VOL-4337: Code upgrade for 3/2020 G.988 support and remaining Extended Message Set support
Change-Id: I6c5e1a167216ad9b51e9da89460e9909465ae1bc
diff --git a/generated/xdsllineinventoryandstatusdatapart1.go b/generated/xdsllineinventoryandstatusdatapart1.go
index 36eeea1..92dbed6 100644
--- a/generated/xdsllineinventoryandstatusdatapart1.go
+++ b/generated/xdsllineinventoryandstatusdatapart1.go
@@ -27,11 +27,11 @@
// XdslLineInventoryAndStatusDataPart1ClassID is the 16-bit ID for the OMCI
// Managed entity xDSL line inventory and status data part 1
-const XdslLineInventoryAndStatusDataPart1ClassID ClassID = ClassID(100)
+const XdslLineInventoryAndStatusDataPart1ClassID = ClassID(100) // 0x0064
var xdsllineinventoryandstatusdatapart1BME *ManagedEntityDefinition
-// XdslLineInventoryAndStatusDataPart1 (class ID #100)
+// XdslLineInventoryAndStatusDataPart1 (Class ID: #100 / 0x0064)
// This ME contains part 1 of the line inventory and status data for an xDSL UNI. The ONU
// automatically creates or deletes an instance of this ME upon the creation or deletion of a PPTP
// xDSL UNI part 1.
@@ -41,9 +41,8 @@
//
// Attributes
// Managed Entity Id
-// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
-// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1. (R)
-// (mandatory) (2-bytes)
+// This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+// implicitly linked to an instance of the PPTP xDSL UNI part 1. (R) (mandatory) (2-bytes)
//
// Xtu_C G.994.1 Vendor Id
// xTU-C G.994.1 vendor ID: This is the vendor ID as inserted by the xTU-C in the ITUT-G.994.1 CL
@@ -118,16 +117,51 @@
// combination with [ITU-T G.994.1] and the system vendor ID. (R) (mandatory) (4-bytes)
//
// Xtu_C Transmission System Capability
+// xTU-C transmission system capability: This attribute lists xTUC transmission system
+// capabilities. It is a bit map, defined in Table 9.7.12-1. (R) (mandatory) (7-bytes)
+//
// NOTE 1 - This attribute is only 7-bytes long. An eighth byte identifying VDSL2 capabilities is
// defined in the VDSL2 line inventory and status data part 1 ME.
//
// Xtu_R Transmission System Capability
+// xTU-R transmission system capability: This attribute lists xTUR transmission system
+// capabilities. It is a bit map, defined in Table 9.7.121. (R) (mandatory) (7-bytes)
+//
// NOTE 2 - This attribute is only 7-bytes long. An eighth byte identifying VDSL2 capabilities is
// defined in the VDSL2 line inventory and status data part 2 ME.
//
// Initialization Success_Failure Cause
// (R) (mandatory) (1-byte)
//
+// Initialization success/failure cause: This parameter represents the success or failure cause of
+// the last full initialization performed on the line. It is coded as follows.
+//
+// 0 Successful
+//
+// 1 Configuration error
+//
+// This error occurs with inconsistencies in configuration parameters, e.g., when the line is
+// initialized in an xDSL transmission system whose xTU does not support the configured maximum
+// delay or the configured minimum or maximum data rate for one or more bearer channels.
+//
+// 2 Configuration not feasible on the line
+//
+// This error occurs if the minimum data rate cannot be achieved on the line with the minimum noise
+// margin, maximum PSD level, maximum delay and maximum bit error ratio for one or more bearer
+// channels.
+//
+// 3 Communication problem
+//
+// This error occurs, for example, due to corrupted messages, bad syntax messages, if no common
+// mode can be selected in the ITUT-G.994.1 handshake procedure or due to a timeout.
+//
+// 4 No peer xTU detected
+//
+// This error occurs if the peer xTU is not powered or not connected or if the line is too long to
+// allow detection of a peer xTU.
+//
+// 5 Any other or unknown initialization failure cause.
+//
type XdslLineInventoryAndStatusDataPart1 struct {
ManagedEntityDefinition
Attributes AttributeValueMap