)]}'
{
  "log": [
    {
      "commit": "f69bd9da8b1f7e0f297d4ffb370552fc41af3c81",
      "tree": "02352cf7c23e0f6feca56b39de18a11c66bea84b",
      "parents": [
        "a4e987e0b0b264bd3898f567cb7efec9b155d740"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jun 03 18:01:50 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jun 03 18:01:50 2005 +0000"
      },
      "message": "2005-06-03 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c: (rip_create_socket) Make it static.\n\t  Remove the getservbyname stuff, as RFC2453 3.9.2 says non-RIP\n\t  port messages should be discarded, quagga doesnt accept them,\n\t  no need to lookup port.\n\t  Take a \u0027to\u0027 argument, if socket should be bound to something else.\n\t  setsockopt_so_recvbuf might need privs, move it to the raised\n\t  privileges section.\n\t  dont forget to close the socket if bind fails.\n\t  (rip_send_packet) use strncpy, just in case (address is under\n\t  our control anyway, but still).\n\t  dont duplicate rip_create_socket - just use it.\n\t  (rip_create) rip_create_socket takes an argument now, modify.\n"
    },
    {
      "commit": "a4e987e0b0b264bd3898f567cb7efec9b155d740",
      "tree": "42ec82321bcabe0829090710206556155dd89db9",
      "parents": [
        "a6570ee42f9d3a597c33b73931da5294b43b71ba"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jun 03 17:46:49 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jun 03 17:46:49 2005 +0000"
      },
      "message": "2005-06-03 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c: (rip_create_socket) move it up so rip_send_packet\n\t  can use it too.\n"
    },
    {
      "commit": "7755a8c28388f7583c184fc1dcdd6225d75553bf",
      "tree": "522039e13af4a901525438e007130f3583f6a214",
      "parents": [
        "7e440869b51dde1da44f6ffc26643838a1e2b36d"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Thu Jun 02 08:20:53 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Thu Jun 02 08:20:53 2005 +0000"
      },
      "message": "2005-06-01 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* rip_interface.c: Fix authentication, no-auth impossible to specify\n\t  (rip_interface_new) default to RIP_NO_AUTH\n\t  (rip_interface_reset) ditto\n\t  (rip_interface_config_write) write out config for simple\n"
    },
    {
      "commit": "0cb8a01c38284a5a3f4ee4b017b69cd5f3e39f9a",
      "tree": "c3630492d44c8a9f45eed668e960d644f322f595",
      "parents": [
        "033e861222f07d68697aa883d9391a30c3e011c6"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sun May 29 11:27:24 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sun May 29 11:27:24 2005 +0000"
      },
      "message": "2005-05-29 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* ripd.c: (rip_output_process) fix error which crept in my\n\t  previous rip auth untanglement commit - it had become impossible\n\t  to not have authentication (even for v1).\n"
    },
    {
      "commit": "033e861222f07d68697aa883d9391a30c3e011c6",
      "tree": "e21f614e529e61e4de6ed8c3d64cae12ed20c9c2",
      "parents": [
        "70601e0691e178ca23f14fdc666a97efce26897f"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sat May 28 04:50:54 2005 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sat May 28 04:50:54 2005 +0000"
      },
      "message": "Sync bgpd and ripd set_metric_addsub_cmd commands. Fixes bugzilla #192.\n[backport candidate]\n"
    },
    {
      "commit": "dc625e86063125f8ecaaa1502c3cf53f44d76eff",
      "tree": "243a52620109d888335b26cf8fdf98052b62e801",
      "parents": [
        "cf96db1cef3e039f3a87c0bc36206b882e804949"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu May 26 06:26:40 2005 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu May 26 06:26:40 2005 +0000"
      },
      "message": "\t* rip_routemap.c: In case of \u00270.0.0.0\u0027 used as \u0027nexthop\u0027, use sender\n\t  address as nexthop in routemap.\n\n\tFixes bugzilla #186. [backport candidate]\n"
    },
    {
      "commit": "cf96db1cef3e039f3a87c0bc36206b882e804949",
      "tree": "10c9cb9bae5772bdfb340ae263b59a3d4deb3ce4",
      "parents": [
        "b5f29603399070041289729e175fbec085e8e904"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed May 25 21:15:32 2005 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed May 25 21:15:32 2005 +0000"
      },
      "message": "\t* rip_routemap.c: Make \"match interface\" routemap command match both -\n\t  in and out interfaces.\n\n\tFixes bugzilla #185. [backport candidate]\n"
    },
    {
      "commit": "d4e47287efd60f77b473f8d5677e4dac08c192b0",
      "tree": "06dfe25619e4cee9601a92b07b7a61625c0f6c4a",
      "parents": [
        "42c981994adcf7fb2e1c2bea170cc5f196d5a1d7"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Wed May 11 15:56:21 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Wed May 11 15:56:21 2005 +0000"
      },
      "message": "2005-05-11 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* rip_interface.c (rip_interface_add): Need to call\n\t  rip_passive_interface_apply (was already calling it in\n\t  rip_interface_up).\n\n\t[backport candidate]\n"
    },
    {
      "commit": "634f9ea20fce82c94407cb677b5487b65bde1973",
      "tree": "32db82e4ae3b0f409d6d06a0fda401f9d5df5cc9",
      "parents": [
        "dfb9a545f8e3500e6a99518193872f526c1f56ba"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Mon Apr 11 15:51:40 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Mon Apr 11 15:51:40 2005 +0000"
      },
      "message": "2005-04-11 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tImplement non-blocking zclient I/O with buffering.\n\t* zclient.h (struct zclient): Add two fields to support non-blocking\n\t  I/O: struct buffer *wb, and struct thread *t_write.\n\t  (zclient_free): Remove function.\n\t  (zebra_redistribute_send): Change 2nd arg from socket fd to\n\t  struct zclient * (needed to support non-blocking I/O and buffering).\n\t  (zclient_send_message): New function to send an arbitrary\n\t  message with non-blocking I/O.\n\t* zclient.c (zclient_new): Create write buffer.\n\t  (zclient_free): Remove unused function.\n\t  (zclient_stop): Must cancel new t_write thread.  Also, reset\n\t  all buffers: ibuf, obuf, and wb.\n\t  (zclient_failed): New helper function for typical error handling.\n\t  (zclient_flush_data): New thread to flush queued data.\n\t  (zclient_send_message): New function to send the message in\n\t  zclient-\u003eobuf to zebra using non-blocking I/O and buffering.\n\t  (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use\n\t  new zclient_send_message function instead of calling writen.\n\t  (zclient_start): Set socket non-blocking.  Also, change 2nd arg\n\t  to zebra_redistribute_send from zclient-\u003esock to zclient.\n\t  (zebra_redistribute_send): Change 2nd arg to struct zclient *.\n\t  Can now use zclient-\u003eobuf to assemble the message instead of\n\t  allocating a temporary stream.  And call zclient_send_message to\n\t  send the message instead of writen.\n\t  (zclient_read): Convert to support non-blocking I/O by using\n\t  stream_read_try instead of deprecated stream_read.\n\t  (zclient_redistribute): Change 2nd arg to zebra_redistribute_send\n\t  from zclient-\u003esock to zclient.\n\t* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):\n\t  Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t  to zclient.\n\t* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead\n\t  of writen.\n\t* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,\n\t  rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send\n\t  from zclient-\u003esock to zclient.\n\t* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):\n\t  Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t  to zclient.\n\t* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):\n\t  The 2nd arg to zebra_redistribute_send is now zclient instead of\n\t  zclient-\u003esock.\n\t* isis_zebra.h (isis_zebra_finish): Remove declaration of unused\n\t  function.\n\t* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message\n\t  to send the message to zebra instead of calling writen directly, since\n\t  zclient_send_message understands non-blocking I/O and will manage\n\t  the buffer queue appropriately.\n\t  (isis_zebra_finish): Remove unused function, particularly since\n\t  the zclient_free function has been removed.\n"
    },
    {
      "commit": "d2fc88962a9a494ecb34167871bb9e7273a25d33",
      "tree": "304a1c1a744972bc10b1f677a134907c404b361d",
      "parents": [
        "386e61502d391adb985ac1487825349ec85e6a8c"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Apr 02 18:38:43 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Apr 02 18:38:43 2005 +0000"
      },
      "message": "2005-04-02 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tFix problems when netlink interfaces are renamed (same ifindex used\n\tfor a new interface).  Start cleaning up some problems with the way\n\tinterface names are handled.\n\t* interface.c: (if_new_intern_ifindex) Remove obsolete function.\n\t  (if_delete_update) After distributing the interface deletion message,\n\t  set ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t  (if_dump_vty) Detect pseudo interface by checking if ifp-\u003eifindex is\n\t  IFINDEX_INTERNAL.\n\t  (zebra_interface) Check return code from interface_cmd.func.\n\t  Do not set internal ifindex values to if_new_intern_ifindex(),\n\t  since we now use IFINDEX_INTERNAL for all pseudo interfaces.\n\t* kernel_socket.c: (ifm_read) Fix code and comments to reflect that\n\t  all internal interfaces now have ifp-\u003eifindex set to IFINDEX_INTERNAL.\n        * rt_netlink.c: (set_ifindex) New function used to update ifp-\u003eifindex.\n\t  Detects interface rename events by checking if that ifindex is already\n\t  being used.  If it is, delete the old interface before assigning\n\t  the ifindex to the new interface.\n\t  (netlink_interface, netlink_link_change) Call set_ifindex to update\n\t  the ifindex.\n\t* if.h: Remove define for IFINDEX_INTERNBASE and add define\n\t  IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-\n\t  interfaces should have ifindex set to 0.\n\t  (if_new) Remove function.\n\t  (if_delete_retain) New function to delete an interface without\n\t  removing from iflist and freeing the structure.\n\t  (ifname2ifindex) New function.\n\t* if.c: (if_new) Remove function (absorb into if_create).\n\t  (if_create) Replace function if_new with call to calloc.\n\t  Set ifp-\u003eifindex to IFINDEX_INTERNAL.  Fix off-by-one error\n\t  in assert to check length of interface name.  Add error message\n\t  if interface with this name already exists.\n\t  (if_delete_retain) New function to delete an interface without\n\t  removing from iflist and freeing the structure.\n\t  (if_delete) Implement with help of if_delete_retain.\n\t  (ifindex2ifname) Reimplement using if_lookup_by_index.\n\t  (ifname2ifindex) New function to complement ifindex2ifname.\n\t  (interface) The interface command should check the name length\n\t  and fail with a warning message if it is too long.\n\t  (no_interface) Fix spelling in warning message.\n\t  (if_nametoindex) Reimplement using if_lookup_by_name.\n\t  (if_indextoname, ifaddr_ipv4_lookup) Reimplement using\n\t  if_lookup_by_index.\n\t* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp-\u003eifindex\n\t  to IFINDEX_INTERNAL.\n\t* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead\n\t  of if_delete, since it is generally not safe to remove interface\n\t  structures.  After deleting, set ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t  (zebra_interface_if_lookup) Tighten up code.\n\t* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function\n\t  was commented out.  But this is not safe: we should at least update\n\t  the ifindex when the interface is deleted.  So the new version\n\t  updates the interface status and sets ifp-\u003eifindex to\n\t  IFINDEX_INTERNAL.\n\t  (ospf6_zebra_route_update) Use if_indextoname properly.\n\t* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface\n\t  flags to help with debugging.\n\t* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp-\u003eifindex\n\t  to IFINDEX_INTERNAL.\n\t  (zebra_interface_if_lookup) Make function static.  Tighten up code.\n\t* rip_interface.c: (rip_interface_delete) After deleting, set\n\t  ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t* ripng_interface.c: (ripng_interface_delete) After deleting, set\n\t  ifp-\u003eifindex to IFINDEX_INTERNAL.\n"
    },
    {
      "commit": "b14ee00b7f23f216b5f159e88de915b8755b97d6",
      "tree": "9ca5e20d7ddb00d1e2c40f3ed0f2a68c3b0ba876",
      "parents": [
        "c4c7d0c48b1219d7ed9ed1377cea1be239c45d5d"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Feb 04 23:42:41 2005 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Feb 04 23:42:41 2005 +0000"
      },
      "message": "2005-02-04 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* ripd.c: Untangle the construction of RIP auth data.\n\t  (rip_auth_prepare_str_send) new helper function, prepare\n\t  correct key string.\n\t  (rip_auth_simple_write) new helper, write out the\n\t  rip simple password auth psuedo-RTE.\n\t  (rip_auth_md5_ah_write) new helper, write out the\n\t  MD5 auth-header psuedo-RTE.\n\t  (rip_auth_header_write) new helper, write out correct\n\t  auth header data / psuedo-RTE.\n\t  (rip_auth_md5_set) rip out the memmove and writing of the\n\t  auth header psuedo-RTE. So that all that is left is to\n\t  write the trailing auth digest, and update digest offset\n\t  field in the original header.\n\t  (rip_write_rte) rip out writing of RIP header, writing of\n\t  simple auth data psuedo-RTE. Make it do what its name suggests,\n\t  write out actual RTEs.\n\t  (rip_output_process) remove the incorrect additional decrements\n\t  of rtemax. Prepare the auth_str, which simple or MD5 auth will\n\t  need. Move write out of RIP header and auth data to inside the\n\t  loop. Adjust paramaters as required.\n"
    },
    {
      "commit": "6a52d0d155fc8b892e30cdb5e3fbe4c2779bd4cd",
      "tree": "d4bfab8286e497e30c5ebfed099c317a9397c623",
      "parents": [
        "656b4eeec1fb30402ad2001976c05c6f44fafb34"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sun Jan 30 18:49:28 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sun Jan 30 18:49:28 2005 +0000"
      },
      "message": "2005-01-30 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* daemon.c: (daemon) Replace perror with zlog_err.\n\t* vty.c: (vty_serv_un) Replace perror with zlog_err.\n\t* ripd.c: (rip_create_socket) Replace perror with zlog_err.\n\t* ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with\n\t  zlog_err.\n\t* ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with\n\t  zlog_err.\n"
    },
    {
      "commit": "798534576c2525476141628ac14ecc83fd775a5a",
      "tree": "c5166d696b314ee41961198340b61dd1062af3ec",
      "parents": [
        "0b7d97d293af645d98bc9b196b228d674b2aa344"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sun Jan 30 17:40:29 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sun Jan 30 17:40:29 2005 +0000"
      },
      "message": "2005-01-30 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* ripd.c: (rip_create_socket) Save errno before calling\n\t  ripd_privs.change.\n"
    },
    {
      "commit": "b99760ab51abf8c4c9a1f89dab0c1630a6768ff7",
      "tree": "daaf8cabb567c5ff1a01368fa1382d8257b56854",
      "parents": [
        "73a7dea305b146febb8e57176295689d6a900f1d"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Tue Jan 04 16:24:43 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Tue Jan 04 16:24:43 2005 +0000"
      },
      "message": "2005-01-04 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* configure.ac: Added test for broken CMSG_FIRSTHDR macro\n\t  (relevant for Solaris 8 and unpatched Solaris 9, don\u0027t know\n\t  whether other platforms are affected).\n\t* zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether\n\t  config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined\n\t  by the configure test program).\n\t* sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead\n\t  of CMSG_FIRSTHDR.\n\t* rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR\n\t  instead of CMSG_FIRSTHDR.\n\t* ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.\n\t* ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of\n\t  CMSG_FIRSTHDR.\n"
    },
    {
      "commit": "766a0ca3dcb824fc9283be89bb57e47132b26826",
      "tree": "f8600196fb61cbbcbc090dad480830ce0ffe24fb",
      "parents": [
        "3aa8d5f9893c182eb27f0f6ab354a77edbf1b9f0"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Wed Dec 15 14:55:51 2004 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Wed Dec 15 14:55:51 2004 +0000"
      },
      "message": "2004-12-15 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* ripd.c: (rip_read) Improve 2 error messages to show the source of\n\t  the packet when the lookup fails.\n"
    },
    {
      "commit": "5d6c37798317cece827dca7f4b539fa0387b5eb9",
      "tree": "c09349025c5549b316a2de264bc3f9b2de4b7de2",
      "parents": [
        "9b0e25c07763181e73d41d8816762a8aeeb2ad37"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Wed Dec 08 19:24:06 2004 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Wed Dec 08 19:24:06 2004 +0000"
      },
      "message": "2004-12-08 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* *.c: Change level of debug messages to LOG_DEBUG.\n"
    },
    {
      "commit": "274a4a4447b13f89f8237156a887d05a24a73cc6",
      "tree": "d5c2c6ee94bb77ef4346bcc07834808a75210bfd",
      "parents": [
        "5e76477456ce8bc4a1eeaccb5c5e1d3d99ab1300"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Tue Dec 07 15:39:31 2004 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Tue Dec 07 15:39:31 2004 +0000"
      },
      "message": "2004-12-07 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* bgp_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* isis_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.\n\t  Note that stdout logging will no longer be enabled by default when\n\t  not running as a daemon.\n\t* ospf_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* rip_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* ripng_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* main.c: (main) The 2nd argument to openzlog has been removed.\n\t  So stdout logging will no longer be enabled by default.\n\t* irdp_main.c: (irdp_finish) Reduce severity of shutdown message\n\t  from LOG_WARNING to LOG_INFO.\n\t* vtysh.c: Make several functions static instead of global.\n\t  Added several commands to support destination-specific logging levels.\n\t  (vtysh_completion) This function is unused, so comment it out.\n\t* basic.texi: Document new logging features.  Separate basic config\n\t  commands from basic VTY commands.\n\t* log.h: Replace struct zlog flags and maskpri fields with maxlvl\n\t  array to support individual logging levels for each destination.\n\t  Remove the 2nd argument to openzlog since the default logging config\n\t  should be standardized inside the library.  Replaced the\n\t  zlog_set_flag and zlog_reset_flag functions with zlog_set_level.\n\t  And zlog_set_file now requires an additional log_level argument.\n\t  Declare zlog_proto_names for use inside command.c in the\n\t  \"show logging\" command.  Added defines useful for command\n\t  construction.\n\t* log.c: (vzlog) Decide where to send the message based on the\n\t  individual logging levels configured for each destination.\n\t  Remove support for ZLOG_STDERR since it was never actually used.\n\t  Support record-priority for terminal monitors.\n\t  (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific\n\t  logging levels.  Remove stderr support (was never used).  Added\n\t  support for terminal monitor logging.\n\t  (_zlog_assert_failed) Increase message severity to LOG_EMERG.\n\t  (openzlog) Remove 2nd argument since default config should be\n\t  standardized in library.  By default, terminal monitoring\n\t  is set to debug, and all other logging is disabled.\n\t  (zlog_set_flag,zlog_reset_flag) Removed.\n\t  (zlog_set_level) New function to replace zlog_set_flag and\n\t  zlog_reset_flag.  Supports destination-specific logging levels.\n\t  (zlog_set_file,zlog_reset_file) Support file-specific logging level.\n\t  (zlog_rotate) Log an error message if fopen fails, and support\n\t  new file-specific logging level.\n\t* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that\n\t  command functions will be static instead of global.  Remove\n\t  declarations for config_exit and config_help.  Define new macros\n\t  DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can\n\t  have deprecated commands in vtysh.  Similarly, for completeness,\n\t  define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.\n\t  Also, fix bug in ALIAS_ATTR macro (didn\u0027t matter because it\n\t  was never used).\n\t* command.c: Make many functions static instead of global.\n\t  (facility_name,facility_match,level_match) New functions\n\t  to support enhanced destination-specific logging levels.\n\t  (config_write_host) Support new destination-specific logging levels.\n\t  (config_logmsg) Added new \"logmsg\" command to help test logging\n\t  system.\n\t  (show_logging) Added \"show logging\" command to show the current\n\t  configuration of the logging system.\n\t  (config_log_stdout_level) Support explicit stdout logging level.\n\t  (no_config_log_stdout) Now takes optional LEVEL arg.\n\t  (config_log_monitor,config_log_monitor_level,no_config_log_monitor)\n\t  New commands creating new \"log monitor\" commands to set terminal\n\t  monitoring log level.\n\t  (config_log_file_level) Support explicit file logging level.\n\t  (config_log_syslog_level) Support explicit syslog logging level.\n\t  (config_log_facility,no_config_log_facility) Implement new\n\t  \"log facility\" command.\n\t  (cmd_init) Add hooks for new commands: \"show logging\", \"logmsg\",\n\t  \"log stdout \u003clevel\u003e\", \"log monitor\", \"log monitor \u003clevel\u003e\",\n\t  \"no log monitor\", \"log file \u003cfilename\u003e \u003clevel\u003e\",\n\t  \"no log file \u003cfilename\u003e \u003clevel\u003e\", \"log syslog \u003clevel\u003e\",\n\t  \"log facility\", and \"no log facility\".\n\t* vty.h: Added a \"level\" argument to vty_log so it can support\n\t  \"log record-priority\".  Declare new function vty_log_fixed for\n\t  use in signal handlers.\n\t* vty.c: (vty_log,vty_log_out) Added a \"level\" argument to support\n\t  \"log record-priority\" for vty terminal monitors.\n\t  (vty_down_level) Use config_exit_cmd.func instead of calling\n\t  config_exit directly (since command functions will now be static\n\t  instead of global).\n\t  (vty_log_fixed) New function to send terminal monitor messages\n\t  from inside a signal handler.\n"
    },
    {
      "commit": "887c44a4f3d8219dc5b1c52b5dcde1f31d52b73d",
      "tree": "5c0ef5fe1d3948c56e6abf2ffd3c9811e92f0f2e",
      "parents": [
        "bec595ada58ebfa98ad49220f29ab28b58549094"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Fri Dec 03 16:36:46 2004 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Fri Dec 03 16:36:46 2004 +0000"
      },
      "message": "2004-12-03 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* bgp_main.c: (sigint) Use zlog_notice for termination message.\n\t  (main) Use zlog_notice for startup announcement.\n\t* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.\n\t  (terminate) This function should be static, not global.\n\t  (main) Use zlog_notice for startup announcement, and remove\n\t  ifdef ZEBRA_VERSION.\n\t* version.h.in: Remove declaration for pid_output_lock, this function\n\t  is now static, not global.\n\t* pid_output.c: (pid_output_lock) This function should be static, not\n\t  global.  And remove \"old umask\" error message, since it was really\n\t  an unimportant debug message, not an error.\n\t  (pid_output) Need to declare static function pid_output_lock.\n\t* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination\n\t  message.\n\t  (main) Remove commented-out call to pid_output_lock (which should\n\t  never be called other than from inside pid_output).  And use\n\t  zlog_notice to print the startup message, which now includes\n\t  the vty port.\n\t* ospf_main.c: (sigint) Use zlog_notice for termination message.\n\t  (main) Issue a startup announcement using zlog_notice.\n\t* rip_main.c: (sigint) Use zlog_notice for termination message.\n\t  (main) Add a startup announcement using zlog_notice.\n\t* ripng_main.c: (sighup) Remove spurious terminating message.\n\t  (sigint) Use zlog_notice for termination message.\n\t  (main) Issue a startup announcement using zlog_notice.\n\t* main.c: (sigint) Use zlog_notice for termination message.\n\t  (main) Add a startup announcement using zlog_notice.\n"
    },
    {
      "commit": "c065230a4c617a1cdf8813dd25384bcc9591f61a",
      "tree": "42285fe5604e43ada3b53ac9a77ba1e3c4464b52",
      "parents": [
        "accb156b9b1c3f4b46ab01f8850200f450fc40d8"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu Nov 25 19:33:48 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu Nov 25 19:33:48 2004 +0000"
      },
      "message": "Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.\n"
    },
    {
      "commit": "c49ad8f1b0775c1b35ea9bf75f44f3eca105d786",
      "tree": "6ec708b6c39ca83707395d656e74a52c2eed7ade",
      "parents": [
        "6b6942f93625c073db645a5546fbaaf7e7b2c628"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Oct 22 10:27:28 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Oct 22 10:27:28 2004 +0000"
      },
      "message": "2004-10-22 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* ripd.c: Collapse redundant passing of various address structs,\n          struct interface and struct connected as arguments to functions\n          down to two key arguments, namely struct connected and, possibly,\n          address of source/destination. Testing for RIPv1 would be useful.\n          (rip_read) lookup struct connected for the received packet, pass\n          it on.\n        * rip_interface.c: With previous changes, we no longer have to tread\n          carefully with struct connected, as it will always be there and\n          valid.\n"
    },
    {
      "commit": "3fb9cd6ef456959b6eff939d5c316f6785c2dda4",
      "tree": "e350cb3ef7b20b8bbccfb1aa9309152311e845bd",
      "parents": [
        "5ae35f45f1292dce3a01f241accafeb2e59b10cc"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue Oct 19 19:44:43 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue Oct 19 19:44:43 2004 +0000"
      },
      "message": "OK. Here it is - PtP patch from Andrew J. Schorr. No problems with ospfd,\nripd might need some more testing though.\n"
    },
    {
      "commit": "c75105ab6e6eeac0b013eab186c97641984f68cc",
      "tree": "ea221df06e957de7e83f379c9b45f578762736e7",
      "parents": [
        "d68614db1dc36a6814fee33f584417b1441a83e4"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Oct 13 10:33:26 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Oct 13 10:33:26 2004 +0000"
      },
      "message": "Make initializing smux connection configurable - \"smux peer OID\" command\ninitializes connection, and \"no smux peer\" command terminates it. Fixes\nbugzilla #47 and #112.\n"
    },
    {
      "commit": "98b718a9d2aa7a3324c553944e26914fe090b87a",
      "tree": "13a7002a3265a2debfa411a2a2c544dbde972f0a",
      "parents": [
        "a149411b85bbe74cde47d82193026b9401b29de0"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Mon Oct 11 12:57:57 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Mon Oct 11 12:57:57 2004 +0000"
      },
      "message": "Sync with changes in lib. Make more strings const.\n"
    },
    {
      "commit": "8a676be30c275bcbe1a3de08c0c942a606caef2e",
      "tree": "c2202db7df836073b542e49c5f579062ee8b6d57",
      "parents": [
        "7a1d583c02253c53605f310d1afcc9f1c8e15b7b"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Oct 08 06:36:38 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Oct 08 06:36:38 2004 +0000"
      },
      "message": "There is no warnings here any more.\n"
    },
    {
      "commit": "1af8193311192ec1bd2a4d2769e0e9b90bc1609f",
      "tree": "39b136c0cbc64dd6a39651ce21c5c93384bec50f",
      "parents": [
        "c9e52be3f4d98943b67fbbe5d9a7ccd823b88326"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Sep 26 16:11:14 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Sep 26 16:11:14 2004 +0000"
      },
      "message": "Fix compiler warning.\n"
    },
    {
      "commit": "52dc7ee65f8d887b0730abc0a5d44d27fc6ecafd",
      "tree": "a557339540c56dd3953c29a50ca0e48c1911efc8",
      "parents": [
        "44983cf8a9c587dfbcad294b9dfe4dccbb68ba98"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu Sep 23 19:18:23 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu Sep 23 19:18:23 2004 +0000"
      },
      "message": "Remove usage of evil list and listnode typedefs.\n"
    },
    {
      "commit": "0b3acf4f94241905ff36df5c1d9f9f389e45d191",
      "tree": "48b312ab2de446208d966d234fc37539bed98861",
      "parents": [
        "bf731011ef7038f5766432fec862301c123d4736"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Sep 17 08:39:08 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Sep 17 08:39:08 2004 +0000"
      },
      "message": "2004-09-17 Paul Jakma \u003cpaul@dishone.st\u003e\n\n        * ripngd/ripngd.c: move setsockopt_so_recvbuf to lib.\n        * lib/sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd.\n        * ripd/ripd.c: set receive buffer to a decent size, some systems\n          have low defaults. Problem noted and fix suggested by Stephan\n          Schweizer in [zebra 20967].\n"
    },
    {
      "commit": "1a51786a70c45003813ffc60874653555a9b486a",
      "tree": "07cd52dd929569decb8bb487f85cedda99e0358b",
      "parents": [
        "b63cef7c41e2ea92836a2c4570dc34b06c4c5ab7"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Thu Aug 19 04:03:08 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Thu Aug 19 04:03:08 2004 +0000"
      },
      "message": "2004-08-19 Paul Jakma \u003cpaul@dishone.st\u003e\n\n        * rip_interface.c: (rip_interface_multicast_set) get rid\n          of extraneous if_pointopoint arg. ifp is accessible via connected.\n          pass connected-\u003eifp-\u003eifindex to setsockopt_multicast_ipv4.\n        * ripd.c: (rip_send_packet) update call to\n          rip_interface_multicast_set\n        * ripd.h: update rip_interface_multicast_set prototype\n"
    },
    {
      "commit": "02ff83c52592427623db0d8367ca9b3395fa321f",
      "tree": "0aa278809140486f55012a98616106fc995d91e6",
      "parents": [
        "51a8798e8d36dddfdeb6b0bfd01bf32a646e8bb1"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jun 11 11:27:03 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jun 11 11:27:03 2004 +0000"
      },
      "message": "2004-06-11 Sowmini Varadhan \u003csowmini.varadhan@sun.com\u003e\n\n        * filter.c: (access_list_remark_cmd) buffer_putstr doesnt need cast\n          to u_char. (ipv6_access_list_remark_cmd) ditto.\n          if.c: ditto\n        * network.c: (readn/writen) pointer arg should be type u_char.\n        * plist.c: needs to include stream.h, not declare stream functions\n          internally.\n          (various) Add static qualifier to internal functions.\n          (prefix_list_type_str) extraneous breaks in switch statement.\n          (ip_prefix_list_description_cmd) buffer_putstr doesnt need cast\n        * stream.h: depends on plist.h and export stream_put_prefix\n        * vty.c: (vty_\u003ctelnet option build functions\u003e) should use\n          unsigned char, telnet options are 0 -\u003e 255.\n        * zclient.c: various u_char\u003c-\u003echar type cleanups.\n        * zebra.h: Having to define CMSG_* can apply to more than just\n          BSDI_NRL.\n        * ripd.c: (rip_distribute_update_all) distribute list hook\n          function pointer prototype requires struct prefix_list * arg.\n          (rip_distribute_update_all_wrapper) update to pass required arg,\n          NULL.\n"
    },
    {
      "commit": "ca5e516c84cc2d35b6f6cd29f8ba9e835d3b72ba",
      "tree": "b0d6c52545e9aeb2e187c6a2c72e296f69deaf9f",
      "parents": [
        "d47b7ba10bdd17d9f723a5fc42b2f71668e27a22"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sun Jun 06 22:06:33 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sun Jun 06 22:06:33 2004 +0000"
      },
      "message": "2004-06-06 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.h: Add define for the RIPv2 Authentication Data family\n\t  Move the auth type defines up to where other defines live.\n\t  Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible\n\t  md5-\u003eauth_len size. Add md5_auth_len field to struct\n          rip_interface: (rip_interface_new) Init md5_auth_len to compatible\n          size.\n          (ip_rip_authentication_mode_cmd) Extended to handle setting\n          md5 auth-length. Appropriate aliases added.\n          (no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to\n          compatible size.\n          (rip_interface_config_write) Teach it about md5_auth_len.\n          _always_ write out the auth-length, so that everyone will get\n          the setting in their config file, and hence allow for a future\n          change of default for md5_auth_len to be less painful - every md5\n          user will have this setting in their config file.\n          ripd.c: (rip_packet_dump) Change nasty hard coded constants to\n          symbolic defines. Change various tests of \u0027ntoh.(variable) \u003d\u003d\n          constant\u0027 to test \u0027variable \u003d\u003d ntoh.(constant)\u0027. Clean up\n          indentation on some long lines.\n          (rip_auth_simple_password) ditto.\n          (rip_auth_md5) ditto, also add length argument and sanity check\n          md5 data offset field. Sanity check md5 auth length, accept RFC\n          or old-ripd/cisco lengths.\n          (rip_auth_md5_set) as per (rip_packet_dump), also write out\n          the configured md5 auth length for the interface (old-ripd or rfc)\n          (rip_read) as per (rip_packet_dump)\n          (rip_write_rte) ditto\n          (rip_response_process) ditto\n          (rip_write_rte) ditto\n"
    },
    {
      "commit": "c2bfbcc38428b53e856617e1da8bbe9f8d2ee2fa",
      "tree": "87be849d9b8f29dbccff5df5e0f747c6b702b9b7",
      "parents": [
        "0c2be26c735870c28ec7985ca1d24d96ae63ae45"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jun 04 01:42:38 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jun 04 01:42:38 2004 +0000"
      },
      "message": "2004-06-04 JJ Ludman \u003cjacques.ludman@sun.com\u003e\n\n        * ripd.c: Interoperability fix. Correct value for MD5 auth length\n          is 16. Accept packets with this set to \u003e\u003d 16, and set to 16\n          ourselves.\n"
    },
    {
      "commit": "11dde9c2f03d3f3e0b2226378d70b7e3b9b219b2",
      "tree": "ffa7674ee1ede1b6e39b586d313b8f305b8f1098",
      "parents": [
        "152f4a80026262c0a87bea408410b5a534f3f80e"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Mon May 31 14:00:00 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Mon May 31 14:00:00 2004 +0000"
      },
      "message": "2004-05-31 Sowmini Varadhan \u003csowmini.varadhan@sun.com\u003e\n\n        * ripd.c: Fixup compile warnings\n        * rip_routemap.c: Ditto\n"
    },
    {
      "commit": "0a5893596774554f039222c481d235de0f35d99e",
      "tree": "065ba74422d21193637d6e3f8b52c0eaa09a13bf",
      "parents": [
        "225282994d74f767058886475d80fee95d450eae"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sat May 08 11:48:26 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sat May 08 11:48:26 2004 +0000"
      },
      "message": "2004-05-08 Paul Jakma \u003cpaul@dishone.st\u003e\n\n       * bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes\n         (bgp_interface_address_delete) ditto.\n         (bgp_zebra_announce) ditto.\n         (bgp_zebra_withdraw) ditto.\n       * isis_zebra.c: Sync with zclient changes.\n       * zclient.c (zapi_ipv4_route) Follow Sowmini\u0027s lead and describe\n         message format.\n       * ospf6_zebra.c: Sync to zclient changes\n       * ospf_zebra.c: Sync with lib/zclient changes\n       * rip_zebra.c: sync with zclient changes.\n       * rip_interface.c: ditto.\n       * ripng_{interface,zebra}.c: sync with zclient changes\n\n\n2004-05-08 Sowmini Varadhan \u003csowmini.varadhan@sun.com\u003e\n\n       * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route\n         (zapi_ipv4_delete) ditto.\n         (zapi_ipv4_route) add/delete a route by way of cmd arg.\n         (zapi_ipv6_add) collapsed into zapi_ipv6_route.\n         (zapi_ipv6_delete) ditto.\n         (zapi_ipv6_route) add/delete a route by way of cmd arg.\n         (zebra_interface_address_delete_read) collapsed into\n         zebra_interface_address_read.\n         (zebra_interface_address_delete_read) ditto.\n         (zebra_interface_address_read) read address add/delete messages\n         by way of type argument. Describe command message format.\n         (zebra_interface_add_read) Unconditionally read new ifmtu6 field.\n         Describe command message format.\n         (zebra_interface_state_read) Unconditionally read new ifmtu6 field.\n         (zclient_redistribute_set) Collapsed into zclient_redistribute\n         (zclient_redistribute_unset) ditto\n         (zclient_redistribute) set/unset redistribution.\n         (zclient_redistribute_default_set) Collapsed into\n         zclient_redistribute_default.\n         (zclient_redistribute_default_unset) ditto.\n         (zclient_redistribute_default) Redistribute default set/unset.\n       * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add\n         zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add\n         zclient_redistribute. Ditto for\n         zclient_redistribute_default_{set/unset}.\n"
    },
    {
      "commit": "239389ba30e21de22e6c2dd708f44ece11b5807a",
      "tree": "db01f7a39c330f270e423c8df9bb24f9cf1db0af",
      "parents": [
        "5f77949e7e7c0b6ea23cb2554743ed2b940c340c"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Wed May 05 14:09:37 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Wed May 05 14:09:37 2004 +0000"
      },
      "message": "2004-05-05 Anthony.Golia@morganstanley.com\n\n        * ripd.c: (rip_update_jitter) Bound jitter to a more sensible\n          value, eg 1/4 of update time.\n"
    },
    {
      "commit": "a87552cdf2a54b34b0578102642e20f8e11fa754",
      "tree": "c9885fbfda55ca50b83764704efd83475bfd3abe",
      "parents": [
        "c53174045b26d0a87c68d276aeca0aaca9f464ae"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Mon May 03 20:00:17 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Mon May 03 20:00:17 2004 +0000"
      },
      "message": "2004-05-03 Paul Jakma \u003cpaul@dishone.st\u003e\n\n        * ripd.c: (rip_rte_process) fix typo in merge of previous patch\n          and run function through indent.\n"
    },
    {
      "commit": "b94f9dbd2616976b803d2fcefcf646573e49c368",
      "tree": "73914a5bad524bba2f737dba7f4f1839d5cf4e0e",
      "parents": [
        "35be31b6b2199e66e5d18420cece5e3bacb3371c"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sat May 01 20:45:38 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sat May 01 20:45:38 2004 +0000"
      },
      "message": "2004-03-19 Jean-Yves Simon \u003clethalwp@tiscali.be\u003e\n\n        * ripd.c: make ripd also check on administrative distance of his\n          own links to update routes.\n"
    },
    {
      "commit": "da9c9a24d09071c77843ce39f0470ba487c300bf",
      "tree": "5d7ee635cd11b1a2b541a913a4822a3c33a4035b",
      "parents": [
        "8c903fbb11e5eed5bcf08d26c2b984d07a82e109"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu Mar 18 02:40:55 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Thu Mar 18 02:40:55 2004 +0000"
      },
      "message": "From Sowmini fix for crash reported in [quagga-dev 929].\n"
    },
    {
      "commit": "caa6f8ac7d07f8cd3269255e6dce6d248f74af62",
      "tree": "6433147b72768e13c2bae54b481031ebd27b77a5",
      "parents": [
        "a1455d86f58dacbaf0abaacf7f5d15cfa8f1edb8"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Mar 03 19:48:48 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Mar 03 19:48:48 2004 +0000"
      },
      "message": "[quagga-dev 489] - fix ripd version send by Krzysztof Oledzki.\n"
    },
    {
      "commit": "a1455d86f58dacbaf0abaacf7f5d15cfa8f1edb8",
      "tree": "b39dfda2c6db53d0edb96a86c5b7d1beb4cd9662",
      "parents": [
        "429a0f8c5b0968218c1f022c9e2a722f20fb1877"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Mar 03 19:36:24 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Mar 03 19:36:24 2004 +0000"
      },
      "message": "\"show ip rip\" fix from Krzysztof Oledzki ([quagga-dev 437]).\n"
    },
    {
      "commit": "931cd54d52b9b034f8bf8b634e99bc2444d5094e",
      "tree": "2dceb95d4110c0e501b34473a71f375c2cd385f7",
      "parents": [
        "c15cfa832940dbdf49d1c1f03cfbab9078708e1e"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jan 23 15:31:42 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Jan 23 15:31:42 2004 +0000"
      },
      "message": "2004-01-23 sowmini.varadhan@sun.com\n\n        * rip_interface.c: obsolete unbind code in\n        rip_interface_multicast_set, and instead do the more portable\n        (though slower) method of creating a socket for each outgoing packet\n        and binding the source address on the new socket.\n        * rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that\n        source address is determined by the caller of rip_request_send for\n        ripv1 packets and non-multicast interfaces (rip_request_send loops\n        over all connected address in all other cases).\n        * rip_send_packet: don\u0027t send packets with source set to\n        ZEBRA_IFA_SECONDARY connected addresses; improved debug messages;\n"
    },
    {
      "commit": "f38a471c6fc96b63c5754448e9a9e32044c9ffd5",
      "tree": "6b474874414773770e2ad836065ba4658a913b9a",
      "parents": [
        "4aaff3f8d57fbb4fc5f4e5e52175a449686c3169"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sat Jun 07 01:10:00 2003 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sat Jun 07 01:10:00 2003 +0000"
      },
      "message": "From: Andrew J. Schorr \u003caschorr@telemetry-investments.com\u003e\nSubject: [zebra 12403] patch for ripd to accept any version of RIP\nby default\n\nThe default Cisco IOS behavior is to send RIP version 1 packets and receive\nversion 1 and version 2 packets.  But zebra version 0.92a sends and receives\nonly version 2 packets by default.\n\nI have patched the code to change zebra\u0027s default behavior to sending\nversion 2 packets (same as before) but receiving both versions.  While\nthis is still not identical to Cisco\u0027s behavior, it does now accept\npackets of both versions and retains backwards compatibility with\nzebra configurations.\n"
    },
    {
      "commit": "16705130a1c842f7de252779514e4e7f92d967e2",
      "tree": "27d9e22b4f407d505178362103fa5f9d73d741c6",
      "parents": [
        "4a6e22577a49c20b4e2265f174d56b4a9b633090"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun May 25 14:49:19 2003 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun May 25 14:49:19 2003 +0000"
      },
      "message": "Merge RIP part of 6Wind patch.\n"
    },
    {
      "commit": "445f143525ffd8b465aa31cb83b2dd38b9741ef7",
      "tree": "177df41fcf4d0e23f57443781b4521ac9fd1cc77",
      "parents": [
        "d748032f10058182bcd10ca7fe244d6918b68f14"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri May 16 19:00:31 2003 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri May 16 19:00:31 2003 +0000"
      },
      "message": "Update Changelogs\n"
    },
    {
      "commit": "718e3744195351130f4ce7dbe0613f4b3e23df93",
      "tree": "bac2ad39971cd43f31241ef123bd4e470f695ac9",
      "parents": [],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Dec 13 20:15:29 2002 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Dec 13 20:15:29 2002 +0000"
      },
      "message": "Initial revision\n"
    }
  ]
}