diff --git a/generated/recommonamplifierparameters.go b/generated/recommonamplifierparameters.go
index bc83606..d5149b9 100644
--- a/generated/recommonamplifierparameters.go
+++ b/generated/recommonamplifierparameters.go
@@ -27,11 +27,11 @@
 
 // ReCommonAmplifierParametersClassID is the 16-bit ID for the OMCI
 // Managed entity RE common amplifier parameters
-const ReCommonAmplifierParametersClassID ClassID = ClassID(328)
+const ReCommonAmplifierParametersClassID = ClassID(328) // 0x0148
 
 var recommonamplifierparametersBME *ManagedEntityDefinition
 
-// ReCommonAmplifierParameters (class ID #328)
+// ReCommonAmplifierParameters (Class ID: #328 / 0x0148)
 //	This ME organizes data associated with each OA supported by the RE. The management ONU
 //	automatically creates one instance of this ME for each upstream or downstream OA.
 //
@@ -41,66 +41,66 @@
 //
 //	Attributes
 //		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+//			implicitly linked to an instance of an upstream or downstream OA. The first byte is the slot ID
+//			(defined in clause 9.1.5). The second byte is the port ID. (R)-(mandatory) (2-bytes)
+//
 //			NOTE - The type of the linked ME can be determined by uniqueness of slot and port.
 //
 //		Gain
-//			Gain:	This attribute reports the current measurement of the OA's gain, in decibels. Its value is
-//			a 2s complement integer with 0.25-dB granularity, and with a range from -32-dB to 31.5-dB. The
-//			value 0x7F indicates that the current measured gain is 0, i.e., negative infinity in decibels
-//			terms. (R) (optional) (1-byte)
+//			This attribute reports the current measurement of the OA's gain, in decibels. Its value is a 2s
+//			complement integer with 0.25-dB granularity, and with a range from -32-dB to 31.5-dB. The value
+//			0x7F indicates that the current measured gain is 0, i.e., negative infinity in decibels terms.
+//			(R) (optional) (1-byte)
 //
 //		Lower Gain Threshold
-//			Lower gain threshold: This attribute specifies the gain the RE uses to declare the low gain
-//			alarm. Valid values are 0-dB (coded as 0x00) to 63.5-dB (coded as 0xFE). The default value 0xFF
-//			selects the RE's internal policy. (R,-W) (optional) (1-byte)
+//			This attribute specifies the gain the RE uses to declare the low gain alarm. Valid values are
+//			0-dB (coded as 0x00) to 63.5-dB (coded as 0xFE). The default value 0xFF selects the RE's
+//			internal policy. (R,-W) (optional) (1-byte)
 //
 //		Upper Gain Threshold
-//			Upper gain threshold: This attribute specifies the gain the RE uses to declare the high gain
-//			alarm. Valid values are 0-dB (coded as 0x00) to 63.5-dB (coded as 0xFE). The default value 0xFF
-//			selects the RE's internal policy. (R,-W) (optional) (1-byte)
+//			This attribute specifies the gain the RE uses to declare the high gain alarm. Valid values are
+//			0-dB (coded as 0x00) to 63.5-dB (coded as 0xFE). The default value 0xFF selects the RE's
+//			internal policy. (R,-W) (optional) (1-byte)
 //
 //		Target Gain
-//			Target gain:	This attribute specifies the target gain, when the operational mode of the parent
-//			RE downstream or upstream amplifier is set to constant gain mode. Valid values are 0-dB (coded
-//			as 0x00) to 63.5-dB (coded as 0xFE). The default value 0xFF selects the RE's internal policy.
-//			(R,-W) (optional) (1-byte)
-//
-//		Device Temperature
-//			Device temperature: This attribute reports the temperature in degrees Celcius of the active
-//			device (SOA or pump) in the OA. Its value is a 2s complement integer with granularity
-//			1/256-degree-C. (R) (optional) (2-bytes)
-//
-//		Lower Device Temperature Threshold
-//			Lower device temperature threshold: This attribute is a 2s complement integer that specifies the
-//			temperature the RE uses to declare the low temperature alarm. Valid values are -64 to
-//			+63-degree-C in 0.5-degree-C increments. The default value 0x7F selects the RE's internal
-//			policy. (R,-W) (optional) (1-byte)
-//
-//		Upper Device Temperature Threshold
-//			Upper device temperature threshold: This attribute is a 2s complement integer that specifies the
-//			temperature the RE uses to declare the high temperature alarm. Valid values are -64 to
-//			+63-degree-C in 0.5-degree-C increments. The default value 0x7F selects the RE's internal
-//			policy. (R,-W) (optional) (1-byte)
-//
-//		Device Bias Current
-//			Device bias current: This attribute contains the measured bias current applied to the SOA or
-//			pump laser. Its value is an unsigned integer with granularity 2-mA. Valid values are 0 to
-//			512-mA. (R) (optional) (1-byte)
-//
-//		Amplifier Saturation Output Power
-//			Amplifier saturation output power: This attribute reports the saturation output power of the
-//			amplifier as specified by the manufacturer. Its value is an unsigned integer referred to 1-mW
-//			(i.e., dBm), with 0.1-dB granularity. (R) (optional) (2-bytes)
-//
-//		Amplifier Noise Figure
-//			Amplifier noise figure: This attribute reports the intrinsic noise figure of the amplifier, as
-//			specified by the manufacturer. Its value is an unsigned integer with 0.1-dB granularity (R)
+//			This attribute specifies the target gain, when the operational mode of the parent RE downstream
+//			or upstream amplifier is set to constant gain mode. Valid values are 0-dB (coded as 0x00) to
+//			63.5-dB (coded as 0xFE). The default value 0xFF selects the RE's internal policy. (R,-W)
 //			(optional) (1-byte)
 //
+//		Device Temperature
+//			This attribute reports the temperature in degrees Celcius of the active device (SOA or pump) in
+//			the OA. Its value is a 2s complement integer with granularity 1/256-degree-C. (R) (optional)
+//			(2-bytes)
+//
+//		Lower Device Temperature Threshold
+//			This attribute is a 2s complement integer that specifies the temperature the RE uses to declare
+//			the low temperature alarm. Valid values are -64 to +63-degree-C in 0.5-degree-C increments. The
+//			default value 0x7F selects the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Upper Device Temperature Threshold
+//			This attribute is a 2s complement integer that specifies the temperature the RE uses to declare
+//			the high temperature alarm. Valid values are -64 to +63-degree-C in 0.5-degree-C increments. The
+//			default value 0x7F selects the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Device Bias Current
+//			This attribute contains the measured bias current applied to the SOA or pump laser. Its value is
+//			an unsigned integer with granularity 2-mA. Valid values are 0 to 512-mA. (R) (optional) (1-byte)
+//
+//		Amplifier Saturation Output Power
+//			This attribute reports the saturation output power of the amplifier as specified by the
+//			manufacturer. Its value is an unsigned integer referred to 1-mW (i.e., dBm), with 0.1-dB
+//			granularity. (R) (optional) (2-bytes)
+//
+//		Amplifier Noise Figure
+//			This attribute reports the intrinsic noise figure of the amplifier, as specified by the
+//			manufacturer. Its value is an unsigned integer with 0.1-dB granularity (R) (optional) (1-byte)
+//
 //		Amplifier Saturation Gain
-//			Amplifier saturation gain: This attribute reports the gain of the amplifier at saturation, as
-//			specified by the manufacturer. Its value is an unsigned integer with 0.25-dB granularity, and
-//			with a range from 0 to 63.75-dB. (R) (optional) (1-byte)
+//			This attribute reports the gain of the amplifier at saturation, as specified by the
+//			manufacturer. Its value is an unsigned integer with 0.25-dB granularity, and with a range from 0
+//			to 63.75-dB. (R) (optional) (1-byte)
 //
 type ReCommonAmplifierParameters struct {
 	ManagedEntityDefinition