diff --git a/generated/rtpprofiledata.go b/generated/rtpprofiledata.go
index 0eb13aa..1bc4f00 100644
--- a/generated/rtpprofiledata.go
+++ b/generated/rtpprofiledata.go
@@ -27,11 +27,11 @@
 
 // RtpProfileDataClassID is the 16-bit ID for the OMCI
 // Managed entity RTP profile data
-const RtpProfileDataClassID ClassID = ClassID(143)
+const RtpProfileDataClassID = ClassID(143) // 0x008f
 
 var rtpprofiledataBME *ManagedEntityDefinition
 
-// RtpProfileData (class ID #143)
+// RtpProfileData (Class ID: #143 / 0x008f)
 //	This ME configures RTP. It is conditionally required for ONUs that offer VoIP service. If a non-
 //	OMCI interface is used to manage VoIP, this ME is unnecessary.
 //
@@ -43,41 +43,68 @@
 //
 //	Attributes
 //		Managed Entity Id
-//			Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
-//			(mandatory) (2-bytes)
+//			This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory)
+//			(2-bytes)
 //
 //		Local Port Min
-//			Local port min: This attribute defines the base UDP port that should be used by RTP for voice
-//			traffic. The recommended default is 50000 (R,-W, set-by-create) (mandatory) (2-bytes)
+//			This attribute defines the base UDP port that should be used by RTP for voice traffic. The
+//			recommended default is 50000 (R,-W, set-by-create) (mandatory) (2-bytes)
 //
 //		Local Port Max
-//			Local port max: This attribute defines the highest UDP port used by RTP for voice traffic. The
-//			value must be greater than the local port minimum. The value 0 specifies that the local port
-//			maximum be equal to the local port minimum. (R,-W, set-by-create) (optional) (2-bytes)
+//			This attribute defines the highest UDP port used by RTP for voice traffic. The value must be
+//			greater than the local port minimum. The value 0 specifies that the local port maximum be equal
+//			to the local port minimum. (R,-W, set-by-create) (optional) (2-bytes)
 //
 //		Dscp Mark
-//			DSCP mark:	Diffserv code point to be used for outgoing RTP packets for this profile. The
-//			recommended default value is expedited forwarding (EF)-= 0x2E. (R,-W, setbycreate) (mandatory)
-//			(1-byte)
+//			Diffserv code point to be used for outgoing RTP packets for this profile. The recommended
+//			default value is expedited forwarding (EF)-= 0x2E. (R,-W, setbycreate) (mandatory) (1-byte)
 //
 //		Piggyback Events
+//			0	Disabled (recommended default)
+//
+//			1	Enabled
+//
 //			(R,-W, setbycreate) (mandatory) (1-byte)
 //
+//			Enables or disables RTP piggyback events.
+//
 //		Tone Events
+//			Enables or disables the handling of tones via RTP tone events per [IETF RFC 4733], (see also
+//			[IETF RFC 4734]).
+//
+//			0	Disabled (recommended default)
+//
+//			1	Enabled
+//
 //			(R,-W, setbycreate) (mandatory) (1-byte)
 //
 //		Dtmf Events
+//			0	Disabled
+//
+//			1	Enabled
+//
 //			(R,-W, setbycreate) (mandatory) (1-byte)
 //
+//			Enables or disables the handling of DTMF via RTP DTMF events per [IETF-RFC 4733], (see also
+//			[IETF RFC 4734]). This attribute is ignored unless the OOB DTMF attribute in the VoIP media
+//			profile is enabled.
+//
 //		Cas Events
+//			Enables or disables the handling of CAS via RTP CAS events per [IETF-RFC-4733], (see also [IETF
+//			RFC 4734]).
+//
+//			0	Disabled
+//
+//			1	Enabled
+//
 //			(R,-W, setbycreate) (mandatory) (1-byte)
 //
 //		Ip Host Config Pointer
-//			IP host config pointer: This optional pointer associates the bearer (voice) flow with an IP host
-//			config data or IPv6 host config data ME. If this attribute is not present or is not populated
-//			with a valid pointer value, the bearer flow uses the same IP stack that is used for signalling,
-//			indicated by the TCP/UDP pointer in the associated SIP agent or MGC config data. The default
-//			value is 0xFFFF, a null pointer. (R,-W) (optional) (2-bytes)
+//			This optional pointer associates the bearer (voice) flow with an IP host config data or IPv6
+//			host config data ME. If this attribute is not present or is not populated with a valid pointer
+//			value, the bearer flow uses the same IP stack that is used for signalling, indicated by the
+//			TCP/UDP pointer in the associated SIP agent or MGC config data. The default value is 0xFFFF, a
+//			null pointer. (R,-W) (optional) (2-bytes)
 //
 type RtpProfileData struct {
 	ManagedEntityDefinition