock().\n\n - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or\n BGP_CLEAR_ROUTE_MY_RSCLIENT.\n\n - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.\n\n Bug 397 fixes:\n\n - bgp_default_originate()\n - bgp_announce_table()\n\n* bgpd/bgp_table.h:\n - struct bgp_table: Added reference count. Changed type of owner to be\n \"struct peer *\" rather than \"void *\".\n\n - struct bgp_node: Correct reference counter \"lock\" to be signed.\n\n* bgpd/bgp_table.c:\n - Added bgp_table reference counting.\n\n - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if\n set.\n\n - bgp_unlock_node(): Added assertion.\n\n - bgp_node_get(): Added call to bgp_lock_node() to code path that it was\n missing from.\n\n* bgpd/bgp_vty.c:\n - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment\n to owner. Handle failure gracefully.\n\n - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with\n BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.\n\n* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.\n\n* bgpd/bgpd.c:\n - peer_lock(): Allow to be called when status is \"Deleted\".\n\n - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to\n bgp_clear_route() call.\n\n - peer_delete(): Common variable listnode pn. Fix bug in which rsclient\n was only dealt with if not part of a peer group. Call\n bgp_clear_route() for rsclient, if appropriate, and do so with\n BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.\n\n - peer_group_get(): Use XSTRDUP() instead of strdup() for conf-\u003ehost.\n\n - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with\n BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.\n\n - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self-\u003ehost.\n\n - bgp_delete(): Delete peers before groups, rather than after. And then\n rather than deleting rsclients, verify that there are none at this\n point.\n\n - bgp_unlock(): Add assertion.\n\n - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.\n\n* lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed\n massive leak in install_element() in which cmd_make_descvec() was being\n called more than once for the same cmd-\u003estrvec/string/doc.\n\n* lib/log.c: Make closezlog() check fp before calling fclose().\n\n* lib/memory.c: Catch when alloc count goes negative by using signed\n counts. Correct #endif comment. Add log_memstats_stderr().\n\n* lib/memory.h: Add log_memstats_stderr().\n\n* lib/thread.c: thread-\u003efuncname was being accessed in thread_call() after\n it had been freed. Rearranged things so that thread_call() frees\n funcname. Also made it so thread_master_free() cleans up cpu_record.\n\n* lib/vty.c,h: Use global command_cr. Add vty_terminate().\n\n* lib/zclient.c,h: Re-enable zclient_free().\n" }, { "commit": "393deb9bd663361e6b110d579a8b1d4c22667068", "tree": "e93ebf2f57bf92ff7a9cd045764b3cdbb99a07e5", "parents": [ "3453a7122c1d585ad789ed0f63deb90cc5e89fae" ], "author": { "name": "Stephen Hemminger", "email": "stephen.hemminger@vyatta.com", "time": "Mon Aug 18 14:13:29 2008 -0700" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Jun 12 17:07:49 2009 +0100" }, "message": "[cleanup] Convert XMALLOC/memset to XCALLOC\n\nSimple conversion of XMALLOC/memset to XCALLOC\n" }, { "commit": "6f0e3f6e17687eb25b7b77c4fdc8324837d4700f", "tree": "8a94d9212060f0f2ee7cbd0079c2687eed7348dc", "parents": [ "08d3d5b398ae81de7659509f159e814d1bbd4375" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 10 02:38:51 2007 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 10 02:38:51 2007 +0000" }, "message": "[autoconf] bugs 162,303,178: Fix \u0027present but can not be compiled\u0027 warnings\n\n2007-05-09 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* configure.ac: sys/conf.h depends on sys/param.h, at least on\n\t FBSD 6.2.\n\t (bug #363) Should check for in_pktinfo for IRDP\n\n2006-05-27 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* configure.ac: General cleanup of header and type checks, introducing\n\t an internal define, QUAGGA_INCLUDES, to build up a list of\n\t stuff to include so as to avoid \u0027present but cant be compiled\u0027\n\t warnings.\n\t Misc additional checks of things missing according to autoscan.\n\t Add LIBM, for bgpd\u0027s use of libm, so as to avoid burdening\n\t LIBS, and all the binaries, with libm linkage.\n\t Remove the bad practice of using m4 changequote(), just\n\t quote the []\u0027s in the case statements properly.\n\t This should fix bugs 162, 303 and 178.\n\t* */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced\n\t HAVE_* defines. I.e. HAVE_SA_LEN -\u003e HAVE_STRUCT_SOCKADDR_SA_LEN,\n\t* bgpd/Makefile.am: Add LIBM to bgpd\u0027s LDADD, for pow().\n" }, { "commit": "e4529636b77124285cca96a62799d0ff6a7addeb", "tree": "a8a50de7413833d5277ed7309248e03719e9efd3", "parents": [ "43cd33a44e010f818633b7f144b5a0be352b41e7" ], "author": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Tue Dec 12 19:18:21 2006 +0000" }, "committer": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Tue Dec 12 19:18:21 2006 +0000" }, "message": "[PtP over ethernet] New peer flag allows much more addressing flexibility\n\n2006-12-12 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating\n\t whether a peer address has been configured. Comment now shows\n\t the new interpretation of the destination addr: if ZEBRA_IFA_PEER\n\t is set, then it must contain the destination address, otherwise\n\t it may contain the broadcast address or be NULL.\n\t (CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete\n\t macros that were specific to IPv4 and not fully general.\n\t (CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.\n\t (CONNECTED_PREFIX) New macro giving the prefix to insert into\n\t the RIB: if CONNECTED_PEER, then use the destination (peer) address,\n\t else use the address field.\n\t (CONNECTED_ID) New macro to come up with an identifying address\n\t for the struct connected.\n\t* if.c: (if_lookup_address, connected_lookup_address) Streamline\n\t logic with new CONNECTED_PREFIX macro.\n\t* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros\n\t for better performance than the general prefix_copy function.\n\t* zclient.c: (zebra_interface_address_read) For non-null destination\n\t addresses, set prefixlen to equal the address prefixlen. This\n\t is needed to get the new CONNECTED_PREFIX macro to work properly.\n\t* connected.c: (connected_up_ipv4, connected_down_ipv4,\n\t connected_up_ipv6, connected_down_ipv6) Simplify logic using the\n\t new CONNECTED_PREFIX macro.\n\t (connected_add_ipv4) Set prefixlen in destination addresses (required\n\t by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead\n\t of testing for IFF_POINTOPOINT. Delete invalid warning message.\n\t Warn about cases where the ZEBRA_IFA_PEER is set but no\n\t destination address has been supplied (and turn off the flag).\n\t (connected_add_ipv6) Add new flags argument so callers may set\n\t the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies\n\t IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.\n\t Set prefixlen in destination address so CONNECTED_PREFIX will work.\n\t* connected.h: (connected_add_ipv6) Add new flags argument so\n\t callers may set the ZEBRA_IFA_PEER flag.\n\t* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro\n\t to decide whether the destination address is a peer or broadcast\n\t address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).\n\t* if_ioctl.c: (if_getaddrs) Instead of setting a peer address\n\t only when the IFF_POINTOPOINT is set, we now accept a peer\n\t address whenever it is available and not the same as the local\n\t address. Otherwise (no peer address assigned), we check\n\t for a broadcast address (regardless of the IFF_BROADCAST flag).\n\t And must now pass a flags value of ZEBRA_IFA_PEER to\n\t connected_add_ipv4 when a peer address is assigned.\n\t The same new logic is used with the IPv6 code as well (and we\n\t pass the new flags argument to connected_add_ipv6).\n\t (if_get_addr) Do not bother to check IFF_POINTOPOINT: just\n\t issue the SIOCGIFDSTADDR ioctl and see if we get back\n\t a peer address not matching the local address (and set\n\t the ZEBRA_IFA_PEER in that case). If there\u0027s no peer address,\n\t try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.\n\t* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl\n\t without bothering to check the IFF_POINTOPOINT flag. And if\n\t no peer address was found, just try the SIOCGLIFBRDADDR ioctl\n\t without checking the IFF_BROADCAST flag. Call connected_add_ipv4\n\t and connected_add_ipv6 with appropriate flags.\n\t* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to\n\t connected_add_ipv6.\n\t* kernel_socket.c: (ifam_read) Must pass new flags argument to\n\t connected_add_ipv6.\n\t* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2\n\t to determine local and possible peer address (so there\u0027s no longer\n\t a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.\n\t Pass new flags argument to connected_add_ipv6.\n\t (netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast\n\t to determine whether the connected destination address is a\n\t broadcast address.\n\t* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)\n\t Simplify logic by using new CONNECTED_PREFIX macro.\n\t* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,\n\t ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX\n\t macro.\n\t* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX\n\t macro, both options collapse into the same code.\n\t* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new\n\t CONNECTED_ID macro.\n\t (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX\n\t macro.\n\t* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro\n\t instead of testing the IFF_POINTOPOINT flag.\n\t* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro\n\t instead of testing with if_is_pointopoint. And add commented-out\n\t code to implement alternative (in my opinion) more elegant behavior\n\t that has no special-case treatment for PtP addresses.\n\t (ospf_network_run) Use new CONNECTED_ID macro to simplify logic.\n\t* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID\n\t macro to simplify logic.\n\t (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does\n\t not give a useful result if prefixlen is 32 (we require a peer\n\t address in such cases).\n\t* ripd.c: (rip_update_interface) Fix same bug as above.\n" }, { "commit": "d211086aefd45e0b7c113a43ed5eb620626b8681", "tree": "353b32a059c864a748d1f52f90e8a57c8adc7b6f", "parents": [ "789f78ac5a5bf1c22c9c053c883f60d45761e89b" ], "author": { "name": "paul", "email": "paul", "time": "Tue Jan 17 17:43:18 2006 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Tue Jan 17 17:43:18 2006 +0000" }, "message": "[lib/zclient] Export zclient_create_header\n\n2006-01-17 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* zclient.{c,h}: (zclient_create_header) export this, seems others\n\t could use it (in lieu of more complete zserv helpers).\n" }, { "commit": "c1b9800a60f073c7d57f6232f9af7ae39bc3353a", "tree": "94fc0006fcf73d4ab4733bef23689cb8f36772ee", "parents": [ "c77d4546619f9d3e0ccfac5acbc0ebb42658a61f" ], "author": { "name": "paul", "email": "paul", "time": "Mon Jan 16 01:54:02 2006 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Mon Jan 16 01:54:02 2006 +0000" }, "message": "[zserv] Extend Zserv header with version information and marker field\n\n2006-01-16 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* lib/zclient.h: Update the Zserv protocol header with a version\n\t field. Define the old command field to be a \u0027marker\u0027, to\n\t allow old Zserv and updated Zserv to be differentiated.\n\t Future updates will bump the version field obviously. New\n\t command field is made wider. Try to stop using the\n\t \u0027zebra_size_t\u0027 typedef in the callbacks.\n\t* lib/zclient.c: Update to read/write new format header.\n\t* zebra/zserv.c: Ditto\n" }, { "commit": "c77d4546619f9d3e0ccfac5acbc0ebb42658a61f", "tree": "007f6c4e2c85e4df115c39011aa7ad3fb379f434", "parents": [ "44316fef4d93b3d94cf45663ce35797d32acce71" ], "author": { "name": "paul", "email": "paul", "time": "Wed Jan 11 01:59:04 2006 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Wed Jan 11 01:59:04 2006 +0000" }, "message": "[zserv] Update interface flags to 8 bytes wide.\n\n2006-01-11 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* if.h: (struct interface) expand flags to 8 bytes.\n\t* zclient.c: (zebra_interface_{add,state}_read) stream read of\n\t interface flags now need to use stream_getq.\n\t (zebra_interface_if_set_value) ditto\n\n2006-01-11 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* zserv.c: (zsend_interface_{add,delete,update}) if flags are\n\t 8 bytes now, update to write out with stream_putq.\n" }, { "commit": "8cc4198f9fabe5f10f5a773de1503d82f33a01fb", "tree": "77045da709ff66629bd12029b9ee17700360909b", "parents": [ "e7fe8c88c3d552400e1ae3ae9243319ab95d6f2d" ], "author": { "name": "paul", "email": "paul", "time": "Fri May 06 21:25:49 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri May 06 21:25:49 2005 +0000" }, "message": "2005-05-06 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* (general) extern and static\u0027ification of functions in code and\n\t header.\n\t Cleanup any definitions with unspecified arguments.\n\t Add casts for callback assignments where the callback is defined,\n\t typically, as passing void *, but the function being assigned has\n\t some other pointer type defined as its argument, as gcc complains\n\t about casts from void * to X* via function arguments.\n\t Fix some old K\u0026R style function argument definitions.\n\t Add noreturn gcc attribute to some functions, as appropriate.\n\t Add unused gcc attribute to some functions (eg ones meant to help\n\t while debugging)\n\t Add guard defines to headers which were missing them.\n\t* command.c: (install_node) add const qualifier, still doesnt shut\n\t up the warning though, because of the double pointer.\n\t (cmp_node) ditto\n\t* keychain.c: (key_str2time) Add GET_LONG_RANGE() macro, derived\n\t fromn vty.h ones to fix some of the (long) \u003c 0 warnings.\n\t* thread.c: (various) use thread_empty\n\t (cpu_record_hash_key) should cast to uintptr_t, a stdint.h type\n\t* vty.h: Add VTY_GET_IPV4_ADDRESS and VTY_GET_IPV4_PREFIX so they\n\t removed from ospfd/ospf_vty.h\n\t* zebra.h: Move definition of ZEBRA_PORT to here, to remove\n\t dependence of lib on zebra/zserv.h\n" }, { "commit": "634f9ea20fce82c94407cb677b5487b65bde1973", "tree": "32db82e4ae3b0f409d6d06a0fda401f9d5df5cc9", "parents": [ "dfb9a545f8e3500e6a99518193872f526c1f56ba" ], "author": { "name": "ajs", "email": "ajs", "time": "Mon Apr 11 15:51:40 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Mon Apr 11 15:51:40 2005 +0000" }, "message": "2005-04-11 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tImplement non-blocking zclient I/O with buffering.\n\t* zclient.h (struct zclient): Add two fields to support non-blocking\n\t I/O: struct buffer *wb, and struct thread *t_write.\n\t (zclient_free): Remove function.\n\t (zebra_redistribute_send): Change 2nd arg from socket fd to\n\t struct zclient * (needed to support non-blocking I/O and buffering).\n\t (zclient_send_message): New function to send an arbitrary\n\t message with non-blocking I/O.\n\t* zclient.c (zclient_new): Create write buffer.\n\t (zclient_free): Remove unused function.\n\t (zclient_stop): Must cancel new t_write thread. Also, reset\n\t all buffers: ibuf, obuf, and wb.\n\t (zclient_failed): New helper function for typical error handling.\n\t (zclient_flush_data): New thread to flush queued data.\n\t (zclient_send_message): New function to send the message in\n\t zclient-\u003eobuf to zebra using non-blocking I/O and buffering.\n\t (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use\n\t new zclient_send_message function instead of calling writen.\n\t (zclient_start): Set socket non-blocking. Also, change 2nd arg\n\t to zebra_redistribute_send from zclient-\u003esock to zclient.\n\t (zebra_redistribute_send): Change 2nd arg to struct zclient *.\n\t Can now use zclient-\u003eobuf to assemble the message instead of\n\t allocating a temporary stream. And call zclient_send_message to\n\t send the message instead of writen.\n\t (zclient_read): Convert to support non-blocking I/O by using\n\t stream_read_try instead of deprecated stream_read.\n\t (zclient_redistribute): Change 2nd arg to zebra_redistribute_send\n\t from zclient-\u003esock to zclient.\n\t* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):\n\t Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t to zclient.\n\t* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead\n\t of writen.\n\t* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,\n\t rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send\n\t from zclient-\u003esock to zclient.\n\t* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):\n\t Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t to zclient.\n\t* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):\n\t The 2nd arg to zebra_redistribute_send is now zclient instead of\n\t zclient-\u003esock.\n\t* isis_zebra.h (isis_zebra_finish): Remove declaration of unused\n\t function.\n\t* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message\n\t to send the message to zebra instead of calling writen directly, since\n\t zclient_send_message understands non-blocking I/O and will manage\n\t the buffer queue appropriately.\n\t (isis_zebra_finish): Remove unused function, particularly since\n\t the zclient_free function has been removed.\n" }, { "commit": "a349198fd3e4e5692cdc91223f8153cb53c086ce", "tree": "e5b366a8ab7ab9ed1c9670faf1f18eef26877ade", "parents": [ "f695b01ff8e9aebc46bdf41f104ad4abbb0ef59e" ], "author": { "name": "ajs", "email": "ajs", "time": "Sat Apr 02 22:50:38 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Sat Apr 02 22:50:38 2005 +0000" }, "message": "2005-04-02 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* if.h: (if_lookup_by_name_len, if_get_by_name_len) New functions.\n\t* if.c: (if_lookup_by_name_len, if_get_by_name_len) New functions.\n\t (if_get_by_name) Tighten up code.\n\t (interface) Use new function if_get_by_name_len.\n\t* zclient.c: (zebra_interface_add_read) Use new if_get_by_name_len\n\t function.\n\t (zebra_interface_state_read) Use new if_lookup_by_name_len function.\n\t* kernel_socket.c: (ifm_read) Use new if_lookup_by_name_len function\n\t to save a memcpy.\n\t* if_ioctl_solaris.c: (interface_list_ioctl) Fix subtle bug with new\n\t if_get_by_name_len function.\n\t* ospf_interface.c: (ospf_vl_new) Use strnlen to fix call to if_create.\n" }, { "commit": "8ddca7040da413cd283a4beba4634744f4e61ac8", "tree": "b0ff51f03f511a6c882c59272dff5134bf6b360f", "parents": [ "82146b88915ca614ee1c28659478d6e310d84110" ], "author": { "name": "ajs", "email": "ajs", "time": "Tue Dec 07 18:53:52 2004 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Tue Dec 07 18:53:52 2004 +0000" }, "message": "2004-12-07 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* {smux.c,zclient.c}: Change level of debug messages to LOG_DEBUG.\n" }, { "commit": "508ec9102057c86769e5c0dd280037025102a9c0", "tree": "20524add351bf9f532e7c1812c242e565b5dc0b1", "parents": [ "6b637e9602316d98983fa103dfdbef4bbf723ffb" ], "author": { "name": "hasso", "email": "hasso", "time": "Sat Oct 23 14:26:49 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sat Oct 23 14:26:49 2004 +0000" }, "message": "Yet another breakage introduced in May with zserv cleanup.\n" }, { "commit": "3fb9cd6ef456959b6eff939d5c316f6785c2dda4", "tree": "e350cb3ef7b20b8bbccfb1aa9309152311e845bd", "parents": [ "5ae35f45f1292dce3a01f241accafeb2e59b10cc" ], "author": { "name": "hasso", "email": "hasso", "time": "Tue Oct 19 19:44:43 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Tue Oct 19 19:44:43 2004 +0000" }, "message": "OK. Here it is - PtP patch from Andrew J. Schorr. No problems with ospfd,\nripd might need some more testing though.\n" }, { "commit": "8c328f1106cf0498333c2d8a96940e7b4581e316", "tree": "9bf24cca6a68a9dd5d4dda586484e497d0c19ca6", "parents": [ "98c91ac6ac085713c00af00a6ac41779be6b50b3" ], "author": { "name": "hasso", "email": "hasso", "time": "Tue Oct 05 21:01:23 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Tue Oct 05 21:01:23 2004 +0000" }, "message": "Number of warnings is down to 3 again in lib directory. A lot of const\u0027s\nadded to strings and a lot of int -\u003e unsigned int changes.\n" }, { "commit": "18a6dce6f83dd20caf1f36c8e840868ff0bf6dbd", "tree": "ff832cbf6fe2b239bde06268820587bec671ae6d", "parents": [ "a49c0ff6771975eeb1bd7da923a9dc830200cf65" ], "author": { "name": "hasso", "email": "hasso", "time": "Sun Oct 03 18:18:34 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sun Oct 03 18:18:34 2004 +0000" }, "message": "Common router id.\n" }, { "commit": "02ff83c52592427623db0d8367ca9b3395fa321f", "tree": "0aa278809140486f55012a98616106fc995d91e6", "parents": [ "51a8798e8d36dddfdeb6b0bfd01bf32a646e8bb1" ], "author": { "name": "paul", "email": "paul", "time": "Fri Jun 11 11:27:03 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Jun 11 11:27:03 2004 +0000" }, "message": "2004-06-11 Sowmini Varadhan \u003csowmini.varadhan@sun.com\u003e\n\n * filter.c: (access_list_remark_cmd) buffer_putstr doesnt need cast\n to u_char. (ipv6_access_list_remark_cmd) ditto.\n if.c: ditto\n * network.c: (readn/writen) pointer arg should be type u_char.\n * plist.c: needs to include stream.h, not declare stream functions\n internally.\n (various) Add static qualifier to internal functions.\n (prefix_list_type_str) extraneous breaks in switch statement.\n (ip_prefix_list_description_cmd) buffer_putstr doesnt need cast\n * stream.h: depends on plist.h and export stream_put_prefix\n * vty.c: (vty_\u003ctelnet option build functions\u003e) should use\n unsigned char, telnet options are 0 -\u003e 255.\n * zclient.c: various u_char\u003c-\u003echar type cleanups.\n * zebra.h: Having to define CMSG_* can apply to more than just\n BSDI_NRL.\n * ripd.c: (rip_distribute_update_all) distribute list hook\n function pointer prototype requires struct prefix_list * arg.\n (rip_distribute_update_all_wrapper) update to pass required arg,\n NULL.\n" }, { "commit": "0a5893596774554f039222c481d235de0f35d99e", "tree": "065ba74422d21193637d6e3f8b52c0eaa09a13bf", "parents": [ "225282994d74f767058886475d80fee95d450eae" ], "author": { "name": "paul", "email": "paul", "time": "Sat May 08 11:48:26 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Sat May 08 11:48:26 2004 +0000" }, "message": "2004-05-08 Paul Jakma \u003cpaul@dishone.st\u003e\n\n * bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes\n (bgp_interface_address_delete) ditto.\n (bgp_zebra_announce) ditto.\n (bgp_zebra_withdraw) ditto.\n * isis_zebra.c: Sync with zclient changes.\n * zclient.c (zapi_ipv4_route) Follow Sowmini\u0027s lead and describe\n message format.\n * ospf6_zebra.c: Sync to zclient changes\n * ospf_zebra.c: Sync with lib/zclient changes\n * rip_zebra.c: sync with zclient changes.\n * rip_interface.c: ditto.\n * ripng_{interface,zebra}.c: sync with zclient changes\n\n\n2004-05-08 Sowmini Varadhan \u003csowmini.varadhan@sun.com\u003e\n\n * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route\n (zapi_ipv4_delete) ditto.\n (zapi_ipv4_route) add/delete a route by way of cmd arg.\n (zapi_ipv6_add) collapsed into zapi_ipv6_route.\n (zapi_ipv6_delete) ditto.\n (zapi_ipv6_route) add/delete a route by way of cmd arg.\n (zebra_interface_address_delete_read) collapsed into\n zebra_interface_address_read.\n (zebra_interface_address_delete_read) ditto.\n (zebra_interface_address_read) read address add/delete messages\n by way of type argument. Describe command message format.\n (zebra_interface_add_read) Unconditionally read new ifmtu6 field.\n Describe command message format.\n (zebra_interface_state_read) Unconditionally read new ifmtu6 field.\n (zclient_redistribute_set) Collapsed into zclient_redistribute\n (zclient_redistribute_unset) ditto\n (zclient_redistribute) set/unset redistribution.\n (zclient_redistribute_default_set) Collapsed into\n zclient_redistribute_default.\n (zclient_redistribute_default_unset) ditto.\n (zclient_redistribute_default) Redistribute default set/unset.\n * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add\n zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add\n zclient_redistribute. Ditto for\n zclient_redistribute_default_{set/unset}.\n" }, { "commit": "5de5bbf107f9eacb8d8265f8c0b925b2aed21878", "tree": "4f9c389e0f16fbbfc58b7ff2ff29aab30f8a93c6", "parents": [ "6a8da8521d35165e9a859c84605f864feb9132d7" ], "author": { "name": "gdt", "email": "gdt", "time": "Fri Feb 13 17:44:50 2004 +0000" }, "committer": { "name": "gdt", "email": "gdt", "time": "Fri Feb 13 17:44:50 2004 +0000" }, "message": "add some /* XXX assert() */ for questionable assumptions (no code\nchange - just notes to others).\n" }, { "commit": "106d2fd572c18bebe3dc44031c6d5e56e7b9030f", "tree": "df226870be1178b347947aecbe7d468022b47a91", "parents": [ "12ab19f1863e80134353244967a87805b12fe722" ], "author": { "name": "paul", "email": "paul", "time": "Fri Aug 01 00:24:13 2003 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Aug 01 00:24:13 2003 +0000" }, "message": "2003-08-01 Cougar \u003ccougar@random.ee\u003e\n\n\t* lib/if.c: (if_cmp_func) new function, compare interface names in\n\talphabetical order.\n\t(if_create) Take name as argument and add interface in sorted order.\n\t(if_get_by_name),(interface_cmd) fixup calls to if_create - see\n\tabove.\n\t(if_init) register list comparison function.\n\t* lib/if.h: Add comparison function, modify if_create prototype.\n\t* lib/zclient.c: Modify call to if_create.\n\t* ospfd/ospf_interface.c: (ospf_vl_new) modify call to if_create.\n\tchange sprintf to snprintf.\n\t* zebra/kernel_socket.c: (ifm_read) modify call to if_create.\n" }, { "commit": "592c8148981d196a7bda2f1b85a63943fd0cfdf2", "tree": "273fd4151921ffbb91cc42535083ff7e1bf04bdb", "parents": [ "bf9392c6e932080156e70c0436977fd5dbcdb0cd" ], "author": { "name": "paul", "email": "paul", "time": "Fri Jun 06 23:24:55 2003 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Jun 06 23:24:55 2003 +0000" }, "message": "2003-06-07 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* Revert Cougar\u0027s sort interface names patch, causes problems with\n\tenabling of interfaces for OSPF in ospfd.\n" }, { "commit": "a939514c59fe1a56a820e82bc59d82c721076c03", "tree": "85a2d3d1d3e0a4f35d0865778c7522b8569b40f8", "parents": [ "41908818b8f446befc3654fa5bbc98c6c0af92a3" ], "author": { "name": "hasso", "email": "hasso", "time": "Thu Jun 05 17:50:01 2003 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Thu Jun 05 17:50:01 2003 +0000" }, "message": "Patch from Cougar - sort iflist by name.\n" }, { "commit": "595db7f16506d2c82a3478e9f8dab00c8733d386", "tree": "240d477dd4b5262ba78cc50fda4b81de09e2c91c", "parents": [ "726f9b2bbdd5a607f7b0a10a64547739b807e361" ], "author": { "name": "paul", "email": "paul", "time": "Sun May 25 21:35:06 2003 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Sun May 25 21:35:06 2003 +0000" }, "message": "Add back support for null0 interface blackhole routes.\n" }, { "commit": "81dfcaa2e27d53f4eb61c549e03065dcb1b8eec3", "tree": "2aed449138a4833fe343052cdfa505be74332cb4", "parents": [ "15291357d130b804dcdcfd81bdb1b86a84567fd0" ], "author": { "name": "hasso", "email": "hasso", "time": "Sun May 25 19:21:25 2003 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sun May 25 19:21:25 2003 +0000" }, "message": "Route (reject|blackhole) support from 6Wind patch.\n" }, { "commit": "2e3b2e474ed5ba04744b167132a84f9954485af4", "tree": "cc07fb34a1bf21ead5cc3ad69e4a9dfde2b43b0e", "parents": [ "7afa08da2d3690baee1739da400775f8543f5863" ], "author": { "name": "paul", "email": "paul", "time": "Fri Dec 13 21:03:13 2002 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Dec 13 21:03:13 2002 +0000" }, "message": "zebra link state detection support\n" }, { "commit": "718e3744195351130f4ce7dbe0613f4b3e23df93", "tree": "bac2ad39971cd43f31241ef123bd4e470f695ac9", "parents": [], "author": { "name": "paul", "email": "paul", "time": "Fri Dec 13 20:15:29 2002 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Dec 13 20:15:29 2002 +0000" }, "message": "Initial revision\n" } ] }