)]}' { "log": [ { "commit": "99e00a19bb8afcf081d1551b886c6d85188e6c60", "tree": "37bd6710fcb40e44b6e2f8e53b22c4cb81f77efb", "parents": [ "7d66284a5817a1613b1e4d64a0775ec04fdf8c01" ], "author": { "name": "Paul Jakma", "email": "paul@jakma.org", "time": "Mon Jan 23 14:47:32 2017 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Mon Jan 23 17:20:50 2017 +0000" }, "message": "lib: Bump library version-info\n" }, { "commit": "60cc95921ae663de325ca3e76e8c05d8224986ab", "tree": "7d78102aa9650da4bba1355b2a6601135d687b37", "parents": [ "4feb0d02c029e2e4f229f6283f579b8673b0ac11" ], "author": { "name": "Pradosh Mohapatra", "email": "pmohapat@cumulusnetworks.com", "time": "Mon Nov 09 20:21:41 2015 -0500" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Tue Sep 13 10:36:44 2016 +0100" }, "message": "bgpd, doc, lib, zebra: nexthop-tracking in zebra\n\n0. Introduction\n\nThis is the design specification for next hop tracking feature in\nQuagga.\n\n1. Background\n\nRecursive routes are of the form:\n\n p/m --\u003e n\n [Ex: 1.1.0.0/16 --\u003e 2.2.2.2]\n\nwhere \u0027n\u0027 itself is resolved through another route as follows:\n\n p2/m --\u003e h, interface\n [Ex: 2.2.2.0/24 --\u003e 3.3.3.3, eth0]\n\nUsually, BGP routes are recursive in nature and BGP nexthops get\nresolved through an IGP route. IGP usually adds its routes pointing to\nan interface (these are called non-recursive routes).\n\nWhen BGP receives a recursive route from a peer, it needs to validate\nthe nexthop. The path is marked valid or invalid based on the\nreachability status of the nexthop. Nexthop validation is also\nimportant for BGP decision process as the metric to reach the nexthop\nis a parameter to best path selection process.\n\nAs it goes with routing, this is a dynamic process. Route to the\nnexthop can change. The nexthop can become unreachable or\nreachable. In the current BGP implementation, the nexthop validation\nis done periodically in the scanner run. The default scanner run\ninterval is one minute. Every minute, the scanner task walks the\nentire BGP table. It checks the validity of each nexthop with Zebra\n(the routing table manager) through a request and response message\nexchange between BGP and Zebra process. BGP process is blocked for\nthat duration. The mechanism has two major drawbacks:\n\n(1) The scanner task runs to completion. That can potentially starve\n the other tasks for long periods of time, based on the BGP table\n size and number of nexthops.\n\n(2) Convergence around routing changes that affect the nexthops can be\n long (around a minute with the default intervals). The interval\n can be shortened to achieve faster reaction time, but it makes the\n first problem worse, with the scanner task consuming most of the\n CPU resources.\n\n\"Next hop tracking\" feature makes this process event-driven. It\neliminates periodic nexthop validation and introduces an asynchronous\ncommunication path between BGP and Zebra for route change notifications\nthat can then be acted upon.\n\n2. Goal\n\nStating the obvious, the main goal is to remove the two limitations we\ndiscussed in the previous section. The goals, in a constructive tone,\nare the following:\n\n- fairness: the scanner run should not consume an unjustly high amount\n of CPU time. This should give an overall good performance and\n response time to other events (route changes, session events,\n IO/user interface).\n\n- convergence: BGP must react to nexthop changes instantly and provide\n sub-second convergence. This may involve diverting the routes from\n one nexthop to another.\n\n3. Overview of the changes\n\nThe changes are in both BGP and Zebra modules. The short summary is\nthe following:\n\n- Zebra implements a registration mechanism by which clients can\n register for next hop notification. Consequently, it maintains a\n separate table, per (VRF, AF) pair, of next hops and interested\n client-list per next hop.\n\n- When the main routing table changes in Zebra, it evaluates the next\n hop table: for each next hop, it checks if the route table\n modifications have changed its state. If so, it notifies the\n interested clients.\n\n- BGP is one such client. It registers the next hops corresponding to\n all of its received routes/paths. It also threads the paths against\n each nexthop structure.\n\n- When BGP receives a next hop notification from Zebra, it walks the\n corresponding path list. It makes them valid or invalid depending\n on the next hop notification. It then re-computes best path for the\n corresponding destination. This may result in re-announcing those\n destinations to peers.\n\n4. Design\n\n4.1. Modules\n\nThe core design introduces an \"nht\" (next hop tracking) module in BGP\nand \"rnh\" (recursive nexthop) module in Zebra. The \"nht\" module\nprovides the following APIs:\n\nbgp_find_or_add_nexthop() : find or add a nexthop in BGP nexthop table\nbgp_find_nexthop() : find a nexthop in BGP nexthop table\nbgp_parse_nexthop_update() : parse a nexthop update message coming\n from zebra\n\nThe \"rnh\" module provides the following APIs:\n\nzebra_add_rnh() : add a recursive nexthop\nzebra_delete_rnh() : delete a recursive nexthop\nzebra_lookup_rnh() : lookup a recursive nexthop\n\nzebra_add_rnh_client() : register a client for nexthop notifications\n against a recursive nexthop\n\nzebra_remove_rnh_client(): remove the client registration for a\n recursive nexthop\n\nzebra_evaluate_rnh_table(): (re)evaluate the recursive nexthop table\n (most probably because the main routing\n table has changed).\n\nzebra_cleanup_rnh_client(): Cleanup a client from the \"rnh\" module\n data structures (most probably because the\n client is going away).\n\n4.2. Control flow\n\nThe next hop registration control flow is the following:\n\n\u003c\u003d\u003d\u003d\u003d BGP Process \u003d\u003d\u003d\u003d\u003e|\u003c\u003d\u003d\u003d\u003d Zebra Process \u003d\u003d\u003d\u003d\u003e\n |\nreceive module nht module | zserv module rnh module\n----------------------------------------------------------------------\n | | |\nbgp_update_ | | |\n main() | bgp_find_or_add_ | |\n | nexthop() | |\n | | |\n | | zserv_nexthop_ |\n | | register() |\n | | | zebra_add_rnh()\n | | |\n\nThe next hop notification control flow is the following:\n\n\u003c\u003d\u003d\u003d\u003d Zebra Process \u003d\u003d\u003d\u003d\u003e|\u003c\u003d\u003d\u003d\u003d BGP Process \u003d\u003d\u003d\u003d\u003e\n |\nrib module rnh module | zebra module nht module\n----------------------------------------------------------------------\n | | |\nmeta_queue_ | | |\n process() | zebra_evaluate_ | |\n | rnh_table() | |\n | | |\n | | bgp_read_nexthop_ |\n | | update() |\n | | | bgp_parse_\n | | | nexthop_update()\n | | |\n\n4.3. zclient message format\n\nZEBRA_NEXTHOP_REGISTER and ZEBRA_NEXTHOP_UNREGISTER messages are\nencoded in the following way:\n\n/*\n * 0 1 2 3\n * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * | AF | prefix len |\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * . Nexthop prefix .\n * . .\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * . .\n * . .\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * | AF | prefix len |\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * . Nexthop prefix .\n * . .\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n */\n\nZEBRA_NEXTHOP_UPDATE message is encoded as follows:\n\n/*\n * 0 1 2 3\n * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * | AF | prefix len |\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * . Nexthop prefix getting resolved .\n * . .\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * | metric |\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * | #nexthops |\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * | nexthop type |\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * . resolving Nexthop details .\n * . .\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * . .\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * | nexthop type |\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n * . resolving Nexthop details .\n * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+\n */\n\n4.4. BGP data structure\n\nLegend:\n\n/\\ struct bgp_node: a BGP destination/route/prefix\n\\/\n\n[ ] struct bgp_info: a BGP path (e.g. route received from a peer)\n\n _\n(_) struct bgp_nexthop_cache: a BGP nexthop\n\n /\\ NULL\n \\/--+ ^\n | :\n +--[ ]--[ ]--[ ]--\u003e NULL\n /\\ :\n \\/--+ :\n | :\n +--[ ]--[ ]--\u003e NULL\n :\n _ :\n (_).............\n\n4.5. Zebra data structure\n\nrnh table:\n\n O\n / \\\n O O\n / \\\n O O\n\n struct rnh\n {\n u_char flags;\n struct rib *state;\n struct list *client_list;\n struct route_node *node;\n };\n\n5. User interface changes\n\nquagga# show ip nht\n3.3.3.3\n resolved via kernel\n via 11.0.0.6, swp1\n Client list: bgp(fd 12)\n11.0.0.10\n resolved via connected\n is directly connected, swp2\n Client list: bgp(fd 12)\n11.0.0.18\n resolved via connected\n is directly connected, swp4\n Client list: bgp(fd 12)\n11.11.11.11\n resolved via kernel\n via 10.0.1.2, eth0\n Client list: bgp(fd 12)\n\nquagga# show ip bgp nexthop\nCurrent BGP nexthop cache:\n 3.3.3.3 valid [IGP metric 0], #paths 3\n Last update: Wed Oct 16 04:43:49 2013\n\n 11.0.0.10 valid [IGP metric 1], #paths 1\n Last update: Wed Oct 16 04:43:51 2013\n\n 11.0.0.18 valid [IGP metric 1], #paths 2\n Last update: Wed Oct 16 04:43:47 2013\n\n 11.11.11.11 valid [IGP metric 0], #paths 1\n Last update: Wed Oct 16 04:43:47 2013\n\nquagga# show ipv6 nht\nquagga# show ip bgp nexthop detail\n\nquagga# debug bgp nht\nquagga# debug zebra nht\n\n6. Sample test cases\n\n r2----r3\n / \\ /\n r1----r4\n\n- Verify that a change in IGP cost triggers NHT\n + shutdown the r1-r4 and r2-r4 links\n + no shut the r1-r4 and r2-r4 links and wait for OSPF to come back\n up\n + We should be back to the original nexthop via r4 now\n- Verify that a NH becoming unreachable triggers NHT\n + Shutdown all links to r4\n- Verify that a NH becoming reachable triggers NHT\n + no shut all links to r4\n\n7. Future work\n\n- route-policy for next hop validation (e.g. ignore default route)\n- damping for rapid next hop changes\n- prioritized handling of nexthop changes ((un)reachability vs. metric\n changes)\n- handling recursion loop, e.g.\n 11.11.11.11/32 -\u003e 12.12.12.12\n 12.12.12.12/32 -\u003e 11.11.11.11\n 11.0.0.0/8 -\u003e \u003cinterface\u003e\n- better statistics\nAddresses upstream comments.\n\n\"show ip bgp nexthop detail\" couldn\u0027t display multiple NHs due to a bug.\nFix that.\n\nFix reference counts for the nexthop cache entries\n\nSigned-off-by: Pradosh Mohapatra \u003cpmohapat@cumulusnetworks.com\u003e\nSigned-off-by: Daniel Walton \u003cdwalton@cumulusnetworks.com\u003e\nSigned-off-by: Dinesh Dutt \u003cddutt@cumulusnetworks.com\u003e\nSigned-off-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\nSigned-off-by: Vivek Venkatraman \u003cvivek@cumulusnetworks.com\u003e\n\nFix reference counts for the nexthop cache entries.\n\nSigned-off-by: Vivek Venkatraman \u003cvivek@cumulusnetworks.com\u003e\n\nEdited-by: Paul Jakma \u003cpaul.jakma@hpe.com\u003e\n- Fix nexthop_ipv6_add defs in rib.h not having been modified with rib_ prefix.\n- Remove rib_lookup_and_pushup, appears not to be used except for\n !HAVE_NETLINK \u0026\u0026 HAVE_STRUCT_IFALIASREQ case of ioctl.c::if_set_prefix,\n so it\u0027s not being used at all on platform with most testing of RIB.\n" }, { "commit": "00667cea1fbd088900f7909f2044da2a7e26270d", "tree": "33044643861697f51f026938d24d87056ef5f37f", "parents": [ "880e31ca2d8a8a8fcbc28bfeac9bd13fc76dd2c1" ], "author": { "name": "Christian Franke", "email": "nobody@nowhere.ws", "time": "Tue May 03 19:59:42 2016 +0200" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Tue Sep 13 10:36:37 2016 +0100" }, "message": "lib: add event_counter\n\nSigned-off-by: Christian Franke \u003cchris@opensourcerouting.org\u003e\n" }, { "commit": "b0d02889624eaafa0984873dcd78c086418bdf13", "tree": "8f15cb8a76935d04c0a18d28a647bc0915d7d86a", "parents": [ "205e6744f2dc2909dd494c9ce8acb82821459f1f" ], "author": { "name": "Donald Sharp", "email": "sharpd@cumulusnetworks.com", "time": "Fri Jan 08 07:37:14 2016 -0500" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@hpe.com", "time": "Fri Feb 26 14:11:45 2016 +0000" }, "message": "lib, bgpd: Remove \u0027struct fifo\u0027 from lib/zebra.h\n\nThe \u0027struct fifo\u0027 and it\u0027s accompanying #defines do not\nbelong in lib/zebra.h. Move them into their own header.\n\nSigned-off-by: Donald Sharp \u003csharpd@cumulusnetworks.com\u003e\n" }, { "commit": "41f44a23e86a65a5cad7e5e8cafd7e935f153232", "tree": "1fcffa568b188ae66e5f18df09f6960522dfe564", "parents": [ "395828eea809e8b2b8c5824d3639cefedd7aa9f0" ], "author": { "name": "Feng Lu", "email": "lu.feng@6wind.com", "time": "Fri May 22 11:39:56 2015 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Jun 02 06:58:12 2015 +0200" }, "message": "lib, zebra: move \"struct vrf\" to be a lib module\n\nPreviously \"struct vrf\" is defined locally in zebra. Now it is moved\nto be a lib module.\n\nThis is the first step to support multi-VRF in quagga. The\nimplementation is splitted into small patches for the purpose of\neasy review.\n\n* lib:\n \"struct vrf\" with basic members is defined in vrf.c. The member\n \"void *info\" is for user data.\n\n Some basic functions are defined in vrf.c for adding/deleting/\n looking up a VRF, scanning the VRF table and initializing the\n VRF module.\n\n The type \"vrf_id_t\" is defined specificly for VRF ID.\n\n* zebra:\n The previous \"struct vrf\" is re-defined as \"struct zebra_vrf\";\n and previous \"vrf\" variables are renamed to \"zvrf\".\n\n The previous \"struct vrf\" related functions are removed from\n zbera_rib.c. New functions are defined to maintain the new\n \"struct zebra_vrf\".\n\n The names vrf_xxx are reserved for the functions in VRF module.\n So:\n - the previous vrf_table() are renamed to zebra_vrf_table();\n - the previous vrf_static_table() are renamed to\n zebra_vrf_static_table().\n\n The main logic is not changed.\n\n BTW: Add a statement to zebra_snmp.c telling that the SNMP is\n running only for the MIBs in the default VRF.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: Nicolas Dichtel \u003cnicolas.dichtel@6wind.com\u003e\nAcked-by: Vincent JARDIN \u003cvincent.jardin@6wind.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "e66cbd10d52a79fd61acab9d615683eebdbf1df5", "tree": "e81be2319e7b2c485354283f025e090bb56c8754", "parents": [ "4584c239201037648abf1a6615186f9cdeb86b23" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Mon Apr 13 10:21:34 2015 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue May 05 15:06:22 2015 +0200" }, "message": "lib: hide internal prefix list structures\n\nThese are about to be touched and there\u0027s no point in other code\ntouching into prefix list\u0027s internas. Add some isolation.\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "c0bedebfe9ca1a1ded02f1f481762dd41defa63e", "tree": "9c040f71733fb7509c03457bc146373e65e95536", "parents": [ "3a7e83c2387885075c9ecf1912dd6c9399c6947a" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Mar 03 10:00:43 2015 +0100" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Apr 21 10:19:33 2015 +0200" }, "message": "build: add --enable-werror\n\nThis allows enabling -Werror in a consistent way. Note that this is\ndifferent from just specifiying it in CFLAGS, since that would either\nbreak configure tests (if done on ./configure), or would override\nconfigure\u0027s CFLAGS (if done on make).\n\nUsing --enable-werror instead provides a new WERROR variable that is\nadditionally used during make with a consistent set of warning flags.\n\nThe tests/ directory is exempt. (Rationale being, better to have more\ntests than pedantically complain about them.)\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "237aac56960575f6ad2451ba2796d94bd5ae4b33", "tree": "f23c49fa32bc6b706bd5f37a9a3a45ce27adf15d", "parents": [ "b6fa76098d127f5641a7dda0dee21f06ca167edb" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Sat Jun 28 22:23:10 2014 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Sat Feb 14 19:19:14 2015 +0100" }, "message": "build: get rid of INCLUDES, use AM_CPPFLAGS\n\nINCLUDES in configure.ac was not used at all, and INCLUDES in\nMakefile.am is supposed to be AM_CPPFLAGS these days.\n\nReduces warnings spewed during bootstrap/autoreconf.\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\nAcked-by: Greg Troxel \u003cgdt@ir.bbn.com\u003e\nAcked-by: Feng Lu \u003clu.feng@6wind.com\u003e\nAcked-by: Paul Jakma \u003cpaul@jakma.org\u003e\n" }, { "commit": "8551e6dadce41fb87a61767af723cb25ae611a04", "tree": "cb0854c2e216989a0fa211d56d2bf6fd6948b2d6", "parents": [ "a83a1e9c2f035d3152451dcfc97ab13b4ac427b9" ], "author": { "name": "Dinesh Dutt", "email": "ddutt@cumulusnetworks.com", "time": "Tue Oct 22 17:42:18 2013 -0700" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Oct 22 18:01:31 2013 -0700" }, "message": "ospf6d/ospfd: refactor some common defines\n\nRearranging common defs and structures for use betweeen OSPFv2 and\nOSPFv3. Created a new file called libospf.h under lib directory to\nhold defines that are common between OSPFv2 and OSPFv3 code bases.\n\n[DL: split of defines refactor from timer refactor]\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "8df55970b64984e5071afd510caad5e778569bc1", "tree": "9aedcd7fa1c9b8ced8a140aa2cf7292c9d48d879", "parents": [ "58952492d2eedd4b7974274a578a1fa9707125bb" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Fri Mar 01 12:03:58 2013 +0100" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Apr 09 17:07:07 2013 +0200" }, "message": "build: reference libcap from libzebra (BZ#393,626)\n\nWhile the actual build failures have been fixed independently by\nd1d3ac9 \"build: reorder libraries to address linker error\", libzebra\nstill does not reference libcap. This will lead to more build failures\nif someone else tries to use libzebra and doesn\u0027t add libcap.\n\nLet\u0027s just add libcap here and be done with it.\n\nI\u0027ve not added libcap to the _DEPENDENCIES variable above since libcap\nis a system library. Actually, the whole _DEPENDENCIES thing is rather\nfishy; automake automatically sets _DEPENDENCIES from _LIBADD. For the\nsake of not breaking stuff that works (especially since most autotools\nstuff is arcane magic), I\u0027m leaving it alone...\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "61be0ee8824b30e94ddd2bfe8b51fcfd330c41dd", "tree": "483968a7a26038e2f88056458ac575ff9938e386", "parents": [ "675769b1b17a068526d90786e1c35304656faba7" ], "author": { "name": "Hasso Tepper", "email": "hasso.tepper@gmail.com", "time": "Fri Dec 14 14:58:32 2012 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Fri Jan 11 21:50:06 2013 +0100" }, "message": "build: Fix build for systems with no /bin/true\n\nThere are systems with no /bin/true - it might have different path\n(/usr/bin/true) or even a shell builtin.\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "4209a88759c41aac54465b6d4389b7daaad6ac80", "tree": "bab409239b92b7151284b03640c07aa3f18127f6", "parents": [ "fd76f41ac0267dc4cf5438ac8f5e23fae6810d31" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Thu Dec 13 10:59:00 2012 +0100" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Thu Dec 13 11:04:37 2012 +0100" }, "message": "build: fix dist tarball\n\nautomake file lists haven\u0027t quite kept up with recent changes, time to\nfix them up so the dist tarball actually works...\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "0be793e674c8b076f0e8bf327257f15803480f49", "tree": "28c42a679265d25ea41f4265232e2bcc167b1f49", "parents": [ "324ed1f87aedf30a45aea951edb2e717c5f9b7fb" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Nov 27 01:34:56 2012 +0000" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Dec 12 15:34:37 2012 +0100" }, "message": "build: include git info\n\nIf enabled with --with-pkg-gitversion on ./configure, this will append\ngit version strings and branch information at the following places:\n - overall version number: 0.99.21-g0123456\n - login motd and show version: tag information + git id + branches\n\nSample output:\n Hello, this is Quagga (version 0.99.21-g14b49ad-dirty).\n Copyright 1996-2005 Kunihiro Ishiguro, et al.\n\n This is a git build of quagga_0_99_21_release-106-g14b49ad-dirty\n Associated branch(es):\n\tlocal:master\n\n[v2]: fix build without gitinfo (add \"else\" branch)\n[v2]: fix for repos without any tags (different git describe output)\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "d6be5fb9bc41ea77547204eeedd12132b26ad662", "tree": "dfe0f2a92faf6bd7d5b5b5f7b8006014a03e5469", "parents": [ "3a4c96885ec878ae4631b0fb7bb7839578725976" ], "author": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Thu May 24 09:44:43 2012 +0200" }, "committer": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Mon Jun 25 19:03:23 2012 +0200" }, "message": "agentx: add AgentX support to Quagga.\n\n--enable-snmp will enable AgentX support in Quagga. SMUX is still here\nand can be enabled with --enable-snmp\u003dsmux. AgentX support can be\nenabled with \"agentx\" in configuration file. As for SMUX, this command\nis not understood by vtysh. It can be disabled with \"no agentx\",\nthough there is no real use of this since this command cannot be used\nwith vtysh.\n\nIf \"agentx\" and \"no agentx\" command were added to vtysh, it would not\nbe possible to disable agentx support after enabling it because\nNetSNMP does not expose the appropriate methods for this.\n\nThe internals of AgentX are hidden by NetSNMP. Therefore, we don\u0027t\nhave a file descriptor to add to the threading system. We do not have\nthe timers to set either. Therefore, the event loop is modified to\nmake use of snmp_select_info() from NetSNMP.\n\nTraps are not supported yet.\n" }, { "commit": "3a4c96885ec878ae4631b0fb7bb7839578725976", "tree": "0b0334f9b6b7fce2bc2ebe2fac0c51350c1838de", "parents": [ "08d7f6533ecc0f935a76918c462982004534864d" ], "author": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Wed May 23 00:52:46 2012 +0200" }, "committer": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Mon Jun 25 19:03:23 2012 +0200" }, "message": "smux: isolate SMUX implementation from SNMP implementation\n\nlib/snmp.c gets OID related helper functions that can be used with\nanother SNMP interface. smux.h is cleaned of SMUX specific bits to\nonly expose functions that may be used by an alternative\nimplementation. We also do not redefine functions already present in\nNetSNMP. Just use the appropriate headers.\n" }, { "commit": "08d7f6533ecc0f935a76918c462982004534864d", "tree": "0e67590a8a2aba551439c46bfa8b33d7fba4feb7", "parents": [ "6b1e37f8537fa2a4560de32e83ca5089763e2d39" ], "author": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Tue May 22 22:29:17 2012 +0200" }, "committer": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Mon Jun 25 19:03:23 2012 +0200" }, "message": "build: use net-snmp-config to configure NetSNMP\n\nThe correct method to link to NetSNMP is to use net-snmp-config (which\nis like pkg-config). Explicit link to libcrypto is also dropped\n(NetSNMP libs are linked to libcrypto, no need to link Quagga to\nit). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a\nbug in configure.ac, it was properly populated.\n" }, { "commit": "9e7a548ce421660b0d22bfeb90c2b2b53742aac7", "tree": "4c962403808f98806781fb4ad15594152bc1effa", "parents": [ "a47c5838e9f445ab887ad927706b11ccbb181364" ], "author": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Tue May 22 14:32:22 2012 +0200" }, "committer": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Mon Jun 25 19:03:23 2012 +0200" }, "message": "build: allow configure and build in a separate directory\n\nSome .h files in lib/ are autogenerated. The search path should\ninclude the build directory and the source directory. They usually\nmatch but sometimes, they may be different. For example:\n\n $ mkdir build\n $ cd build\n $ ../configure\n $ make\n" }, { "commit": "e0ca5fde7be5b5ce90dae78c2477e8245aecb8e9", "tree": "0e0b32ddbed4a84a3b2de9dd7217165cb81f52fa", "parents": [ "ebf08631cad8a420fc6bfb7c45af5496dc11023e" ], "author": { "name": "David Lamparter", "email": "equinox@diac24.net", "time": "Wed Sep 16 01:52:42 2009 +0200" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Tue Dec 13 19:13:17 2011 +0400" }, "message": "lib: put route_types.txt to real use\n\nthis replaces most occurences of routing protocol lists by preprocessor\ndefines from route_types.h. the latter is autogenerated from\nroute_types.txt by a perl script (previously awk). adding a routing\nprotocol now is mostly a matter of changing route_types.txt and log.c.\n\nConflicts:\n\n\tlib/route_types.awk\n" }, { "commit": "dca6c883ea6219460efbe3dadde4b8b9cb12c845", "tree": "71352e214bd59277a50a43779bb2cbafbace6cc3", "parents": [ "3f3dc2bd5f8cbde24cb581ed0aed0e372bfd556c" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Wed Jan 27 12:38:16 2010 +0300" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Wed Jan 27 12:38:16 2010 +0300" }, "message": "lib: undo the last PIE commit\n\nStephen:\nA recent change breaks build Quagga on Debian Lenny with amd64 (but not\ni386). Not sure whether this is cause by ld, gcc, or libtool; but\nwhatever it just won\u0027t work for a large number of users.\n\nMathias:\nI would guess it\u0027s a problem of libtool because it adds \"-fPIC -DPIC\" to\nthe compiler flags but doesn\u0027t remove -fPIE. That wouldn\u0027t be a problem\nif the compiler would ignore the -fPIE in favor to the latter -fPIC, but\nobviously it does not. [...] Those objects were actually compiled with\n-fPIC but also -fPIE which seems to confuse gcc.\n" }, { "commit": "3f3dc2bd5f8cbde24cb581ed0aed0e372bfd556c", "tree": "7754c556419e6315fed189a4d7a88f33a3558852", "parents": [ "65957886bfd0dd9d95360d8b015781fc82cc09be" ], "author": { "name": "Mathias Krause", "email": "Mathias.Krause@secunet.com", "time": "Wed Jan 20 17:39:13 2010 +0300" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Wed Jan 20 17:39:13 2010 +0300" }, "message": "lib: fix PIE build flags\n\nBecause the final executables are built as position independent\nexecutables (PIE) -- when configure has detected compiler supported for\nPIE -- the objects in the library archive must be built in that way,\ntoo. Otherwise the runtime linker has to do unneccesary relocation for\neach start of the program. Even worse, the programs won\u0027t even be able\nto start on a (hardened) kernel that doesn\u0027t allow those relocations to\nhappen by preventing making the .text segment writable (PaX\u0027s MPROTECT\nfeature comes to mind). The attached patch fixes this issue by adding\nthe appropriate flags to the Makefile.am.\n" }, { "commit": "9c42a6ebbc103a0a4be6af782388ad26e6c03556", "tree": "fcbdec3f26cb36539b9d66e1b8f4e63cfe1c3799", "parents": [ "466c96562c6e39596dc441c30420b335f83f01ea" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Tue Jun 27 07:52:03 2006 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Tue Jun 27 07:52:03 2006 +0000" }, "message": "[lib] Centralise Zserv route type information, auto-generate redist strings\n\n2006-05-23 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* route_types.txt: New file, table of ZEBRA_ROUTE definitions.\n\t* route_types.awk: New script, to parse previous and generate\n\t (for now) redistribute string defines.\n\t* Makefile.am: build route_types.h using previous two, ala\n\t memtypes.h, include the script and table file in EXTRA_DIST.\n\t* command.h: pull in route_types.h, add a REDIST_STR define.\n" }, { "commit": "cec0c4fb1beb024e54d134a419893e2ad4389254", "tree": "769e13753bfc06427e626f74c1635e8856d05aca", "parents": [ "41be32bfe6d0d6ed0058babdcbc3aac18988dbec" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu Mar 30 13:58:05 2006 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu Mar 30 13:58:05 2006 +0000" }, "message": "[lib] fix libtool version argument in Makefile.am\n\n2006-03-16 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* Makefile.am: Fix -version-info argument.\n" }, { "commit": "34204aac424f8c29317d863d64f1c3bb4d241a50", "tree": "a7ad861d7b3454dbe96b6e7a31d7dbacc4ad24e3", "parents": [ "35a60c2d3c217e3b835821a7f6ea458e2eff44cf" ], "author": { "name": "paul", "email": "paul", "time": "Thu Nov 03 09:00:23 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Thu Nov 03 09:00:23 2005 +0000" }, "message": "2005-11-03 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* zebra.h: BSD BYTE_ORDER define isn\u0027t available everywhere,\n\t define if needs be.\n\t* checksum.h: new file. checksum.c exports in_cksum, provide\n\t a header for it.\n\t* checksum.c: (in_cksum) callers shouldn\u0027t have to know it uses\n\t a u_short internally, change to void *.\n\t* Makefile.am: Add checksum.h\n\t* command.h: remove bogus trailling slash.\n\t* md5.c: (general) Update it for the twentieth century. ANSI\n\t declarations are widely supported now.. Don\u0027t include system\n\t headers, only include zebra.h. Use POSIX types (the\n\t alternative is to define u_int64_t in a portable way - rest\n\t of Quagga needs same cleanup).\n\t Make endian-conditional code be compiler conditional rather\n\t than preprocessor conditional, so that breakage gets noticed\n\t quicker.\n\t* md5.h: POSIX types. Get rid of the odd __P() non-ANSI capable\n\t compiler compatibility hack.\n" }, { "commit": "c1a03d4774f8ecc30a21267469d48cb2276de48c", "tree": "1bf9309bc99e316a5633d18f7724330d8d6fa836", "parents": [ "aa2e32be264710ef208516dfe1661b8148c3eede" ], "author": { "name": "vincent", "email": "vincent", "time": "Wed Sep 28 15:47:44 2005 +0000" }, "committer": { "name": "vincent", "email": "vincent", "time": "Wed Sep 28 15:47:44 2005 +0000" }, "message": "2005-09-28 Alain Ritoux \u003calain.ritoux@6wind.com\u003e\n\n * lib/md5-gnu.h: removed\n * lib/md5.h: replaces md5-gnu.h\n * lib/Makefile.am: use correct md5.h\n * lib/md5.c: import from WIDE\n * ospfd/ospf_packet.c: use new md5 API\n * ripd/ripd.c: use new md5 API\n" }, { "commit": "354d119a6569b2c6335ae9309e4606e5cccedb6a", "tree": "e29bb213c52bb46b3454f845fa5892df306b82e2", "parents": [ "b64d92a8a88e69f711976a3c12c17667ecaba4ee" ], "author": { "name": "paul", "email": "paul", "time": "Mon Apr 25 16:26:42 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Mon Apr 25 16:26:42 2005 +0000" }, "message": "2005-04-25 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* workqueue.{c,h}: Helper API for setting up and running queues via\n\t background threads.\n\t* command.c: install the \u0027show workqueues\u0027 command\n\t* memtypes.c: Add work queue mtypes, and a rib-queue type for\n\t a zebra rib work queue.\n\t* memtypes.h: Updated to match memtypes.c\n\t* Makefile.am: Add new workqueue files to build.\n" }, { "commit": "c4d23bba6d522336755676a028a8f4355500ab67", "tree": "0d86b64de84a076a0395826a2383cbf4b7ce1f3a", "parents": [ "2c1de2a8b89f3d3364ad716cfbba295097c7fc61" ], "author": { "name": "paul", "email": "paul", "time": "Mon Apr 25 14:18:43 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Mon Apr 25 14:18:43 2005 +0000" }, "message": "- arg, fix the missing slash. Beat myself with the diff of the last commit\n to HACKING (which I added..)\n" }, { "commit": "ab59ae3519d986d4544ba1ca15d6c17b3f52f86b", "tree": "d95735cfce66337328c6503410f7b0d1fa1ff676", "parents": [ "74a2dd7b773e9f8db0f38c40b3e6e9b32d597a0a" ], "author": { "name": "paul", "email": "paul", "time": "Mon Apr 25 13:52:26 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Mon Apr 25 13:52:26 2005 +0000" }, "message": "2005-04-25 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* Makefile.am: Refer to source files via srcdir variable, fix\n\t out-of-tree build breakage.\n" }, { "commit": "d45f1f1c3f85952651f27a8a98861ea45fd03789", "tree": "a3685403e9f78331e63b3032553d638289fa3aad", "parents": [ "f482ed4d13e73c27424a45e4c8cfaaa363a35d89" ], "author": { "name": "paul", "email": "paul", "time": "Fri Apr 15 22:18:37 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Apr 15 22:18:37 2005 +0000" }, "message": "2005-04-15 Paul Jakma \u003cpaul@dishone.st\u003e\n\n * Makefile.am: memtypes.awk is gawk dependent, use the GAWK automake\n\t var.\n\t* memtypes.h: New file, auto-generated, checked in for convenience.\n" }, { "commit": "2fd2fd5d4c0e5a67f1b84abe18b54417237b20ab", "tree": "106e9f02a377c796ce41f3033beea2404c6e0e58", "parents": [ "d98b74b504554d851d1281017724984069340cad" ], "author": { "name": "paul", "email": "paul", "time": "Fri Apr 15 11:47:15 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Apr 15 11:47:15 2005 +0000" }, "message": "2005-04-15 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* memtypes.c: The new, unified location for memory type definitions.\n\t The memtype enum and declarations for memory_lists are built from\n this automatically and put into memtypes.h.\n * memtypes.awk: New script to generate memtypes.h from memtypes.c\n * memory.h: Finally, the enum can banished!\n * memory.c: Finally, the seperate mtype memory_list definitions can\n be banished!\n (log_memstats) Increase width of fields\n (show_memory_zebra_cmd) display zebra specific memory types.\n Increase width of fields.\n * Makefile.am: Add memtypes.{c,h}, add BUILT_SOURCES for memtypes.h\n Add a rule to build memtypes.h using memtypes.awk.\n Add memtypes.awk to EXTRA_DIST.\n" }, { "commit": "2d58228ecabb23b064e8a06e6241cf0d7e5ca785", "tree": "443509e8113598c7dadaa5e9cdbb153c147d0ffe", "parents": [ "17eff7cb9010c0ba386ab801c220811ded4242b3" ], "author": { "name": "hasso", "email": "hasso", "time": "Mon Mar 28 15:29:07 2005 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Mon Mar 28 15:29:07 2005 +0000" }, "message": "\t* configure.ac, */Makefile.am: Fix previous commit. SNMP includes\n\t must be after lib/ includes in some systems. Introduce SNMP_INCLUDES\n\t for that.\n" }, { "commit": "5b85facc638d219a7281b75bec8a08dcf79a46ce", "tree": "3f12c2b86c5ea322c72511304af81596bb89cdae", "parents": [ "063ee52af64472474af2fa4b3cb2ba9ced746b9f" ], "author": { "name": "ajs", "email": "ajs", "time": "Fri Nov 26 19:36:42 2004 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Fri Nov 26 19:36:42 2004 +0000" }, "message": "2004-11-26 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* debug.[ch]: Remove unused files.\n\t* Makefile.am: Remove references to debug.c and debug.h\n\t* ospf_main.c: Remove #include \"debug.h\" (was not being used, and\n\t lib/debug.h has now been deleted).\n" }, { "commit": "d1c51d7c27a1c5f5c838ef5f09e98e33527bfddc", "tree": "445bf17ab157f7f5d0ed52cc1873cc15d5737256", "parents": [ "546e20d6754a0a4c6bc48d642b5bfb4a3db6d7c3" ], "author": { "name": "ajs", "email": "ajs", "time": "Fri Nov 26 14:14:30 2004 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Fri Nov 26 14:14:30 2004 +0000" }, "message": "2004-11-26 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* Makefile.am: Need to add zassert.h to pkginclude_HEADERS.\n" }, { "commit": "6590f2c3dc10acaa04cea3206fd00445e0a6145c", "tree": "6ca50941520649a19f7488a45a4ca2f9b7f84ef1", "parents": [ "3fb9cd6ef456959b6eff939d5c316f6785c2dda4" ], "author": { "name": "hasso", "email": "hasso", "time": "Tue Oct 19 20:40:08 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Tue Oct 19 20:40:08 2004 +0000" }, "message": "Small copyright string and hostname related cleanup.\n" }, { "commit": "8c328f1106cf0498333c2d8a96940e7b4581e316", "tree": "9bf24cca6a68a9dd5d4dda586484e497d0c19ca6", "parents": [ "98c91ac6ac085713c00af00a6ac41779be6b50b3" ], "author": { "name": "hasso", "email": "hasso", "time": "Tue Oct 05 21:01:23 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Tue Oct 05 21:01:23 2004 +0000" }, "message": "Number of warnings is down to 3 again in lib directory. A lot of const\u0027s\nadded to strings and a lot of int -\u003e unsigned int changes.\n" }, { "commit": "b7a97f825768bb3e617cb115540c74b65914e628", "tree": "7614897d5d668291f854b5283daf424b55a12853", "parents": [ "33f92320e8a6b078a5972d05c8f49487d8edf19c" ], "author": { "name": "gdt", "email": "gdt", "time": "Fri Jul 23 16:23:56 2004 +0000" }, "committer": { "name": "gdt", "email": "gdt", "time": "Fri Jul 23 16:23:56 2004 +0000" }, "message": "(somewhat unrelated cleanups, but all are very minor)\n\n2004-07-23 Greg Troxel \u003cgdt@poblano.ir.bbn.com\u003e\n\n\t* */Makefile.am: Use ../dir/libfoo.la, rather than \"-L../dir\n\t-lfoo\", to avoid linking against installed libraries from a\n\tprevious version.\n\n\t* {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared\n\tlibrary version number to be 0.0\n\n\t* configure.ac: remove spurious , so extract.pl is chmod\u0027d +x.\n\n\t* HACKING: explain shared library versioning rules\n" }, { "commit": "b9790b34c825e390c818044f6666f73beee1d373", "tree": "83d326652663957d7573a7ace0618b763289eacc", "parents": [ "5510e83b395ccf19c07a89fee1baba958e3a580d" ], "author": { "name": "paul", "email": "paul", "time": "Fri Jul 09 14:05:47 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Jul 09 14:05:47 2004 +0000" }, "message": "2004-07-09 Paul Jakma \u003cpaul@dishone.st\u003e\n\n * jhash.{c,h}: New files. Bob Jenkins\u0027 public domain hashing\n function, as implemented in linux kernel by David Miller.\n" }, { "commit": "87efd646ffef693235d9d29b005a1467373c51bd", "tree": "85d43e323abb1de6b1ddb6e889f9d580fdb8546d", "parents": [ "f2bfdee5f9db5363fcd13763eca3fda729067d57" ], "author": { "name": "gdt", "email": "gdt", "time": "Wed Jun 30 17:36:11 2004 +0000" }, "committer": { "name": "gdt", "email": "gdt", "time": "Wed Jun 30 17:36:11 2004 +0000" }, "message": "Add libtool support.\n\nlibzebra and libospfapiclient are now built shared, and linked shared\nwith the daemons. This reduces the memory needed when running\nmultiple daemons; each daemon is at least 150k smaller. Static\nlibraries are still built, and libtool should use them on platforms\nwhich don\u0027t have shared libaries. As with autoconf, the user of a\ndistribution does not need libtool; one just needs that to build from\nCVS.\n\nlibospf.a is still a non-shared library, and still installed, not\nbecause that makese sense, but because I don\u0027t understand why it is\nthe way it is now.\n\nNote that the tree was tagged \u0027libtool-before\u0027 just before this commit.\n" }, { "commit": "6708fa3c3e6aef369be13f3915698f407107cae2", "tree": "32aa937b0761573d3dfcfdda8a9929f9794403cb", "parents": [ "3e31cded7fd9b6a1bac06de2ee2e875a5c40074c" ], "author": { "name": "hasso", "email": "hasso", "time": "Tue May 18 18:46:54 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Tue May 18 18:46:54 2004 +0000" }, "message": "Start of new ospf6d merge from Zebra.\n" }, { "commit": "2d75d05218b76230bbd608cab8d08a5f47d77056", "tree": "7087570a7dbb8b650349b98a8f1963dfdcedceb1", "parents": [ "9a76e2ddb6c4dc303ce7ed937c0cfa9430c3ed27" ], "author": { "name": "paul", "email": "paul", "time": "Mon Jan 19 21:31:15 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Mon Jan 19 21:31:15 2004 +0000" }, "message": "2004-01-19 Paul Jakma \u003cpaul@dishone.st\u003e\n\n * tests/test-sig.c: New file, regression test for sigevents.\n * lib/Makefile.am: add sigevent.{c,h}\n * (isis|rip|ripng|ospf|ospf6|bgp)d/\\1_main.c: modify for sigevents.\n * zebra/main.c: ditto.\n" }, { "commit": "af273652d500b7d3ed4de0da856634a3a0638e67", "tree": "b9a70e539dd2aa52b152cc0144c13c4f5eff8ada", "parents": [ "239aecc01cd8ef389b3684cff6ba372da51826ff" ], "author": { "name": "gdt", "email": "gdt", "time": "Mon Dec 08 18:12:34 2003 +0000" }, "committer": { "name": "gdt", "email": "gdt", "time": "Mon Dec 08 18:12:34 2003 +0000" }, "message": "{lib,ospfd,ospfapi}/Makefile.am:\n\nUse pkginclude_HEADERS rather than include_HEADERS to place includes\nin ${prefix}/include/quaggainstead of polluting ${prefix}/include.\n" }, { "commit": "04bd484bf272dd580349c832f84cf5ffa27003bb", "tree": "9f9c50fda664e0ce62d43af14ec7ec546f801547", "parents": [ "e92fbaf27ea028d4def1246b7fadb2096bfa4d8d" ], "author": { "name": "paul", "email": "paul", "time": "Fri Oct 24 04:24:39 2003 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Oct 24 04:24:39 2003 +0000" }, "message": "2003-10-24 Paul Jakma \u003cpaul@dishone.st\u003e\n\n * configure.ac: Check for fcntl()\n * {bgpd,ospf,ospf6d,ripd,ripngd}/Makefile.am: Install conf file via\n regular automake means, not magic install incantations, see\n bug #38.\n * lib/Makefile.am: install the headers, needed to link libzebra.a\n (and hence libospf.a, OSPF-API, etc.)\n" }, { "commit": "fd6ff2fc6b221f2c2c30ef0d29f5e938c1737577", "tree": "fa1707523ae5dfd8de02b24500af58dbf82d8a79", "parents": [ "c2f3a4cc771da731f5aedc455e6f6a543acd6e38" ], "author": { "name": "paul", "email": "paul", "time": "Wed Aug 27 06:17:18 2003 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Wed Aug 27 06:17:18 2003 +0000" }, "message": "2003-08-27 Jay Fenlason \u003cfenlason@redhat.com\u003e\n\n\t* lib/Makefile.am: Do not use a lib (libcap) as a dependency\n\t* zebra/Makefile.am: Link in libcap\n" }, { "commit": "edd7c245d3a77012abf801da00d5664ebaa5f749", "tree": "d4fada229d7980fb751f28c9a979aa88de1a0af0", "parents": [ "a159ed935b580ed99111a185734ddd9c973e7691" ], "author": { "name": "paul", "email": "paul", "time": "Wed Jun 04 13:59:38 2003 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Wed Jun 04 13:59:38 2003 +0000" }, "message": "2003-06-04 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* Merge of zebra privileges\n" }, { "commit": "0750d21fcfb034e47f781b09d984bfeec62b56a4", "tree": "d8be8f2b61607f34a74c1897e6abdf3466917ff3", "parents": [ "04a72e593b870688649653f569ebc0e7589b4fdb" ], "author": { "name": "hasso", "email": "hasso", "time": "Sat May 24 21:41:49 2003 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sat May 24 21:41:49 2003 +0000" }, "message": "Revert my http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch patch. Used\nsame idea as in lib/distribute.c to allow extract.pl to pick up commands\nfor vtysh.\n" }, { "commit": "41ce926cb4c0eb7fc07aed25c0452793fc054fc5", "tree": "f30b2ad6b6402a18927119fc22a78bcd023481f8", "parents": [ "73ffb25bec41d729b0dac34d17b6ccd4aa25803b" ], "author": { "name": "paul", "email": "paul", "time": "Sat Apr 19 15:54:03 2003 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Sat Apr 19 15:54:03 2003 +0000" }, "message": "Hasso Tepper\nhttp://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch\nAllows to extract.pl to pickup \"route-map xxx in/out dev\" commands for vtysh\n(ripngd). As lib/if_rmap.[c|h] are used in ripngd only, I moved them to the\nripngd/ directory.\n" }, { "commit": "1b5d019a115bcf69786c870feb93f685ce806ff0", "tree": "21af7fbe108d2555d841291ba6ca089ba7850013", "parents": [ "7ea487bcd2afa7e91874f20a4d9f12369937686d" ], "author": { "name": "paul", "email": "paul", "time": "Mon Mar 17 23:54:15 2003 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Mon Mar 17 23:54:15 2003 +0000" }, "message": "Amir Guindehi \u003camir@datacore.ch\u003e\n--------------------------------\nI\u0027ve attached a small patch for zebra-pj, which adds the installation of\nlibospf.a libzebra.a, libospfapi.a and the needed headers for ospfapi\nclients. the headers get installed to /usr/include/ospfd/* and\n/usr/include/ospfapi.\n" }, { "commit": "718e3744195351130f4ce7dbe0613f4b3e23df93", "tree": "bac2ad39971cd43f31241ef123bd4e470f695ac9", "parents": [], "author": { "name": "paul", "email": "paul", "time": "Fri Dec 13 20:15:29 2002 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Dec 13 20:15:29 2002 +0000" }, "message": "Initial revision\n" } ] }