)]}'
{
  "log": [
    {
      "commit": "c99f3481a598e9cadd1de96714f6b5df9ad85c4a",
      "tree": "aac6df566f28c13fce5c9f02275f159fab73a24d",
      "parents": [
        "758fb8f99a7bfac3d31c419fd1a5694fc5f33f6a"
      ],
      "author": {
        "name": "Feng Lu",
        "email": "lu.feng@6wind.com",
        "time": "Thu Oct 16 09:52:36 2014 +0800"
      },
      "committer": {
        "name": "Nicolas Dichtel",
        "email": "nicolas.dichtel@6wind.com",
        "time": "Wed Jun 03 10:24:12 2015 +0200"
      },
      "message": "*: add VRF ID in the API message header\n\nThe API messages are used by zebra to exchange the interfaces, addresses,\nroutes and router-id information with its clients. To distinguish which\nVRF the information belongs to, a new field \"VRF ID\" is added in the\nmessage header. And hence the message version is increased to 3.\n\n* The new field \"VRF ID\" in the message header:\n\n    Length    (2 bytes)\n    Marker    (1 byte)\n    Version   (1 byte)\n    VRF ID    (2 bytes, newly added)\n    Command   (2 bytes)\n\n  - Client side:\n\n    - zclient_create_header() adds the VRF ID in the message header.\n    - zclient_read() extracts and validates the VRF ID from the header,\n      and passes the VRF ID to the callback functions registered to\n      the API messages.\n    - All relative functions are appended with a new parameter \"vrf_id\",\n      including all the callback functions.\n    - \"vrf_id\" is also added to \"struct zapi_ipv4\" and \"struct zapi_ipv6\".\n      Clients need to correctly set the VRF ID when using the API\n      functions zapi_ipv4_route() and zapi_ipv6_route().\n    - Till now all messages sent from a client have the default VRF ID\n      \"0\" in the header.\n    - The HELLO message is special, which is used as the heart-beat of\n      a client, and has no relation with VRF. The VRF ID in the HELLO\n      message header will always be 0 and ignored by zebra.\n\n  - Zebra side:\n\n    - zserv_create_header() adds the VRF ID in the message header.\n    - zebra_client_read() extracts and validates the VRF ID from the\n      header, and passes the VRF ID to the functions which process\n      the received messages.\n    - All relative functions are appended with a new parameter \"vrf_id\".\n\n* Suppress the messages in a VRF which a client does not care:\n\n  Some clients may not care about the information in the VRF X, and\n  zebra should not send the messages in the VRF X to those clients.\n\n  Extra flags are used to indicate which VRF is registered by a client,\n  and a new message ZEBRA_VRF_UNREGISTER is introduced to let a client\n  can unregister a VRF when it does not need any information in that\n  VRF.\n\n  A client sends any message other than ZEBRA_VRF_UNREGISTER in a VRF\n  will automatically register to that VRF.\n\n  - lib/vrf:\n\n    A new utility \"VRF bit-map\" is provided to manage the flags for\n    VRFs, one bit per VRF ID.\n\n    - Use vrf_bitmap_init()/vrf_bitmap_free() to initialize/free a\n      bit-map;\n    - Use vrf_bitmap_set()/vrf_bitmap_unset() to set/unset a flag\n      in the given bit-map, corresponding to the given VRF ID;\n    - Use vrf_bitmap_check() to test whether the flag, in the given\n      bit-map and for the given VRF ID, is set.\n\n  - Client side:\n\n    - In \"struct zclient\", the following flags are changed from\n      \"u_char\" to \"vrf_bitmap_t\":\n          redist[ZEBRA_ROUTE_MAX]\n          default_information\n      These flags are extended for each VRF, and controlled by the\n      clients themselves (or with the help of zclient_redistribute()\n      and zclient_redistribute_default()).\n\n  - Zebra side:\n\n    - In \"struct zserv\", the following flags are changed from\n      \"u_char\" to \"vrf_bitmap_t\":\n          redist[ZEBRA_ROUTE_MAX]\n          redist_default\n          ifinfo\n          ridinfo\n\n      These flags are extended for each VRF, as the VRF registration\n      flags. They are maintained on receiving a ZEBRA_XXX_ADD or\n      ZEBRA_XXX_DELETE message.\n\n      When sending an interface/address/route/router-id message in\n      a VRF to a client, if the corresponding VRF registration flag\n      is not set, this message will not be dropped by zebra.\n\n    - A new function zread_vrf_unregister() is introduced to process\n      the new command ZEBRA_VRF_UNREGISTER. All the VRF registration\n      flags are cleared for the requested VRF.\n\n  Those clients, who support only the default VRF, will never receive\n  a message in a non-default VRF, thanks to the filter in zebra.\n\n* New callback for the event of successful connection to zebra:\n\n  - zclient_start() is splitted, keeping only the code of connecting\n    to zebra.\n\n  - Now zclient_init()\u003d\u003ezclient_connect()\u003d\u003ezclient_start() operations\n    are purely dealing with the connection to zbera.\n\n  - Once zebra is successfully connected, at the end of zclient_start(),\n    a new callback is used to inform the client about connection.\n\n  - Till now, in the callback of connect-to-zebra event, all clients\n    send messages to zebra to request the router-id/interface/routes\n    information in the default VRF.\n\n    Of corse in future the client can do anything it wants in this\n    callback. For example, it may send requests for both default VRF\n    and some non-default VRFs.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: Nicolas Dichtel \u003cnicolas.dichtel@6wind.com\u003e\nAcked-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\n"
    },
    {
      "commit": "395828eea809e8b2b8c5824d3639cefedd7aa9f0",
      "tree": "61341d0667a67d8645455fad7029cc916eb9a3e2",
      "parents": [
        "be6335d682c5ee1b6930345193eda875705fbab2"
      ],
      "author": {
        "name": "Feng Lu",
        "email": "lu.feng@6wind.com",
        "time": "Fri May 22 11:39:55 2015 +0200"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Tue Jun 02 06:58:12 2015 +0200"
      },
      "message": "ospf6d, bgpd: avoid calling if_nametoindex\n\nAs the comments in if.h, it is better to call ifname2ifindex()\ninstead of if_nametoindex().\n\nAnd ifname2ifindex() can work for VRF by appending a parameter\nwhile if_nametoindex() can not.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: Nicolas Dichtel \u003cnicolas.dichtel@6wind.com\u003e\nAcked-by: Vincent JARDIN \u003cvincent.jardin@6wind.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "6b0655a25194c7c0331154edaa6124cf783e5e5e",
      "tree": "c0c7d479f2684531249668210da27a60322ba395",
      "parents": [
        "fdb913aedb5a9807ad60715e8badb4f25d57acea"
      ],
      "author": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Wed Jun 04 06:53:35 2014 +0200"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Wed Jun 04 06:58:02 2014 +0200"
      },
      "message": "*: nuke ^L (page feed)\n\nQuagga sources have inherited a slew of Page Feed (^L, \\xC) characters\nfrom ancient history.  Among other things, these break patchwork\u0027s\nXML-RPC API because \\xC is not a valid character in XML documents.\n\nNuke them from high orbit.\n\nPatches can be adapted simply by:\n\tsed -e \u0027s%^L%%\u0027 -i filename.patch\n(you can type page feeds in some environments with Ctrl-V Ctrl-L)\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "c19543b223d3b8463c048f346b8044589e0cce39",
      "tree": "7da71baef36e7c7b4e628c645580f8cc18c1aabe",
      "parents": [
        "1db65fadf627637621c342b789b9a3604ca5fab5"
      ],
      "author": {
        "name": "Vincent Bernat",
        "email": "bernat@luffy.cx",
        "time": "Wed Oct 24 14:45:53 2012 +0000"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Fri Mar 21 06:28:47 2014 +0100"
      },
      "message": "ospf6d: compute interface cost from its bandwidth\n\nPreviously, the interface cost was a fixed default value that a user\nwas allowed to change with \"ipv6 ospf6 cost XX\". As what is done with\nOSPFv2, we change this behaviour to compute the default interface cost\nfrom the interface bandwidth.\n\nThe user can still force a cost with \"ipv6 ospf6 cost XX\". He can get\nthe default value with \"no ipv6 ospf6 cost\". Moreover, the default\ncost value was 1. The cost is now computed from the bandwidth and a\ndefault reference bandwidth of 100 MBps (as for OSPFv2). Since the\ndefault bandwidth for an interface is 10 MBps, the \"default\" cost\nbecomes 10 instead of 1.\n\n[DL: resolved conflict in ospf6d/ospf6_interface.c]\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "b13c1d9299d6426f48f074545f3e403e5a9b8a61",
      "tree": "b313288f60c8d76a16e4f9f1796e934c0c8fefc0",
      "parents": [
        "d9628728e0924ae13ef6e8f8a67a2c9802745184"
      ],
      "author": {
        "name": "Christian Franke",
        "email": "chris@opensourcerouting.org",
        "time": "Thu Dec 13 16:11:16 2012 +0100"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Tue Mar 18 08:45:20 2014 +0100"
      },
      "message": "ospf6d: handle missing link local address more gracefully\n\nospf6 can\u0027t run on an interface without a link local address.\nDon\u0027t start the state machine when an interface comes up without\nsuch an ip and bring it up later, when a usable link local\naddress is added.\n\nSigned-off-by: Christian Franke \u003cchris@opensourcerouting.org\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "d9628728e0924ae13ef6e8f8a67a2c9802745184",
      "tree": "af4cee6c7018580655cb53a0900471128cc0a8bb",
      "parents": [
        "37531a7ec380554b18c004bcae9f5a070385d132"
      ],
      "author": {
        "name": "Christian Franke",
        "email": "chris@opensourcerouting.org",
        "time": "Fri Mar 08 21:47:35 2013 +0100"
      },
      "committer": {
        "name": "David Lamparter",
        "email": "equinox@opensourcerouting.org",
        "time": "Tue Mar 18 08:44:05 2014 +0100"
      },
      "message": "ospf6d: improve ordered shutdown\n\nImprove the _disable/_enable infrastructure so it gets into\na more usable shape and make \u0027no router ospf6\u0027 actually work.\n\nSigned-off-by: Christian Franke \u003cchris@opensourcerouting.org\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n"
    },
    {
      "commit": "b4e45f67057be22133b6bec88cdf285d5c8214db",
      "tree": "80f775047efb255ef573b2e9d3affb1a7caeb6d1",
      "parents": [
        "6eac79a6fed4842e00607c00c445213b51bba377"
      ],
      "author": {
        "name": "Denis Ovsienko",
        "email": "infrastation@yandex.ru",
        "time": "Mon Dec 05 16:35:14 2011 +0400"
      },
      "committer": {
        "name": "Denis Ovsienko",
        "email": "infrastation@yandex.ru",
        "time": "Mon Jan 23 14:31:42 2012 +0400"
      },
      "message": "fix zebra protocol after MP-BGP changes\n\nThe previous commits modified both zebra and bgpd for additional\nSAFI field, but not any other routing daemon, which led to zebra\ndaemon crashing with failed assertion.\n"
    },
    {
      "commit": "57c4f4f45b7a3c327f274272afe43893e10008e1",
      "tree": "cbf84ef77631ac75e4f34d9b037663ced9ba5ef6",
      "parents": [
        "604a9b43dd68a087ca5a4ac2cae19eb17591ba5f"
      ],
      "author": {
        "name": "Ingo Flaschberger",
        "email": "if@xip.at",
        "time": "Mon Apr 04 11:17:45 2011 +0100"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Mon Apr 04 11:17:45 2011 +0100"
      },
      "message": "ospf6d: fix crash if zebra_interface_state_read can\u0027t find interface\n\n* ospf6_zebra.c: (ospf6_zebra_if_state_update) zebra_interface_state_read\n  may return NULL, if it can\u0027t find an interface, deal with it.\n"
    },
    {
      "commit": "30d205909c5a81cc306b161c16abff0fd7f566a7",
      "tree": "6f7532a4336cf601bbeab07d2669639a05409dfd",
      "parents": [
        "d023aec49f70156d2ed894a8fba65bcfa221ff02"
      ],
      "author": {
        "name": "Stephen Hemminger",
        "email": "shemminger@vyatta.com",
        "time": "Tue Jul 28 11:58:51 2009 +0100"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Tue Jul 28 11:58:51 2009 +0100"
      },
      "message": "[global] interface flags format warnings\n\n*/*: ifp-\u003eflags is 64 bit unsigned which can not be handled by %l on 32\n     bit architectures - requires %ll and the appropriate cast.\n"
    },
    {
      "commit": "7fc626de5f618133ad2a478d13defa3a110b89ea",
      "tree": "432ff0e4672eabc2ec6b0dcffc22dcc0aee532c8",
      "parents": [
        "66e5cd87194ae6fdd51061a91b4698bc0a652f6b"
      ],
      "author": {
        "name": "Stephen Hemminger",
        "email": "stephen.hemminger@vyatta.com",
        "time": "Mon Dec 01 11:10:34 2008 -0800"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Fri Jun 12 17:10:29 2009 +0100"
      },
      "message": "[cleanup] Make command nodes static\n\nThe cmd_nodes used to configure vty, can mostly be static so\n(basic data hiding 101).\n"
    },
    {
      "commit": "6ac29a51075def99217a4ab1015635db3b3e83ed",
      "tree": "1152b55eb3a2099c67a0ba8e62d7e41f07e00135",
      "parents": [
        "1423c809cc4ddc2e013ba6264c49a11e5719c6f2"
      ],
      "author": {
        "name": "Paul Jakma",
        "email": "paul.jakma@sun.com",
        "time": "Fri Aug 15 13:45:30 2008 +0100"
      },
      "committer": {
        "name": "Paul Jakma",
        "email": "paul@quagga.net",
        "time": "Fri Aug 22 19:52:58 2008 +0100"
      },
      "message": "[trivia] finish off static\u0027ification of ospf6d and ripngd\n\n2008-08-15 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* {ospf6d,ripngd}/*: Finish job of marking functions as static, or\n\t  exporting declarations for them, to quell warning noise with\n\t  Quagga\u0027s GCC default high-level of warning flags. Thus allowing\n\t  remaining, more useful warnings to be more easily seen.\n"
    },
    {
      "commit": "f52d13cb2e8e7197934d5f241f88647f9b9d78b8",
      "tree": "b0aa01befc07f57ed47e83ac7dfb383284c49d26",
      "parents": [
        "c05612b9a702d0f49c379c92deb6daab55372aea"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Oct 01 17:38:06 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Oct 01 17:38:06 2005 +0000"
      },
      "message": "2005-10-01 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* zebra.h: Declare new functions zebra_route_string() and\n\t  zebra_route_char().\n\t* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New\n\t  functions to map zebra route numbers to strings.\n\t* zebra_vty.c: (route_type_str) Remove obsolete function: use new\n\t  library function zebra_route_string() instead.  Note that there\n\t  are a few differences: for IPv6 routes, we now get \"ripng\" and\n\t  \"ospf6\" instead of the old behavior (\"rip\" and \"ospf\").\n\t  (route_type_char) Remove obsolete function: ues new library function\n\t  zebra_route_char() instead.  Note that there is one difference:\n\t  the old function returned \u0027S\u0027 for a ZEBRA_ROUTE_SYSTEM route,\n\t  whereas the new one returns \u0027X\u0027.\n\t  (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace\n\t  route_type_str() with zebra_route_string().\n\t  (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()\n\t  with zebra_route_char().\n\t* bgp_vty.c: (bgp_config_write_redistribute) Use new library function\n\t  zebra_route_string instead of a local hard-coded table.\n\t* ospf6_asbr.c: Remove local hard-coded tables zroute_name and\n\t  zroute_abname. Change the ZROUTE_NAME macro to use new library\n\t  function zebra_route_string().  Remove the ZROUTE_ABNAME macro.\n\t  (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with\n\t  a call to zebra_route_char(), and be sure to fix the format string,\n\t  since we now have a char instead of a char *.\n\t* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and\n\t  zebra_route_abname.  Note that the zebra_route_name[] table\n\t  contained mixed-case strings, whereas the zebra_route_string()\n\t  function returns lower-case strings.\n\t  (ospf6_zebra_read_ipv6): Change debug message to use new library\n\t  function zebra_route_string() instead of zebra_route_name[].\n\t  (show_zebra): Use new library function zebra_route_string() instead\n\t  of zebra_route_name[].\n\t* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.\n\t  (ospf_redist_string) New function implemented using new library\n\t  function zebra_route_string().  Note that there are a few differences\n\t  in the output that will result: the new function returns strings\n\t  that are lower-case, whereas the old table was mixed case.  Also,\n\t  the old table mapped ZEBRA_ROUTE_OSPF6 to \"OSPFv3\", whereas the\n\t  new function returns \"ospf6\".\n\t* ospfd.h: Remove extern struct message ospf_redistributed_proto[],\n\t  and add extern const char *ospf_redist_string(u_int route_type)\n\t  instead.\n\t* ospf_asbr.c: (ospf_external_info_add) In two messages, use\n\t  ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).\n\t* ospf_vty.c: Remove local hard-coded table distribute_str.\n\t  (config_write_ospf_redistribute,config_write_ospf_distribute): Use\n\t  new library function zebra_route_string() instead of distribute_str[].\n\t* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,\n\t  ospf_redistribute_default_set,ospf_redistribute_check)\n\t  In debug messages, use ospf_redist_string() instead of\n\t  LOOKUP(ospf_redistributed_proto).\n\t* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded\n\t  table str[]. Replace str[] with calls to new library function\n\t  zebra_route_string().\n\t* ripd.c: Remove local hard-coded table route_info[].\n\t  (show_ip_rip) Replace uses of str[] with calls to new library\n\t  functions zebra_route_char and zebra_route_string.\n\t* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded\n\t  table str[].  Replace str[i] with new library function\n\t  zebra_route_string(i).\n\t* ripngd.c: Remove local hard-coded table route_info[].\n\t  (show_ipv6_ripng) Use new library function zebra_route_char() instead\n\t  of table route_info[].\n"
    },
    {
      "commit": "634f9ea20fce82c94407cb677b5487b65bde1973",
      "tree": "32db82e4ae3b0f409d6d06a0fda401f9d5df5cc9",
      "parents": [
        "dfb9a545f8e3500e6a99518193872f526c1f56ba"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Mon Apr 11 15:51:40 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Mon Apr 11 15:51:40 2005 +0000"
      },
      "message": "2005-04-11 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tImplement non-blocking zclient I/O with buffering.\n\t* zclient.h (struct zclient): Add two fields to support non-blocking\n\t  I/O: struct buffer *wb, and struct thread *t_write.\n\t  (zclient_free): Remove function.\n\t  (zebra_redistribute_send): Change 2nd arg from socket fd to\n\t  struct zclient * (needed to support non-blocking I/O and buffering).\n\t  (zclient_send_message): New function to send an arbitrary\n\t  message with non-blocking I/O.\n\t* zclient.c (zclient_new): Create write buffer.\n\t  (zclient_free): Remove unused function.\n\t  (zclient_stop): Must cancel new t_write thread.  Also, reset\n\t  all buffers: ibuf, obuf, and wb.\n\t  (zclient_failed): New helper function for typical error handling.\n\t  (zclient_flush_data): New thread to flush queued data.\n\t  (zclient_send_message): New function to send the message in\n\t  zclient-\u003eobuf to zebra using non-blocking I/O and buffering.\n\t  (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use\n\t  new zclient_send_message function instead of calling writen.\n\t  (zclient_start): Set socket non-blocking.  Also, change 2nd arg\n\t  to zebra_redistribute_send from zclient-\u003esock to zclient.\n\t  (zebra_redistribute_send): Change 2nd arg to struct zclient *.\n\t  Can now use zclient-\u003eobuf to assemble the message instead of\n\t  allocating a temporary stream.  And call zclient_send_message to\n\t  send the message instead of writen.\n\t  (zclient_read): Convert to support non-blocking I/O by using\n\t  stream_read_try instead of deprecated stream_read.\n\t  (zclient_redistribute): Change 2nd arg to zebra_redistribute_send\n\t  from zclient-\u003esock to zclient.\n\t* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):\n\t  Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t  to zclient.\n\t* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead\n\t  of writen.\n\t* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,\n\t  rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send\n\t  from zclient-\u003esock to zclient.\n\t* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):\n\t  Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t  to zclient.\n\t* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):\n\t  The 2nd arg to zebra_redistribute_send is now zclient instead of\n\t  zclient-\u003esock.\n\t* isis_zebra.h (isis_zebra_finish): Remove declaration of unused\n\t  function.\n\t* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message\n\t  to send the message to zebra instead of calling writen directly, since\n\t  zclient_send_message understands non-blocking I/O and will manage\n\t  the buffer queue appropriately.\n\t  (isis_zebra_finish): Remove unused function, particularly since\n\t  the zclient_free function has been removed.\n"
    },
    {
      "commit": "d2fc88962a9a494ecb34167871bb9e7273a25d33",
      "tree": "304a1c1a744972bc10b1f677a134907c404b361d",
      "parents": [
        "386e61502d391adb985ac1487825349ec85e6a8c"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Apr 02 18:38:43 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Apr 02 18:38:43 2005 +0000"
      },
      "message": "2005-04-02 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tFix problems when netlink interfaces are renamed (same ifindex used\n\tfor a new interface).  Start cleaning up some problems with the way\n\tinterface names are handled.\n\t* interface.c: (if_new_intern_ifindex) Remove obsolete function.\n\t  (if_delete_update) After distributing the interface deletion message,\n\t  set ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t  (if_dump_vty) Detect pseudo interface by checking if ifp-\u003eifindex is\n\t  IFINDEX_INTERNAL.\n\t  (zebra_interface) Check return code from interface_cmd.func.\n\t  Do not set internal ifindex values to if_new_intern_ifindex(),\n\t  since we now use IFINDEX_INTERNAL for all pseudo interfaces.\n\t* kernel_socket.c: (ifm_read) Fix code and comments to reflect that\n\t  all internal interfaces now have ifp-\u003eifindex set to IFINDEX_INTERNAL.\n        * rt_netlink.c: (set_ifindex) New function used to update ifp-\u003eifindex.\n\t  Detects interface rename events by checking if that ifindex is already\n\t  being used.  If it is, delete the old interface before assigning\n\t  the ifindex to the new interface.\n\t  (netlink_interface, netlink_link_change) Call set_ifindex to update\n\t  the ifindex.\n\t* if.h: Remove define for IFINDEX_INTERNBASE and add define\n\t  IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-\n\t  interfaces should have ifindex set to 0.\n\t  (if_new) Remove function.\n\t  (if_delete_retain) New function to delete an interface without\n\t  removing from iflist and freeing the structure.\n\t  (ifname2ifindex) New function.\n\t* if.c: (if_new) Remove function (absorb into if_create).\n\t  (if_create) Replace function if_new with call to calloc.\n\t  Set ifp-\u003eifindex to IFINDEX_INTERNAL.  Fix off-by-one error\n\t  in assert to check length of interface name.  Add error message\n\t  if interface with this name already exists.\n\t  (if_delete_retain) New function to delete an interface without\n\t  removing from iflist and freeing the structure.\n\t  (if_delete) Implement with help of if_delete_retain.\n\t  (ifindex2ifname) Reimplement using if_lookup_by_index.\n\t  (ifname2ifindex) New function to complement ifindex2ifname.\n\t  (interface) The interface command should check the name length\n\t  and fail with a warning message if it is too long.\n\t  (no_interface) Fix spelling in warning message.\n\t  (if_nametoindex) Reimplement using if_lookup_by_name.\n\t  (if_indextoname, ifaddr_ipv4_lookup) Reimplement using\n\t  if_lookup_by_index.\n\t* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp-\u003eifindex\n\t  to IFINDEX_INTERNAL.\n\t* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead\n\t  of if_delete, since it is generally not safe to remove interface\n\t  structures.  After deleting, set ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t  (zebra_interface_if_lookup) Tighten up code.\n\t* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function\n\t  was commented out.  But this is not safe: we should at least update\n\t  the ifindex when the interface is deleted.  So the new version\n\t  updates the interface status and sets ifp-\u003eifindex to\n\t  IFINDEX_INTERNAL.\n\t  (ospf6_zebra_route_update) Use if_indextoname properly.\n\t* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface\n\t  flags to help with debugging.\n\t* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp-\u003eifindex\n\t  to IFINDEX_INTERNAL.\n\t  (zebra_interface_if_lookup) Make function static.  Tighten up code.\n\t* rip_interface.c: (rip_interface_delete) After deleting, set\n\t  ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t* ripng_interface.c: (ripng_interface_delete) After deleting, set\n\t  ifp-\u003eifindex to IFINDEX_INTERNAL.\n"
    },
    {
      "commit": "c1ba9e8a8ac0447e6f33d50b4b9e7a1e68307bf1",
      "tree": "cff477f00b68f3fe7db18cfa384aac90825c96ab",
      "parents": [
        "719e97414a7ca1a4d49d72816b9e1bd2155d157d"
      ],
      "author": {
        "name": "jardin",
        "email": "jardin",
        "time": "Wed Mar 02 22:43:26 2005 +0000"
      },
      "committer": {
        "name": "jardin",
        "email": "jardin",
        "time": "Wed Mar 02 22:43:26 2005 +0000"
      },
      "message": "Fix segfault when ospf6_create() is not called yet.\nThanks to Mohit Thakur.\n"
    },
    {
      "commit": "c6487d61a9b7766f69718edbc484a6ad989bdef4",
      "tree": "2a896a8ebdd6e41edcd1b5917ce9dddefbb335fe",
      "parents": [
        "529d65b3db6a2a79cbdf9ca3a1aa915ce5776286"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Dec 24 06:00:11 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Dec 24 06:00:11 2004 +0000"
      },
      "message": "*.c: Change level of debug messages to LOG_DEBUG.\n"
    },
    {
      "commit": "6099b3b56956322567323c11fd698b2328c6826b",
      "tree": "fa537bd0eaa9f7d824f39445eabc928db59050ca",
      "parents": [
        "ae5e24d8678f1e3a60dde58d3382c5ba73d6bb27"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Nov 20 02:06:59 2004 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Nov 20 02:06:59 2004 +0000"
      },
      "message": "2004-11-19 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* global: Replace strerror with safe_strerror.  And vtysh/vtysh.c\n\t  needs to include \"log.h\" to pick up the declaration.\n"
    },
    {
      "commit": "18a6dce6f83dd20caf1f36c8e840868ff0bf6dbd",
      "tree": "ff832cbf6fe2b239bde06268820587bec671ae6d",
      "parents": [
        "a49c0ff6771975eeb1bd7da923a9dc830200cf65"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Oct 03 18:18:34 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Oct 03 18:18:34 2004 +0000"
      },
      "message": "Common router id.\n"
    },
    {
      "commit": "f3f27f60fdfc81fce2944ee89087417b04935663",
      "tree": "4f65dbb37fca42d7f293b8c2e7154aa845bb30cc",
      "parents": [
        "9b29eb75f618ff9896d4ee65ad3cb24eb2f2d02e"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Sep 10 18:07:57 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Sep 10 18:07:57 2004 +0000"
      },
      "message": "Add IS-IS info into array.\n"
    },
    {
      "commit": "049207c31d9b5da023c6c2e3689b771010098f94",
      "tree": "08dd51fe72c455f869b83372e4a6aa1346389426",
      "parents": [
        "4f4795e83fb4ddcc0d19322478e9cc422a60c7c4"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Aug 04 20:02:13 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Aug 04 20:02:13 2004 +0000"
      },
      "message": "SVN revision 907 from Zebra cvs repository.\n"
    },
    {
      "commit": "1203e1c07c444df615605168c72852389e20340c",
      "tree": "2b00b78fe71fc2840837c0ffdb1c308192ceedf4",
      "parents": [
        "b219dea8d67b58db58755f94ea7cb44aa9774f0d"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Jul 23 21:34:27 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Jul 23 21:34:27 2004 +0000"
      },
      "message": "Use ifp-\u003emtu6 in ospf6d and ripngd.\n"
    },
    {
      "commit": "508e53e2eef3eefba4c1aa771529027fd4486ea8",
      "tree": "0e25e1b344a7b8e2c4551cfcb74d5a011dd0865d",
      "parents": [
        "6708fa3c3e6aef369be13f3915698f407107cae2"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue May 18 18:57:06 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue May 18 18:57:06 2004 +0000"
      },
      "message": "Ospf6d merge from Zebra repository with added privs stuff and merged\nzclient changes.\n"
    },
    {
      "commit": "0a5893596774554f039222c481d235de0f35d99e",
      "tree": "065ba74422d21193637d6e3f8b52c0eaa09a13bf",
      "parents": [
        "225282994d74f767058886475d80fee95d450eae"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sat May 08 11:48:26 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sat May 08 11:48:26 2004 +0000"
      },
      "message": "2004-05-08 Paul Jakma \u003cpaul@dishone.st\u003e\n\n       * bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes\n         (bgp_interface_address_delete) ditto.\n         (bgp_zebra_announce) ditto.\n         (bgp_zebra_withdraw) ditto.\n       * isis_zebra.c: Sync with zclient changes.\n       * zclient.c (zapi_ipv4_route) Follow Sowmini\u0027s lead and describe\n         message format.\n       * ospf6_zebra.c: Sync to zclient changes\n       * ospf_zebra.c: Sync with lib/zclient changes\n       * rip_zebra.c: sync with zclient changes.\n       * rip_interface.c: ditto.\n       * ripng_{interface,zebra}.c: sync with zclient changes\n\n\n2004-05-08 Sowmini Varadhan \u003csowmini.varadhan@sun.com\u003e\n\n       * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route\n         (zapi_ipv4_delete) ditto.\n         (zapi_ipv4_route) add/delete a route by way of cmd arg.\n         (zapi_ipv6_add) collapsed into zapi_ipv6_route.\n         (zapi_ipv6_delete) ditto.\n         (zapi_ipv6_route) add/delete a route by way of cmd arg.\n         (zebra_interface_address_delete_read) collapsed into\n         zebra_interface_address_read.\n         (zebra_interface_address_delete_read) ditto.\n         (zebra_interface_address_read) read address add/delete messages\n         by way of type argument. Describe command message format.\n         (zebra_interface_add_read) Unconditionally read new ifmtu6 field.\n         Describe command message format.\n         (zebra_interface_state_read) Unconditionally read new ifmtu6 field.\n         (zclient_redistribute_set) Collapsed into zclient_redistribute\n         (zclient_redistribute_unset) ditto\n         (zclient_redistribute) set/unset redistribution.\n         (zclient_redistribute_default_set) Collapsed into\n         zclient_redistribute_default.\n         (zclient_redistribute_default_unset) ditto.\n         (zclient_redistribute_default) Redistribute default set/unset.\n       * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add\n         zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add\n         zclient_redistribute. Ditto for\n         zclient_redistribute_default_{set/unset}.\n"
    },
    {
      "commit": "733e8102dc513a49363c73597fbf9d3fe061acd5",
      "tree": "b2c8adab27a48f8b56a3164ded397ef527afb4e9",
      "parents": [
        "551a8979254b5fc797765d18b4c678fb7419e702"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sun May 18 15:26:26 2003 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sun May 18 15:26:26 2003 +0000"
      },
      "message": "From: Hasso Tepper \u003chasso@estpak.ee\u003e\nSubject: [zebra 19093] [PATCH] Two more fixes\n\n1) From 6Wind patch - show router and interface nodes from ospf6d when\nusing vtysh and don\u0027t show defaults in interface node. Fixes bugzilla\n#14.\n"
    },
    {
      "commit": "718e3744195351130f4ce7dbe0613f4b3e23df93",
      "tree": "bac2ad39971cd43f31241ef123bd4e470f695ac9",
      "parents": [],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Dec 13 20:15:29 2002 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Dec 13 20:15:29 2002 +0000"
      },
      "message": "Initial revision\n"
    }
  ]
}