)]}'
{
  "log": [
    {
      "commit": "f52d13cb2e8e7197934d5f241f88647f9b9d78b8",
      "tree": "b0aa01befc07f57ed47e83ac7dfb383284c49d26",
      "parents": [
        "c05612b9a702d0f49c379c92deb6daab55372aea"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Oct 01 17:38:06 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Oct 01 17:38:06 2005 +0000"
      },
      "message": "2005-10-01 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* zebra.h: Declare new functions zebra_route_string() and\n\t  zebra_route_char().\n\t* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New\n\t  functions to map zebra route numbers to strings.\n\t* zebra_vty.c: (route_type_str) Remove obsolete function: use new\n\t  library function zebra_route_string() instead.  Note that there\n\t  are a few differences: for IPv6 routes, we now get \"ripng\" and\n\t  \"ospf6\" instead of the old behavior (\"rip\" and \"ospf\").\n\t  (route_type_char) Remove obsolete function: ues new library function\n\t  zebra_route_char() instead.  Note that there is one difference:\n\t  the old function returned \u0027S\u0027 for a ZEBRA_ROUTE_SYSTEM route,\n\t  whereas the new one returns \u0027X\u0027.\n\t  (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace\n\t  route_type_str() with zebra_route_string().\n\t  (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()\n\t  with zebra_route_char().\n\t* bgp_vty.c: (bgp_config_write_redistribute) Use new library function\n\t  zebra_route_string instead of a local hard-coded table.\n\t* ospf6_asbr.c: Remove local hard-coded tables zroute_name and\n\t  zroute_abname. Change the ZROUTE_NAME macro to use new library\n\t  function zebra_route_string().  Remove the ZROUTE_ABNAME macro.\n\t  (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with\n\t  a call to zebra_route_char(), and be sure to fix the format string,\n\t  since we now have a char instead of a char *.\n\t* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and\n\t  zebra_route_abname.  Note that the zebra_route_name[] table\n\t  contained mixed-case strings, whereas the zebra_route_string()\n\t  function returns lower-case strings.\n\t  (ospf6_zebra_read_ipv6): Change debug message to use new library\n\t  function zebra_route_string() instead of zebra_route_name[].\n\t  (show_zebra): Use new library function zebra_route_string() instead\n\t  of zebra_route_name[].\n\t* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.\n\t  (ospf_redist_string) New function implemented using new library\n\t  function zebra_route_string().  Note that there are a few differences\n\t  in the output that will result: the new function returns strings\n\t  that are lower-case, whereas the old table was mixed case.  Also,\n\t  the old table mapped ZEBRA_ROUTE_OSPF6 to \"OSPFv3\", whereas the\n\t  new function returns \"ospf6\".\n\t* ospfd.h: Remove extern struct message ospf_redistributed_proto[],\n\t  and add extern const char *ospf_redist_string(u_int route_type)\n\t  instead.\n\t* ospf_asbr.c: (ospf_external_info_add) In two messages, use\n\t  ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).\n\t* ospf_vty.c: Remove local hard-coded table distribute_str.\n\t  (config_write_ospf_redistribute,config_write_ospf_distribute): Use\n\t  new library function zebra_route_string() instead of distribute_str[].\n\t* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,\n\t  ospf_redistribute_default_set,ospf_redistribute_check)\n\t  In debug messages, use ospf_redist_string() instead of\n\t  LOOKUP(ospf_redistributed_proto).\n\t* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded\n\t  table str[]. Replace str[] with calls to new library function\n\t  zebra_route_string().\n\t* ripd.c: Remove local hard-coded table route_info[].\n\t  (show_ip_rip) Replace uses of str[] with calls to new library\n\t  functions zebra_route_char and zebra_route_string.\n\t* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded\n\t  table str[].  Replace str[i] with new library function\n\t  zebra_route_string(i).\n\t* ripngd.c: Remove local hard-coded table route_info[].\n\t  (show_ipv6_ripng) Use new library function zebra_route_char() instead\n\t  of table route_info[].\n"
    },
    {
      "commit": "634f9ea20fce82c94407cb677b5487b65bde1973",
      "tree": "32db82e4ae3b0f409d6d06a0fda401f9d5df5cc9",
      "parents": [
        "dfb9a545f8e3500e6a99518193872f526c1f56ba"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Mon Apr 11 15:51:40 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Mon Apr 11 15:51:40 2005 +0000"
      },
      "message": "2005-04-11 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tImplement non-blocking zclient I/O with buffering.\n\t* zclient.h (struct zclient): Add two fields to support non-blocking\n\t  I/O: struct buffer *wb, and struct thread *t_write.\n\t  (zclient_free): Remove function.\n\t  (zebra_redistribute_send): Change 2nd arg from socket fd to\n\t  struct zclient * (needed to support non-blocking I/O and buffering).\n\t  (zclient_send_message): New function to send an arbitrary\n\t  message with non-blocking I/O.\n\t* zclient.c (zclient_new): Create write buffer.\n\t  (zclient_free): Remove unused function.\n\t  (zclient_stop): Must cancel new t_write thread.  Also, reset\n\t  all buffers: ibuf, obuf, and wb.\n\t  (zclient_failed): New helper function for typical error handling.\n\t  (zclient_flush_data): New thread to flush queued data.\n\t  (zclient_send_message): New function to send the message in\n\t  zclient-\u003eobuf to zebra using non-blocking I/O and buffering.\n\t  (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use\n\t  new zclient_send_message function instead of calling writen.\n\t  (zclient_start): Set socket non-blocking.  Also, change 2nd arg\n\t  to zebra_redistribute_send from zclient-\u003esock to zclient.\n\t  (zebra_redistribute_send): Change 2nd arg to struct zclient *.\n\t  Can now use zclient-\u003eobuf to assemble the message instead of\n\t  allocating a temporary stream.  And call zclient_send_message to\n\t  send the message instead of writen.\n\t  (zclient_read): Convert to support non-blocking I/O by using\n\t  stream_read_try instead of deprecated stream_read.\n\t  (zclient_redistribute): Change 2nd arg to zebra_redistribute_send\n\t  from zclient-\u003esock to zclient.\n\t* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):\n\t  Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t  to zclient.\n\t* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead\n\t  of writen.\n\t* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,\n\t  rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send\n\t  from zclient-\u003esock to zclient.\n\t* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):\n\t  Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t  to zclient.\n\t* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):\n\t  The 2nd arg to zebra_redistribute_send is now zclient instead of\n\t  zclient-\u003esock.\n\t* isis_zebra.h (isis_zebra_finish): Remove declaration of unused\n\t  function.\n\t* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message\n\t  to send the message to zebra instead of calling writen directly, since\n\t  zclient_send_message understands non-blocking I/O and will manage\n\t  the buffer queue appropriately.\n\t  (isis_zebra_finish): Remove unused function, particularly since\n\t  the zclient_free function has been removed.\n"
    },
    {
      "commit": "d2fc88962a9a494ecb34167871bb9e7273a25d33",
      "tree": "304a1c1a744972bc10b1f677a134907c404b361d",
      "parents": [
        "386e61502d391adb985ac1487825349ec85e6a8c"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Apr 02 18:38:43 2005 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Apr 02 18:38:43 2005 +0000"
      },
      "message": "2005-04-02 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tFix problems when netlink interfaces are renamed (same ifindex used\n\tfor a new interface).  Start cleaning up some problems with the way\n\tinterface names are handled.\n\t* interface.c: (if_new_intern_ifindex) Remove obsolete function.\n\t  (if_delete_update) After distributing the interface deletion message,\n\t  set ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t  (if_dump_vty) Detect pseudo interface by checking if ifp-\u003eifindex is\n\t  IFINDEX_INTERNAL.\n\t  (zebra_interface) Check return code from interface_cmd.func.\n\t  Do not set internal ifindex values to if_new_intern_ifindex(),\n\t  since we now use IFINDEX_INTERNAL for all pseudo interfaces.\n\t* kernel_socket.c: (ifm_read) Fix code and comments to reflect that\n\t  all internal interfaces now have ifp-\u003eifindex set to IFINDEX_INTERNAL.\n        * rt_netlink.c: (set_ifindex) New function used to update ifp-\u003eifindex.\n\t  Detects interface rename events by checking if that ifindex is already\n\t  being used.  If it is, delete the old interface before assigning\n\t  the ifindex to the new interface.\n\t  (netlink_interface, netlink_link_change) Call set_ifindex to update\n\t  the ifindex.\n\t* if.h: Remove define for IFINDEX_INTERNBASE and add define\n\t  IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-\n\t  interfaces should have ifindex set to 0.\n\t  (if_new) Remove function.\n\t  (if_delete_retain) New function to delete an interface without\n\t  removing from iflist and freeing the structure.\n\t  (ifname2ifindex) New function.\n\t* if.c: (if_new) Remove function (absorb into if_create).\n\t  (if_create) Replace function if_new with call to calloc.\n\t  Set ifp-\u003eifindex to IFINDEX_INTERNAL.  Fix off-by-one error\n\t  in assert to check length of interface name.  Add error message\n\t  if interface with this name already exists.\n\t  (if_delete_retain) New function to delete an interface without\n\t  removing from iflist and freeing the structure.\n\t  (if_delete) Implement with help of if_delete_retain.\n\t  (ifindex2ifname) Reimplement using if_lookup_by_index.\n\t  (ifname2ifindex) New function to complement ifindex2ifname.\n\t  (interface) The interface command should check the name length\n\t  and fail with a warning message if it is too long.\n\t  (no_interface) Fix spelling in warning message.\n\t  (if_nametoindex) Reimplement using if_lookup_by_name.\n\t  (if_indextoname, ifaddr_ipv4_lookup) Reimplement using\n\t  if_lookup_by_index.\n\t* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp-\u003eifindex\n\t  to IFINDEX_INTERNAL.\n\t* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead\n\t  of if_delete, since it is generally not safe to remove interface\n\t  structures.  After deleting, set ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t  (zebra_interface_if_lookup) Tighten up code.\n\t* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function\n\t  was commented out.  But this is not safe: we should at least update\n\t  the ifindex when the interface is deleted.  So the new version\n\t  updates the interface status and sets ifp-\u003eifindex to\n\t  IFINDEX_INTERNAL.\n\t  (ospf6_zebra_route_update) Use if_indextoname properly.\n\t* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface\n\t  flags to help with debugging.\n\t* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp-\u003eifindex\n\t  to IFINDEX_INTERNAL.\n\t  (zebra_interface_if_lookup) Make function static.  Tighten up code.\n\t* rip_interface.c: (rip_interface_delete) After deleting, set\n\t  ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t* ripng_interface.c: (ripng_interface_delete) After deleting, set\n\t  ifp-\u003eifindex to IFINDEX_INTERNAL.\n"
    },
    {
      "commit": "c1ba9e8a8ac0447e6f33d50b4b9e7a1e68307bf1",
      "tree": "cff477f00b68f3fe7db18cfa384aac90825c96ab",
      "parents": [
        "719e97414a7ca1a4d49d72816b9e1bd2155d157d"
      ],
      "author": {
        "name": "jardin",
        "email": "jardin",
        "time": "Wed Mar 02 22:43:26 2005 +0000"
      },
      "committer": {
        "name": "jardin",
        "email": "jardin",
        "time": "Wed Mar 02 22:43:26 2005 +0000"
      },
      "message": "Fix segfault when ospf6_create() is not called yet.\nThanks to Mohit Thakur.\n"
    },
    {
      "commit": "c6487d61a9b7766f69718edbc484a6ad989bdef4",
      "tree": "2a896a8ebdd6e41edcd1b5917ce9dddefbb335fe",
      "parents": [
        "529d65b3db6a2a79cbdf9ca3a1aa915ce5776286"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Dec 24 06:00:11 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Dec 24 06:00:11 2004 +0000"
      },
      "message": "*.c: Change level of debug messages to LOG_DEBUG.\n"
    },
    {
      "commit": "6099b3b56956322567323c11fd698b2328c6826b",
      "tree": "fa537bd0eaa9f7d824f39445eabc928db59050ca",
      "parents": [
        "ae5e24d8678f1e3a60dde58d3382c5ba73d6bb27"
      ],
      "author": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Nov 20 02:06:59 2004 +0000"
      },
      "committer": {
        "name": "ajs",
        "email": "ajs",
        "time": "Sat Nov 20 02:06:59 2004 +0000"
      },
      "message": "2004-11-19 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* global: Replace strerror with safe_strerror.  And vtysh/vtysh.c\n\t  needs to include \"log.h\" to pick up the declaration.\n"
    },
    {
      "commit": "18a6dce6f83dd20caf1f36c8e840868ff0bf6dbd",
      "tree": "ff832cbf6fe2b239bde06268820587bec671ae6d",
      "parents": [
        "a49c0ff6771975eeb1bd7da923a9dc830200cf65"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Oct 03 18:18:34 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Sun Oct 03 18:18:34 2004 +0000"
      },
      "message": "Common router id.\n"
    },
    {
      "commit": "f3f27f60fdfc81fce2944ee89087417b04935663",
      "tree": "4f65dbb37fca42d7f293b8c2e7154aa845bb30cc",
      "parents": [
        "9b29eb75f618ff9896d4ee65ad3cb24eb2f2d02e"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Sep 10 18:07:57 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Sep 10 18:07:57 2004 +0000"
      },
      "message": "Add IS-IS info into array.\n"
    },
    {
      "commit": "049207c31d9b5da023c6c2e3689b771010098f94",
      "tree": "08dd51fe72c455f869b83372e4a6aa1346389426",
      "parents": [
        "4f4795e83fb4ddcc0d19322478e9cc422a60c7c4"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Aug 04 20:02:13 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Wed Aug 04 20:02:13 2004 +0000"
      },
      "message": "SVN revision 907 from Zebra cvs repository.\n"
    },
    {
      "commit": "1203e1c07c444df615605168c72852389e20340c",
      "tree": "2b00b78fe71fc2840837c0ffdb1c308192ceedf4",
      "parents": [
        "b219dea8d67b58db58755f94ea7cb44aa9774f0d"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Jul 23 21:34:27 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Fri Jul 23 21:34:27 2004 +0000"
      },
      "message": "Use ifp-\u003emtu6 in ospf6d and ripngd.\n"
    },
    {
      "commit": "508e53e2eef3eefba4c1aa771529027fd4486ea8",
      "tree": "0e25e1b344a7b8e2c4551cfcb74d5a011dd0865d",
      "parents": [
        "6708fa3c3e6aef369be13f3915698f407107cae2"
      ],
      "author": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue May 18 18:57:06 2004 +0000"
      },
      "committer": {
        "name": "hasso",
        "email": "hasso",
        "time": "Tue May 18 18:57:06 2004 +0000"
      },
      "message": "Ospf6d merge from Zebra repository with added privs stuff and merged\nzclient changes.\n"
    },
    {
      "commit": "0a5893596774554f039222c481d235de0f35d99e",
      "tree": "065ba74422d21193637d6e3f8b52c0eaa09a13bf",
      "parents": [
        "225282994d74f767058886475d80fee95d450eae"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sat May 08 11:48:26 2004 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sat May 08 11:48:26 2004 +0000"
      },
      "message": "2004-05-08 Paul Jakma \u003cpaul@dishone.st\u003e\n\n       * bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes\n         (bgp_interface_address_delete) ditto.\n         (bgp_zebra_announce) ditto.\n         (bgp_zebra_withdraw) ditto.\n       * isis_zebra.c: Sync with zclient changes.\n       * zclient.c (zapi_ipv4_route) Follow Sowmini\u0027s lead and describe\n         message format.\n       * ospf6_zebra.c: Sync to zclient changes\n       * ospf_zebra.c: Sync with lib/zclient changes\n       * rip_zebra.c: sync with zclient changes.\n       * rip_interface.c: ditto.\n       * ripng_{interface,zebra}.c: sync with zclient changes\n\n\n2004-05-08 Sowmini Varadhan \u003csowmini.varadhan@sun.com\u003e\n\n       * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route\n         (zapi_ipv4_delete) ditto.\n         (zapi_ipv4_route) add/delete a route by way of cmd arg.\n         (zapi_ipv6_add) collapsed into zapi_ipv6_route.\n         (zapi_ipv6_delete) ditto.\n         (zapi_ipv6_route) add/delete a route by way of cmd arg.\n         (zebra_interface_address_delete_read) collapsed into\n         zebra_interface_address_read.\n         (zebra_interface_address_delete_read) ditto.\n         (zebra_interface_address_read) read address add/delete messages\n         by way of type argument. Describe command message format.\n         (zebra_interface_add_read) Unconditionally read new ifmtu6 field.\n         Describe command message format.\n         (zebra_interface_state_read) Unconditionally read new ifmtu6 field.\n         (zclient_redistribute_set) Collapsed into zclient_redistribute\n         (zclient_redistribute_unset) ditto\n         (zclient_redistribute) set/unset redistribution.\n         (zclient_redistribute_default_set) Collapsed into\n         zclient_redistribute_default.\n         (zclient_redistribute_default_unset) ditto.\n         (zclient_redistribute_default) Redistribute default set/unset.\n       * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add\n         zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add\n         zclient_redistribute. Ditto for\n         zclient_redistribute_default_{set/unset}.\n"
    },
    {
      "commit": "733e8102dc513a49363c73597fbf9d3fe061acd5",
      "tree": "b2c8adab27a48f8b56a3164ded397ef527afb4e9",
      "parents": [
        "551a8979254b5fc797765d18b4c678fb7419e702"
      ],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Sun May 18 15:26:26 2003 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Sun May 18 15:26:26 2003 +0000"
      },
      "message": "From: Hasso Tepper \u003chasso@estpak.ee\u003e\nSubject: [zebra 19093] [PATCH] Two more fixes\n\n1) From 6Wind patch - show router and interface nodes from ospf6d when\nusing vtysh and don\u0027t show defaults in interface node. Fixes bugzilla\n#14.\n"
    },
    {
      "commit": "718e3744195351130f4ce7dbe0613f4b3e23df93",
      "tree": "bac2ad39971cd43f31241ef123bd4e470f695ac9",
      "parents": [],
      "author": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Dec 13 20:15:29 2002 +0000"
      },
      "committer": {
        "name": "paul",
        "email": "paul",
        "time": "Fri Dec 13 20:15:29 2002 +0000"
      },
      "message": "Initial revision\n"
    }
  ]
}