)]}' { "log": [ { "commit": "72855b16b72e9ad2c7eb0c0bfd8f5985f779608f", "tree": "308f4e057157ded800b1c3e188a5eadf77e693cb", "parents": [ "e97c31aafc013b8b9a0e61cb79ee97a5f1e419bf" ], "author": { "name": "Feng Lu", "email": "lu.feng@6wind.com", "time": "Fri May 22 11:39:54 2015 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed May 27 21:52:25 2015 +0200" }, "message": "ripngd: allow to enable/disable the ECMP feature\n\nIntroduce a new command \"[no] allow-ecmp\" to enable/disable the\nECMP feature in RIPng. By default, ECMP is not allowed.\n\nOnce ECMP is disabled, only one route entry can exist in the list.\n\n* ripng_zebra.c: adjust a debugging information, which shows the number\n of nexthops according to whether ECMP is enabled.\n* ripngd.c: ripng_ecmp_add() will reject the new route if ECMP is not\n allowed and some entry already exists.\n A new configurable command \"allow-ecmp\" is added to control\n whether ECMP is allowed.\n When ECMP is disabled, ripng_ecmp_disable() is called to\n remove the multiple nexthops.\n* ripngd.h: Add a new member \"ecmp\" to \"struct ripng\", indicating whether\n ECMP is allowed or not.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: Nicolas Dichtel \u003cnicolas.dichtel@6wind.com\u003e\nAcked-by: Vincent Jardin \u003cvincent.jardin@6wind.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "e97c31aafc013b8b9a0e61cb79ee97a5f1e419bf", "tree": "d90728aedb147abf0bfa3fe5d4110f8bfa5526cc", "parents": [ "54b88cac24f335414caa875b390d2d78ff4bf9e0" ], "author": { "name": "Feng Lu", "email": "lu.feng@6wind.com", "time": "Fri May 22 11:39:53 2015 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed May 27 21:52:08 2015 +0200" }, "message": "ripngd: add ECMP support\n\n* Each node in the routing table is changed into a list, holding\n the multiple equal-cost paths.\n\n* If one of the multiple entries gets less-preferred (greater\n metric or greater distance), it will be directly deleted instead\n of starting a garbage-collection timer for it.\n The garbage-collection timer is started only when the last entry\n in the list gets INFINITY.\n\n* Some new functions are used to maintain the ECMP list. And hence\n ripng_route_process(), ripng_redistribute_add() and ripng_timeout()\n are significantly simplified.\n\n* ripng_zebra_ipv6_add() and ripng_zebra_ipv6_delete() now can share\n the common code. The common part is moved to ripng_zebra_ipv6_send().\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: Nicolas Dichtel \u003cnicolas.dichtel@6wind.com\u003e\nAcked-by: Vincent Jardin \u003cvincent.jardin@6wind.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "6b0655a25194c7c0331154edaa6124cf783e5e5e", "tree": "c0c7d479f2684531249668210da27a60322ba395", "parents": [ "fdb913aedb5a9807ad60715e8badb4f25d57acea" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Jun 04 06:53:35 2014 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Jun 04 06:58:02 2014 +0200" }, "message": "*: nuke ^L (page feed)\n\nQuagga sources have inherited a slew of Page Feed (^L, \\xC) characters\nfrom ancient history. Among other things, these break patchwork\u0027s\nXML-RPC API because \\xC is not a valid character in XML documents.\n\nNuke them from high orbit.\n\nPatches can be adapted simply by:\n\tsed -e \u0027s%^L%%\u0027 -i filename.patch\n(you can type page feeds in some environments with Ctrl-V Ctrl-L)\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "93079db65cbb678d7fb67f7dd871e24c12b86f09", "tree": "e781a6d0f4c8b60b0df9d78f9b36125f5f027805", "parents": [ "d70ab9dcd8f054ebd5f60a29dbbd9b39f9fe7566" ], "author": { "name": "Matthieu Boutier", "email": "boutier@pps.jussieu.fr", "time": "Thu Feb 09 20:58:07 2012 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Sun Mar 25 17:06:54 2012 +0100" }, "message": "ripngd: Replace redistribution strings with route_types.h defines.\n" }, { "commit": "b4e45f67057be22133b6bec88cdf285d5c8214db", "tree": "80f775047efb255ef573b2e9d3affb1a7caeb6d1", "parents": [ "6eac79a6fed4842e00607c00c445213b51bba377" ], "author": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Mon Dec 05 16:35:14 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Mon Jan 23 14:31:42 2012 +0400" }, "message": "fix zebra protocol after MP-BGP changes\n\nThe previous commits modified both zebra and bgpd for additional\nSAFI field, but not any other routing daemon, which led to zebra\ndaemon crashing with failed assertion.\n" }, { "commit": "7fc626de5f618133ad2a478d13defa3a110b89ea", "tree": "432ff0e4672eabc2ec6b0dcffc22dcc0aee532c8", "parents": [ "66e5cd87194ae6fdd51061a91b4698bc0a652f6b" ], "author": { "name": "Stephen Hemminger", "email": "stephen.hemminger@vyatta.com", "time": "Mon Dec 01 11:10:34 2008 -0800" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Jun 12 17:10:29 2009 +0100" }, "message": "[cleanup] Make command nodes static\n\nThe cmd_nodes used to configure vty, can mostly be static so\n(basic data hiding 101).\n" }, { "commit": "6ac29a51075def99217a4ab1015635db3b3e83ed", "tree": "1152b55eb3a2099c67a0ba8e62d7e41f07e00135", "parents": [ "1423c809cc4ddc2e013ba6264c49a11e5719c6f2" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Fri Aug 15 13:45:30 2008 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Aug 22 19:52:58 2008 +0100" }, "message": "[trivia] finish off static\u0027ification of ospf6d and ripngd\n\n2008-08-15 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* {ospf6d,ripngd}/*: Finish job of marking functions as static, or\n\t exporting declarations for them, to quell warning noise with\n\t Quagga\u0027s GCC default high-level of warning flags. Thus allowing\n\t remaining, more useful warnings to be more easily seen.\n" }, { "commit": "f52d13cb2e8e7197934d5f241f88647f9b9d78b8", "tree": "b0aa01befc07f57ed47e83ac7dfb383284c49d26", "parents": [ "c05612b9a702d0f49c379c92deb6daab55372aea" ], "author": { "name": "ajs", "email": "ajs", "time": "Sat Oct 01 17:38:06 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Sat Oct 01 17:38:06 2005 +0000" }, "message": "2005-10-01 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* zebra.h: Declare new functions zebra_route_string() and\n\t zebra_route_char().\n\t* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New\n\t functions to map zebra route numbers to strings.\n\t* zebra_vty.c: (route_type_str) Remove obsolete function: use new\n\t library function zebra_route_string() instead. Note that there\n\t are a few differences: for IPv6 routes, we now get \"ripng\" and\n\t \"ospf6\" instead of the old behavior (\"rip\" and \"ospf\").\n\t (route_type_char) Remove obsolete function: ues new library function\n\t zebra_route_char() instead. Note that there is one difference:\n\t the old function returned \u0027S\u0027 for a ZEBRA_ROUTE_SYSTEM route,\n\t whereas the new one returns \u0027X\u0027.\n\t (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace\n\t route_type_str() with zebra_route_string().\n\t (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()\n\t with zebra_route_char().\n\t* bgp_vty.c: (bgp_config_write_redistribute) Use new library function\n\t zebra_route_string instead of a local hard-coded table.\n\t* ospf6_asbr.c: Remove local hard-coded tables zroute_name and\n\t zroute_abname. Change the ZROUTE_NAME macro to use new library\n\t function zebra_route_string(). Remove the ZROUTE_ABNAME macro.\n\t (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with\n\t a call to zebra_route_char(), and be sure to fix the format string,\n\t since we now have a char instead of a char *.\n\t* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and\n\t zebra_route_abname. Note that the zebra_route_name[] table\n\t contained mixed-case strings, whereas the zebra_route_string()\n\t function returns lower-case strings.\n\t (ospf6_zebra_read_ipv6): Change debug message to use new library\n\t function zebra_route_string() instead of zebra_route_name[].\n\t (show_zebra): Use new library function zebra_route_string() instead\n\t of zebra_route_name[].\n\t* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.\n\t (ospf_redist_string) New function implemented using new library\n\t function zebra_route_string(). Note that there are a few differences\n\t in the output that will result: the new function returns strings\n\t that are lower-case, whereas the old table was mixed case. Also,\n\t the old table mapped ZEBRA_ROUTE_OSPF6 to \"OSPFv3\", whereas the\n\t new function returns \"ospf6\".\n\t* ospfd.h: Remove extern struct message ospf_redistributed_proto[],\n\t and add extern const char *ospf_redist_string(u_int route_type)\n\t instead.\n\t* ospf_asbr.c: (ospf_external_info_add) In two messages, use\n\t ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).\n\t* ospf_vty.c: Remove local hard-coded table distribute_str.\n\t (config_write_ospf_redistribute,config_write_ospf_distribute): Use\n\t new library function zebra_route_string() instead of distribute_str[].\n\t* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,\n\t ospf_redistribute_default_set,ospf_redistribute_check)\n\t In debug messages, use ospf_redist_string() instead of\n\t LOOKUP(ospf_redistributed_proto).\n\t* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded\n\t table str[]. Replace str[] with calls to new library function\n\t zebra_route_string().\n\t* ripd.c: Remove local hard-coded table route_info[].\n\t (show_ip_rip) Replace uses of str[] with calls to new library\n\t functions zebra_route_char and zebra_route_string.\n\t* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded\n\t table str[]. Replace str[i] with new library function\n\t zebra_route_string(i).\n\t* ripngd.c: Remove local hard-coded table route_info[].\n\t (show_ipv6_ripng) Use new library function zebra_route_char() instead\n\t of table route_info[].\n" }, { "commit": "deba35508e28a3861bb182218bb51af6769b2581", "tree": "04613ed5ea108b58fcc83bf6abd403ed6b841f2f", "parents": [ "be61c4eb59b8df1aab496176d87bb2e1763f185e" ], "author": { "name": "hasso", "email": "hasso", "time": "Sat Aug 27 06:19:39 2005 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sat Aug 27 06:19:39 2005 +0000" }, "message": "\t* ripng_zebra.c, ripngd.[ch]: Pass metric info to the zebra daemon.\n\n\tForwardport from stable branch.\n" }, { "commit": "634f9ea20fce82c94407cb677b5487b65bde1973", "tree": "32db82e4ae3b0f409d6d06a0fda401f9d5df5cc9", "parents": [ "dfb9a545f8e3500e6a99518193872f526c1f56ba" ], "author": { "name": "ajs", "email": "ajs", "time": "Mon Apr 11 15:51:40 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Mon Apr 11 15:51:40 2005 +0000" }, "message": "2005-04-11 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tImplement non-blocking zclient I/O with buffering.\n\t* zclient.h (struct zclient): Add two fields to support non-blocking\n\t I/O: struct buffer *wb, and struct thread *t_write.\n\t (zclient_free): Remove function.\n\t (zebra_redistribute_send): Change 2nd arg from socket fd to\n\t struct zclient * (needed to support non-blocking I/O and buffering).\n\t (zclient_send_message): New function to send an arbitrary\n\t message with non-blocking I/O.\n\t* zclient.c (zclient_new): Create write buffer.\n\t (zclient_free): Remove unused function.\n\t (zclient_stop): Must cancel new t_write thread. Also, reset\n\t all buffers: ibuf, obuf, and wb.\n\t (zclient_failed): New helper function for typical error handling.\n\t (zclient_flush_data): New thread to flush queued data.\n\t (zclient_send_message): New function to send the message in\n\t zclient-\u003eobuf to zebra using non-blocking I/O and buffering.\n\t (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use\n\t new zclient_send_message function instead of calling writen.\n\t (zclient_start): Set socket non-blocking. Also, change 2nd arg\n\t to zebra_redistribute_send from zclient-\u003esock to zclient.\n\t (zebra_redistribute_send): Change 2nd arg to struct zclient *.\n\t Can now use zclient-\u003eobuf to assemble the message instead of\n\t allocating a temporary stream. And call zclient_send_message to\n\t send the message instead of writen.\n\t (zclient_read): Convert to support non-blocking I/O by using\n\t stream_read_try instead of deprecated stream_read.\n\t (zclient_redistribute): Change 2nd arg to zebra_redistribute_send\n\t from zclient-\u003esock to zclient.\n\t* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):\n\t Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t to zclient.\n\t* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead\n\t of writen.\n\t* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,\n\t rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send\n\t from zclient-\u003esock to zclient.\n\t* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):\n\t Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t to zclient.\n\t* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):\n\t The 2nd arg to zebra_redistribute_send is now zclient instead of\n\t zclient-\u003esock.\n\t* isis_zebra.h (isis_zebra_finish): Remove declaration of unused\n\t function.\n\t* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message\n\t to send the message to zebra instead of calling writen directly, since\n\t zclient_send_message understands non-blocking I/O and will manage\n\t the buffer queue appropriately.\n\t (isis_zebra_finish): Remove unused function, particularly since\n\t the zclient_free function has been removed.\n" }, { "commit": "98b718a9d2aa7a3324c553944e26914fe090b87a", "tree": "13a7002a3265a2debfa411a2a2c544dbde972f0a", "parents": [ "a149411b85bbe74cde47d82193026b9401b29de0" ], "author": { "name": "hasso", "email": "hasso", "time": "Mon Oct 11 12:57:57 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Mon Oct 11 12:57:57 2004 +0000" }, "message": "Sync with changes in lib. Make more strings const.\n" }, { "commit": "7a1d583c02253c53605f310d1afcc9f1c8e15b7b", "tree": "38652398c60620d195bb6b74f97ad4770af559e5", "parents": [ "27a43a81004b620e571f71aa1ea4db182c607862" ], "author": { "name": "hasso", "email": "hasso", "time": "Fri Oct 08 06:32:23 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Fri Oct 08 06:32:23 2004 +0000" }, "message": "Only warning left is the known lvalue problem in ripng_nexthop.c.\n" }, { "commit": "0a5893596774554f039222c481d235de0f35d99e", "tree": "065ba74422d21193637d6e3f8b52c0eaa09a13bf", "parents": [ "225282994d74f767058886475d80fee95d450eae" ], "author": { "name": "paul", "email": "paul", "time": "Sat May 08 11:48:26 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Sat May 08 11:48:26 2004 +0000" }, "message": "2004-05-08 Paul Jakma \u003cpaul@dishone.st\u003e\n\n * bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes\n (bgp_interface_address_delete) ditto.\n (bgp_zebra_announce) ditto.\n (bgp_zebra_withdraw) ditto.\n * isis_zebra.c: Sync with zclient changes.\n * zclient.c (zapi_ipv4_route) Follow Sowmini\u0027s lead and describe\n message format.\n * ospf6_zebra.c: Sync to zclient changes\n * ospf_zebra.c: Sync with lib/zclient changes\n * rip_zebra.c: sync with zclient changes.\n * rip_interface.c: ditto.\n * ripng_{interface,zebra}.c: sync with zclient changes\n\n\n2004-05-08 Sowmini Varadhan \u003csowmini.varadhan@sun.com\u003e\n\n * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route\n (zapi_ipv4_delete) ditto.\n (zapi_ipv4_route) add/delete a route by way of cmd arg.\n (zapi_ipv6_add) collapsed into zapi_ipv6_route.\n (zapi_ipv6_delete) ditto.\n (zapi_ipv6_route) add/delete a route by way of cmd arg.\n (zebra_interface_address_delete_read) collapsed into\n zebra_interface_address_read.\n (zebra_interface_address_delete_read) ditto.\n (zebra_interface_address_read) read address add/delete messages\n by way of type argument. Describe command message format.\n (zebra_interface_add_read) Unconditionally read new ifmtu6 field.\n Describe command message format.\n (zebra_interface_state_read) Unconditionally read new ifmtu6 field.\n (zclient_redistribute_set) Collapsed into zclient_redistribute\n (zclient_redistribute_unset) ditto\n (zclient_redistribute) set/unset redistribution.\n (zclient_redistribute_default_set) Collapsed into\n zclient_redistribute_default.\n (zclient_redistribute_default_unset) ditto.\n (zclient_redistribute_default) Redistribute default set/unset.\n * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add\n zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add\n zclient_redistribute. Ditto for\n zclient_redistribute_default_{set/unset}.\n" }, { "commit": "66e31693289d956f59758155faf86cab88853bae", "tree": "ecb9a5e77473abf776b9c97c661eef4be30abf34", "parents": [ "42ed9da7b646ce4b05ffafcae805a3018fb6f164" ], "author": { "name": "hasso", "email": "hasso", "time": "Sat Mar 20 19:33:06 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sat Mar 20 19:33:06 2004 +0000" }, "message": "*** empty log message ***\n" }, { "commit": "a94434b69197e074569d7579126074e9cb7212a5", "tree": "b63c34ee20e8e6b57796ee591d4569407140047d", "parents": [ "dd55f9eb73347cb2bb7f8dc0f8108b21a733c9b4" ], "author": { "name": "hasso", "email": "hasso", "time": "Sun May 25 17:10:12 2003 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sun May 25 17:10:12 2003 +0000" }, "message": "Ripngd part of 6Wind patch.\n" }, { "commit": "718e3744195351130f4ce7dbe0613f4b3e23df93", "tree": "bac2ad39971cd43f31241ef123bd4e470f695ac9", "parents": [], "author": { "name": "paul", "email": "paul", "time": "Fri Dec 13 20:15:29 2002 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Dec 13 20:15:29 2002 +0000" }, "message": "Initial revision\n" } ] }