diff --git a/generated/recommonamplifierparameters.go b/generated/recommonamplifierparameters.go
new file mode 100644
index 0000000..7cd00cf
--- /dev/null
+++ b/generated/recommonamplifierparameters.go
@@ -0,0 +1,140 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// ReCommonAmplifierParametersClassID is the 16-bit ID for the OMCI
+// Managed entity RE common amplifier parameters
+const ReCommonAmplifierParametersClassID ClassID = ClassID(328)
+
+var recommonamplifierparametersBME *ManagedEntityDefinition
+
+// ReCommonAmplifierParameters (class ID #328)
+//	This ME organizes data associated with each OA supported by the RE. The management ONU
+//	automatically creates one instance of this ME for each upstream or downstream OA.
+//
+//	Relationships
+//		An instance of this ME is associated with an instance of the RE downstream amplifier or RE
+//		upstream amplifier ME.
+//
+//	Attributes
+//		Managed Entity Id
+//			NOTE - The type of the linked ME can be determined by uniqueness of slot and port.
+//
+//		Gain
+//			Gain:	This attribute reports the current measurement of the OA's gain, in decibels. Its value is
+//			a 2s complement integer with 0.25-dB granularity, and with a range from -32-dB to 31.5-dB. The
+//			value 0x7F indicates that the current measured gain is 0, i.e., negative infinity in decibels
+//			terms. (R) (optional) (1-byte)
+//
+//		Lower Gain Threshold
+//			Lower gain threshold: This attribute specifies the gain the RE uses to declare the low gain
+//			alarm. Valid values are 0-dB (coded as 0x00) to 63.5-dB (coded as 0xFE). The default value 0xFF
+//			selects the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Upper Gain Threshold
+//			Upper gain threshold: This attribute specifies the gain the RE uses to declare the high gain
+//			alarm. Valid values are 0-dB (coded as 0x00) to 63.5-dB (coded as 0xFE). The default value 0xFF
+//			selects the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Target Gain
+//			Target gain:	This attribute specifies the target gain, when the operational mode of the parent
+//			RE downstream or upstream amplifier is set to constant gain mode. Valid values are 0-dB (coded
+//			as 0x00) to 63.5-dB (coded as 0xFE). The default value 0xFF selects the RE's internal policy.
+//			(R,-W) (optional) (1-byte)
+//
+//		Device Temperature
+//			Device temperature: This attribute reports the temperature in degrees Celcius of the active
+//			device (SOA or pump) in the OA. Its value is a 2s complement integer with granularity
+//			1/256-degree-C. (R) (optional) (2-bytes)
+//
+//		Lower Device Temperature Threshold
+//			Lower device temperature threshold: This attribute is a 2s complement integer that specifies the
+//			temperature the RE uses to declare the low temperature alarm. Valid values are -64 to
+//			+63-degree-C in 0.5-degree-C increments. The default value 0x7F selects the RE's internal
+//			policy. (R,-W) (optional) (1-byte)
+//
+//		Upper Device Temperature Threshold
+//			Upper device temperature threshold: This attribute is a 2s complement integer that specifies the
+//			temperature the RE uses to declare the high temperature alarm. Valid values are -64 to
+//			+63-degree-C in 0.5-degree-C increments. The default value 0x7F selects the RE's internal
+//			policy. (R,-W) (optional) (1-byte)
+//
+//		Device Bias Current
+//			Device bias current: This attribute contains the measured bias current applied to the SOA or
+//			pump laser. Its value is an unsigned integer with granularity 2-mA. Valid values are 0 to
+//			512-mA. (R) (optional) (1-byte)
+//
+//		Amplifier Saturation Output Power
+//			Amplifier saturation output power: This attribute reports the saturation output power of the
+//			amplifier as specified by the manufacturer. Its value is an unsigned integer referred to 1-mW
+//			(i.e., dBm), with 0.1-dB granularity. (R) (optional) (2-bytes)
+//
+//		Amplifier Noise Figure
+//			Amplifier noise figure: This attribute reports the intrinsic noise figure of the amplifier, as
+//			specified by the manufacturer. Its value is an unsigned integer with 0.1-dB granularity (R)
+//			(optional) (1-byte)
+//
+//		Amplifier Saturation Gain
+//			Amplifier saturation gain: This attribute reports the gain of the amplifier at saturation, as
+//			specified by the manufacturer. Its value is an unsigned integer with 0.25-dB granularity, and
+//			with a range from 0 to 63.75-dB. (R) (optional) (1-byte)
+//
+type ReCommonAmplifierParameters struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	recommonamplifierparametersBME = &ManagedEntityDefinition{
+		Name:    "ReCommonAmplifierParameters",
+		ClassID: 328,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xffe0,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  ByteField("Gain", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, true, false, 1),
+			2:  ByteField("LowerGainThreshold", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, true, false, 2),
+			3:  ByteField("UpperGainThreshold", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, true, false, 3),
+			4:  ByteField("TargetGain", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
+			5:  Uint16Field("DeviceTemperature", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, true, false, 5),
+			6:  ByteField("LowerDeviceTemperatureThreshold", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, true, false, 6),
+			7:  ByteField("UpperDeviceTemperatureThreshold", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, true, false, 7),
+			8:  ByteField("DeviceBiasCurrent", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, true, false, 8),
+			9:  Uint16Field("AmplifierSaturationOutputPower", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, true, false, 9),
+			10: ByteField("AmplifierNoiseFigure", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, true, false, 10),
+			11: ByteField("AmplifierSaturationGain", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, true, false, 11),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewReCommonAmplifierParameters (class ID 328) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewReCommonAmplifierParameters(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*recommonamplifierparametersBME, params...)
+}