)]}' { "log": [ { "commit": "88d37b902bc8127379d3293b9671aa6a11479c23", "tree": "33ff1c38d47bfb7f940d56c53727aa9db31ddb40", "parents": [ "9511633e08ff15c23608983fdc1bc735d427332e" ], "author": { "name": "Stephen Hemminger", "email": "stephen@networkplumber.org", "time": "Mon Nov 03 01:20:09 2014 +0000" }, "committer": { "name": "Vincent JARDIN", "email": "vincent.jardin@6wind.com", "time": "Mon Nov 03 06:51:10 2014 +0100" }, "message": "make some structures constant.\n\nThese pre-initialized arrays are not modified.\n\nSigned-off-by: Stephen Hemminger \u003cstephen@networkplumber.org\u003e\nAcked-by: Feng Lu \u003clu.feng@6wind.com\u003e\n" }, { "commit": "7aa9dcef80b2ce50ecaa77653d87c8b84e009c49", "tree": "bd4a8d881336a1551146725d7ae06b3e68553e4d", "parents": [ "010ebbbca6396f272cc2d50d147dd922dda68213" ], "author": { "name": "Paul Jakma", "email": "paul@opensourcerouting.org", "time": "Fri Sep 19 14:42:23 2014 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Tue Sep 23 16:32:34 2014 +0100" }, "message": "Fix most compiler warnings in default GCC build.\n\nFix lots of warnings. Some const and type-pun breaks strict-aliasing\nwarnings left but much reduced.\n\n* bgp_advertise.h: (struct bgp_advertise_fifo) is functionally identical to\n (struct fifo), so just use that. Makes it clearer the beginning of\n (struct bgp_advertise) is compatible with with (struct fifo), which seems\n to be enough for gcc.\n Add a BGP_ADV_FIFO_HEAD macro to contain the right cast to try shut up\n type-punning breaks strict aliasing warnings.\n* bgp_packet.c: Use BGP_ADV_FIFO_HEAD.\n (bgp_route_refresh_receive) fix an interesting logic error in\n (!ok || (ret !\u003d BLAH)) where ret is only well-defined if ok.\n* bgp_vty.c: Peer commands should use bgp_vty_return to set their return.\n* jhash.{c,h}: Can take const on * args without adding issues \u0026 fix warnings.\n* libospf.h: LSA sequence numbers use the unsigned range of values, and\n constants need to be set to unsigned, or it causes warnings in ospf6d.\n* md5.h: signedness of caddr_t is implementation specific, change to an\n explicit (uint_8 *), fix sign/unsigned comparison warnings.\n* vty.c: (vty_log_fixed) const on level is well-intentioned, but not going\n to fly given iov_base.\n* workqueue.c: ALL_LIST_ELEMENTS_RO tests for null pointer, which is always\n true for address of static variable. Correct but pointless warning in\n this case, but use a 2nd pointer to shut it up.\n* ospf6_route.h: Add a comment about the use of (struct prefix) to stuff 2\n different 32 bit IDs into in (struct ospf6_route), and the resulting\n type-pun strict-alias breakage warnings this causes. Need to use 2\n different fields to fix that warning?\n\ngeneral:\n\n* remove unused variables, other than a few cases where they serve a\n sufficiently useful documentary purpose (e.g. for code that needs\n fixing), or they\u0027re required dummies. In those cases, try mark them as\n unused.\n* Remove dead code that can\u0027t be reached.\n* Quite a few \u0027no ...\u0027 forms of vty commands take arguments, but do not\n check the argument matches the command being negated. E.g., should\n \u0027distance X \u003cprefix\u003e\u0027 succeed if previously \u0027distance Y \u003cprefix\u003e\u0027 was set?\n Or should it be required that the distance match the previously configured\n distance for the prefix?\n Ultimately, probably better to be strict about this. However, changing\n from slack to strict might expose problems in command aliases and tools.\n* Fix uninitialised use of variables.\n* Fix sign/unsigned comparison warnings by making signedness of types consistent.\n* Mark functions as static where their use is restricted to the same compilation\n unit.\n* Add required headers\n* Move constants defined in headers into code.\n* remove dead, unused functions that have no debug purpose.\n" }, { "commit": "0b74a0a5db7bcf65bf68c44b547b02b1310b5cdb", "tree": "d767a50f61d6dddaf145e8273e859fb29d74687f", "parents": [ "b397cf4f0fc484c5ebfc8a680090055c8e6cbe32" ], "author": { "name": "Lu Feng", "email": "lu.feng@6wind.com", "time": "Fri Jul 18 06:13:19 2014 +0000" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Mon Sep 15 18:37:08 2014 +0200" }, "message": "ripd: allow to enable/disable the ECMP feature\n\nIntroduce a new command \"[no] allow-ecmp\" to enable/disable the\nECMP feature in RIP. By default, ECMP is not allowed.\n\nOnce ECMP is disabled, only one route entry can exist in the list.\n\n* rip_zebra.c: adjust a debugging information, which shows the number\n of nexthops according to whether ECMP is enabled.\n* ripd.c: rip_ecmp_add() will reject the new route if ECMP is not\n allowed and some entry already exists.\n A new configurable command \"allow-ecmp\" is added to control\n whether ECMP is allowed.\n When ECMP is disabled, rip_ecmp_disable() is called to\n remove the multiple nexthops.\n* ripd.h: Add a new member \"ecmp\" to \"struct rip\", indicating whether\n ECMP is allowed or not.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "b397cf4f0fc484c5ebfc8a680090055c8e6cbe32", "tree": "b1fe14811932e92ac87f7ddcad8660061b15cd51", "parents": [ "1520e4748129c4eb97ac3090bcc97149a1900611" ], "author": { "name": "Lu Feng", "email": "lu.feng@6wind.com", "time": "Fri Jul 18 06:13:18 2014 +0000" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Mon Sep 15 18:36:54 2014 +0200" }, "message": "ripd: add ECMP support\n\n* Each node in the routing table is changed into a list, holding\n the multiple equal-cost paths.\n\n* If one of the multiple entries gets less-preferred (greater\n metric or greater distance), it will be directly deleted instead\n of starting a garbage-collection timer for it.\n The garbage-collection timer is started only when the last entry\n in the list gets INFINITY.\n\n* Some new functions are used to maintain the ECMP list. And hence\n rip_rte_process(), rip_redistribute_add() and rip_timeout() are\n significantly simplified.\n\n* rip_zebra_ipv4_add() and rip_zebra_ipv4_delete() now can share\n the common code. The common part is moved to rip_zebra_ipv4_send().\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "342a31bfda21616209366679ac522471e5772a2f", "tree": "359be93388f4efe5283b291f322c78c9e2389f0f", "parents": [ "052573ee2319b21657a79e1b76a5c801701fa38c" ], "author": { "name": "Lu Feng", "email": "lu.feng@6wind.com", "time": "Wed Jun 25 07:43:15 2014 +0000" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Jul 02 19:30:20 2014 +0200" }, "message": "ripd: use only one constant for derivation\n\nRIP_MAX_RTE is defined in ripd.h as 25 but is in fact the\nresult of a formula. More over it is not used in the code:\nthe code itself includes the fomula. This makes it un-clear\nfor maintenance.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nReviewed-by: Alain Ritoux \u003calain.ritoux@6wind.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "6b0655a25194c7c0331154edaa6124cf783e5e5e", "tree": "c0c7d479f2684531249668210da27a60322ba395", "parents": [ "fdb913aedb5a9807ad60715e8badb4f25d57acea" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Jun 04 06:53:35 2014 +0200" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Wed Jun 04 06:58:02 2014 +0200" }, "message": "*: nuke ^L (page feed)\n\nQuagga sources have inherited a slew of Page Feed (^L, \\xC) characters\nfrom ancient history. Among other things, these break patchwork\u0027s\nXML-RPC API because \\xC is not a valid character in XML documents.\n\nNuke them from high orbit.\n\nPatches can be adapted simply by:\n\tsed -e \u0027s%^L%%\u0027 -i filename.patch\n(you can type page feeds in some environments with Ctrl-V Ctrl-L)\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "7b3b98ae3ecdad20cf5cebd2a6532aee17184d95", "tree": "e95cee3c81dec96641e6c7497f69faa3134a5085", "parents": [ "224e7e515747b74dd6d3610570a64b9726a27722" ], "author": { "name": "Lu Feng", "email": "lu.feng@6wind.com", "time": "Mon Apr 14 08:09:29 2014 +0000" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Jun 03 15:32:11 2014 +0200" }, "message": "ripd \u0026 ripngd: avoid the zero interface metric\n\nThe interface metric is initialized to 0 in the commit db19c85:\nzebra: set metric for directly connected routes via netlink to 0\n\nRipd and ripngd must be aware of it and avoid increase the\nroute metric by 0.\n\nSigned-off-by: Feng Lu \u003clu.feng@6wind.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "cd40b329a2e4da882bcad0431c048c876bbeafbd", "tree": "cfbdec5a7559c6d3e56766797896a18809aa1746", "parents": [ "e712d0e3667ffad8109ef8bce3ce01927ee95bb7" ], "author": { "name": "Christian Franke", "email": "chris@opensourcerouting.org", "time": "Mon Sep 30 12:27:51 2013 +0000" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Apr 01 20:21:41 2014 +0200" }, "message": "lib/command.c: rewrite command matching/parsing\n\nAdd support for keyword commands.\n\nIncludes new documentation for DEFUN() in lib/command.h, for preexisting\nfeatures as well as new keyword specification.\n\nSigned-off-by: Christian Franke \u003cchris@opensourcerouting.org\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "b68da446e977f8069fb72bce73402e2234ffc1d9", "tree": "6c310ad8fdccf588fcc2ad8b6f03a4602d1b2a13", "parents": [ "8df55970b64984e5071afd510caad5e778569bc1" ], "author": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Thu Feb 28 22:17:00 2013 +0100" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Apr 09 22:33:19 2013 +0200" }, "message": "ripd: correctly redistribute ifindex routes (BZ#664)\n\nripd had a check to restrict metric 0 to only directly connected routes.\nThis check was implemented by checking against Connected as route type.\nThis is, however, incorrect -- all routes that directly use an interface\nwithout a nexthop should be treated as directly connected and passed off\nwith metric 0.\n\nripngd does not posess such a check and was not touched.\n\nReported-by: Sean Fulton \u003csean@gcnpublishing.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "837d16ccbe0fca413f8927da6a34b1e97ccada8a", "tree": "7aed5a517b619c03d11bf567f6a14cda6f8f5efe", "parents": [ "655071f44aab42e89bcece3a93da456fdd0d913a" ], "author": { "name": "Balaji.G", "email": "balajig81@gmail.com", "time": "Wed Sep 26 14:09:10 2012 +0530" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Thu Oct 25 10:15:59 2012 -0700" }, "message": "*: use array_size() helper macro\n\nUse the array_size() helper macro. Replaces several instances of local\nmacros with the same definition.\n\nReviewed-by: Scott Feldman \u003csfeldma@cumulusnetworks.com\u003e\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "bb2315f2878da685fae094aece13409667d21f97", "tree": "b8625a91196bc54e4f4f253711c611bd9212e638", "parents": [ "1b54f798d3cc359bec036db83c1c9bfab75d1244" ], "author": { "name": "Nick Hilliard", "email": "nick@inex.ie", "time": "Sat Aug 18 15:10:57 2012 +0000" }, "committer": { "name": "David Lamparter", "email": "equinox@opensourcerouting.org", "time": "Tue Sep 25 06:03:46 2012 +0200" }, "message": "ripd: clear sockaddr_in before using\n\nripd_create_socket() failed in bind() on Mac OS X 10.7 since there was garbage\nin unused fields of struct sockaddr_in.\n\n* ripd/ripd.c: zero out struct sockaddr_sin from before filling.\n\nSigned-off-by: David Lamparter \u003cequinox@opensourcerouting.org\u003e\n" }, { "commit": "8046ba6ec4d6e87bf8da6563c0f3e5e66c4652b3", "tree": "1b38b2eae4e1cee042f96a42217b14647159bf0f", "parents": [ "0ff4b9c96793898429052de576d8da368e48997e" ], "author": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Thu May 31 13:30:28 2012 +0200" }, "committer": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Mon Jun 25 19:03:23 2012 +0200" }, "message": "snmp: let handlers accept OID from a lesser prefix\n\nMost table handlers do not expect to be given an OID whose prefix is\noutside what they can handle. This is not a problem with the SMUX\nimplementation since it always correct the OID such that the prefix\nmatches. However, this is not the case for the AgentX\nimplementation. A new function, smux_header_table() is used to do this\nnormalization.\n" }, { "commit": "08d7f6533ecc0f935a76918c462982004534864d", "tree": "0e67590a8a2aba551439c46bfa8b33d7fba4feb7", "parents": [ "6b1e37f8537fa2a4560de32e83ca5089763e2d39" ], "author": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Tue May 22 22:29:17 2012 +0200" }, "committer": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Mon Jun 25 19:03:23 2012 +0200" }, "message": "build: use net-snmp-config to configure NetSNMP\n\nThe correct method to link to NetSNMP is to use net-snmp-config (which\nis like pkg-config). Explicit link to libcrypto is also dropped\n(NetSNMP libs are linked to libcrypto, no need to link Quagga to\nit). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a\nbug in configure.ac, it was properly populated.\n" }, { "commit": "6b1e37f8537fa2a4560de32e83ca5089763e2d39", "tree": "941dfbfbe62981ec214ac1e5a3f607368f4bf1d4", "parents": [ "9e7a548ce421660b0d22bfeb90c2b2b53742aac7" ], "author": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Tue May 22 22:15:20 2012 +0200" }, "committer": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Mon Jun 25 19:03:23 2012 +0200" }, "message": "build: only define HAVE_SNMP\n\nNetSNMP is the only SNMP implementation for Quagga. We don\u0027t need two\ndifferent symbols.\n" }, { "commit": "9e7a548ce421660b0d22bfeb90c2b2b53742aac7", "tree": "4c962403808f98806781fb4ad15594152bc1effa", "parents": [ "a47c5838e9f445ab887ad927706b11ccbb181364" ], "author": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Tue May 22 14:32:22 2012 +0200" }, "committer": { "name": "Vincent Bernat", "email": "bernat@luffy.cx", "time": "Mon Jun 25 19:03:23 2012 +0200" }, "message": "build: allow configure and build in a separate directory\n\nSome .h files in lib/ are autogenerated. The search path should\ninclude the build directory and the source directory. They usually\nmatch but sometimes, they may be different. For example:\n\n $ mkdir build\n $ cd build\n $ ../configure\n $ make\n" }, { "commit": "9c58fbd7d7658055c2b3074489c6d338448d88e9", "tree": "a085d8bc6ca9e5f5bc4ed9c186f89a207c59e3f8", "parents": [ "93079db65cbb678d7fb67f7dd871e24c12b86f09" ], "author": { "name": "Matthieu Boutier", "email": "boutier@pps.jussieu.fr", "time": "Thu Feb 09 21:51:17 2012 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Sun Mar 25 17:06:54 2012 +0100" }, "message": "ripd: add babel for redistribution.\n" }, { "commit": "b4e45f67057be22133b6bec88cdf285d5c8214db", "tree": "80f775047efb255ef573b2e9d3affb1a7caeb6d1", "parents": [ "6eac79a6fed4842e00607c00c445213b51bba377" ], "author": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Mon Dec 05 16:35:14 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Mon Jan 23 14:31:42 2012 +0400" }, "message": "fix zebra protocol after MP-BGP changes\n\nThe previous commits modified both zebra and bgpd for additional\nSAFI field, but not any other routing daemon, which led to zebra\ndaemon crashing with failed assertion.\n" }, { "commit": "05e54ee3df973194f2a00e3ea0b1da7bebc71fd6", "tree": "c07e2bbad0c55fe03eb2975b98f121de6ae55707", "parents": [ "ad8d4802a3078de694539fa9bae12322fc82042f" ], "author": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Sat Dec 03 17:45:17 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Tue Dec 13 14:27:01 2011 +0400" }, "message": "build: delete .cvsignore files\n" }, { "commit": "b51146856e660bcec723f535c17dc1c38b2f6efc", "tree": "8f501c98b3714e1d5ed381bd4d82fece4106aa8c", "parents": [ "2f658673fa477b58ed38caf94c156c95948de382" ], "author": { "name": "Vyacheslav Trushkin", "email": "me@dogonthesun.net", "time": "Fri Nov 25 18:51:48 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Tue Dec 13 14:26:28 2011 +0400" }, "message": "quagga: option \"-z\" (\"--socket \u003cpath\u003e\") added\n\nAll daemons modified to support custom path to zserv\nsocket.\n\nlib: generalize a zclient connection\n\nzclient_socket_connect added. zclient_socket and\nzclient_socket_un were hidden under static expression.\n\"zclient_serv_path_set\" modified.\n" }, { "commit": "69bf3a39931ce61a92fb04d8888b4655fd5620a2", "tree": "e49dae20b1dbc0d1ee37121cd45c75d94290bdd1", "parents": [ "ea4021984f9eec3f2a85551ae0822e1dff0ed2bc" ], "author": { "name": "Dmitrij Tejblum", "email": "tejblum@yandex-team.ru", "time": "Thu Aug 18 20:22:17 2011 +0400" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Tue Sep 27 21:37:35 2011 +0400" }, "message": "lib: simplify interface of setsockopt_multicast_ipv4().\n\n* sockopt.[ch] (setsockopt_ipv4_multicast): ifindex is now mandatory (all\n non-ancient OSes can use it anyway), and if_addr parameter (the address\n of the interface) is now gone. (setsockopt_ipv4_multicast_if):\n IP_MULTICAST_IF processing moved to this new function\n\n* ospf_network.c (ospf_if_add_allspfrouters, ospf_if_drop_allspfrouters,\n ospf_if_add_alldrouters, ospf_if_drop_alldrouters, ospf_if_ipmulticast),\n rip_interface.c (ipv4_multicast_join, ipv4_multicast_leave,\n rip_interface_new): adapt to the new interface\n" }, { "commit": "0fa0335316ce14a79ea4bbb0c40e1322c9941dd3", "tree": "10c01d97fd76b037fc8f8d321eb70d62ff6e29b5", "parents": [ "6e22b9017e1ae2ce61c383b1b2b63973207704ac" ], "author": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Thu Feb 24 13:52:14 2011 +0300" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Thu Feb 24 13:52:14 2011 +0300" }, "message": "ripd: resolve debug statements issue (bug 442)\n\n...A nasty bug, if you forgot to disable debugging, stored the config\nand reboot your machine - if you really depend on ripd, then the machine\nwill not fully come back on the network, because ripd fails.\n" }, { "commit": "2c2397059d4d4177ed4636c08aa476a138425dc8", "tree": "c32e11332baa9b1ff9efed4f8b363f9118bdc964", "parents": [ "e580216e1ba2db506d1942e382852d07973a5fad" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Dec 10 19:16:05 2009 +0300" }, "committer": { "name": "Denis Ovsienko", "email": "infrastation@yandex.ru", "time": "Thu Dec 10 19:16:05 2009 +0300" }, "message": "ripd: fix compiler warnings\n\n* ripd/rip_interface.c\n * rip_request_neighbor(): comment out, unused\n * rip_request_neighbor_all(): idem\n * rip_interface_up(): Cast flags otherwise compiler complains\n about %lld not matching uint64_t on 64 bit x86. Print in hex\n since flags are bit field.\n * rip_interface_add(): idem\n * rip_interface_delete(): idem\n* ripd/rip_zebra.c\n * rip_redistribute_set(): comment out, unused\n* ripd/ripd.h\n * rip_redistribute_check(): move prototype here so compiler\n can check function against prototype\n* ripd/ripd.c\n * rip_update_default_metric(): comment out, unused\n" }, { "commit": "065de90380c88d9fcc116627f714bed9984c2723", "tree": "79061a2699e0dc3e87c218b3b57c2f0577d5a69a", "parents": [ "5bd5881838c22e075c3d0c245a8952a55e9dca38" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Fri Aug 07 11:13:49 2009 -0700" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Thu Aug 13 10:21:13 2009 +0100" }, "message": "all: check return value from daemon() call\n\n* */*main.c: (main) Current versions of Gcc warn if the return value for\n daemon() is not checked. So add a simple test and exit on failure.\n\n" }, { "commit": "30d205909c5a81cc306b161c16abff0fd7f566a7", "tree": "6f7532a4336cf601bbeab07d2669639a05409dfd", "parents": [ "d023aec49f70156d2ed894a8fba65bcfa221ff02" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Tue Jul 28 11:58:51 2009 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Tue Jul 28 11:58:51 2009 +0100" }, "message": "[global] interface flags format warnings\n\n*/*: ifp-\u003eflags is 64 bit unsigned which can not be handled by %l on 32\n bit architectures - requires %ll and the appropriate cast.\n" }, { "commit": "78b31d5cf511c400d7f09158a3d8863f1bf63c2a", "tree": "b47a513278c23f7034c5ffa885facc1963d3a52a", "parents": [ "9a1a331d63ae9db1912a1edb48c5c176454562f8" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Tue Jul 21 16:27:26 2009 -0700" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Mon Jul 27 12:37:26 2009 +0100" }, "message": "ripd: set IP TOS for control socket\n\n* ripd.c: (rip_create_socket) RIP packets should go out with Type Of Service\n (DSCP) set to Internet control (like OSPF and BGP).\n" }, { "commit": "82f5ee1ead0aa83f83f918abfc3f5071741a56e5", "tree": "bea94b32379b8f1b3f69db6d0c3404ccb115c7fa", "parents": [ "94fc1dd41cd0267acb9c67dd3dcf1e64ef8713af" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Tue Apr 07 15:00:46 2009 -0700" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Thu Jun 18 20:18:27 2009 +0100" }, "message": "[ripd] Ignore non-running interfaces in rip status\n\nVyatta Bug 3999\n" }, { "commit": "7fc626de5f618133ad2a478d13defa3a110b89ea", "tree": "432ff0e4672eabc2ec6b0dcffc22dcc0aee532c8", "parents": [ "66e5cd87194ae6fdd51061a91b4698bc0a652f6b" ], "author": { "name": "Stephen Hemminger", "email": "stephen.hemminger@vyatta.com", "time": "Mon Dec 01 11:10:34 2008 -0800" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Jun 12 17:10:29 2009 +0100" }, "message": "[cleanup] Make command nodes static\n\nThe cmd_nodes used to configure vty, can mostly be static so\n(basic data hiding 101).\n" }, { "commit": "393deb9bd663361e6b110d579a8b1d4c22667068", "tree": "e93ebf2f57bf92ff7a9cd045764b3cdbb99a07e5", "parents": [ "3453a7122c1d585ad789ed0f63deb90cc5e89fae" ], "author": { "name": "Stephen Hemminger", "email": "stephen.hemminger@vyatta.com", "time": "Mon Aug 18 14:13:29 2008 -0700" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Jun 12 17:07:49 2009 +0100" }, "message": "[cleanup] Convert XMALLOC/memset to XCALLOC\n\nSimple conversion of XMALLOC/memset to XCALLOC\n" }, { "commit": "0be8dfb2a95f41f100982085595b7c7505127018", "tree": "add7218b0c518ac0cd276c74fe700b5ed1f26762", "parents": [ "42176e6b01c9ca2b2725952684b2d7792468e861" ], "author": { "name": "Chris Caputo", "email": "ccaputo@alt.net", "time": "Tue Jun 02 18:40:07 2009 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Tue Jun 02 18:45:10 2009 +0100" }, "message": "[snmp] Compiler warning fixes for when \"--enable-snmp\" is configured.\n\nCompiled on 32-bit and 64-bit linux gcc 4.1.2 platforms.\nNo run-time testing on 32-bit and limited run-time testing on 64-bit.\n" }, { "commit": "c5a89ff4e68c49b8841baf3c76290dd78ba383ec", "tree": "bd48c628314d40d870b85f539f4408539aa7853e", "parents": [ "acde4b861333d799b50d6e8a53214abc0d17ede3" ], "author": { "name": "Krisztian Kovacs", "email": "Kris.Kovacs@MorganStanley.com", "time": "Tue Jun 02 18:09:48 2009 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Tue Jun 02 18:09:48 2009 +0100" }, "message": "[ripd] Fix metrix in call to rip_zebra_ipv4_delete\n\nFix a potential problem (most probably not triggering a real problem, at\nleast on Linux). When an interface goes down and ripd tries to delete the\ncorresponding route it errorneously passes the interface\u0027s index instead of\nthe metric to zebra.\n" }, { "commit": "fb62a3cef5960885119f9e87c833520ddf2a9b49", "tree": "cf6c5cde38c91ad555021f44793b92fd34de8198", "parents": [ "b38309a4ee831a440ef78f8a27db584f2f8e8276" ], "author": { "name": "Joakim Tjernlund", "email": "Joakim.Tjernlund@transmode.se", "time": "Tue May 13 20:03:32 2008 +0200" }, "committer": { "name": "Joakim Tjernlund", "email": "Joakim.Tjernlund@transmode.se", "time": "Mon Aug 25 09:48:30 2008 +0200" }, "message": "Make --enable-snmp cross compile and make libcrypto optional with --without-crypto\n\nAutoconfig work by me, the rest was done by\n\"Kirill K. Smirnov\" \u003clich@math.spbu.ru\u003e\n" }, { "commit": "5515de330cf6c5449c0a56862072750b07d23fd7", "tree": "4651f48d94ba97117d84fdaa2210563676adc8df", "parents": [ "d68cbf9261869e532dfdd14dbb4122b3f3feb0d4" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Wed Mar 21 12:41:22 2007 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Aug 22 20:02:08 2008 +0100" }, "message": "[administrivia] Update gitignore files\n\n- Add more stuff, archive libraries, etc..\n" }, { "commit": "d68cbf9261869e532dfdd14dbb4122b3f3feb0d4", "tree": "5cc873e6a38a3db9ad5fb4dfe579624ff7693c13", "parents": [ "3998bfd76620a676fbd77f19c5c6ea80a4cc88d2" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Sat Oct 21 18:35:27 2006 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Aug 22 20:00:46 2008 +0100" }, "message": "[administrivia] Git should ignore backup files and .loT files\n" }, { "commit": "3998bfd76620a676fbd77f19c5c6ea80a4cc88d2", "tree": "66bf93340e55bb06b25544ef04afec3749269391", "parents": [ "e5248434c0d287668be956a2bd52399d67b16c39" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Tue Aug 19 14:13:43 2008 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Aug 22 19:57:22 2008 +0100" }, "message": "[trivia] Remove ChangeLog files, as this data is now maintained in SCM\n" }, { "commit": "1423c809cc4ddc2e013ba6264c49a11e5719c6f2", "tree": "db0389e7de020bbcb9fd78d45417b0842a6adb0b", "parents": [ "89d9fa301e146193093ff876f96b3612dc390bbb" ], "author": { "name": "Stephen Hemminger", "email": "stephen.hemminger@vyatta.com", "time": "Thu Aug 14 17:59:25 2008 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Aug 22 19:52:58 2008 +0100" }, "message": "[lib] mes_lookup string lookup table argument should be marked const\n\n2008-08-14 Stephen Hemminger \u003cstephen.hemminger@vyatta.com\u003e\n\n\t* lib/log.{c,h}: struct message argument should point to const\n\t* */*.c: adjust to suit,\n\nSigned-off-by: Paul Jakma \u003cpaul@quagga.net\u003e\n" }, { "commit": "46bc0e432e756fcb8fc4f703b47cd25b9fc7139c", "tree": "60100ca1e11c3c3600441d366b236f4a2de519ca", "parents": [ "d664ae1182c29b74b409bc8594b7bd0575e91ce9" ], "author": { "name": "Paul P Komkoff Jr", "email": "i@stingr.net", "time": "Wed Aug 13 16:17:04 2008 +0100" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Aug 22 19:52:12 2008 +0100" }, "message": "[build] Test for GNU-style PIE support in toolchain and enable\n\n2008-08-13 Paul P Komkoff Jr \u003ci@stingr.net\u003e\n\n\t* configure.ac: add a configure flag and autoconf macro, which will\n\t determine if your toolchain supports PIE.\n\t* */Makefile.am: add corresponding CFLAGS and LDFLAGS into\n\t appropriate places.\n\nSigned-off-by: Paul Jakma \u003cpaul@quagga.net\u003e\n" }, { "commit": "3c5a0a4f8fe3811affff6d5e123379eedb083571", "tree": "79e285e0bd04c6ef0dfcde9cf0ce8fda8abecbe1", "parents": [ "750e814693050bc97391eec618aad9db798ee5e8" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Sun Feb 19 17:30:10 2006 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul@quagga.net", "time": "Fri Aug 22 19:49:33 2008 +0100" }, "message": "[administrivia] Add .gitignore files, based on .cvsignores.\n" }, { "commit": "fa93b16208c2e7ffb09bd5bf72fb1a70a1ad8f73", "tree": "f69eeeb8856b70d659811e7b65f33e353200577b", "parents": [ "0d6b2ee249e9efba30da3236c413bf03c7b27ed9" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 29 19:03:08 2008 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 29 19:03:08 2008 +0000" }, "message": "[ripd] Fix mistaken empty string test\n\n2008-05-29 Stephen Hemminger \u003cstephen.hemminger@vyatta.com\u003e\n\n\t* ripd.c: (rip_auth_md5) fix bogus empty string test\n" }, { "commit": "0d6b2ee249e9efba30da3236c413bf03c7b27ed9", "tree": "4d9320f2c34f0c127b58b92f59e2c2afd2d5818f", "parents": [ "768a27ea7ba25257c79689af83ab37945dc1cc3c" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 29 18:29:16 2008 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 29 18:29:16 2008 +0000" }, "message": "[daemons] Sanity check port number arguments before use\n\n2008-05-29 Martin Nagy \u003cmnagy@redhat.com\u003e\n\n\t* */*main.c: Sanity check port numbers before using.\n" }, { "commit": "ce6ab03a273beb903731621153722511910ebbe5", "tree": "a94b4f3f4d539fa619fb937578f13daaadce6142", "parents": [ "11486b5265b2e0e2cf8b140018c47bd9a35cba93" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu Mar 13 03:28:13 2008 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu Mar 13 03:28:13 2008 +0000" }, "message": "[ripd] remove unnecessary 0 entries from struct message\u0027s\n\n2008-03-13 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c/rip_interface.c: Remove 0 entries from rip_msg\n\t ri_version_msg struct message\u0027s, not needed with recent fixes\n\t to mes_lookup.\n" }, { "commit": "6f0e3f6e17687eb25b7b77c4fdc8324837d4700f", "tree": "8a94d9212060f0f2ee7cbd0079c2687eed7348dc", "parents": [ "08d3d5b398ae81de7659509f159e814d1bbd4375" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 10 02:38:51 2007 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 10 02:38:51 2007 +0000" }, "message": "[autoconf] bugs 162,303,178: Fix \u0027present but can not be compiled\u0027 warnings\n\n2007-05-09 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* configure.ac: sys/conf.h depends on sys/param.h, at least on\n\t FBSD 6.2.\n\t (bug #363) Should check for in_pktinfo for IRDP\n\n2006-05-27 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* configure.ac: General cleanup of header and type checks, introducing\n\t an internal define, QUAGGA_INCLUDES, to build up a list of\n\t stuff to include so as to avoid \u0027present but cant be compiled\u0027\n\t warnings.\n\t Misc additional checks of things missing according to autoscan.\n\t Add LIBM, for bgpd\u0027s use of libm, so as to avoid burdening\n\t LIBS, and all the binaries, with libm linkage.\n\t Remove the bad practice of using m4 changequote(), just\n\t quote the []\u0027s in the case statements properly.\n\t This should fix bugs 162, 303 and 178.\n\t* */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced\n\t HAVE_* defines. I.e. HAVE_SA_LEN -\u003e HAVE_STRUCT_SOCKADDR_SA_LEN,\n\t* bgpd/Makefile.am: Add LIBM to bgpd\u0027s LDADD, for pow().\n" }, { "commit": "33672eddf14c5b619fc38975d4c1f2888189cbc8", "tree": "6f3d5d1bf2cf861d573db6711ce849b27d3b8b8f", "parents": [ "e8a56f02ee52a0a4f06440f4dfef86a21e6ce5c1" ], "author": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Fri Apr 27 18:03:11 2007 +0000" }, "committer": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Fri Apr 27 18:03:11 2007 +0000" }, "message": "[ripd, ripngd] Remove useless code in rip_vty_out_uptime function\n\n2007-04-27 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* ripd/ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now.\n\t* ripngd/ripngd.c: (ripng_vty_out_uptime) Remove unused variable\n\t timer_now.\n" }, { "commit": "a1fdf9479637642ae3de0ee6ef5c0958d6e687d8", "tree": "28dfc85b9bfcbbf5064703484fc60a01c904e5e9", "parents": [ "f5e004f74fecaf84b50f8c1823432077ad7e15b7" ], "author": { "name": "Vincent Jardin", "email": "vincent.jardin@6wind.com", "time": "Wed Apr 11 15:12:05 2007 +0000" }, "committer": { "name": "Vincent Jardin", "email": "vincent.jardin@6wind.com", "time": "Wed Apr 11 15:12:05 2007 +0000" }, "message": "Fix the display of route timeout in \"show ip rip\". (Use thread_timer_remain_second)\n" }, { "commit": "a4c648281dfdc45687580ea2d20884b5d7dbdc8d", "tree": "beca0c3e413f1b9eee1266906a3035b256c8c147", "parents": [ "afb88a669167358ea2be64aa0d10c8c42fa7509c" ], "author": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Wed Mar 21 18:57:38 2007 +0000" }, "committer": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Wed Mar 21 18:57:38 2007 +0000" }, "message": "[ripd] Fix \"show ip rip status\" display of time until next update\n\n2007-03-21 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* ripd.c: (show_ip_rip_status) Use new thread_timer_remain_second\n\t function instead of rip_next_thread_timer to display the time until\n\t next update properly.\n\t (rip_next_thread_timer) Remove obsolete function.\n" }, { "commit": "e4529636b77124285cca96a62799d0ff6a7addeb", "tree": "a8a50de7413833d5277ed7309248e03719e9efd3", "parents": [ "43cd33a44e010f818633b7f144b5a0be352b41e7" ], "author": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Tue Dec 12 19:18:21 2006 +0000" }, "committer": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Tue Dec 12 19:18:21 2006 +0000" }, "message": "[PtP over ethernet] New peer flag allows much more addressing flexibility\n\n2006-12-12 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating\n\t whether a peer address has been configured. Comment now shows\n\t the new interpretation of the destination addr: if ZEBRA_IFA_PEER\n\t is set, then it must contain the destination address, otherwise\n\t it may contain the broadcast address or be NULL.\n\t (CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete\n\t macros that were specific to IPv4 and not fully general.\n\t (CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.\n\t (CONNECTED_PREFIX) New macro giving the prefix to insert into\n\t the RIB: if CONNECTED_PEER, then use the destination (peer) address,\n\t else use the address field.\n\t (CONNECTED_ID) New macro to come up with an identifying address\n\t for the struct connected.\n\t* if.c: (if_lookup_address, connected_lookup_address) Streamline\n\t logic with new CONNECTED_PREFIX macro.\n\t* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros\n\t for better performance than the general prefix_copy function.\n\t* zclient.c: (zebra_interface_address_read) For non-null destination\n\t addresses, set prefixlen to equal the address prefixlen. This\n\t is needed to get the new CONNECTED_PREFIX macro to work properly.\n\t* connected.c: (connected_up_ipv4, connected_down_ipv4,\n\t connected_up_ipv6, connected_down_ipv6) Simplify logic using the\n\t new CONNECTED_PREFIX macro.\n\t (connected_add_ipv4) Set prefixlen in destination addresses (required\n\t by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead\n\t of testing for IFF_POINTOPOINT. Delete invalid warning message.\n\t Warn about cases where the ZEBRA_IFA_PEER is set but no\n\t destination address has been supplied (and turn off the flag).\n\t (connected_add_ipv6) Add new flags argument so callers may set\n\t the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies\n\t IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.\n\t Set prefixlen in destination address so CONNECTED_PREFIX will work.\n\t* connected.h: (connected_add_ipv6) Add new flags argument so\n\t callers may set the ZEBRA_IFA_PEER flag.\n\t* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro\n\t to decide whether the destination address is a peer or broadcast\n\t address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).\n\t* if_ioctl.c: (if_getaddrs) Instead of setting a peer address\n\t only when the IFF_POINTOPOINT is set, we now accept a peer\n\t address whenever it is available and not the same as the local\n\t address. Otherwise (no peer address assigned), we check\n\t for a broadcast address (regardless of the IFF_BROADCAST flag).\n\t And must now pass a flags value of ZEBRA_IFA_PEER to\n\t connected_add_ipv4 when a peer address is assigned.\n\t The same new logic is used with the IPv6 code as well (and we\n\t pass the new flags argument to connected_add_ipv6).\n\t (if_get_addr) Do not bother to check IFF_POINTOPOINT: just\n\t issue the SIOCGIFDSTADDR ioctl and see if we get back\n\t a peer address not matching the local address (and set\n\t the ZEBRA_IFA_PEER in that case). If there\u0027s no peer address,\n\t try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.\n\t* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl\n\t without bothering to check the IFF_POINTOPOINT flag. And if\n\t no peer address was found, just try the SIOCGLIFBRDADDR ioctl\n\t without checking the IFF_BROADCAST flag. Call connected_add_ipv4\n\t and connected_add_ipv6 with appropriate flags.\n\t* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to\n\t connected_add_ipv6.\n\t* kernel_socket.c: (ifam_read) Must pass new flags argument to\n\t connected_add_ipv6.\n\t* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2\n\t to determine local and possible peer address (so there\u0027s no longer\n\t a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.\n\t Pass new flags argument to connected_add_ipv6.\n\t (netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast\n\t to determine whether the connected destination address is a\n\t broadcast address.\n\t* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)\n\t Simplify logic by using new CONNECTED_PREFIX macro.\n\t* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,\n\t ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX\n\t macro.\n\t* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX\n\t macro, both options collapse into the same code.\n\t* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new\n\t CONNECTED_ID macro.\n\t (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX\n\t macro.\n\t* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro\n\t instead of testing the IFF_POINTOPOINT flag.\n\t* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro\n\t instead of testing with if_is_pointopoint. And add commented-out\n\t code to implement alternative (in my opinion) more elegant behavior\n\t that has no special-case treatment for PtP addresses.\n\t (ospf_network_run) Use new CONNECTED_ID macro to simplify logic.\n\t* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID\n\t macro to simplify logic.\n\t (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does\n\t not give a useful result if prefixlen is 32 (we require a peer\n\t address in such cases).\n\t* ripd.c: (rip_update_interface) Fix same bug as above.\n" }, { "commit": "876b8be0ab24721e8f94d47dde022563f76db992", "tree": "60afcf14974d39a081b64c71191038701e73a3f5", "parents": [ "98954844ae56d142e96341d5dff959ec5518111e" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Sun Oct 15 23:35:57 2006 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Sun Oct 15 23:35:57 2006 +0000" }, "message": "[daemon startup] Add --dry-run/-C argument to daemons, to check config file syntax\n\n2006-10-04 Oliver Hookins \u003cohookins@gmail.com\u003e\n\n\t* bgpd/bgp_main.c: Add configuration check option, with\n\t\u0027-C\u0027 rather than \u0027-c\u0027 for consistency between daemons.\n\t* isisd/isis_main.c: ditto\n\t* ospf6d/ospf6_main.c: ditto\n\t* ospfd/ospf_main.c: ditto\n\t* ripngd/ripng_main.c: ditto\n\t* vtysh/vtysh_main.c: ditto\n\t* ripd/rip_main.c: Change the config check option to\n\t\u0027-C\u0027 and tidy up the code.\n\t* zebra/main.c: ditto\n\n2006-10-04 Stergiakis Alexandros \u003castergiakis@antcor.com\u003e\n\n\t* ripd/rip_main.c: This trivial patch introduces a new\n\t command-line option \u0027-c\u0027, which instructs zebra/ripd\n\t to check its configuration file for validity,\tprint\n\t any error message, and then exit. This is useful when\n\t the configuration file is edited by hand or otherwise,\n\t and you simply want to validate it without any other\n\t effect.\n\t* zebra/main.c: ditto\n" }, { "commit": "b25ea4d085c858137ec28b1be9d6ab6c30a97303", "tree": "476bf1799357a70ea42cdfccee9340e8b32172d6", "parents": [ "3e557ae1ea7693d91b6df42c2529952d6a349911" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Mon Sep 11 02:14:16 2006 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Mon Sep 11 02:14:16 2006 +0000" }, "message": "[ripd] bug #293: routemap set metric doesn\u0027t check for underflow correctly\n\n2006-09-11 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* rip_routemap.c: (route_set_metric) underflow check needs to\n\t use signed, problem identified and diagnosed by Pavel\n\t Nikiforov in bug #293.\n" }, { "commit": "3e557ae1ea7693d91b6df42c2529952d6a349911", "tree": "16edc7c42b662c852158ed802fda2f9200be3308", "parents": [ "1a392d46db1917dfca2ddd06d7f0021396f8ecfa" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Mon Sep 11 02:10:40 2006 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Mon Sep 11 02:10:40 2006 +0000" }, "message": "[ripd] bug #278: remove gratuitous use of mid-function declaration\n\n2006-09-11 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c: (rip_read) remove gratuitous use of mid-function\n\t declaration of vrecv, bug #278.\n" }, { "commit": "9a57dc69d2432b6633fc47b05d4ee475a29db361", "tree": "76f7ce6c0923fbe5892cf6829b42a50d80116f00", "parents": [ "adf6221437073f4d427c9c973e4c95381b13fc73" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Fri Jun 30 16:58:53 2006 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Fri Jun 30 16:58:53 2006 +0000" }, "message": "[ripd] update to use auto-generated redistribute route-type defs\n\n2006-06-29 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* rip_zebra: (general) convert redistribute commands to use\n\t the auto-generated defines.\n" }, { "commit": "15a2b089ced3f1e956659e9ca88af45d1c48272c", "tree": "26ae18cd6cb7021307586a6ed16c3e058a92ebc3", "parents": [ "9c27ef9b9c26db0af507869c2866c4a8463f4ae7" ], "author": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 04 07:36:34 2006 +0000" }, "committer": { "name": "Paul Jakma", "email": "paul.jakma@sun.com", "time": "Thu May 04 07:36:34 2006 +0000" }, "message": "[ripd] bugs #261, #262: Fix RIPv1 info-leak and unauthenticated route updates\n\n2006-05-04 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* (general) Fixes for bugs #261 and 262. Thanks to\n\t Konstantin V. Gavrilenko \u003ckos@arhont.com\u003e for the problem\n\t reports, testing of a series of proposed patches and comment\n\t on the proposed changes in behaviour.\n\t* rip_interface.c: (ip_rip_authentication_mode_cmd) Parse all\n\t of the command before making any changes to configured state.\n\t* ripd.c: (rip_read) RIP version control should be absolute and\n always apply, fixes bug #261 by allowing RIPv1 to be disabled.\n\t Fix bug #262: If authentication is enabled, then\n\t unauthenticated packets should not be accepted. We do however\n\t make an exception for RIPv1 REQUEST packets, to which we will\n\t reply as RIPv1 can now be disabled fully, to allow ripd to\n\t still provide routing /information/ to simple devices.\n" }, { "commit": "b9d92881f5d45601c4268d99baec8835068b73c2", "tree": "b99acacee536e07a4726b69f8d2b6397e58eadba", "parents": [ "e0062775b9f9945612912bdefc2d9bcf6ab0650b" ], "author": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Fri Apr 28 16:22:36 2006 +0000" }, "committer": { "name": "Andrew J. Schorr", "email": "ajschorr@alumni.princeton.edu", "time": "Fri Apr 28 16:22:36 2006 +0000" }, "message": "[ripd] Fix logic to send updates on all connected addresses.\n\n2006-04-28 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* ripd.c: (rip_update_process) Try to fix the logic for sending\n\t an updated on each connected network. The new code will\n\t attempt to send the update on each connected network, whereas\n\t the previous code seemed to be attempting to avoid sending\n\t more than one RIPv1 update on a given interface, but was coded\n\t incorrectly. The actual effect of the old code was to send\n\t an update only on the first connected address in the cases\n\t where the interface is not multicast, or RIPv2 is not being used.\n" }, { "commit": "7a383339572b0dd1098132ba35c5f8dc34885fd1", "tree": "475efdb55c563aace907e0b4579eacbaf20a3bea", "parents": [ "a1038a15658d2fd4ab3314a9036bbd63f8f471c1" ], "author": { "name": "vincent", "email": "vincent", "time": "Mon Jan 30 18:12:42 2006 +0000" }, "committer": { "name": "vincent", "email": "vincent", "time": "Mon Jan 30 18:12:42 2006 +0000" }, "message": "ripd.c: correct bug that allowed route learnt through RIP to take precedence over connected routes\n" }, { "commit": "e8e1946edf6ba87ef53832cdceccc39d7f0c3f26", "tree": "fcdaf92bf4129a8a58825bd21ae841a6b3b2bda8", "parents": [ "779adb0147cfff1a831b08853976342ad2110fcd" ], "author": { "name": "paul", "email": "paul", "time": "Thu Jan 19 20:16:55 2006 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Thu Jan 19 20:16:55 2006 +0000" }, "message": "[compiler] miscellaneous trivial compiler warning fixes\n\n2006-01-19 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n * (general) various miscellaneous compiler warning fixes.\n Remove redundant break statements from switch clauses\n which return.\n return from main, not exit, cause it annoys SOS.\n Remove stray semi-colons which cause empty-statement\n warnings.\n\t* zebra/main.c: (sighup) remove private declaration of external\n\t function.\n" }, { "commit": "98fd1e61212ea98154e7cc4b6deed41a07794523", "tree": "961f28ead9a2eb24fb7660cd52023489a7b431e2", "parents": [ "6726f950ad25daa532e75dc7a6875b340ae0447d" ], "author": { "name": "paul", "email": "paul", "time": "Tue Jan 17 17:26:25 2006 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Tue Jan 17 17:26:25 2006 +0000" }, "message": "[ripd] Fix verification of received MD5 authenticated packets\n\n2006-01-17 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c: (rip_auth_md5) remove pdigest, not needed.\n\t Use a local buffer for the auth_str, where it can be properly\n\t nul padded. Do so, hence fixing MD5 authentication.\n\t Key looked up via key ring should be used in preference to\n\t the RIPv1 simple password, not other way around.\n\t No need to copy around digests, we can reference them\n\t directly.\n\t The auth_len received can\u0027t be trusted, some implementations\n\t lie (e.g. older ripd).\n\t (rip_auth_md5_ah_write) rename len local variable to doff\n\t to be consistent with other functions.\n\t (rip_auth_header_write) add the missing return.\n\t (rip_auth_md5_set) use the proper constructs to access stream.\n" }, { "commit": "35a60c2d3c217e3b835821a7f6ea458e2eff44cf", "tree": "ff6dc20fdbf2f081556efaa0edec3ed341b29e97", "parents": [ "e5b308d1af147c78acd2803f4006463e6ff67444" ], "author": { "name": "ajs", "email": "ajs", "time": "Sun Oct 30 23:51:32 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Sun Oct 30 23:51:32 2005 +0000" }, "message": "2005-10-30 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* ripd.c: (rip_response_process) Instead of calling\n\t rip_interface.c:if_valid_neighbor(), call the equivalent\n\t library function if_lookup_address().\n\t* rip_interface.c: (if_valid_neighbor) Remove function, since it is\n\t essentially equivalent to the if_lookup_address() library function.\n\t* ripd.h: (if_valid_neighbor) Remove function declaration.\n" }, { "commit": "92779fe51dd061ab1502a9acdc0cf5241748e0c7", "tree": "e9bfbaca14c5e87dee26c9e98aa1cefcb3650cea", "parents": [ "05865c90ab0bc95b8ca1a54c794809891666cdce" ], "author": { "name": "paul", "email": "paul", "time": "Fri Oct 28 10:23:09 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Oct 28 10:23:09 2005 +0000" }, "message": "2005-10-28 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* Makefile.am: Add rip_interface.h, or else it doesn\u0027t get\n\t included in dists.\n" }, { "commit": "216565ab68148d3161422c0d73730614bfeccd7c", "tree": "d744175fb88d741b40a8131848b361bf8c842084", "parents": [ "dc63bfd49513b7ca157c3992c8bc9da9d736fc39" ], "author": { "name": "paul", "email": "paul", "time": "Tue Oct 25 23:35:28 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Tue Oct 25 23:35:28 2005 +0000" }, "message": "2005-10-26 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c: Update couple more functions to specify void\n\t explicitely.\n" }, { "commit": "dc63bfd49513b7ca157c3992c8bc9da9d736fc39", "tree": "d6ccb6737c0354d106c6b85013979cef2abb3353", "parents": [ "e029d448587551be7543e64e278dbb566f57509a" ], "author": { "name": "paul", "email": "paul", "time": "Tue Oct 25 23:31:05 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Tue Oct 25 23:31:05 2005 +0000" }, "message": "2005-10-26 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* (general) static/extern functions and definitions.\n\t* rip_interface.h: new file, export the public functions from\n\t rip_interface.c\n" }, { "commit": "38d3c163cff92465c94732cb7ecb9761053d2038", "tree": "9ef8e7525d9d671ae833de6cd44d820812ac0898", "parents": [ "5012322ddb0219138ee3583c50fd6e99c5a1d857" ], "author": { "name": "jardin", "email": "jardin", "time": "Wed Oct 19 19:29:59 2005 +0000" }, "committer": { "name": "jardin", "email": "jardin", "time": "Wed Oct 19 19:29:59 2005 +0000" }, "message": "2005-10-17 Vincent Jardin \u003cvincent.jardin@6wind.com\u003e\n\n * ripd.c: rip_create_socket() for each packet, it does not bind to the\n proper interfaces because we forget to use the from address when\n it is specified.\n" }, { "commit": "fac3e8410ade65e269aa2d896bcd3a0b68f10d70", "tree": "a9c9653baee68c5f2a63b53242815dd99329195f", "parents": [ "f52d13cb2e8e7197934d5f241f88647f9b9d78b8" ], "author": { "name": "vincent", "email": "vincent", "time": "Thu Oct 06 07:45:43 2005 +0000" }, "committer": { "name": "vincent", "email": "vincent", "time": "Thu Oct 06 07:45:43 2005 +0000" }, "message": "2005-10-06 Alain Ritoux \u003calain.ritoux@6wind.com\u003e\n\n * rip_interface.c: Now the command \"no ip rip split-horizon\n poisoned-reverse\" just inhibates the poisoned-reverse effects\n but keep spli-horizon activ.\n" }, { "commit": "f52d13cb2e8e7197934d5f241f88647f9b9d78b8", "tree": "b0aa01befc07f57ed47e83ac7dfb383284c49d26", "parents": [ "c05612b9a702d0f49c379c92deb6daab55372aea" ], "author": { "name": "ajs", "email": "ajs", "time": "Sat Oct 01 17:38:06 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Sat Oct 01 17:38:06 2005 +0000" }, "message": "2005-10-01 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* zebra.h: Declare new functions zebra_route_string() and\n\t zebra_route_char().\n\t* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New\n\t functions to map zebra route numbers to strings.\n\t* zebra_vty.c: (route_type_str) Remove obsolete function: use new\n\t library function zebra_route_string() instead. Note that there\n\t are a few differences: for IPv6 routes, we now get \"ripng\" and\n\t \"ospf6\" instead of the old behavior (\"rip\" and \"ospf\").\n\t (route_type_char) Remove obsolete function: ues new library function\n\t zebra_route_char() instead. Note that there is one difference:\n\t the old function returned \u0027S\u0027 for a ZEBRA_ROUTE_SYSTEM route,\n\t whereas the new one returns \u0027X\u0027.\n\t (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace\n\t route_type_str() with zebra_route_string().\n\t (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()\n\t with zebra_route_char().\n\t* bgp_vty.c: (bgp_config_write_redistribute) Use new library function\n\t zebra_route_string instead of a local hard-coded table.\n\t* ospf6_asbr.c: Remove local hard-coded tables zroute_name and\n\t zroute_abname. Change the ZROUTE_NAME macro to use new library\n\t function zebra_route_string(). Remove the ZROUTE_ABNAME macro.\n\t (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with\n\t a call to zebra_route_char(), and be sure to fix the format string,\n\t since we now have a char instead of a char *.\n\t* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and\n\t zebra_route_abname. Note that the zebra_route_name[] table\n\t contained mixed-case strings, whereas the zebra_route_string()\n\t function returns lower-case strings.\n\t (ospf6_zebra_read_ipv6): Change debug message to use new library\n\t function zebra_route_string() instead of zebra_route_name[].\n\t (show_zebra): Use new library function zebra_route_string() instead\n\t of zebra_route_name[].\n\t* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.\n\t (ospf_redist_string) New function implemented using new library\n\t function zebra_route_string(). Note that there are a few differences\n\t in the output that will result: the new function returns strings\n\t that are lower-case, whereas the old table was mixed case. Also,\n\t the old table mapped ZEBRA_ROUTE_OSPF6 to \"OSPFv3\", whereas the\n\t new function returns \"ospf6\".\n\t* ospfd.h: Remove extern struct message ospf_redistributed_proto[],\n\t and add extern const char *ospf_redist_string(u_int route_type)\n\t instead.\n\t* ospf_asbr.c: (ospf_external_info_add) In two messages, use\n\t ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).\n\t* ospf_vty.c: Remove local hard-coded table distribute_str.\n\t (config_write_ospf_redistribute,config_write_ospf_distribute): Use\n\t new library function zebra_route_string() instead of distribute_str[].\n\t* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,\n\t ospf_redistribute_default_set,ospf_redistribute_check)\n\t In debug messages, use ospf_redist_string() instead of\n\t LOOKUP(ospf_redistributed_proto).\n\t* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded\n\t table str[]. Replace str[] with calls to new library function\n\t zebra_route_string().\n\t* ripd.c: Remove local hard-coded table route_info[].\n\t (show_ip_rip) Replace uses of str[] with calls to new library\n\t functions zebra_route_char and zebra_route_string.\n\t* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded\n\t table str[]. Replace str[i] with new library function\n\t zebra_route_string(i).\n\t* ripngd.c: Remove local hard-coded table route_info[].\n\t (show_ipv6_ripng) Use new library function zebra_route_char() instead\n\t of table route_info[].\n" }, { "commit": "ceacedba227e77156f92f7676b274c48a2817e8f", "tree": "f362ecc8f6f183347ebe45ab79727b54d2f527a6", "parents": [ "e62178797d0ee5f326fd587b84ee965cf88833e4" ], "author": { "name": "paul", "email": "paul", "time": "Thu Sep 29 14:39:32 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Thu Sep 29 14:39:32 2005 +0000" }, "message": "2005-09-29 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* configure.ac: Add the test for Solaris least-privileges. Set\n\t defines for whether capabilities are supported and whether of\n\t the linux or solaris variety.\n\t Add missing-prototypes, missing-declarations, char-subscripts\n\t and cast-qual warnings to default cflags, cause Hasso enjoys warnings,\n\t and we really should clean the remaining ones up. (ie isisd..).\n\t* (*/*main.c) Update the zebra_capabilities_t arrays in the various\n\t daemons to match the changes made in lib/privs.h.\n\t* zebra.h: Solaris capabilities requires priv.h to be included.\n\t* privs.{c,h}: Add support for Solaris Least-Privileges.\n\t privs.h: Reduce some of the abstract capabilities, which do\n\t not have rough equivalents on both systems. Rename the net\n\t related caps to _NET, as they should have been in first\n\t place.\n\t (zprivs_terminate) should take the zebra_privs_t as argument so\n\t that it can update change pointer.\n\t Add an additional privilege state, ZPRIVS_UNKNOWN.\n\t* privs.c: (various capability functions) Add\n\t Solaris privileges variants.\n\t (zprivs_state) Use privs.c specific generic types to\n represent various capability/privilege related types, so that\n each can be typedef\u0027d as appropriate on each platform.\n\t (zprivs_null_state) static added, to hold the state the null\n\t method should report (should be raised by default, and\n LOWERED if zprivs_terminate has been called)\n (zprivs_state_null) Report back the zprivs_null_state.\n (cap_map) Make it able to map abstract capability to multiple\n system capabilities.\n (zcaps2sys) Map to abstract capabilities to multiple system\n privileges/capabilities.\n (zprivs_init) move capability related init to seperate\n\t function, zprivs_caps_init.\n (zprivs_terminate) ditto, moved to zprivs_caps_terminate.\n Set the change_state callback to the NULL state, so the\n user can continue to run and use the callbacks.\n" }, { "commit": "fbf5d033041e406ecefd27c2deebf5a4953d1155", "tree": "e9173ab5e05fc86e95f325d2cb2a7a123eb33327", "parents": [ "3fdb2dd9dd8b4ab3517896092dd1b677d191adf9" ], "author": { "name": "vincent", "email": "vincent", "time": "Thu Sep 29 11:25:50 2005 +0000" }, "committer": { "name": "vincent", "email": "vincent", "time": "Thu Sep 29 11:25:50 2005 +0000" }, "message": "2005-09-29 Alain Ritoux \u003calain.ritoux@6wind.com\u003e\n\n * lib/filer.c: show protocol name in filter_show()\n * lib/plist.c: show protocol name in vty_show_prefix_entry()\n * routemap.c: show protocol name in vty_show_route_map_entry()\n * lib/vty.c: in vty_command(), show protocol name if command unknown\n\n * zebra/zserv.c: Always provide distance fo route add\n\n * ripd/rip_snmp.c: rip2IfConfReceive() sends values in conformance\n with RFC. Also PeerDomain is now set to a STRING type.\n * ripd/ripd.h: rip_redistribute_add() API includes metric and distance\n * ripd/ripd.c: rip_redistribute_add() API i.e. stores metric and distance\n Now allows a RIP-route to overcome a redistributed route coming\n from a protocol with worse (higher) administrative distance\n Metrics from redistribution are shown in show ip rip\n * ripd/rip_zebra.c: adapt to the rip_redistribute_add() API, i.e.\n provide distance and metric\n * ripd/rip_interface.c: adapt to the rip_redistribute_add() API\n * ripd/rip_routemap.c: no RMAP_COMPILE_ERROR on (metric \u003e 16) usage\n rather a CMD_WARNING, because set metric ius shared with other\n protocols using larger values (such as OSPF)\n The match metric action takes first external metric if present\n (from redistribution) then RIP metric.\n" }, { "commit": "c1a03d4774f8ecc30a21267469d48cb2276de48c", "tree": "1bf9309bc99e316a5633d18f7724330d8d6fa836", "parents": [ "aa2e32be264710ef208516dfe1661b8148c3eede" ], "author": { "name": "vincent", "email": "vincent", "time": "Wed Sep 28 15:47:44 2005 +0000" }, "committer": { "name": "vincent", "email": "vincent", "time": "Wed Sep 28 15:47:44 2005 +0000" }, "message": "2005-09-28 Alain Ritoux \u003calain.ritoux@6wind.com\u003e\n\n * lib/md5-gnu.h: removed\n * lib/md5.h: replaces md5-gnu.h\n * lib/Makefile.am: use correct md5.h\n * lib/md5.c: import from WIDE\n * ospfd/ospf_packet.c: use new md5 API\n * ripd/ripd.c: use new md5 API\n" }, { "commit": "2c61ae37821f4ece2b2f22d716ac8a135808e70c", "tree": "2ef1ae310612294f9a8ec16bb94d7858070c757b", "parents": [ "60f0651c32e6ee35da5f2d227dc471427568ff45" ], "author": { "name": "paul", "email": "paul", "time": "Tue Aug 16 15:22:14 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Tue Aug 16 15:22:14 2005 +0000" }, "message": "2005-08-16 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c: (general) Fix previous commit, broke multicast bind and\n\t hence setting of source port, which broke communication with\n\t non-borken ripd. Fix removes more stuff from rip_interface.c\n\t than it adds to ripd.c ;)\n\t (rip_create_socket) the to argument really is a from argument,\n\t rename it. Set the source port to RIP port unconditionally, it\u0027s\n\t required.\n\t (rip_send_packet) Set from address correctly for multicast.\n\t (rip_output_process) trivial: num can be BSS specified, rather\n\t than in body.\n\t* rip_interface.c: (rip_interface_multicast_set) strip out\n\t redundant stuff related to bind, which rip_create_socket does.\n\t Just make it set the multicast socket option, as per the\n\t interface concerned, no more.\n" }, { "commit": "f69bd9da8b1f7e0f297d4ffb370552fc41af3c81", "tree": "02352cf7c23e0f6feca56b39de18a11c66bea84b", "parents": [ "a4e987e0b0b264bd3898f567cb7efec9b155d740" ], "author": { "name": "paul", "email": "paul", "time": "Fri Jun 03 18:01:50 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Jun 03 18:01:50 2005 +0000" }, "message": "2005-06-03 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c: (rip_create_socket) Make it static.\n\t Remove the getservbyname stuff, as RFC2453 3.9.2 says non-RIP\n\t port messages should be discarded, quagga doesnt accept them,\n\t no need to lookup port.\n\t Take a \u0027to\u0027 argument, if socket should be bound to something else.\n\t setsockopt_so_recvbuf might need privs, move it to the raised\n\t privileges section.\n\t dont forget to close the socket if bind fails.\n\t (rip_send_packet) use strncpy, just in case (address is under\n\t our control anyway, but still).\n\t dont duplicate rip_create_socket - just use it.\n\t (rip_create) rip_create_socket takes an argument now, modify.\n" }, { "commit": "a4e987e0b0b264bd3898f567cb7efec9b155d740", "tree": "42ec82321bcabe0829090710206556155dd89db9", "parents": [ "a6570ee42f9d3a597c33b73931da5294b43b71ba" ], "author": { "name": "paul", "email": "paul", "time": "Fri Jun 03 17:46:49 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Jun 03 17:46:49 2005 +0000" }, "message": "2005-06-03 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* ripd.c: (rip_create_socket) move it up so rip_send_packet\n\t can use it too.\n" }, { "commit": "7755a8c28388f7583c184fc1dcdd6225d75553bf", "tree": "522039e13af4a901525438e007130f3583f6a214", "parents": [ "7e440869b51dde1da44f6ffc26643838a1e2b36d" ], "author": { "name": "paul", "email": "paul", "time": "Thu Jun 02 08:20:53 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Thu Jun 02 08:20:53 2005 +0000" }, "message": "2005-06-01 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* rip_interface.c: Fix authentication, no-auth impossible to specify\n\t (rip_interface_new) default to RIP_NO_AUTH\n\t (rip_interface_reset) ditto\n\t (rip_interface_config_write) write out config for simple\n" }, { "commit": "0cb8a01c38284a5a3f4ee4b017b69cd5f3e39f9a", "tree": "c3630492d44c8a9f45eed668e960d644f322f595", "parents": [ "033e861222f07d68697aa883d9391a30c3e011c6" ], "author": { "name": "paul", "email": "paul", "time": "Sun May 29 11:27:24 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Sun May 29 11:27:24 2005 +0000" }, "message": "2005-05-29 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* ripd.c: (rip_output_process) fix error which crept in my\n\t previous rip auth untanglement commit - it had become impossible\n\t to not have authentication (even for v1).\n" }, { "commit": "033e861222f07d68697aa883d9391a30c3e011c6", "tree": "e21f614e529e61e4de6ed8c3d64cae12ed20c9c2", "parents": [ "70601e0691e178ca23f14fdc666a97efce26897f" ], "author": { "name": "hasso", "email": "hasso", "time": "Sat May 28 04:50:54 2005 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sat May 28 04:50:54 2005 +0000" }, "message": "Sync bgpd and ripd set_metric_addsub_cmd commands. Fixes bugzilla #192.\n[backport candidate]\n" }, { "commit": "dc625e86063125f8ecaaa1502c3cf53f44d76eff", "tree": "243a52620109d888335b26cf8fdf98052b62e801", "parents": [ "cf96db1cef3e039f3a87c0bc36206b882e804949" ], "author": { "name": "hasso", "email": "hasso", "time": "Thu May 26 06:26:40 2005 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Thu May 26 06:26:40 2005 +0000" }, "message": "\t* rip_routemap.c: In case of \u00270.0.0.0\u0027 used as \u0027nexthop\u0027, use sender\n\t address as nexthop in routemap.\n\n\tFixes bugzilla #186. [backport candidate]\n" }, { "commit": "cf96db1cef3e039f3a87c0bc36206b882e804949", "tree": "10c9cb9bae5772bdfb340ae263b59a3d4deb3ce4", "parents": [ "b5f29603399070041289729e175fbec085e8e904" ], "author": { "name": "hasso", "email": "hasso", "time": "Wed May 25 21:15:32 2005 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Wed May 25 21:15:32 2005 +0000" }, "message": "\t* rip_routemap.c: Make \"match interface\" routemap command match both -\n\t in and out interfaces.\n\n\tFixes bugzilla #185. [backport candidate]\n" }, { "commit": "d4e47287efd60f77b473f8d5677e4dac08c192b0", "tree": "06dfe25619e4cee9601a92b07b7a61625c0f6c4a", "parents": [ "42c981994adcf7fb2e1c2bea170cc5f196d5a1d7" ], "author": { "name": "ajs", "email": "ajs", "time": "Wed May 11 15:56:21 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Wed May 11 15:56:21 2005 +0000" }, "message": "2005-05-11 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* rip_interface.c (rip_interface_add): Need to call\n\t rip_passive_interface_apply (was already calling it in\n\t rip_interface_up).\n\n\t[backport candidate]\n" }, { "commit": "634f9ea20fce82c94407cb677b5487b65bde1973", "tree": "32db82e4ae3b0f409d6d06a0fda401f9d5df5cc9", "parents": [ "dfb9a545f8e3500e6a99518193872f526c1f56ba" ], "author": { "name": "ajs", "email": "ajs", "time": "Mon Apr 11 15:51:40 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Mon Apr 11 15:51:40 2005 +0000" }, "message": "2005-04-11 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tImplement non-blocking zclient I/O with buffering.\n\t* zclient.h (struct zclient): Add two fields to support non-blocking\n\t I/O: struct buffer *wb, and struct thread *t_write.\n\t (zclient_free): Remove function.\n\t (zebra_redistribute_send): Change 2nd arg from socket fd to\n\t struct zclient * (needed to support non-blocking I/O and buffering).\n\t (zclient_send_message): New function to send an arbitrary\n\t message with non-blocking I/O.\n\t* zclient.c (zclient_new): Create write buffer.\n\t (zclient_free): Remove unused function.\n\t (zclient_stop): Must cancel new t_write thread. Also, reset\n\t all buffers: ibuf, obuf, and wb.\n\t (zclient_failed): New helper function for typical error handling.\n\t (zclient_flush_data): New thread to flush queued data.\n\t (zclient_send_message): New function to send the message in\n\t zclient-\u003eobuf to zebra using non-blocking I/O and buffering.\n\t (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use\n\t new zclient_send_message function instead of calling writen.\n\t (zclient_start): Set socket non-blocking. Also, change 2nd arg\n\t to zebra_redistribute_send from zclient-\u003esock to zclient.\n\t (zebra_redistribute_send): Change 2nd arg to struct zclient *.\n\t Can now use zclient-\u003eobuf to assemble the message instead of\n\t allocating a temporary stream. And call zclient_send_message to\n\t send the message instead of writen.\n\t (zclient_read): Convert to support non-blocking I/O by using\n\t stream_read_try instead of deprecated stream_read.\n\t (zclient_redistribute): Change 2nd arg to zebra_redistribute_send\n\t from zclient-\u003esock to zclient.\n\t* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):\n\t Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t to zclient.\n\t* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead\n\t of writen.\n\t* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,\n\t rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send\n\t from zclient-\u003esock to zclient.\n\t* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):\n\t Change 2nd arg to zebra_redistribute_send from zclient-\u003esock\n\t to zclient.\n\t* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):\n\t The 2nd arg to zebra_redistribute_send is now zclient instead of\n\t zclient-\u003esock.\n\t* isis_zebra.h (isis_zebra_finish): Remove declaration of unused\n\t function.\n\t* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message\n\t to send the message to zebra instead of calling writen directly, since\n\t zclient_send_message understands non-blocking I/O and will manage\n\t the buffer queue appropriately.\n\t (isis_zebra_finish): Remove unused function, particularly since\n\t the zclient_free function has been removed.\n" }, { "commit": "1eb8ef2584833f18fb674e127d59cb5a7f771482", "tree": "f5b09d4781de9a9b08839fefb6530e64d2d2ec31", "parents": [ "5920990fecba7e2430af3cfaa8bcbaed40d0ba1a" ], "author": { "name": "paul", "email": "paul", "time": "Thu Apr 07 07:30:20 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Thu Apr 07 07:30:20 2005 +0000" }, "message": "2005-04-07 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* (global): Fix up list loops to match changes in lib/linklist,\n\t and some basic auditing of usage.\n\t* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES\n\t* HACKING: Add notes about deprecating interfaces and commands.\n\t* lib/linklist.h: Add usage comments.\n\t Rename getdata macro to listgetdata.\n\t Rename nextnode to listnextnode and fix its odd behaviour to be\n\t less dangerous.\n\t Make listgetdata macro assert node is not null, NULL list entries\n should be bug condition.\n ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use\n with for loop, Suggested by Jim Carlson of Sun.\n Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the\n \"safety\" of previous macro.\n\t LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to\n\t distinguish from the similarly named functions, and reflect their\n\t effect better.\n\t Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section\n\t with the old defines which were modified above,\n\t for backwards compatibility - guarded to prevent Quagga using it..\n\t* lib/linklist.c: fix up for linklist.h changes.\n\t* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single\n\t scan of the area list, rather than scanning all areas first for\n\t INTER_ROUTER and then again for INTER_NETWORK. According to\n\t 16.2, the scan should be area specific anyway, and further\n\t ospf6d does not seem to implement 16.3 anyway.\n" }, { "commit": "d2fc88962a9a494ecb34167871bb9e7273a25d33", "tree": "304a1c1a744972bc10b1f677a134907c404b361d", "parents": [ "386e61502d391adb985ac1487825349ec85e6a8c" ], "author": { "name": "ajs", "email": "ajs", "time": "Sat Apr 02 18:38:43 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Sat Apr 02 18:38:43 2005 +0000" }, "message": "2005-04-02 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\tFix problems when netlink interfaces are renamed (same ifindex used\n\tfor a new interface). Start cleaning up some problems with the way\n\tinterface names are handled.\n\t* interface.c: (if_new_intern_ifindex) Remove obsolete function.\n\t (if_delete_update) After distributing the interface deletion message,\n\t set ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t (if_dump_vty) Detect pseudo interface by checking if ifp-\u003eifindex is\n\t IFINDEX_INTERNAL.\n\t (zebra_interface) Check return code from interface_cmd.func.\n\t Do not set internal ifindex values to if_new_intern_ifindex(),\n\t since we now use IFINDEX_INTERNAL for all pseudo interfaces.\n\t* kernel_socket.c: (ifm_read) Fix code and comments to reflect that\n\t all internal interfaces now have ifp-\u003eifindex set to IFINDEX_INTERNAL.\n * rt_netlink.c: (set_ifindex) New function used to update ifp-\u003eifindex.\n\t Detects interface rename events by checking if that ifindex is already\n\t being used. If it is, delete the old interface before assigning\n\t the ifindex to the new interface.\n\t (netlink_interface, netlink_link_change) Call set_ifindex to update\n\t the ifindex.\n\t* if.h: Remove define for IFINDEX_INTERNBASE and add define\n\t IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-\n\t interfaces should have ifindex set to 0.\n\t (if_new) Remove function.\n\t (if_delete_retain) New function to delete an interface without\n\t removing from iflist and freeing the structure.\n\t (ifname2ifindex) New function.\n\t* if.c: (if_new) Remove function (absorb into if_create).\n\t (if_create) Replace function if_new with call to calloc.\n\t Set ifp-\u003eifindex to IFINDEX_INTERNAL. Fix off-by-one error\n\t in assert to check length of interface name. Add error message\n\t if interface with this name already exists.\n\t (if_delete_retain) New function to delete an interface without\n\t removing from iflist and freeing the structure.\n\t (if_delete) Implement with help of if_delete_retain.\n\t (ifindex2ifname) Reimplement using if_lookup_by_index.\n\t (ifname2ifindex) New function to complement ifindex2ifname.\n\t (interface) The interface command should check the name length\n\t and fail with a warning message if it is too long.\n\t (no_interface) Fix spelling in warning message.\n\t (if_nametoindex) Reimplement using if_lookup_by_name.\n\t (if_indextoname, ifaddr_ipv4_lookup) Reimplement using\n\t if_lookup_by_index.\n\t* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp-\u003eifindex\n\t to IFINDEX_INTERNAL.\n\t* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead\n\t of if_delete, since it is generally not safe to remove interface\n\t structures. After deleting, set ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t (zebra_interface_if_lookup) Tighten up code.\n\t* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function\n\t was commented out. But this is not safe: we should at least update\n\t the ifindex when the interface is deleted. So the new version\n\t updates the interface status and sets ifp-\u003eifindex to\n\t IFINDEX_INTERNAL.\n\t (ospf6_zebra_route_update) Use if_indextoname properly.\n\t* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface\n\t flags to help with debugging.\n\t* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp-\u003eifindex\n\t to IFINDEX_INTERNAL.\n\t (zebra_interface_if_lookup) Make function static. Tighten up code.\n\t* rip_interface.c: (rip_interface_delete) After deleting, set\n\t ifp-\u003eifindex to IFINDEX_INTERNAL.\n\t* ripng_interface.c: (ripng_interface_delete) After deleting, set\n\t ifp-\u003eifindex to IFINDEX_INTERNAL.\n" }, { "commit": "2d58228ecabb23b064e8a06e6241cf0d7e5ca785", "tree": "443509e8113598c7dadaa5e9cdbb153c147d0ffe", "parents": [ "17eff7cb9010c0ba386ab801c220811ded4242b3" ], "author": { "name": "hasso", "email": "hasso", "time": "Mon Mar 28 15:29:07 2005 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Mon Mar 28 15:29:07 2005 +0000" }, "message": "\t* configure.ac, */Makefile.am: Fix previous commit. SNMP includes\n\t must be after lib/ includes in some systems. Introduce SNMP_INCLUDES\n\t for that.\n" }, { "commit": "55468c86040081320f557b696e509b76ddfd6c83", "tree": "3ee726f155f8776d4a220997681d14c0b09addd0", "parents": [ "909a215508fd42473fcbe4f5292a59404e5473af" ], "author": { "name": "paul", "email": "paul", "time": "Mon Mar 14 20:19:01 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Mon Mar 14 20:19:01 2005 +0000" }, "message": "2005-03-14 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* (global) update all c files to match the lib/vector.h rename of\n\t (struct vector).active to max, and vector_max macro to\n\t vector_active.\n\t* lib/vector.h: Rename to (struct vector).max to slightly less\n\t confusing active, for the number of active slots, distinct from\n\t allocated or active-and-not-empty. Rename vector_max to\n\t vector_active for same reason.\n" }, { "commit": "9985f83ce7102f64b15f744b60320f8d14a8a5ff", "tree": "344629bdc2b4a7d53b8d7ca1705c9be2ca282d18", "parents": [ "083ee9d9cdbf72a452b9af96e62d0625ea712cd9" ], "author": { "name": "paul", "email": "paul", "time": "Wed Feb 09 15:51:56 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Wed Feb 09 15:51:56 2005 +0000" }, "message": "2005-02-09 Paul Jakma \u003cpaul.jakma@sun.com\u003e\n\n\t* (global) Update code to match stream.h changes.\n\t stream_get_putp effectively replaced with stream_get_endp.\n\t stream_forward renamed to stream_forward_getp.\n\t stream_forward_endp introduced to replace some previous\n\t setting/manual twiddling of putp by daemons.\n\t* lib/stream.h: Remove putp. Update reference to putp with endp.\n\t Add stream_forward_endp, which daemons were doing manually.\n\t Rename stream_forward to stream_forward_getp.\n\t lib/stream.c: Remove/update references to putp.\n\t introduce stream_forward_endp.\n" }, { "commit": "b14ee00b7f23f216b5f159e88de915b8755b97d6", "tree": "9ca5e20d7ddb00d1e2c40f3ed0f2a68c3b0ba876", "parents": [ "c4c7d0c48b1219d7ed9ed1377cea1be239c45d5d" ], "author": { "name": "paul", "email": "paul", "time": "Fri Feb 04 23:42:41 2005 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Feb 04 23:42:41 2005 +0000" }, "message": "2005-02-04 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* ripd.c: Untangle the construction of RIP auth data.\n\t (rip_auth_prepare_str_send) new helper function, prepare\n\t correct key string.\n\t (rip_auth_simple_write) new helper, write out the\n\t rip simple password auth psuedo-RTE.\n\t (rip_auth_md5_ah_write) new helper, write out the\n\t MD5 auth-header psuedo-RTE.\n\t (rip_auth_header_write) new helper, write out correct\n\t auth header data / psuedo-RTE.\n\t (rip_auth_md5_set) rip out the memmove and writing of the\n\t auth header psuedo-RTE. So that all that is left is to\n\t write the trailing auth digest, and update digest offset\n\t field in the original header.\n\t (rip_write_rte) rip out writing of RIP header, writing of\n\t simple auth data psuedo-RTE. Make it do what its name suggests,\n\t write out actual RTEs.\n\t (rip_output_process) remove the incorrect additional decrements\n\t of rtemax. Prepare the auth_str, which simple or MD5 auth will\n\t need. Move write out of RIP header and auth data to inside the\n\t loop. Adjust paramaters as required.\n" }, { "commit": "6a52d0d155fc8b892e30cdb5e3fbe4c2779bd4cd", "tree": "d4bfab8286e497e30c5ebfed099c317a9397c623", "parents": [ "656b4eeec1fb30402ad2001976c05c6f44fafb34" ], "author": { "name": "ajs", "email": "ajs", "time": "Sun Jan 30 18:49:28 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Sun Jan 30 18:49:28 2005 +0000" }, "message": "2005-01-30 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* daemon.c: (daemon) Replace perror with zlog_err.\n\t* vty.c: (vty_serv_un) Replace perror with zlog_err.\n\t* ripd.c: (rip_create_socket) Replace perror with zlog_err.\n\t* ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with\n\t zlog_err.\n\t* ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with\n\t zlog_err.\n" }, { "commit": "798534576c2525476141628ac14ecc83fd775a5a", "tree": "c5166d696b314ee41961198340b61dd1062af3ec", "parents": [ "0b7d97d293af645d98bc9b196b228d674b2aa344" ], "author": { "name": "ajs", "email": "ajs", "time": "Sun Jan 30 17:40:29 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Sun Jan 30 17:40:29 2005 +0000" }, "message": "2005-01-30 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* ripd.c: (rip_create_socket) Save errno before calling\n\t ripd_privs.change.\n" }, { "commit": "b99760ab51abf8c4c9a1f89dab0c1630a6768ff7", "tree": "daaf8cabb567c5ff1a01368fa1382d8257b56854", "parents": [ "73a7dea305b146febb8e57176295689d6a900f1d" ], "author": { "name": "ajs", "email": "ajs", "time": "Tue Jan 04 16:24:43 2005 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Tue Jan 04 16:24:43 2005 +0000" }, "message": "2005-01-04 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* configure.ac: Added test for broken CMSG_FIRSTHDR macro\n\t (relevant for Solaris 8 and unpatched Solaris 9, don\u0027t know\n\t whether other platforms are affected).\n\t* zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether\n\t config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined\n\t by the configure test program).\n\t* sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead\n\t of CMSG_FIRSTHDR.\n\t* rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR\n\t instead of CMSG_FIRSTHDR.\n\t* ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.\n\t* ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of\n\t CMSG_FIRSTHDR.\n" }, { "commit": "766a0ca3dcb824fc9283be89bb57e47132b26826", "tree": "f8600196fb61cbbcbc090dad480830ce0ffe24fb", "parents": [ "3aa8d5f9893c182eb27f0f6ab354a77edbf1b9f0" ], "author": { "name": "ajs", "email": "ajs", "time": "Wed Dec 15 14:55:51 2004 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Wed Dec 15 14:55:51 2004 +0000" }, "message": "2004-12-15 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* ripd.c: (rip_read) Improve 2 error messages to show the source of\n\t the packet when the lookup fails.\n" }, { "commit": "5d6c37798317cece827dca7f4b539fa0387b5eb9", "tree": "c09349025c5549b316a2de264bc3f9b2de4b7de2", "parents": [ "9b0e25c07763181e73d41d8816762a8aeeb2ad37" ], "author": { "name": "ajs", "email": "ajs", "time": "Wed Dec 08 19:24:06 2004 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Wed Dec 08 19:24:06 2004 +0000" }, "message": "2004-12-08 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* *.c: Change level of debug messages to LOG_DEBUG.\n" }, { "commit": "274a4a4447b13f89f8237156a887d05a24a73cc6", "tree": "d5c2c6ee94bb77ef4346bcc07834808a75210bfd", "parents": [ "5e76477456ce8bc4a1eeaccb5c5e1d3d99ab1300" ], "author": { "name": "ajs", "email": "ajs", "time": "Tue Dec 07 15:39:31 2004 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Tue Dec 07 15:39:31 2004 +0000" }, "message": "2004-12-07 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* bgp_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* isis_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.\n\t Note that stdout logging will no longer be enabled by default when\n\t not running as a daemon.\n\t* ospf_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* rip_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* ripng_main.c: (main) The 2nd argument to openzlog has been removed.\n\t* main.c: (main) The 2nd argument to openzlog has been removed.\n\t So stdout logging will no longer be enabled by default.\n\t* irdp_main.c: (irdp_finish) Reduce severity of shutdown message\n\t from LOG_WARNING to LOG_INFO.\n\t* vtysh.c: Make several functions static instead of global.\n\t Added several commands to support destination-specific logging levels.\n\t (vtysh_completion) This function is unused, so comment it out.\n\t* basic.texi: Document new logging features. Separate basic config\n\t commands from basic VTY commands.\n\t* log.h: Replace struct zlog flags and maskpri fields with maxlvl\n\t array to support individual logging levels for each destination.\n\t Remove the 2nd argument to openzlog since the default logging config\n\t should be standardized inside the library. Replaced the\n\t zlog_set_flag and zlog_reset_flag functions with zlog_set_level.\n\t And zlog_set_file now requires an additional log_level argument.\n\t Declare zlog_proto_names for use inside command.c in the\n\t \"show logging\" command. Added defines useful for command\n\t construction.\n\t* log.c: (vzlog) Decide where to send the message based on the\n\t individual logging levels configured for each destination.\n\t Remove support for ZLOG_STDERR since it was never actually used.\n\t Support record-priority for terminal monitors.\n\t (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific\n\t logging levels. Remove stderr support (was never used). Added\n\t support for terminal monitor logging.\n\t (_zlog_assert_failed) Increase message severity to LOG_EMERG.\n\t (openzlog) Remove 2nd argument since default config should be\n\t standardized in library. By default, terminal monitoring\n\t is set to debug, and all other logging is disabled.\n\t (zlog_set_flag,zlog_reset_flag) Removed.\n\t (zlog_set_level) New function to replace zlog_set_flag and\n\t zlog_reset_flag. Supports destination-specific logging levels.\n\t (zlog_set_file,zlog_reset_file) Support file-specific logging level.\n\t (zlog_rotate) Log an error message if fopen fails, and support\n\t new file-specific logging level.\n\t* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that\n\t command functions will be static instead of global. Remove\n\t declarations for config_exit and config_help. Define new macros\n\t DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can\n\t have deprecated commands in vtysh. Similarly, for completeness,\n\t define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.\n\t Also, fix bug in ALIAS_ATTR macro (didn\u0027t matter because it\n\t was never used).\n\t* command.c: Make many functions static instead of global.\n\t (facility_name,facility_match,level_match) New functions\n\t to support enhanced destination-specific logging levels.\n\t (config_write_host) Support new destination-specific logging levels.\n\t (config_logmsg) Added new \"logmsg\" command to help test logging\n\t system.\n\t (show_logging) Added \"show logging\" command to show the current\n\t configuration of the logging system.\n\t (config_log_stdout_level) Support explicit stdout logging level.\n\t (no_config_log_stdout) Now takes optional LEVEL arg.\n\t (config_log_monitor,config_log_monitor_level,no_config_log_monitor)\n\t New commands creating new \"log monitor\" commands to set terminal\n\t monitoring log level.\n\t (config_log_file_level) Support explicit file logging level.\n\t (config_log_syslog_level) Support explicit syslog logging level.\n\t (config_log_facility,no_config_log_facility) Implement new\n\t \"log facility\" command.\n\t (cmd_init) Add hooks for new commands: \"show logging\", \"logmsg\",\n\t \"log stdout \u003clevel\u003e\", \"log monitor\", \"log monitor \u003clevel\u003e\",\n\t \"no log monitor\", \"log file \u003cfilename\u003e \u003clevel\u003e\",\n\t \"no log file \u003cfilename\u003e \u003clevel\u003e\", \"log syslog \u003clevel\u003e\",\n\t \"log facility\", and \"no log facility\".\n\t* vty.h: Added a \"level\" argument to vty_log so it can support\n\t \"log record-priority\". Declare new function vty_log_fixed for\n\t use in signal handlers.\n\t* vty.c: (vty_log,vty_log_out) Added a \"level\" argument to support\n\t \"log record-priority\" for vty terminal monitors.\n\t (vty_down_level) Use config_exit_cmd.func instead of calling\n\t config_exit directly (since command functions will now be static\n\t instead of global).\n\t (vty_log_fixed) New function to send terminal monitor messages\n\t from inside a signal handler.\n" }, { "commit": "887c44a4f3d8219dc5b1c52b5dcde1f31d52b73d", "tree": "5c0ef5fe1d3948c56e6abf2ffd3c9811e92f0f2e", "parents": [ "bec595ada58ebfa98ad49220f29ab28b58549094" ], "author": { "name": "ajs", "email": "ajs", "time": "Fri Dec 03 16:36:46 2004 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Fri Dec 03 16:36:46 2004 +0000" }, "message": "2004-12-03 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* bgp_main.c: (sigint) Use zlog_notice for termination message.\n\t (main) Use zlog_notice for startup announcement.\n\t* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.\n\t (terminate) This function should be static, not global.\n\t (main) Use zlog_notice for startup announcement, and remove\n\t ifdef ZEBRA_VERSION.\n\t* version.h.in: Remove declaration for pid_output_lock, this function\n\t is now static, not global.\n\t* pid_output.c: (pid_output_lock) This function should be static, not\n\t global. And remove \"old umask\" error message, since it was really\n\t an unimportant debug message, not an error.\n\t (pid_output) Need to declare static function pid_output_lock.\n\t* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination\n\t message.\n\t (main) Remove commented-out call to pid_output_lock (which should\n\t never be called other than from inside pid_output). And use\n\t zlog_notice to print the startup message, which now includes\n\t the vty port.\n\t* ospf_main.c: (sigint) Use zlog_notice for termination message.\n\t (main) Issue a startup announcement using zlog_notice.\n\t* rip_main.c: (sigint) Use zlog_notice for termination message.\n\t (main) Add a startup announcement using zlog_notice.\n\t* ripng_main.c: (sighup) Remove spurious terminating message.\n\t (sigint) Use zlog_notice for termination message.\n\t (main) Issue a startup announcement using zlog_notice.\n\t* main.c: (sigint) Use zlog_notice for termination message.\n\t (main) Add a startup announcement using zlog_notice.\n" }, { "commit": "c065230a4c617a1cdf8813dd25384bcc9591f61a", "tree": "42285fe5604e43ada3b53ac9a77ba1e3c4464b52", "parents": [ "accb156b9b1c3f4b46ab01f8850200f450fc40d8" ], "author": { "name": "hasso", "email": "hasso", "time": "Thu Nov 25 19:33:48 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Thu Nov 25 19:33:48 2004 +0000" }, "message": "Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.\n" }, { "commit": "6099b3b56956322567323c11fd698b2328c6826b", "tree": "fa537bd0eaa9f7d824f39445eabc928db59050ca", "parents": [ "ae5e24d8678f1e3a60dde58d3382c5ba73d6bb27" ], "author": { "name": "ajs", "email": "ajs", "time": "Sat Nov 20 02:06:59 2004 +0000" }, "committer": { "name": "ajs", "email": "ajs", "time": "Sat Nov 20 02:06:59 2004 +0000" }, "message": "2004-11-19 Andrew J. Schorr \u003cajschorr@alumni.princeton.edu\u003e\n\n\t* global: Replace strerror with safe_strerror. And vtysh/vtysh.c\n\t needs to include \"log.h\" to pick up the declaration.\n" }, { "commit": "3c035aa8716efa6f677e43435c5eb9bac6825518", "tree": "ea28fd6b6beadd72d3619315dc66ee0d03a3f7d3", "parents": [ "e064d6d9c3c3319c62fe4fac3e4e5f7a1941a98c" ], "author": { "name": "paul", "email": "paul", "time": "Tue Nov 02 18:59:49 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Tue Nov 02 18:59:49 2004 +0000" }, "message": "- Add .arch-ids and .arch-inventory to cvsignore, to allow one to use arch\n with CVS trees.\n" }, { "commit": "c49ad8f1b0775c1b35ea9bf75f44f3eca105d786", "tree": "6ec708b6c39ca83707395d656e74a52c2eed7ade", "parents": [ "6b6942f93625c073db645a5546fbaaf7e7b2c628" ], "author": { "name": "paul", "email": "paul", "time": "Fri Oct 22 10:27:28 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Oct 22 10:27:28 2004 +0000" }, "message": "2004-10-22 Paul Jakma \u003cpaul@dishone.st\u003e\n\n\t* ripd.c: Collapse redundant passing of various address structs,\n struct interface and struct connected as arguments to functions\n down to two key arguments, namely struct connected and, possibly,\n address of source/destination. Testing for RIPv1 would be useful.\n (rip_read) lookup struct connected for the received packet, pass\n it on.\n * rip_interface.c: With previous changes, we no longer have to tread\n carefully with struct connected, as it will always be there and\n valid.\n" }, { "commit": "3fb9cd6ef456959b6eff939d5c316f6785c2dda4", "tree": "e350cb3ef7b20b8bbccfb1aa9309152311e845bd", "parents": [ "5ae35f45f1292dce3a01f241accafeb2e59b10cc" ], "author": { "name": "hasso", "email": "hasso", "time": "Tue Oct 19 19:44:43 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Tue Oct 19 19:44:43 2004 +0000" }, "message": "OK. Here it is - PtP patch from Andrew J. Schorr. No problems with ospfd,\nripd might need some more testing though.\n" }, { "commit": "c75105ab6e6eeac0b013eab186c97641984f68cc", "tree": "ea221df06e957de7e83f379c9b45f578762736e7", "parents": [ "d68614db1dc36a6814fee33f584417b1441a83e4" ], "author": { "name": "hasso", "email": "hasso", "time": "Wed Oct 13 10:33:26 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Wed Oct 13 10:33:26 2004 +0000" }, "message": "Make initializing smux connection configurable - \"smux peer OID\" command\ninitializes connection, and \"no smux peer\" command terminates it. Fixes\nbugzilla #47 and #112.\n" }, { "commit": "98b718a9d2aa7a3324c553944e26914fe090b87a", "tree": "13a7002a3265a2debfa411a2a2c544dbde972f0a", "parents": [ "a149411b85bbe74cde47d82193026b9401b29de0" ], "author": { "name": "hasso", "email": "hasso", "time": "Mon Oct 11 12:57:57 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Mon Oct 11 12:57:57 2004 +0000" }, "message": "Sync with changes in lib. Make more strings const.\n" }, { "commit": "8a676be30c275bcbe1a3de08c0c942a606caef2e", "tree": "c2202db7df836073b542e49c5f579062ee8b6d57", "parents": [ "7a1d583c02253c53605f310d1afcc9f1c8e15b7b" ], "author": { "name": "hasso", "email": "hasso", "time": "Fri Oct 08 06:36:38 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Fri Oct 08 06:36:38 2004 +0000" }, "message": "There is no warnings here any more.\n" }, { "commit": "1af8193311192ec1bd2a4d2769e0e9b90bc1609f", "tree": "39b136c0cbc64dd6a39651ce21c5c93384bec50f", "parents": [ "c9e52be3f4d98943b67fbbe5d9a7ccd823b88326" ], "author": { "name": "hasso", "email": "hasso", "time": "Sun Sep 26 16:11:14 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Sun Sep 26 16:11:14 2004 +0000" }, "message": "Fix compiler warning.\n" }, { "commit": "52dc7ee65f8d887b0730abc0a5d44d27fc6ecafd", "tree": "a557339540c56dd3953c29a50ca0e48c1911efc8", "parents": [ "44983cf8a9c587dfbcad294b9dfe4dccbb68ba98" ], "author": { "name": "hasso", "email": "hasso", "time": "Thu Sep 23 19:18:23 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Thu Sep 23 19:18:23 2004 +0000" }, "message": "Remove usage of evil list and listnode typedefs.\n" }, { "commit": "0b3acf4f94241905ff36df5c1d9f9f389e45d191", "tree": "48b312ab2de446208d966d234fc37539bed98861", "parents": [ "bf731011ef7038f5766432fec862301c123d4736" ], "author": { "name": "paul", "email": "paul", "time": "Fri Sep 17 08:39:08 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Fri Sep 17 08:39:08 2004 +0000" }, "message": "2004-09-17 Paul Jakma \u003cpaul@dishone.st\u003e\n\n * ripngd/ripngd.c: move setsockopt_so_recvbuf to lib.\n * lib/sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd.\n * ripd/ripd.c: set receive buffer to a decent size, some systems\n have low defaults. Problem noted and fix suggested by Stephan\n Schweizer in [zebra 20967].\n" }, { "commit": "df43a137236e7df433fbd3c633245459d4fd951b", "tree": "8c6fd437c0c2dda0b71fb05d0cc62d6a7875f4c0", "parents": [ "f2bdee97582ed0f869a09c17c9c060a9d52e1064" ], "author": { "name": "hasso", "email": "hasso", "time": "Tue Aug 31 12:04:33 2004 +0000" }, "committer": { "name": "hasso", "email": "hasso", "time": "Tue Aug 31 12:04:33 2004 +0000" }, "message": "Please, tell me truth about what debugging status you are displaying.\n" }, { "commit": "1a51786a70c45003813ffc60874653555a9b486a", "tree": "07cd52dd929569decb8bb487f85cedda99e0358b", "parents": [ "b63cef7c41e2ea92836a2c4570dc34b06c4c5ab7" ], "author": { "name": "paul", "email": "paul", "time": "Thu Aug 19 04:03:08 2004 +0000" }, "committer": { "name": "paul", "email": "paul", "time": "Thu Aug 19 04:03:08 2004 +0000" }, "message": "2004-08-19 Paul Jakma \u003cpaul@dishone.st\u003e\n\n * rip_interface.c: (rip_interface_multicast_set) get rid\n of extraneous if_pointopoint arg. ifp is accessible via connected.\n pass connected-\u003eifp-\u003eifindex to setsockopt_multicast_ipv4.\n * ripd.c: (rip_send_packet) update call to\n rip_interface_multicast_set\n * ripd.h: update rip_interface_multicast_set prototype\n" } ], "next": "b7a97f825768bb3e617cb115540c74b65914e628" }