)]}'
{
  "log": [
    {
      "commit": "8f4269ddff1becca94687252b9571b096cb45b43",
      "tree": "1fa611b63988898d448c14efa617ae8b63c6a20a",
      "parents": [
        "a6d400c9158b10207cde40a428ebf2c27f105c0a"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul@jakma.org",
        "time": "Fri Sep 18 11:50:33 2015 +0100"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Tue Sep 13 10:36:43 2016 +0100"
      },
      "message": "zebra: Add command to configure default for link-state, and make it sticky\n\n* Provide a way for the user to specify their own preference for the default\n  behaviour of link-detect, independent of the compiled in default.\n\n  Add a global \"default link-detect (on|off)\" command to zebra, to set\n  the default policy for link-detect accordingly.  The command is \"sticky\" -\n  when set it will stay set and always be written out, regardless of how it\n  compares to the baked-in, compile-time default.\n\n  The per-interface \"link-detect\" command is similarly made sticky.\n\n* zebra/interface.h: (zebra_if_linkdetect;) enum for link-detect configured\n  state.\n  (struct zebra_if_defaults) Global link-detect default\n  (struct zebra_if) Add field for per-iface link-detect default.\n* lib/if.c: (if_create_vrf) Remove the default flag setting on if-create\n  here, it\u0027s a zebra flag so do it in zebra\u0027s if_zebra_new_hook\n* zebra/interface.c: Add static storage for global defaults.\n  (if_zebra_new_hook) Set the link-detect flag on new ifaces according to the\n  baked in default or else the configured global default.\n  (config_write_zebra_if_defaults,default_linkdetect_cmd) global link-detect\n  command and config write out machinery.\n  (linkdetect_cmd) Set the configuration state rather than the flag.\n  The new hook will then set the interface flag when the if comes up.\n  (if_config_write) Write config according to configured state, not the\n  low-level flag.\n  (zebra_if_init) add new commands.\n"
    },
    {
      "commit": "ae51c9d510fb7d9cc41ead8803af916c1f4b34ca",
      "tree": "069b3a1b5d674d215a7520211e32d314d865e17f",
      "parents": [
        "7e49a4f99273858887806c6251d958e1e664bedf"
      ],
      "author": {
        "name": "Olivier Dugeon",
        "email": "olivier.dugeon@orange.com",
        "time": "Tue Apr 19 16:21:46 2016 +0200"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Tue Sep 13 10:36:38 2016 +0100"
      },
      "message": "lib: Add new if_link_params structure\n\nThis new structure is the basis to get new link parameters for\nTraffic Engineering from Zebra/interface layer to OSPFD and ISISD\nfor the support of Traffic Engineering\n\n* lib/if.[c,h]: link parameters struture and get/set functions\n* lib/command.[c,h]: creation of a new link-node\n* lib/zclient.[c,h]: modification to the ZBUS message to convey the\n  link parameters structure\n* lib/zebra.h: New ZBUS message\n* lib/memtypes.c: Add new memory type for Traffic Engineering support\n\nSigned-off-by: Olivier Dugeon \u003colivier.dugeon@orange.com\u003e\n"
    },
    {
      "commit": "921936652359fe72728eb196aa9107310f02a4d4",
      "tree": "76bfc9865bc9ee26e4f73999bcecf424dd649598",
      "parents": [
        "41de629c1fe88f9ea95d0400af6896f3c84a0dff"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Thu Jun 16 15:53:26 2016 +0100"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Tue Sep 13 10:36:36 2016 +0100"
      },
      "message": "lib: keep hash of node\u0027s commands to detect duplicate installs\n\n* command.h: (struct cmd_node) Add a hash, so duplicate installs of\n  a cmd_element to a command node can be detected.  To help catch\n  strays from the VIEW/ENABLE node consolidation particularly\n  (installs to VIEW automatically install to ENABLE too now).\n* command.c: (cmd_hash_{key,cmp}) helpers for the hash - just directly\n  on the pointer value is sufficient to catch the main problem.\n  (install_node) setup the hash for the command node.\n  (install_element) check for duplicate installs.\n  The assert on the cmd_parse_format seems misplaced.\n  (install_default_basic) separate the basic, VIEW, node default commands\n  to here.\n  (cmd_init) get rid of dupes, given consolidation.\n  (cmd_terminate) clean up the node command hash.\n\nNot done: The (struct cmd_node)\u0027s vector could be replaced with the\ncmd hash, however much of the command parser depends heavily on the\nvector and it\u0027s a lot of work to change.  A vector_lookup_value could\nalso work, particularly if vector could be backed by a hash.\n\nThe duplicate check could be disabled in releases - but useful in\ndevelopment.  It\u0027s a little extra overhead at startup.  The command\ninitialisation overhead is already something that bites in\nmicro-benchmarks - makes it easy for other implementations to show\nhow much faster they are with benchmarks where other load is low\nenough that startup time is a factor.\n"
    },
    {
      "commit": "41de629c1fe88f9ea95d0400af6896f3c84a0dff",
      "tree": "5120035dc611715809cef786d4166ec0f8023016",
      "parents": [
        "68b45cc592d5d61e748e8d99ec9f84e63aa73213"
      ],
      "author": {
        "name": "Christian Franke",
        "email": "nobody@nowhere.ws",
        "time": "Tue May 03 19:59:41 2016 +0200"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Tue Sep 13 10:36:36 2016 +0100"
      },
      "message": "lib: add api method to read current config path\n\nSigned-off-by: Christian Franke \u003cchris@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "b2a2fd788f34a4f5d1bbd92a283e47704f05ae8f",
      "tree": "60c789a8376edf88f1d0206ece1be43451c7a9cd",
      "parents": [
        "91ce87aacfd8718b5a52fb0f4453e9f72d8bdb53"
      ],
      "author": {
        "name": "Donald Sharp",
        "email": "sharpd@cumulusnetworks.com",
        "time": "Wed Dec 09 08:24:46 2015 -0500"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Fri Feb 26 14:11:47 2016 +0000"
      },
      "message": "lib: Add CMD_RANGE_STR macro to command.h\n\nAllow the auto-generation of a \"\u003cX-Y\u003e\" string for cli handline.\nWhere X or Y can be a #define.\n\nCMD_RANGE_STR(LOW, HIGH) translates to:\n\"\u003c4-99\u003e\"\n\nSigned-off-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\n"
    },
    {
      "commit": "a3fda886cdd48b6d8c421ebb1401142fa9ee93b0",
      "tree": "42a5e6fda0978185128544fd199caf8ed93e58a3",
      "parents": [
        "637035710a2f8e1e5944ee714135b7f88ac15ac4"
      ],
      "author": {
        "name": "Lou Berger",
        "email": "lberger@labn.net",
        "time": "Tue Jan 12 13:42:04 2016 -0500"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Fri Feb 26 14:11:44 2016 +0000"
      },
      "message": "bgpd, lib, vtysh: hook up bgp ENCAP CLI node\n\nSigned-off-by: Lou Berger \u003clberger@labn.net\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "13c378d96a57017f5995b2e0df46cfc31123f0e8",
      "tree": "6b4669bf22264a816ef451f3058cd8f59872eab5",
      "parents": [
        "9da04bca0e994ec92b9242159bf27d89c6743354"
      ],
      "author": {
        "name": "Lou Berger",
        "email": "lberger@labn.net",
        "time": "Tue Jan 12 13:41:56 2016 -0500"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Fri Feb 26 14:11:43 2016 +0000"
      },
      "message": "bgpd, lib, vtysh: hook up bgp VPNv6 CLI node\n\nSigned-off-by: Lou Berger \u003clberger@labn.net\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "672900382d47137638086bd8351b2678f589a546",
      "tree": "c6b482ed46f8dc8f0be79144173ccae152a3a726",
      "parents": [
        "40278bd4c51939ccf8ec06ef1f33aedf8f05e86c"
      ],
      "author": {
        "name": "Lou Berger",
        "email": "lberger@labn.net",
        "time": "Tue Jan 12 13:41:46 2016 -0500"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@hpe.com",
        "time": "Fri Feb 26 14:11:41 2016 +0000"
      },
      "message": "lib: fix bookkeeping for libreadline malloc()s\n\nWhen libreadline is used, we mistakenly mix in strdup() done in\nlibreadline with Quagga\u0027s lib/memory bookkeeping/counting, leading to\ncounter underflows on MTYPE_TMP.\n\nSigned-off-by: Lou Berger \u003clberger@labn.net\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "d8aa4beab72cdd2c2d78f9e624fd4b704eec488f",
      "tree": "b2f1db2c50ce548175240b9621df6df936cf44a6",
      "parents": [
        "7125293d65d73a451ec203c8c1630c236171f5a3"
      ],
      "author": {
        "name": "Donald Sharp",
        "email": "sharpd@cumulusnetworks.com",
        "time": "Mon Sep 28 20:10:40 2015 -0400"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Tue Oct 27 10:53:21 2015 +0000"
      },
      "message": "vtysh: Fix Quagga.conf file read in.\n\nThere exists a sequence of cli commands that are successfully read in by bgpd.conf, but\nnot by a consolidated Quagga.conf.\n\nThis issue stems from the fact that the consolidated config file attempts to match the\ncurrent node + 1 node up the tree, while the individual config file searches for matches\nall the way up the tree.\n\nQuagga.conf read-in relies on vtysh_cmd.c command parsing which puts all nodes\nat CONFIG_NODE and if a match is found CMD_SUCCESS_DAEMON is returned.  This signals to\nthe parser to call the appropriate daemon with the comamnd.\n\nbgp as an example has three levels of config node\u0027s.  If you are reading in a config node\nat the 3rd level(say address-family ipv6) then transition to another node under bgp it will\nnot work in Quagga.conf because the code only looked up one node and was at CONFIG_BGP when it failed\nto find a match.\n\nSigned-off-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\nReviewed-by: Daniel Walton \u003cdwalton@cumulusnetworks.com\u003e\n"
    },
    {
      "commit": "55cfa2f190620f7c711944637659bc208970324d",
      "tree": "13e8a607e6e552da0f4218b4a8473dbcd738845b",
      "parents": [
        "c99f3481a598e9cadd1de96714f6b5df9ad85c4a"
      ],
      "author": {
        "name": "Feng Lu",
        "email": "lu.feng@6wind.com",
        "time": "Thu Jul 03 18:24:34 2014 +0800"
      },
      "committer": {
        "name": "Nicolas Dichtel",
        "email": "nicolas.dichtel@6wind.com",
        "time": "Wed Jun 03 17:26:27 2015 +0200"
      },
      "message": "lib, vtysh: support multiple VRFs by using linux netns\n\nWe realize VRFs with linux netns by default. The main job is\nto associate a VRF with a netns. Currently this is done by\nthe configuration:\n\n  [no] vrf N netns \u003cnetns-name\u003e\n\nThis command is also available in vtysh and goes to only\nzebra, because presently only zebra supports multiple VRF.\n\nA file descriptor is added to \"struct vrf\". This is for the\nassociated netns file. Once the command \"vrf N netns NAME\"\nis executed, the specified file is opened and the file\ndescriptor is stored in the VRF N. In this way the\nassociation is formed.\n\nIn vrf_socket(), we first switch to the specified VRF by\nusing the stored file descriptor, and then can allocate\na socket which is working in the associated netns.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: Nicolas Dichtel \u003cnicolas.dichtel@6wind.com\u003e\n"
    },
    {
      "commit": "1416293f9d8f09cb792ce0ff9b734bff71697909",
      "tree": "32f87dd85aa3b0d58fb45bbef60591ee7c43dce8",
      "parents": [
        "c9c06d0d8cbc766374c43328e91b7a87f93e9c62"
      ],
      "author": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Tue May 12 17:18:04 2015 +0200"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Thu May 14 14:26:30 2015 +0200"
      },
      "message": "lib: fix \"reduce strcmp in CLI\" fallout (10bac801)\n\nIn \"lib/cli: reduce strcmp in CLI hot paths\", I failed to notice that\nCMD_VARIABLE as a boolean test covers a superset of the other types of\nvariables.  Thus, the patch broke processing of IP/IPv6/Integer range\nparameters in the CLI.\n\nFix by some reordering and introducing TERMINAL_RECORD macro (which\nmarks whether a given terminal type is a parameter) to be used in places\nwhere the check is really for all kinds of variables.\n\nReported-by: Timo Teräs \u003ctimo.teras@iki.fi\u003e\nTested-by: Martin Winter \u003cmwinter@netdef.org\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "10bac80195cf5a781da6e4415e6580fd7080f734",
      "tree": "440ed474bc54a2a5d355369e928b4bd8bc315e97",
      "parents": [
        "81b139bdd530adda045d22a4daf0054b89703dab"
      ],
      "author": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Tue May 05 11:10:20 2015 +0200"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Tue May 05 11:10:42 2015 +0200"
      },
      "message": "lib/cli: reduce strcmp in CLI hot paths\n\nEr, no idea how anyone could ever have thought that it would be a good\nidea to have a zillion of strcmp() calls in the CLI\u0027s active paths, just\nto compare against things like \"A.B.C.D\".\n\nReduces 40k prefix list load time from 1.65s to 1.23s (1.34:1).\n\nAcked-by: Paul Jakma \u003cpaul@jakma.org\u003e\n[v2: killed CMDS_* macros]\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "d8410a0242ab055b96708c5b33358916330bc85a",
      "tree": "5329d38c6e0a5be3517a476fb8a9c8ffa54213e9",
      "parents": [
        "05a49cea19d861ceec67ce6402264d353bb3b290"
      ],
      "author": {
        "name": "Everton Marques",
        "email": "everton.marques@gmail.com",
        "time": "Tue Sep 23 16:14:49 2014 -0300"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Wed Feb 04 06:08:01 2015 +0100"
      },
      "message": "pimd: Remove non-standard copyright line.\n"
    },
    {
      "commit": "871dbcfede60a8d2d286728bcbd88f27c2035b87",
      "tree": "f3188f3ab1c4856febf70647a32f6d854668aa50",
      "parents": [
        "b162ab753e70328cb6815e58b4bc5b03e9dd4f42"
      ],
      "author": {
        "name": "Everton Marques",
        "email": "everton.marques@gmail.com",
        "time": "Tue Aug 11 15:43:05 2009 -0300"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Wed Feb 04 06:07:49 2015 +0100"
      },
      "message": "[pim] Initial pim 0.155\n"
    },
    {
      "commit": "ea55500409651b0f8fd2c8a02fdbf245acc96dd8",
      "tree": "74f195200f595ae96363e007103e77654ace3f4d",
      "parents": [
        "d4a8607d12e1d3f655055647f1633ec154685545"
      ],
      "author": {
        "name": "Steve Hill",
        "email": "quagga@cheesy.sackheads.org",
        "time": "Tue Jul 28 16:36:14 2009 -0400"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Fri Sep 19 22:14:54 2014 +0100"
      },
      "message": "lib: Improve error reporting from broken config files\n\n* command.h: (config_from_file) Add variable to interface for line\n      number reporting.\n    * command.c: (config_from_file) Set \u0026 increment \u0027line_num\u0027 while parsing.\n    * vty.c: (vty_read_file) Report parse errors in the correct order to\n      stderr, with added line numbers.\n"
    },
    {
      "commit": "cd40b329a2e4da882bcad0431c048c876bbeafbd",
      "tree": "cfbdec5a7559c6d3e56766797896a18809aa1746",
      "parents": [
        "e712d0e3667ffad8109ef8bce3ce01927ee95bb7"
      ],
      "author": {
        "name": "Christian Franke",
        "email": "chris@opensourcerouting.org",
        "time": "Mon Sep 30 12:27:51 2013 +0000"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Tue Apr 01 20:21:41 2014 +0200"
      },
      "message": "lib/command.c: rewrite command matching/parsing\n\nAdd support for keyword commands.\n\nIncludes new documentation for DEFUN() in lib/command.h, for preexisting\nfeatures as well as new keyword specification.\n\nSigned-off-by: Christian Franke \u003cchris@opensourcerouting.org\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "5734509c0545ebd95a5b8e3f22a911c1a39ffa1b",
      "tree": "2f35ad50d793080db1f858c2de2228cfd2946dfd",
      "parents": [
        "fe67e668881b8b8d71b1570575c913cd287fafcf"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Sun Dec 25 17:52:09 2011 +0100"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Sun Mar 25 17:06:51 2012 +0100"
      },
      "message": "babeld: Initial import, for Babel routing protocol.\n\n* Initial import of the Babel routing protocol, ported to Quagga.\n* LICENCE: Update the original LICENCE file to include all known potentially\n  applicable copyright claims.  Ask that any future contributors to babeld/\n  grant MIT/X11 licence to their work.\n* *.{c,h}: Add GPL headers, in according with the SFLC guidance on\n  dealing with potentially mixed GPL/other licensed work, at:\n\n  https://www.softwarefreedom.org/resources/2007/gpl-non-gpl-collaboration.html\n"
    },
    {
      "commit": "228da42898c4f7bd72d9c1ee4135108e8d40d860",
      "tree": "a780ed018bfeb97c174958f188c770c74a48bad9",
      "parents": [
        "54a15182e05ca757db3bb90a4135e9f8fd3c84f2"
      ],
      "author": {
        "name": "Chris Caputo",
        "email": "ccaputo@alt.net",
        "time": "Sat Jul 18 05:44:03 2009 +0000"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Sun Jul 19 18:28:08 2009 +0100"
      },
      "message": "[bgpd] Stability fixes including bugs 397, 492\n\nI\u0027ve spent the last several weeks working on stability fixes to bgpd.\nThese patches fix all of the numerous crashes, assertion failures, memory\nleaks and memory stomping I could find.  Valgrind was used extensively.\n\nAdded new function bgp_exit() to help catch problems.  If \"debug bgp\" is\nconfigured and bgpd exits with status of 0, statistics on remaining\nlib/memory.c allocations are printed to stderr.  It is my hope that other\ndevelopers will use this to stay on top of memory issues.\n\nExample questionable exit:\n\n  bgpd: memstats: Current memory utilization in module LIB:\n  bgpd: memstats:  Link List                     :          6\n  bgpd: memstats:  Link Node                     :          5\n  bgpd: memstats:  Hash                          :          8\n  bgpd: memstats:  Hash Bucket                   :          2\n  bgpd: memstats:  Hash Index                    :          8\n  bgpd: memstats:  Work queue                    :          3\n  bgpd: memstats:  Work queue item               :          2\n  bgpd: memstats:  Work queue name string        :          3\n  bgpd: memstats: Current memory utilization in module BGP:\n  bgpd: memstats:  BGP instance                  :          1\n  bgpd: memstats:  BGP peer                      :          1\n  bgpd: memstats:  BGP peer hostname             :          1\n  bgpd: memstats:  BGP attribute                 :          1\n  bgpd: memstats:  BGP extra attributes          :          1\n  bgpd: memstats:  BGP aspath                    :          1\n  bgpd: memstats:  BGP aspath str                :          1\n  bgpd: memstats:  BGP table                     :         24\n  bgpd: memstats:  BGP node                      :          1\n  bgpd: memstats:  BGP route                     :          1\n  bgpd: memstats:  BGP synchronise               :          8\n  bgpd: memstats:  BGP Process queue             :          1\n  bgpd: memstats:  BGP node clear queue          :          1\n  bgpd: memstats: NOTE: If configuration exists, utilization may be expected.\n\nExample clean exit:\n\n  bgpd: memstats: No remaining tracked memory utilization.\n\nThis patch fixes bug #397: \"Invalid free in bgp_announce_check()\".\n\nThis patch fixes bug #492: \"SIGBUS in bgpd/bgp_route.c:\nbgp_clear_route_node()\".\n\nMy apologies for not separating out these changes into individual patches.\nThe complexity of doing so boggled what is left of my brain.  I hope this\nis all still useful to the community.\n\nThis code has been production tested, in non-route-server-client mode, on\na linux 32-bit box and a 64-bit box.\n\nRelease/reset functions, used by bgp_exit(), added to:\n\n  bgpd/bgp_attr.c,h\n  bgpd/bgp_community.c,h\n  bgpd/bgp_dump.c,h\n  bgpd/bgp_ecommunity.c,h\n  bgpd/bgp_filter.c,h\n  bgpd/bgp_nexthop.c,h\n  bgpd/bgp_route.c,h\n  lib/routemap.c,h\n\nFile by file analysis:\n\n* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.\n\n* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().\n\n* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from\n  bgp_exit().\n\n* bgpd/bgp_filter.c: Fix aslist-\u003ename use without allocation check, and\n  also fix memory leak.\n\n* bgpd/bgp_main.c: Created bgp_exit() exit routine.  This function frees\n  allocations made as part of bgpd initialization and, to some extent,\n  configuration.  If \"debug bgp\" is configured, memory stats are printed\n  as described above.\n\n* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for\n  ibuf/obuf, so bgp_scan_init() shouldn\u0027t do it too.  Also, made it so\n  zlookup is global so bgp_exit() can use it.\n\n* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()\n  adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.\n\n* bgpd/bgp_route.h: Correct reference counter \"lock\" to be signed.\n  bgp_clear_route() now accepts a bgp_clear_route_type of either\n  BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.\n\n* bgpd/bgp_route.c:\n  - bgp_process_rsclient(): attr was being zero\u0027ed and then\n    bgp_attr_extra_free() was being called with it, even though it was\n    never filled with valid data.\n\n  - bgp_process_rsclient(): Make sure rsclient-\u003egroup is not NULL before\n    use.\n\n  - bgp_processq_del(): Add call to bgp_table_unlock().\n\n  - bgp_process(): Add call to bgp_table_lock().\n\n  - bgp_update_rsclient(): memset clearing of new_attr not needed since\n    declarationw with \"\u003d { 0 }\" does it.  memset was already commented\n    out.\n\n  - bgp_update_rsclient(): Fix screwed up misleading indentation.\n\n  - bgp_withdraw_rsclient(): Fix screwed up misleading indentation.\n\n  - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.\n\n  - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also\n    free struct bgp_clear_node_queue used for work item.\n\n  - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in\n    case peer is released by peer_unlock() call.\n\n  - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.  Use\n    struct bgp_clear_node_queue to supply data to worker.  Add call to\n    bgp_table_lock().\n\n  - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or\n    BGP_CLEAR_ROUTE_MY_RSCLIENT.\n\n  - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.\n\n  Bug 397 fixes:\n\n    - bgp_default_originate()\n    - bgp_announce_table()\n\n* bgpd/bgp_table.h:\n  - struct bgp_table: Added reference count.  Changed type of owner to be\n    \"struct peer *\" rather than \"void *\".\n\n  - struct bgp_node: Correct reference counter \"lock\" to be signed.\n\n* bgpd/bgp_table.c:\n  - Added bgp_table reference counting.\n\n  - bgp_table_free(): Fixed cleanup code.  Call peer_unlock() on owner if\n    set.\n\n  - bgp_unlock_node(): Added assertion.\n\n  - bgp_node_get(): Added call to bgp_lock_node() to code path that it was\n    missing from.\n\n* bgpd/bgp_vty.c:\n  - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment\n    to owner.  Handle failure gracefully.\n\n  - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with\n    BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.\n\n* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.\n\n* bgpd/bgpd.c:\n  - peer_lock(): Allow to be called when status is \"Deleted\".\n\n  - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to\n    bgp_clear_route() call.\n\n  - peer_delete(): Common variable listnode pn.  Fix bug in which rsclient\n    was only dealt with if not part of a peer group.  Call\n    bgp_clear_route() for rsclient, if appropriate, and do so with\n    BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.\n\n  - peer_group_get(): Use XSTRDUP() instead of strdup() for conf-\u003ehost.\n\n  - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with\n    BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.\n\n  - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self-\u003ehost.\n\n  - bgp_delete(): Delete peers before groups, rather than after.  And then\n    rather than deleting rsclients, verify that there are none at this\n    point.\n\n  - bgp_unlock(): Add assertion.\n\n  - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.\n\n* lib/command.c,h: Compiler warning fixes.  Add cmd_terminate().  Fixed\n  massive leak in install_element() in which cmd_make_descvec() was being\n  called more than once for the same cmd-\u003estrvec/string/doc.\n\n* lib/log.c: Make closezlog() check fp before calling fclose().\n\n* lib/memory.c: Catch when alloc count goes negative by using signed\n  counts.  Correct #endif comment.  Add log_memstats_stderr().\n\n* lib/memory.h: Add log_memstats_stderr().\n\n* lib/thread.c: thread-\u003efuncname was being accessed in thread_call() after\n  it had been freed.  Rearranged things so that thread_call() frees\n  funcname.  Also made it so thread_master_free() cleans up cpu_record.\n\n* lib/vty.c,h: Use global command_cr.  Add vty_terminate().\n\n* lib/zclient.c,h: Re-enable zclient_free().\n"
    },
    {
      "commit": "62687ff1cd3d4460cdbd4b0fbf1e3298fe277ad2",
      "tree": "6bea5c1cf07d9d702c95fabe356fcec418b91398",
      "parents": [
        "b38309a4ee831a440ef78f8a27db584f2f8e8276"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Sat Aug 23 14:27:06 2008 +0100"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Sat Aug 23 14:27:06 2008 +0100"
      },
      "message": "[vty] Add support for a \u0027restricted mode\u0027 with anonymous vty connections\n\n\t* lib/command.h: Add a RESTRICTED_NODE, intended for use with\n\t  anonymous, \u0027no login\u0027 vtys, to provide a subset of \u0027view\u0027 mode\n\t  commands.\n\t* lib/command.c: Add RESTRICTED_NODE bits, nothing special, just\n\t  following VIEW_NODE.\n\t* lib/vty.c: (vty_auth) enable authentication should fall back to\n\t  restricted/view node as appropriate.\n\t  (vty_create) init vty\u0027s to restricted/view node as appropriate,\n\t  for the \u0027no login\u0027 case.\n\t  (vty_{no_,}restricted_mode_cmd) config commands to enable\n\t  \u0027anonymous restricted\u0027 in vty configuration.\n\t  (vty_config_write) \u0027anonymous restricted\u0027 config.\n\t  (vty_init) Install some commands to restricted mode, and the\n\t  \u0027anonymous restricted\u0027 config commands into VTY_NODE.\n\t* bgpd/*.c: Install some of the safe(r) BGP commands into\n\t  \u0027restricted mode\u0027, i.e. lookup commands of non-sensitive data.\n\t  Useful with looking-glass route-servers.\n"
    },
    {
      "commit": "7514fb7739f74311830e9ddd1381d0d228224f61",
      "tree": "4d4b9a4fdfcea4cb6fa496085327f1aae9a9a380",
      "parents": [
        "5fa05099567bbe42aae87a9bef8fd630b3666a4d"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Wed May 02 16:05:35 2007 +0000"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Wed May 02 16:05:35 2007 +0000"
      },
      "message": "[zebra] Routemap support on received routes, with \u0027set src\u0027 command (linux)\n\n2007-05-01 David L Stevens \u003cdlstevens@us.ibm.com\u003e\n\n\t* (general) These changes collectively add route-map and\n\t  prefix-list support to zebra and fix a bug in \"show\n\t  route-map\" (with no argument).\n\t* doc/main.texi: added route-map, prefix-list, ip protocol\n\t  and set src documentation\n\t* lib/command.h: added PROTOCOL_NODE type\n\t* lib/log.c: (proto_name2num) new function, protocol name to\n\t  number translation.\n\t* lib/routemap.c: (vty_show_route_map) fixed \"show route-map\"\n\t  without route-map name\n\t* lib/routemap.h: added RMAP_ZEBRA type\n\t* lib/zebra.h: added proto_name2num() prototype\n\t* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and\n\t  plist\n\t* vtysh/Makefile.am: added zebra_routemap.c\n\t* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP\n\t* zebra/connected.c: (connected_up_ipv4) added src preference argument\n\t  to rib_add_ipv4()\n\t* zebra/kernel_socket.c: (rtm_read) ditto\n\t* zebra/main.c: added prefix list initialization\n\t* zebra/Makefile.am: added zebra_routemap.c source file\n\t* zebra/rib.h: added generic address union \"g_addr\" and use in\n\t  existing places that had an explicit union.\n\t  Added \"src\" to struct nexthop.\n\t  Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4.\n\t* zebra/rt_netlink.c: (netlink_routing_table) set preferred source on\n\t  netlink messages.\n\t  (netlink_route_change) ditto\n\t  (netlink_route_multipath) ditto.\n\t* zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to\n\t  rib_add_ipv4() call.\n\t* zebra/rtread_proc.c: (proc_route_read) ditto\n\t* zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument.\n\t  (nexthop_ipv4_ifindex_add) ditto\n\t  (rib_add_ipv4) ditto\n\t  (nexthop_active_check) Add route-map processing.\n\t* zebra/zebra_routemap.c: new file for zebra route-map commands.\n\t* zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol\n\t  (vty_show_ip_route_detail) added \"src\" printing\n\t  (vty_show_ip_route) ditto\n\t  (show_ip_protocol_cmd) new command, list routemaps.\n\t  (config_write_protocol) write out routemap protocl config.\n\t  (zebra_vty_init) Install the new routemap protocol commands.\n\t* zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg\n\t  (zebra_init) init zebra route-maps.\n\t* zebra/zserv.h: add zebra_route_map_init\n"
    },
    {
      "commit": "9c42a6ebbc103a0a4be6af782388ad26e6c03556",
      "tree": "fcbdec3f26cb36539b9d66e1b8f4e63cfe1c3799",
      "parents": [
        "466c96562c6e39596dc441c30420b335f83f01ea"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Tue Jun 27 07:52:03 2006 +0000"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Tue Jun 27 07:52:03 2006 +0000"
      },
      "message": "[lib] Centralise Zserv route type information, auto-generate redist strings\n\n2006-05-23 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* route_types.txt: New file, table of ZEBRA_ROUTE definitions.\n\t* route_types.awk: New script, to parse previous and generate\n\t  (for now) redistribute string defines.\n\t* Makefile.am: build route_types.h using previous two, ala\n\t  memtypes.h, include the script and table file in EXTRA_DIST.\n\t* command.h: pull in route_types.h, add a REDIST_STR define.\n"
    },
    {
      "commit": "86228fde807f4a13313e9828b8438f18a045a6ba",
      "tree": "a601ae20a73d4a1645a40ee15a28cfe595c31aee",
      "parents": [
        "213d8dadcae5edd424ef98bf0657874a4c44faf2"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Thu Mar 30 15:00:30 2006 +0000"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Thu Mar 30 15:00:30 2006 +0000"
      },
      "message": "[lib] command.c exports host global, add it to header.\n\n2006-03-14 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* privs.c: (zprivs_caps_init) Change user IDs before lowering\n\t  privileges, while this seems to work on Linux, on Solaris\n\t  it rightfully refuses due to PRIV_PROC_SETID having been\n\t  dropped.\n\t* command.h: Add the struct host global exported from command.c\n"
    },
    {
      "commit": "6cf0cf0ca400062a03c10a92d60ec3013569a383",
      "tree": "d5a12023011770ccd6ef6b2ef8ea432c5c4f9eb3",
      "parents": [
        "15aa6a1a732eef1049dbc64d7ede9236772cafcf"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Thu Mar 30 14:43:17 2006 +0000"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Thu Mar 30 14:43:17 2006 +0000"
      },
      "message": "[lib] Mark most arguments in DEFUN_CMD_FUNC_TEXT as potentially unused\n\n2006-03-30 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* command.h: (DEFUN_CMD_FUNC_TEXT) Annotate arguments as\n\t  potentially being unused.\n"
    },
    {
      "commit": "34204aac424f8c29317d863d64f1c3bb4d241a50",
      "tree": "a7ad861d7b3454dbe96b6e7a31d7dbacc4ad24e3",
      "parents": [
        "35a60c2d3c217e3b835821a7f6ea458e2eff44cf"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Thu Nov 03 09:00:23 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Thu Nov 03 09:00:23 2005 +0000"
      },
      "message": "2005-11-03 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* zebra.h: BSD BYTE_ORDER define isn\u0027t available everywhere,\n\t  define if needs be.\n\t* checksum.h: new file. checksum.c exports in_cksum, provide\n\t  a header for it.\n\t* checksum.c: (in_cksum) callers shouldn\u0027t have to know it uses\n\t  a u_short internally, change to void *.\n\t* Makefile.am: Add checksum.h\n\t* command.h: remove bogus trailling slash.\n\t* md5.c: (general) Update it for the twentieth century. ANSI\n\t  declarations are widely supported now.. Don\u0027t include system\n\t  headers, only include zebra.h. Use POSIX types (the\n\t  alternative is to define u_int64_t in a portable way - rest\n\t  of Quagga needs same cleanup).\n\t  Make endian-conditional code be compiler conditional rather\n\t  than preprocessor conditional, so that breakage gets noticed\n\t  quicker.\n\t* md5.h: POSIX types. Get rid of the odd __P() non-ANSI capable\n\t  compiler compatibility hack.\n"
    },
    {
      "commit": "1e83659026e5b9c5876273c83e86fd229dd98c88",
      "tree": "cad15dd7ea31d3c0e18f1c0cd868168a3391e01e",
      "parents": [
        "b40d939b477a08d79dbee947aea42ac652090f85"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Mon Aug 22 22:39:56 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Mon Aug 22 22:39:56 2005 +0000"
      },
      "message": "2005-08-22 Hugo Santos \u003chsantos@av.it.pt\u003e\n\n\t* command.h: (enum node_type) Add BGP_IPV6M_NODE\n\t* command.c: (node_parent) Handle BGP_IPV6M_NODE node\n\t  (config_exit, config_end) ditto\n\t* vty.c: (vty_end_config) Handle BGP_IPV6M_NODE node\n"
    },
    {
      "commit": "8cc4198f9fabe5f10f5a773de1503d82f33a01fb",
      "tree": "77045da709ff66629bd12029b9ee17700360909b",
      "parents": [
        "e7fe8c88c3d552400e1ae3ae9243319ab95d6f2d"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri May 06 21:25:49 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri May 06 21:25:49 2005 +0000"
      },
      "message": "2005-05-06 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* (general) extern and static\u0027ification of functions in code and\n\t  header.\n\t  Cleanup any definitions with unspecified arguments.\n\t  Add casts for callback assignments where the callback is defined,\n\t  typically, as passing void *, but the function being assigned has\n\t  some other pointer type defined as its argument, as gcc complains\n\t  about casts from void * to X* via function arguments.\n\t  Fix some old K\u0026R style function argument definitions.\n\t  Add noreturn gcc attribute to some functions, as appropriate.\n\t  Add unused gcc attribute to some functions (eg ones meant to help\n\t  while debugging)\n\t  Add guard defines to headers which were missing them.\n\t* command.c: (install_node) add const qualifier, still doesnt shut\n\t  up the warning though, because of the double pointer.\n\t  (cmp_node) ditto\n\t* keychain.c: (key_str2time) Add GET_LONG_RANGE() macro, derived\n\t  fromn vty.h ones to fix some of the (long) \u003c 0 warnings.\n\t* thread.c: (various) use thread_empty\n\t  (cpu_record_hash_key) should cast to uintptr_t, a stdint.h type\n\t* vty.h: Add VTY_GET_IPV4_ADDRESS and VTY_GET_IPV4_PREFIX so they\n\t  removed from ospfd/ospf_vty.h\n\t* zebra.h: Move definition of ZEBRA_PORT to here, to remove\n\t  dependence of lib on zebra/zserv.h\n"
    },
    {
      "commit": "9c5d8562f8d24574ba1f43881d47cbc8ffc62027",
      "tree": "816690e607e208aa66b257fb9ef01ae8bd80acb6",
      "parents": [
        "b45da6f01612e8ec1938cacfe0ea0ef34ad1afca"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Tue Mar 08 15:56:42 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Tue Mar 08 15:56:42 2005 +0000"
      },
      "message": "2005-03-08 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* command.c: (cmd_describe_command_real) sign compile warning fix\n\t  (cmd_complete_command_real) ditto.\n\t  (config_list_cmd) Don\u0027t list hidden or deprecated commands,\n\t  hiding these from tab completion is still to be done.\n\t* command.h: cmd attr enum should start at 1.\n"
    },
    {
      "commit": "3b0c5d9a56560cfbfb1a8f5b9e6cc71025eb5490",
      "tree": "a4b9c7506cb74223635135902e0479fda0b46fe2",
      "parents": [
        "c3d26c72982bc95906afb58fb46f1268bc915a3b"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Tue Mar 08 10:43:43 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Tue Mar 08 10:43:43 2005 +0000"
      },
      "message": "2005-03-08 Jeroen Massar \u003cjeroen@unfix.org\u003e\n\n\t* vty.c: (vty_hello) display motd file, if set\n\t* command.h: add char *motdfile to struct host\n\t* command.c: (config_write_host) write out motdfile config\n\t  (banner_motd_file_cmd) new command, allow motd to be read from\n\t  file.\n\t  (no_banner_motd_cmd) free motdfile string, if needs be.\n\t  (cmd_init) init (struct host).motdfile. Add new motd file\n\t  commands.\n"
    },
    {
      "commit": "f6834d4c4031276361465dd19ef1918e239566c8",
      "tree": "67e9eb194ce4cef74654a888c0e165febc0010d2",
      "parents": [
        "8bfb0cba005b37c7b125fe2a34f1819e85d9f59c"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Fri Jan 28 20:28:35 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Fri Jan 28 20:28:35 2005 +0000"
      },
      "message": "2005-01-28 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* lib/command.h: Document behavior of argv_concat function.\n\t* lib/command.c: (argv_concat) Calculate total string length first so\n\t  we can call malloc just once (instead of realloc\u0027ing to add each\n\t  string element).\n\t  (do_echo,config_logmsg) Allow for possible NULL return value from\n\t  argv_concat.\n"
    },
    {
      "commit": "13bfca7a1059a73a836f4813170f296a82266211",
      "tree": "b22e29cb43472038769502685209badf3302e7dd",
      "parents": [
        "90b4214727b4e109a87bc99f9dfb4686e0c0a8b2"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Jan 23 21:42:25 2005 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Jan 23 21:42:25 2005 +0000"
      },
      "message": "        * lib/command.[ch]: Make node_parent() function nonstatic. vtyh.c will\n          use it as well.\n        * vtysh/vtysh.c: Implement walkup in node tree for vtysh as it already\n          works in vty.\n"
    },
    {
      "commit": "87d683b071dc7abfb30b666960ec480e64e19ce4",
      "tree": "ec56b3ce34f6871c4b3687681df2b97aa38da57a",
      "parents": [
        "b854038bd03e6c54b46d35bf4e40d0f39e30dfde"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Jan 16 23:31:54 2005 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Jan 16 23:31:54 2005 +0000"
      },
      "message": "\t* command.[ch], vty.c: cmd_execute_command() function must not attempt\n\t  to walk up in the node tree if called from vtysh. Different daemons\n\t  might have commands with same syntax in different nodes (for example\n\t  \"router-id x.x.x.x\" commands in zebra/ospfd/ospf6d daemons).\n\n\t* vtysh.c: Reflect changes in lib. cmd_execute_command() should know\n\t  now that it\u0027s called from vtysh and must not attempt to walk up in\n\t  the node tree.\n\n\t[pullup candidate]\n"
    },
    {
      "commit": "274a4a4447b13f89f8237156a887d05a24a73cc6",
      "tree": "d5c2c6ee94bb77ef4346bcc07834808a75210bfd",
      "parents": [
        "5e76477456ce8bc4a1eeaccb5c5e1d3d99ab1300"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Tue Dec 07 15:39:31 2004 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Tue Dec 07 15:39:31 2004 +0000"
      },
      "message": "2004-12-07 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* bgp_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* isis_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.\n\t  Note that stdout logging will no longer be enabled by default when\n\t  not running as a daemon.\n\t* ospf_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* rip_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* ripng_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* main.c: (main) The 2nd argument to openzlog has been removed.\n\t  So stdout logging will no longer be enabled by default.\n\t* irdp_main.c: (irdp_finish) Reduce severity of shutdown message\n\t  from LOG_WARNING to LOG_INFO.\n\t* vtysh.c: Make several functions static instead of global.\n\t  Added several commands to support destination-specific logging levels.\n\t  (vtysh_completion) This function is unused, so comment it out.\n\t* basic.texi: Document new logging features.  Separate basic config\n\t  commands from basic VTY commands.\n\t* log.h: Replace struct zlog flags and maskpri fields with maxlvl\n\t  array to support individual logging levels for each destination.\n\t  Remove the 2nd argument to openzlog since the default logging config\n\t  should be standardized inside the library.  Replaced the\n\t  zlog_set_flag and zlog_reset_flag functions with zlog_set_level.\n\t  And zlog_set_file now requires an additional log_level argument.\n\t  Declare zlog_proto_names for use inside command.c in the\n\t  \"show logging\" command.  Added defines useful for command\n\t  construction.\n\t* log.c: (vzlog) Decide where to send the message based on the\n\t  individual logging levels configured for each destination.\n\t  Remove support for ZLOG_STDERR since it was never actually used.\n\t  Support record-priority for terminal monitors.\n\t  (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific\n\t  logging levels.  Remove stderr support (was never used).  Added\n\t  support for terminal monitor logging.\n\t  (_zlog_assert_failed) Increase message severity to LOG_EMERG.\n\t  (openzlog) Remove 2nd argument since default config should be\n\t  standardized in library.  By default, terminal monitoring\n\t  is set to debug, and all other logging is disabled.\n\t  (zlog_set_flag,zlog_reset_flag) Removed.\n\t  (zlog_set_level) New function to replace zlog_set_flag and\n\t  zlog_reset_flag.  Supports destination-specific logging levels.\n\t  (zlog_set_file,zlog_reset_file) Support file-specific logging level.\n\t  (zlog_rotate) Log an error message if fopen fails, and support\n\t  new file-specific logging level.\n\t* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that\n\t  command functions will be static instead of global.  Remove\n\t  declarations for config_exit and config_help.  Define new macros\n\t  DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can\n\t  have deprecated commands in vtysh.  Similarly, for completeness,\n\t  define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.\n\t  Also, fix bug in ALIAS_ATTR macro (didn\u0027t matter because it\n\t  was never used).\n\t* command.c: Make many functions static instead of global.\n\t  (facility_name,facility_match,level_match) New functions\n\t  to support enhanced destination-specific logging levels.\n\t  (config_write_host) Support new destination-specific logging levels.\n\t  (config_logmsg) Added new \"logmsg\" command to help test logging\n\t  system.\n\t  (show_logging) Added \"show logging\" command to show the current\n\t  configuration of the logging system.\n\t  (config_log_stdout_level) Support explicit stdout logging level.\n\t  (no_config_log_stdout) Now takes optional LEVEL arg.\n\t  (config_log_monitor,config_log_monitor_level,no_config_log_monitor)\n\t  New commands creating new \"log monitor\" commands to set terminal\n\t  monitoring log level.\n\t  (config_log_file_level) Support explicit file logging level.\n\t  (config_log_syslog_level) Support explicit syslog logging level.\n\t  (config_log_facility,no_config_log_facility) Implement new\n\t  \"log facility\" command.\n\t  (cmd_init) Add hooks for new commands: \"show logging\", \"logmsg\",\n\t  \"log stdout \u003clevel\u003e\", \"log monitor\", \"log monitor \u003clevel\u003e\",\n\t  \"no log monitor\", \"log file \u003cfilename\u003e \u003clevel\u003e\",\n\t  \"no log file \u003cfilename\u003e \u003clevel\u003e\", \"log syslog \u003clevel\u003e\",\n\t  \"log facility\", and \"no log facility\".\n\t* vty.h: Added a \"level\" argument to vty_log so it can support\n\t  \"log record-priority\".  Declare new function vty_log_fixed for\n\t  use in signal handlers.\n\t* vty.c: (vty_log,vty_log_out) Added a \"level\" argument to support\n\t  \"log record-priority\" for vty terminal monitors.\n\t  (vty_down_level) Use config_exit_cmd.func instead of calling\n\t  config_exit directly (since command functions will now be static\n\t  instead of global).\n\t  (vty_log_fixed) New function to send terminal monitor messages\n\t  from inside a signal handler.\n"
    },
    {
      "commit": "56f2069a03a1be9bfd7605e43aa0d899b0d5ed60",
      "tree": "f039affbe88bb557260802a2913915cc8ee73f5c",
      "parents": [
        "1210fa6674e36a6acbd44e571e681842c5838501"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Fri Dec 03 17:40:31 2004 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Fri Dec 03 17:40:31 2004 +0000"
      },
      "message": "2004-12-03 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* command.h: Remove fields log_stdout and log_syslog from struct host,\n\t  since they are just trying to duplicate information in the\n\t  zlog_default structure.  Note that this fixes a bug since those\n\t  fields were not registering any logging that was established\n\t  in the initial call to openzlog (this affects only the zebra and\n\t  ospf6d daemons).  It is probably a bug to turn on any logging by\n\t  default in the call to openzlog.\n\t* command.c: (config_write_host) Get logging info from zlog_default\n\t  instead of now-removed fields host.log_stdout and host.log_syslog.\n\t  (config_log_stdout,no_config_log_stdout) Do not set now-removed field\n\t  host.log_stdout, since this info is recorded in zlog_default.\n\t  (config_log_file) Use XSTRDUP (instead of strdup) to set host.logfile.\n\t  (config_log_syslog,config_log_syslog_facility,no_config_log_syslog)\n\t  Do not set now-removed field host.log_syslog, since this info is\n\t  recorded in zlog_default.\n"
    },
    {
      "commit": "2557aed16aa98f90d70a14ad4546742c79af7668",
      "tree": "d3d6d892c9ff06653333a5bca1627da078b63930",
      "parents": [
        "48d6c69b345096425644b7796a7bc6b36bf0e974"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Nov 28 21:16:20 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Nov 28 21:16:20 2004 +0000"
      },
      "message": "DEFUN_DEPRECATED passes attribute to DEFUN as well.\n"
    },
    {
      "commit": "406d67165262a3f9443f395c7c85d8c3519309ef",
      "tree": "198c7eb16a8d70d677a23e20082a20b4a269dc69",
      "parents": [
        "ac1912327ea078f1336d54fdb1177592f94a7980"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Oct 22 12:27:44 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Oct 22 12:27:44 2004 +0000"
      },
      "message": "2004-10-22 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* command.h: Cleanup the defines a bit, add helper defines and\n\t  collapse all defines to use those. Add an attribute field to\n\t  cmd_element to support, eg hidden or deprecated commands, add\n          defun defines for such. All that\u0027s left to do is add logic\n          to command.c to check these attributes... ;)\n"
    },
    {
      "commit": "6590f2c3dc10acaa04cea3206fd00445e0a6145c",
      "tree": "6ca50941520649a19f7488a45a4ca2f9b7f84ef1",
      "parents": [
        "3fb9cd6ef456959b6eff939d5c316f6785c2dda4"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue Oct 19 20:40:08 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue Oct 19 20:40:08 2004 +0000"
      },
      "message": "Small copyright string and hostname related cleanup.\n"
    },
    {
      "commit": "42d498658d85e36a7e5910955e7425b1fa2afa69",
      "tree": "4745462eb34a84e32ef5d3e1586a3cb5a983626e",
      "parents": [
        "fd79ac918b8feaacebe9719adaac97dffb69137a"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Wed Oct 13 05:22:18 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Wed Oct 13 05:22:18 2004 +0000"
      },
      "message": "2004-10-13 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* (global) more const\u0027ification.\n\t* sockunion.c: (sockunion_su2str) buffer should be sized\n          SU_ADDRSTRLEN.\n          (sockunion_log) do not return stack variables, strdup buf before\n          return.\n        * vty.h: Fix up the VTY_GET_INTEGER macros. Testing caller supplied\n          values against ULONG_MAX is daft, when caller probably has passed\n          a type that can not hold ULONG_MAX. use a temporary long instead.\n          Add VTY_GET_LONG, make VTY_GET_INTEGER_RANGE use it, make\n\t  VTY_GET_INTEGER a define for VTY_GET_INTEGER_RANGE.\n"
    },
    {
      "commit": "a149411b85bbe74cde47d82193026b9401b29de0",
      "tree": "87e720d2fad17c0af227e3eda4db321718a7bacb",
      "parents": [
        "8552e37427c8c6f3b3f5e02e55e2a34b28604af6"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Mon Oct 11 12:53:17 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Mon Oct 11 12:53:17 2004 +0000"
      },
      "message": "Some more const string fixes.\n"
    },
    {
      "commit": "9035efaa924c69f4f4fcb1049c7dc4f43b9da980",
      "tree": "f81d25b0e069ad8fb5f2843172a4e60fa0d6cbdf",
      "parents": [
        "ddd119fd3d94e95dd44aa9fb3bc3fca4f26078a0"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sun Oct 10 11:56:56 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sun Oct 10 11:56:56 2004 +0000"
      },
      "message": "2004-10-10 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* version.h.in: (pid_output*) add const qualifier.\n\t* command.h: Change DEFUN func to take const char *[] rather\n          than char **, to begin process of fixing compile warnings in lib/.\n          Nearly all other changes in this commit follow from this change.\n        * buffer.{c,h}: (buffer_write) pointer-arithmetic is gccism, take\n          const void * and cast an automatic const char *p to it.\n          (buffer_putstr) add const\n        * command.c: (zencrypt) const qualifier\n          (cmd_execute_command_real) ditto\n          (cmd_execute_command_strict) ditto\n          (config_log_file) ditto.\n          Fix leak of getcwd() returned string.\n        * memory.{c,h}: Add MTYPE_DISTRIBUTE_IFNAME for struct dist ifname.\n        * distribute.{c,h}: Update with const qualifier.\n          (distribute_free) use MTYPE_DISTRIBUTE_IFNAME\n          (distribute_lookup) Cast to char *, note that it\u0027s ok.\n          (distribute_hash_alloc) use MTYPE_DISTRIBUTE_IFNAME.\n          (distribute_get)  Cast to char *, note that it\u0027s ok.\n        * filter.c: Update with const qualifier.\n        * if.{c,h}: ditto.\n        * if_rmap.{c,h}: ditto.\n          (if_rmap_lookup) Cast to char *, note that it\u0027s ok.\n          (if_rmap_get) ditto.\n        * log.{c,h}: Update with const qualifier.\n        * plist.{c,h}: ditto.\n        * routemap.{c,h}: ditto.\n        * smux.{c,h}: ditto. Fix some signed/unsigned comparisons.\n        * sockopt.c: (getsockopt_cmsg_data) add return for error case.\n        * vty.c: Update with const qualifier.\n"
    },
    {
      "commit": "ea8e9d972e8775f3e1c4e03fbacb18a42e8c4177",
      "tree": "0762c5ca1ae795080fb5ec9bc6cb54bffcc02748",
      "parents": [
        "e561a8eb365a77beb0dd1c4ac406f9de21543a74"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu Oct 07 21:32:14 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu Oct 07 21:32:14 2004 +0000"
      },
      "message": "Even more const strings and fix to bugfix.\n"
    },
    {
      "commit": "8c328f1106cf0498333c2d8a96940e7b4581e316",
      "tree": "9bf24cca6a68a9dd5d4dda586484e497d0c19ca6",
      "parents": [
        "98c91ac6ac085713c00af00a6ac41779be6b50b3"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue Oct 05 21:01:23 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue Oct 05 21:01:23 2004 +0000"
      },
      "message": "Number of warnings is down to 3 again in lib directory. A lot of const\u0027s\nadded to strings and a lot of int -\u003e unsigned int changes.\n"
    },
    {
      "commit": "e7168df4eff0d377621c45deb32cfcfa72e0dd83",
      "tree": "86c4017761ffd8cfdbc16223915a9f537844c4f2",
      "parents": [
        "eef1fe11b89c5ec3c035ff6e4a9acfbc5780b539"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Oct 03 20:11:32 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Oct 03 20:11:32 2004 +0000"
      },
      "message": "Big vtysh cleanup. See changelogs for details.\n"
    },
    {
      "commit": "9e867fe663c4eb43c36f35067c0dd092e8c83c14",
      "tree": "f29461b6a2dc8c38037dc0cf91e70392f9ed4ab2",
      "parents": [
        "eb5d44eb8dcf25a1b328e57d1eabb1f89e3bc59b"
      ],
      "author": {
        "name": "jardin",
        "email": "jardin",
        "time": "Tue Dec 23 08:56:18 2003 +0000"
      },
      "committer": {
        "name": "jardin",
        "email": "jardin",
        "time": "Tue Dec 23 08:56:18 2003 +0000"
      },
      "message": "Merge isisd into the Quagga\u0027s framework:\n  - add privs support\n  - use misc quagga\u0027s definitions\n  - make it compile\"able\"\n  - fix segfault cases related to hostname()\n  - add debug isis xxx command\n\nThis patch has been approved by Paul Jakma.\n"
    },
    {
      "commit": "718e3744195351130f4ce7dbe0613f4b3e23df93",
      "tree": "bac2ad39971cd43f31241ef123bd4e470f695ac9",
      "parents": [],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Dec 13 20:15:29 2002 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Dec 13 20:15:29 2002 +0000"
      },
      "message": "Initial revision\n"
    }
  ]
}