diff --git a/generated/fastchannelconfigurationprofile.go b/generated/fastchannelconfigurationprofile.go
new file mode 100644
index 0000000..29b72a5
--- /dev/null
+++ b/generated/fastchannelconfigurationprofile.go
@@ -0,0 +1,146 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// FastChannelConfigurationProfileClassID is the 16-bit ID for the OMCI
+// Managed entity FAST channel configuration profile
+const FastChannelConfigurationProfileClassID ClassID = ClassID(432)
+
+var fastchannelconfigurationprofileBME *ManagedEntityDefinition
+
+// FastChannelConfigurationProfile (class ID #432)
+//	This ME contains the FAST channel configuration profile for an xDSL UNI. An instance of this ME
+//	is created and deleted by the OLT.
+//
+//	Relationships
+//		An instance of this ME may be associated with zero or more instances of the PPTP xDSL UNI part
+//		1.
+//
+//	Attributes
+//		Maximum Net Data Rate Maxndr
+//			Maximum net data rate (MAXNDR): This attribute specifies the value of the maximum net data rate.
+//			See clause 11.4.2.2 of [ITU-T G.9701]. Valid values range from 0 (0-kbit/s) to 4294967295
+//			(2^32-1-kbit/s). See clause 7.2.1.1 of [ITUT-G.997.2]. (R, W) (mandatory) (4 bytes)
+//
+//		Minimum Expected Throughput Minetr
+//			Minimum expected throughput (MINETR): This attribute specifies the value of the minimum expected
+//			throughput. See clause 11.4.2.1 of [ITU-T G.9701]. Valid values range from 0 (0-kbit/s) to
+//			4294967295 (2^32-1-kbit/s). See clause-7.2.1.2 of [ITU-T G.997.2]. (R, W) (mandatory) (4 bytes)
+//
+//		Maximum Gamma Data Rate Maxgdr
+//			Maximum gamma data rate (MAXGDR): This attribute specifies the maximum value of the GDR (see
+//			clause 7.11.1.3). The GDR shall not exceed MAXGDR at the start of showtime and during showtime.
+//			Valid values range from 0 (0-kbit/s) to 4294967295 (2^32-1-kbit/s). See clause 7.2.1.3 of [ITU-T
+//			G.997.2]. (R, W) (mandatory) (4 bytes)
+//
+//		Minimum Gamma Data Rate Mingdr
+//			Minimum gamma data rate (MINGDR): This attribute specifies the minimum value of the GDR (see
+//			clause 7.11.1.3). The GDR may be lower than MINGDR. If the GDR is lower than MINGDR at
+//			initialization or when GDR becomes lower than MINGDR during showtime, a TCA occurs. Valid values
+//			range from 0 (0-kbit/s) to 4294967295 (2^32-1-kbit/s). See clause 7.2.1.4 of [ITU-T G.997.2].
+//			(R, W) (mandatory) (4 bytes)
+//
+//		Maximum Delay Delaymax
+//			Maximum delay (DELAYMAX): This attribute specifies the maximum allowed delay for retransmission.
+//			See clause 9.8 of [ITU-T G.9701]. The ITUT-G.9701 control parameter delay_max is set to the same
+//			value as the maximum delay. See clause 11.4.2.3 of [ITU-T G.9701]. Valid values range from 4
+//			(1-ms) to 252 (63-ms) in steps of 0.25-ms. See clause 7.2.2.1 of [ITUT-G.997.2]. (R, W)
+//			(mandatory) (4 bytes)
+//
+//		Minimum Impulse Noise Protection Against Shine Inpmin_Shine
+//			Minimum impulse noise protection against SHINE (INPMIN_SHINE): This attribute specifies the
+//			minimum INP against SHINE. See clause 9.8 of [ITU-T G.9701]. The ITU-T G.9701 control parameter
+//			INP_min_shine is set to the same value as the minimum INP against SHINE. See clause 11.4.2.4 of
+//			[ITU-T G.9701]. Valid values range from 0 to 520 (520 symbol periods). See clause 7.2.2.2 of
+//			[ITUT G.997.2]. (R, W) (mandatory) (2-bytes)
+//
+//		Shine Ratio Shineratio
+//			SHINE ratio (SHINERATIO): This attribute specifies the SHINE ratio that is used in the
+//			definition of the expected throughput rate (ETR). See clause 9.8 of [ITUT-G.9701]. The ITU-T
+//			G.9701 control parameter SHINEratio is set to the same value as the SHINE ratio. See clause
+//			11.4.2.5 of [ITU-T G.9701]. The value is expressed in units of 0.001, Valid values range from 0
+//			to 100 (0.01) in steps of 0.001. See clause 7.2.2.3 of [ITU-T G.997.2]. (R, W) (mandatory)
+//			(1-byte)
+//
+//		Minimum Impulse Noise Protection Against Rein Inpmin_Rein
+//			Minimum impulse noise protection against REIN (INPMIN_REIN): This attribute specifies the
+//			minimum INP against REIN. See clause 9.8 of [ITU-T G.9701]. The ITU-T G.9701 control parameter
+//			INP_min_rein is set to the same value as the minimum INP against REIN. See clause 11.4.2.6 of
+//			[ITU-T G.9701]. Valid values range from 0 to 63 (63-symbol periods). See clause 7.2.2.4 of
+//			[ITU-T G.997.2]. (R, W) (mandatory) (1 byte)
+//
+//		Rein Inter_Arrival Time Iat_Rein
+//			(R, W) (mandatory) (1 byte)
+//
+//		Minimum Reed_Solomon Rfec_Nfec Ratio Rnratio
+//			Minimum Reed-Solomon RFEC/NFEC ratio (RNRATIO): This attribute specifies the minimal required
+//			ratio, RFEC/NFEC, of Reed-Solomon code parameters. The ITU-T G.9701 control parameter rnratio is
+//			set to the same value as the minimum Reed-Solomon RFEC/NFEC ratio. See clause 11.4.2.8 of
+//			[ITUT-G.9701]. The value is expressed in units of 1/32, Valid values range from 0 to 8 (1/4).
+//			See clause 7.2.2.6 of [ITU-T G.997.2]. (R, W) (mandatory) (1 byte)
+//
+//		Rtx_Tc Testmode Rtx_Testmode
+//			RTX-TC testmode (RTX_TESTMODE): This Boolean attribute specifies whether the retransmission test
+//			mode defined in clause 9.8.3.1.2 [ITU-T G.9701] is enabled-(true) or disabled (disabled). See
+//			clause 7.2.2.7 of [ITU-T G.997.2]. (R,-W) (optional) (1 byte)
+//
+type FastChannelConfigurationProfile struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	fastchannelconfigurationprofileBME = &ManagedEntityDefinition{
+		Name:    "FastChannelConfigurationProfile",
+		ClassID: 432,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xffc0,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint32Field("MaximumNetDataRateMaxndr", UnknownAttributeType, 0x0000, 0, mapset.NewSetWith(Read, Write), false, false, false, 0),
+			1:  Uint32Field("MinimumExpectedThroughputMinetr", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+			2:  Uint32Field("MaximumGammaDataRateMaxgdr", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
+			3:  Uint32Field("MinimumGammaDataRateMingdr", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3),
+			4:  Uint32Field("MaximumDelayDelaymax", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+			5:  Uint16Field("MinimumImpulseNoiseProtectionAgainstShineInpminShine", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+			6:  ByteField("ShineRatioShineratio", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
+			7:  ByteField("MinimumImpulseNoiseProtectionAgainstReinInpminRein", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
+			8:  ByteField("ReinInterArrivalTimeIatRein", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
+			9:  ByteField("MinimumReedSolomonRfecNfecRatioRnratio", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9),
+			10: ByteField("RtxTcTestmodeRtxTestmode", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+	}
+}
+
+// NewFastChannelConfigurationProfile (class ID 432) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewFastChannelConfigurationProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*fastchannelconfigurationprofileBME, params...)
+}