Updated pipelines for Voltha-2.8 release
Change-Id: I53ca9a5418a73299165bbc00ad655288734fd35e
diff --git a/jjb/pipeline/voltha/voltha-2.8/bbsim-tests.groovy b/jjb/pipeline/voltha/voltha-2.8/bbsim-tests.groovy
new file mode 100755
index 0000000..8649916
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.8/bbsim-tests.groovy
@@ -0,0 +1,272 @@
+// Copyright 2021-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// voltha-2.x e2e tests for openonu-go
+// uses bbsim to simulate OLT/ONUs
+
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def clusterName = "kind-ci"
+
+def execute_test(testTarget, workflow, teardown, testSpecificHelmFlags = "") {
+ def infraNamespace = "default"
+ def volthaNamespace = "voltha"
+ def robotLogsDir = "RobotLogs"
+ stage('Cleanup') {
+ if (teardown) {
+ timeout(15) {
+ script {
+ helmTeardown(["default", infraNamespace, volthaNamespace])
+ }
+ timeout(1) {
+ sh returnStdout: false, script: '''
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+ '''
+ }
+ }
+ }
+ }
+ stage('Deploy Voltha') {
+ if (teardown) {
+ timeout(10) {
+ script {
+
+ sh """
+ mkdir -p $WORKSPACE/${testTarget}-components
+ _TAG=kail-startup kail -n ${infraNamespace} -n ${volthaNamespace} > $WORKSPACE/${testTarget}-components/onos-voltha-startup-combined.log &
+ """
+
+ // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+ def localCharts = false
+ if (gerritProject == "voltha-helm-charts" || branch != "master") {
+ localCharts = true
+ }
+
+ // NOTE temporary workaround expose ONOS node ports
+ def localHelmFlags = extraHelmFlags + " --set global.log_level=${logLevel.toUpperCase()} " +
+ " --set onos-classic.onosSshPort=30115 " +
+ " --set onos-classic.onosApiPort=30120 " +
+ " --set onos-classic.onosOfPort=31653 " +
+ " --set onos-classic.individualOpenFlowNodePorts=true " + testSpecificHelmFlags
+
+ if (gerritProject != "") {
+ localHelmFlags = "${localHelmFlags} " + getVolthaImageFlags("${gerritProject}")
+ }
+
+ volthaDeploy([
+ infraNamespace: infraNamespace,
+ volthaNamespace: volthaNamespace,
+ workflow: workflow.toLowerCase(),
+ extraHelmFlags: localHelmFlags,
+ localCharts: localCharts,
+ bbsimReplica: olts.toInteger(),
+ dockerRegistry: registry,
+ ])
+ }
+
+ // stop logging
+ sh """
+ P_IDS="\$(ps e -ww -A | grep "_TAG=kail-startup" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_IDS" ]; then
+ echo \$P_IDS
+ for P_ID in \$P_IDS; do
+ kill -9 \$P_ID
+ done
+ fi
+ cd $WORKSPACE/${testTarget}-components/
+ gzip -k onos-voltha-startup-combined.log
+ rm onos-voltha-startup-combined.log
+ """
+ }
+ sh """
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-infra-etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-infra-kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+ bbsimDmiPortFwd=50075
+ for i in {0..${olts.toInteger() - 1}}; do
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG="bbsim\${i}" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/bbsim\${i} \${bbsimDmiPortFwd}:50075; done"&
+ ((bbsimDmiPortFwd++))
+ done
+ ps aux | grep port-forward
+ """
+ }
+ }
+ stage('Run test ' + testTarget + ' on ' + workflow + ' workFlow') {
+ // start logging
+ sh """
+ mkdir -p $WORKSPACE/${testTarget}-components
+ _TAG=kail-${workflow} kail -n ${infraNamespace} -n ${volthaNamespace} > $WORKSPACE/${testTarget}-components/onos-voltha-combined.log &
+ """
+ sh """
+ mkdir -p $WORKSPACE/${robotLogsDir}/${testTarget}-robot
+ export ROBOT_MISC_ARGS="-d $WORKSPACE/${robotLogsDir}/${testTarget}-robot "
+ ROBOT_MISC_ARGS+="-v ONOS_SSH_PORT:30115 -v ONOS_REST_PORT:30120 -v INFRA_NAMESPACE:${infraNamespace}"
+ export KVSTOREPREFIX=voltha/voltha_voltha
+
+ make -C $WORKSPACE/voltha-system-tests ${testTarget} || true
+ """
+ // stop logging
+ sh """
+ P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${workflow}" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_IDS" ]; then
+ echo \$P_IDS
+ for P_ID in \$P_IDS; do
+ kill -9 \$P_ID
+ done
+ fi
+ cd $WORKSPACE/${testTarget}-components/
+ rm onos-voltha-combined.log.gz || true
+ gzip -k onos-voltha-combined.log
+ rm onos-voltha-combined.log
+ """
+ getPodsInfo("$WORKSPACE/${testTarget}-components")
+ }
+}
+
+def collectArtifacts(exitStatus) {
+ getPodsInfo("$WORKSPACE/${exitStatus}")
+ sh """
+ kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/${exitStatus}/voltha.log || true
+ """
+ archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.txt,**/*.html'
+ sh '''
+ sync
+ pkill kail || true
+ which voltctl
+ md5sum $(which voltctl)
+ '''
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: "RobotLogs/*/log*.html",
+ otherFiles: '',
+ outputFileName: "RobotLogs/*/output*.xml",
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: "RobotLogs/*/report*.html",
+ unstableThreshold: 0,
+ onlyCritical: true]);
+}
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: "${timeout}", unit: 'MINUTES')
+ }
+ environment {
+ KUBECONFIG="$HOME/.kube/kind-${clusterName}"
+ VOLTCONFIG="$HOME/.volt/config"
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+ ROBOT_MISC_ARGS="-e PowerSwitch ${params.extraRobotArgs}"
+ DIAGS_PROFILE="VOLTHA_PROFILE"
+ }
+ stages {
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${branch}",
+ gerritProject: "${gerritProject}",
+ gerritRefspec: "${gerritRefspec}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage('Build patch') {
+ // build the patch only if gerritProject is specified
+ when {
+ expression {
+ return !gerritProject.isEmpty()
+ }
+ }
+ steps {
+ // NOTE that the correct patch has already been checked out
+ // during the getVolthaCode step
+ buildVolthaComponent("${gerritProject}")
+ }
+ }
+ stage('Create K8s Cluster') {
+ steps {
+ script {
+ def clusterExists = sh returnStdout: true, script: """
+ kind get clusters | grep ${clusterName} | wc -l
+ """
+ if (clusterExists.trim() == "0") {
+ createKubernetesCluster([nodes: 3, name: clusterName])
+ }
+ }
+ }
+ }
+ stage('Replace voltctl') {
+ // if the project is voltctl override the downloaded one with the built one
+ when {
+ expression {
+ return gerritProject == "voltctl"
+ }
+ }
+ steps{
+ sh """
+ mv `ls $WORKSPACE/voltctl/release/voltctl-*-linux-amd*` $WORKSPACE/bin/voltctl
+ chmod +x $WORKSPACE/bin/voltctl
+ """
+ }
+ }
+ stage('Load image in kind nodes') {
+ when {
+ expression {
+ return !gerritProject.isEmpty()
+ }
+ }
+ steps {
+ loadToKind()
+ }
+ }
+ stage('Parse and execute tests') {
+ steps {
+ script {
+ def tests = readYaml text: testTargets
+
+ for(int i = 0;i<tests.size();i++) {
+ def test = tests[i]
+ def target = test["target"]
+ def workflow = test["workflow"]
+ def flags = test["flags"]
+ def teardown = test["teardown"].toBoolean()
+ println "Executing test ${target} on workflow ${workflow} with extra flags ${flags}"
+ execute_test(target, workflow, teardown, flags)
+ }
+ }
+ }
+ }
+ }
+ post {
+ aborted {
+ collectArtifacts("aborted")
+ }
+ failure {
+ collectArtifacts("failed")
+ }
+ always {
+ collectArtifacts("always")
+ }
+ }
+}
diff --git a/jjb/pipeline/voltha/voltha-2.8/device-management-mock-tests.groovy b/jjb/pipeline/voltha/voltha-2.8/device-management-mock-tests.groovy
new file mode 100644
index 0000000..8a15ac6
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.8/device-management-mock-tests.groovy
@@ -0,0 +1,172 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def localCharts = false
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 90, unit: 'MINUTES')
+ }
+ environment {
+ KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+ ROBOT_MISC_ARGS="-d $WORKSPACE/RobotLogs"
+ }
+
+ stages {
+
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${branch}",
+ gerritProject: "${gerritProject}",
+ gerritRefspec: "${gerritRefspec}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage('Build Redfish Importer Image') {
+ steps {
+ sh """
+ make -C $WORKSPACE/device-management/\$1 DOCKER_REPOSITORY=opencord/ DOCKER_TAG=citest docker-build-importer
+ """
+ }
+ }
+ stage('Build demo_test Image') {
+ steps {
+ sh """
+ make -C $WORKSPACE/device-management/\$1/demo_test DOCKER_REPOSITORY=opencord/ DOCKER_TAG=citest docker-build
+ """
+ }
+ }
+ stage('Build mock-redfish-server Image') {
+ steps {
+ sh """
+ make -C $WORKSPACE/device-management/\$1/mock-redfish-server DOCKER_REPOSITORY=opencord/ DOCKER_TAG=citest docker-build
+ """
+ }
+ }
+ stage('Create K8s Cluster') {
+ steps {
+ createKubernetesCluster([nodes: 3])
+ }
+ }
+ stage('Load image in kind nodes') {
+ steps {
+ loadToKind()
+ }
+ }
+ stage('Deploy Voltha') {
+ steps {
+ script {
+ if (branch != "master" || volthaHelmChartsChange != "") {
+ // if we're using a release or testing changes in the charts, then use the local clone
+ localCharts = true
+ }
+ }
+ volthaDeploy([
+ workflow: "att",
+ extraHelmFlags: extraHelmFlags,
+ dockerRegistry: "mirror.registry.opennetworking.org",
+ localCharts: localCharts,
+ ])
+ // start logging
+ sh """
+ mkdir -p $WORKSPACE/att
+ _TAG=kail-att kail -n infra -n voltha -n default > $WORKSPACE/att/onos-voltha-combined.log &
+ """
+ // forward ONOS and VOLTHA ports
+ sh """
+ _TAG=onos-port-forward kubectl port-forward --address 0.0.0.0 -n infra svc/voltha-infra-onos-classic-hs 8101:8101&
+ _TAG=onos-port-forward kubectl port-forward --address 0.0.0.0 -n infra svc/voltha-infra-onos-classic-hs 8181:8181&
+ _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n voltha svc/voltha-voltha-api 55555:55555&
+ """
+ }
+ }
+
+ stage('Run E2E Tests') {
+ steps {
+ sh '''
+ mkdir -p $WORKSPACE/RobotLogs
+
+ # tell the kubernetes script to use images tagged citest and pullPolicy:Never
+ sed -i 's/master/citest/g' $WORKSPACE/device-management/kubernetes/deploy*.yaml
+ sed -i 's/imagePullPolicy: Always/imagePullPolicy: Never/g' $WORKSPACE/device-management/kubernetes/deploy*.yaml
+ make -C $WORKSPACE/device-management functional-mock-test || true
+ '''
+ }
+ }
+ }
+
+ post {
+ always {
+ sh '''
+ set +e
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq
+ kubectl get nodes -o wide
+ kubectl get pods -o wide --all-namespaces
+
+ sync
+ pkill kail || true
+
+ ## Pull out errors from log files
+ extract_errors_go() {
+ echo
+ echo "Error summary for $1:"
+ grep $1 $WORKSPACE/att/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
+ echo
+ }
+
+ extract_errors_python() {
+ echo
+ echo "Error summary for $1:"
+ grep $1 $WORKSPACE/att/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
+ echo
+ }
+
+ extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
+ extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
+ extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
+ extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
+
+ gzip $WORKSPACE/att/onos-voltha-combined.log
+ '''
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/log*.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/output*.xml',
+ outputPath: '.',
+ passThreshold: 80,
+ reportFileName: 'RobotLogs/report*.html',
+ unstableThreshold: 0]);
+ archiveArtifacts artifacts: '**/*.log,**/*.gz'
+ }
+ }
+}
diff --git a/jjb/pipeline/voltha/voltha-2.8/physical-build.groovy b/jjb/pipeline/voltha/voltha-2.8/physical-build.groovy
new file mode 100644
index 0000000..9ea7387
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.8/physical-build.groovy
@@ -0,0 +1,384 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// used to deploy VOLTHA and configure ONOS physical PODs
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 35, unit: 'MINUTES')
+ }
+ environment {
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+ KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+ }
+
+ stages{
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${branch}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage ("Parse deployment configuration file") {
+ steps {
+ sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+ sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
+ script {
+ if ( params.workFlow == "DT" ) {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+ }
+ else if ( params.workFlow == "TT" )
+ {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ }
+ else
+ {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ }
+ }
+ }
+ stage('Clean up') {
+ steps {
+ timeout(15) {
+ script {
+ helmTeardown(["default", infraNamespace, volthaNamespace])
+ }
+ timeout(1) {
+ sh returnStdout: false, script: '''
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+ '''
+ }
+ }
+ }
+ }
+ stage('Install Voltha') {
+ steps {
+ timeout(20) {
+ script {
+ // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+ def localCharts = false
+ if (volthaHelmChartsChange != "" || branch != "master") {
+ localCharts = true
+ }
+
+ // should the config file be suffixed with the workflow? see "deployment_config"
+ def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
+
+ if (workFlow.toLowerCase() == "dt") {
+ localHelmFlags += " --set radius.enabled=false "
+ }
+ if (workFlow.toLowerCase() == "tt") {
+ localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
+ if (enableMultiUni.toBoolean()) {
+ localHelmFlags += " --set voltha-adapter-openonu.adapter_open_onu.uni_port_mask=${uniPortMask} "
+ }
+ }
+
+ // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+ // and to connect the ofagent to all instances of ONOS
+ localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " +
+ "--set onos-classic.onosApiPort=30120 " +
+ "--set onos-classic.onosOfPort=31653 " +
+ "--set onos-classic.individualOpenFlowNodePorts=true " +
+ "--set voltha.onos_classic.replicas=${params.NumOfOnos}"
+
+ if (bbsimReplicas.toInteger() != 0) {
+ localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
+ }
+
+ // adding user specified helm flags at the end so they'll have priority over everything else
+ localHelmFlags = localHelmFlags + " ${extraHelmFlags}"
+
+ volthaDeploy([
+ workflow: workFlow.toLowerCase(),
+ extraHelmFlags: localHelmFlags,
+ localCharts: localCharts,
+ kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+ onosReplica: params.NumOfOnos,
+ atomixReplica: params.NumOfAtomix,
+ kafkaReplica: params.NumOfKafka,
+ etcdReplica: params.NumOfEtcd,
+ bbsimReplica: bbsimReplicas.toInteger(),
+ ])
+ }
+ sh """
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+ ps aux | grep port-forward
+ """
+ getPodsInfo("$WORKSPACE")
+ }
+ }
+ }
+ stage('Push Tech-Profile') {
+ steps {
+ script {
+ if ( params.configurePod && params.profile != "Default" ) {
+ for(int i=0; i < deployment_config.olts.size(); i++) {
+ def tech_prof_directory = "XGS-PON"
+ // If no debian package is specified we default to GPON for the ADTRAN OLT.
+ if (!deployment_config.olts[i].containsKey("oltDebVersion") || deployment_config.olts[i].oltDebVersion.contains("asgvolt64")){
+ tech_prof_directory = "GPON"
+ }
+ timeout(1) {
+ sh returnStatus: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
+ if [[ "${workFlow}" == "TT" ]]; then
+ if [[ "${params.enableMultiUni}" == "true" ]]; then
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-HSIA.json \$etcd_container:/tmp/hsia.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-VoIP.json \$etcd_container:/tmp/voip.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
+ else
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
+ fi
+ else
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+ fi
+ """
+ }
+ timeout(1) {
+ sh returnStatus: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
+ """
+ }
+ }
+ }
+ }
+ }
+ }
+ stage('Push MIB templates') {
+ steps {
+ sh """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
+ """
+ }
+ }
+ stage('Push Sadis-config') {
+ steps {
+ timeout(1) {
+ sh returnStatus: true, script: """
+ if [[ "${workFlow}" == "DT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+ elif [[ "${workFlow}" == "TT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+ else
+ # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
+ fi
+ """
+ }
+ }
+ }
+ stage('Switch Configurations in ONOS') {
+ steps {
+ script {
+ if ( deployment_config.fabric_switches.size() > 0 ) {
+ timeout(1) {
+ def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
+ if (params.inBandManagement){
+ netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
+ }
+ sh """
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
+ curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
+ """
+ }
+ timeout(1) {
+ waitUntil {
+ sr_active_out = sh returnStatus: true, script: """
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
+ curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
+ """
+ return sr_active_out == 0
+ }
+ }
+ timeout(7) {
+ for(int i=0; i < deployment_config.hosts.src.size(); i++) {
+ for(int j=0; j < deployment_config.olts.size(); j++) {
+ def aggPort = -1
+ if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
+ aggPort = deployment_config.olts[j].aggPort
+ if(aggPort == -1){
+ throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
+ }
+ sh """
+ sleep 30 # NOTE why are we sleeping?
+ curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
+ """
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ stage('Reinstall OLT software') {
+ steps {
+ script {
+ if ( params.reinstallOlt ) {
+ for(int i=0; i < deployment_config.olts.size(); i++) {
+ // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
+ sh returnStdout: true, script: """
+ if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
+ fi
+ if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
+ fi
+ if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
+ fi
+ if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
+ fi
+ sleep 10
+ """
+ timeout(5) {
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: """
+ if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
+ else
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
+ fi
+ if (${deployment_config.olts[i].fortygig}); then
+ if [[ "${params.inBandManagement}" == "true" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
+ fi
+ fi
+ """
+ return olt_sw_present.toInteger() > 0
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ stage('Restart OLT processes') {
+ steps {
+ script {
+ for(int i=0; i < deployment_config.olts.size(); i++) {
+ int waitTimerForOltUp = 360
+ if ( params.inBandManagement ) {
+ waitTimerForOltUp = 540
+ }
+ timeout(15) {
+ sh returnStdout: true, script: """
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true
+ sleep ${waitTimerForOltUp}
+ """
+ }
+ timeout(15) {
+ waitUntil {
+ devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
+ return devprocess.toInteger() > 0
+ }
+ }
+ timeout(15) {
+ waitUntil {
+ openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
+ return openoltprocess.toInteger() > 0
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+
+ post {
+ aborted {
+ getPodsInfo("$WORKSPACE/failed")
+ sh """
+ kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.log || true
+ """
+ archiveArtifacts artifacts: '**/*.log,**/*.txt'
+ }
+ failure {
+ getPodsInfo("$WORKSPACE/failed")
+ sh """
+ kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.logs || true
+ """
+ archiveArtifacts artifacts: '**/*.log,**/*.txt'
+ }
+ always {
+ archiveArtifacts artifacts: '*.txt'
+ }
+ }
+}
diff --git a/jjb/pipeline/voltha/voltha-2.8/software-upgrades.groovy b/jjb/pipeline/voltha/voltha-2.8/software-upgrades.groovy
new file mode 100644
index 0000000..285fac1
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.8/software-upgrades.groovy
@@ -0,0 +1,245 @@
+// Copyright 2021-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// voltha-2.x e2e tests
+// uses bbsim to simulate OLT/ONUs
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+def test_software_upgrade(name) {
+ stage('Deploy Voltha - '+ name) {
+ def extraHelmFlags = "${extraHelmFlags} --set global.log_level=DEBUG,onu=1,pon=1 --set onos-classic.replicas=3,onos-classic.atomix.replicas=3 "
+ if ("${name}" == "onos-app-upgrade" || "${name}" == "onu-software-upgrade") {
+ extraHelmFlags = extraHelmFlags + "--set global.image_tag=master --set onos-classic.image.tag=master "
+ }
+ if ("${name}" == "voltha-component-upgrade") {
+ extraHelmFlags = extraHelmFlags + "--set images.onos_config_loader.tag=master-onos-config-loader --set onos-classic.image.tag=master "
+ }
+ extraHelmFlags = extraHelmFlags + " --set onos-classic.onosSshPort=30115 --set onos-classic.onosApiPort=30120 "
+ extraHelmFlags = extraHelmFlags + " --set voltha.onos_classic.replicas=3"
+ //ONOS custom image handling
+ if ( onosImg.trim() != '' ) {
+ String[] split;
+ onosImg = onosImg.trim()
+ split = onosImg.split(':')
+ extraHelmFlags = extraHelmFlags + "--set onos-classic.image.repository=" + split[0] +",onos-classic.image.tag=" + split[1] + " "
+ }
+ def localCharts = false
+ if (branch != "master") {
+ localCharts = true
+ }
+ // Currently only testing with ATT workflow
+ // TODO: Support for other workflows
+ volthaDeploy([workflow: "att", extraHelmFlags: extraHelmFlags, localCharts: localCharts])
+ // start logging
+ sh """
+ rm -rf $WORKSPACE/${name} || true
+ mkdir -p $WORKSPACE/${name}
+ _TAG=kail-${name} kail -n infra -n voltha > $WORKSPACE/${name}/onos-voltha-combined.log &
+ """
+ // forward ONOS and VOLTHA ports
+ sh """
+ _TAG=onos-port-forward bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n infra svc/voltha-infra-onos-classic-hs 8101:8101; done &"
+ _TAG=onos-port-forward bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n infra svc/voltha-infra-onos-classic-hs 8181:8181; done &"
+ _TAG=port-forward-voltha-api bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n voltha svc/voltha-voltha-api 55555:55555; done &"
+ """
+ sh """
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set DEBUG org.opencord
+ """
+ }
+ stage('Test - '+ name) {
+ sh """
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/${name}"
+ mkdir -p \$ROBOT_LOGS_DIR
+ if [[ ${name} == 'onos-app-upgrade' ]]; then
+ export ONOS_APPS_UNDER_TEST+=''
+ if [ ${aaaVer.trim()} != '' ] && [ ${aaaOarUrl.trim()} != '' ]; then
+ ONOS_APPS_UNDER_TEST+="org.opencord.aaa,${aaaVer.trim()},${aaaOarUrl.trim()}*"
+ fi
+ if [ ${oltVer.trim()} != '' ] && [ ${oltOarUrl.trim()} != '' ]; then
+ ONOS_APPS_UNDER_TEST+="org.opencord.olt,${oltVer.trim()},${oltOarUrl.trim()}*"
+ fi
+ if [ ${dhcpl2relayVer.trim()} != '' ] && [ ${dhcpl2relayOarUrl.trim()} != '' ]; then
+ ONOS_APPS_UNDER_TEST+="org.opencord.dhcpl2relay,${dhcpl2relayVer.trim()},${dhcpl2relayOarUrl.trim()}*"
+ fi
+ if [ ${igmpproxyVer.trim()} != '' ] && [ ${igmpproxyOarUrl.trim()} != '' ]; then
+ ONOS_APPS_UNDER_TEST+="org.opencord.igmpproxy,${igmpproxyVer.trim()},${igmpproxyOarUrl.trim()}*"
+ fi
+ if [ ${sadisVer.trim()} != '' ] && [ ${sadisOarUrl.trim()} != '' ]; then
+ ONOS_APPS_UNDER_TEST+="org.opencord.sadis,${sadisVer.trim()},${sadisOarUrl.trim()}*"
+ fi
+ if [ ${mcastVer.trim()} != '' ] && [ ${mcastOarUrl.trim()} != '' ]; then
+ ONOS_APPS_UNDER_TEST+="org.opencord.mcast,${mcastVer.trim()},${mcastOarUrl.trim()}*"
+ fi
+ if [ ${kafkaVer.trim()} != '' ] && [ ${kafkaOarUrl.trim()} != '' ]; then
+ ONOS_APPS_UNDER_TEST+="org.opencord.kafka,${kafkaVer.trim()},${kafkaOarUrl.trim()}*"
+ fi
+ export ROBOT_MISC_ARGS="-d \$ROBOT_LOGS_DIR -v onos_apps_under_test:\$ONOS_APPS_UNDER_TEST -e PowerSwitch"
+ export TARGET=onos-app-upgrade-test
+ fi
+ if [[ ${name} == 'voltha-component-upgrade' ]]; then
+ export VOLTHA_COMPS_UNDER_TEST+=''
+ if [ ${adapterOpenOltImage.trim()} != '' ]; then
+ VOLTHA_COMPS_UNDER_TEST+="adapter-open-olt,adapter-open-olt,${adapterOpenOltImage.trim()}*"
+ fi
+ if [ ${adapterOpenOnuImage.trim()} != '' ]; then
+ VOLTHA_COMPS_UNDER_TEST+="adapter-open-onu,adapter-open-onu,${adapterOpenOnuImage.trim()}*"
+ fi
+ if [ ${rwCoreImage.trim()} != '' ]; then
+ VOLTHA_COMPS_UNDER_TEST+="rw-core,voltha,${rwCoreImage.trim()}*"
+ fi
+ if [ ${ofAgentImage.trim()} != '' ]; then
+ VOLTHA_COMPS_UNDER_TEST+="ofagent,ofagent,${ofAgentImage.trim()}*"
+ fi
+ export ROBOT_MISC_ARGS="-d \$ROBOT_LOGS_DIR -v voltha_comps_under_test:\$VOLTHA_COMPS_UNDER_TEST -e PowerSwitch"
+ export TARGET=voltha-comp-upgrade-test
+ fi
+ if [[ ${name} == 'onu-software-upgrade' ]]; then
+ export ROBOT_MISC_ARGS="-d \$ROBOT_LOGS_DIR -v image_version:${onuImageVersion.trim()} -v image_url:${onuImageUrl.trim()} -v image_vendor:${onuImageVendor.trim()} -v image_activate_on_success:${onuImageActivateOnSuccess.trim()} -v image_commit_on_success:${onuImageCommitOnSuccess.trim()} -v image_crc:${onuImageCrc.trim()} -e PowerSwitch"
+ export TARGET=onu-upgrade-test
+ fi
+ export VOLTCONFIG=$HOME/.volt/config-minimal
+ export KUBECONFIG=$HOME/.kube/kind-config-voltha-minimal
+ ROBOT_MISC_ARGS+=" -v ONOS_SSH_PORT:30115 -v ONOS_REST_PORT:30120"
+ # Run the specified tests
+ make -C $WORKSPACE/voltha-system-tests \$TARGET || true
+ """
+ // stop logging
+ sh """
+ P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${name}" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_IDS" ]; then
+ echo \$P_IDS
+ for P_ID in \$P_IDS; do
+ kill -9 \$P_ID
+ done
+ fi
+ """
+ // remove port-forwarding
+ sh """
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 || true
+ """
+ // collect pod details
+ get_pods_info("$WORKSPACE/${name}")
+ helmTeardown(['infra', 'voltha'])
+ }
+}
+def get_pods_info(dest) {
+ // collect pod details, this is here in case of failure
+ sh """
+ mkdir -p ${dest} || true
+ kubectl get pods --all-namespaces -o wide > ${dest}/pods.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee ${dest}/pod-images.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee ${dest}/pod-imagesId.txt || true
+ kubectl describe pods --all-namespaces -l app.kubernetes.io/part-of=voltha > ${dest}/voltha-pods-describe.txt
+ kubectl describe pods -n infra -l app=onos-classic > ${dest}/onos-pods-describe.txt
+ helm ls --all-namespaces > ${dest}/helm-charts.txt
+ """
+ sh '''
+ # copy the ONOS logs directly from the container to avoid the color codes
+ printf '%s\\n' $(kubectl get pods -n infra -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c 'kubectl -n infra cp #:apache-karaf-4.2.9/data/log/karaf.log ''' + dest + '''/#.log' || true
+ '''
+}
+pipeline {
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 60, unit: 'MINUTES')
+ }
+ environment {
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+ KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
+ SSHPASS="karaf"
+ }
+ stages{
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${branch}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage('Cleanup') {
+ steps {
+ // remove port-forwarding
+ sh """
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 || true
+ """
+ helmTeardown(['infra', 'voltha'])
+ }
+ }
+ stage('Install latest voltctl') {
+ steps {
+ sh """
+ mkdir -p $WORKSPACE/bin || true
+ # install voltctl
+ HOSTOS="\$(uname -s | tr "[:upper:]" "[:lower:"])"
+ HOSTARCH="\$(uname -m | tr "[:upper:]" "[:lower:"])"
+ if [ "\$HOSTARCH" == "x86_64" ]; then
+ HOSTARCH="amd64"
+ fi
+ VC_VERSION="\$(curl --fail -sSL https://api.github.com/repos/opencord/voltctl/releases/latest | jq -r .tag_name | sed -e 's/^v//g')"
+ curl -Lo $WORKSPACE/bin/voltctl https://github.com/opencord/voltctl/releases/download/v\$VC_VERSION/voltctl-\$VC_VERSION-\$HOSTOS-\$HOSTARCH
+ chmod +x $WORKSPACE/bin/voltctl
+ """
+ }
+ }
+ stage('Create K8s Cluster') {
+ steps {
+ createKubernetesCluster([nodes: 3])
+ }
+ }
+ stage('Run Test') {
+ steps {
+ test_software_upgrade("onos-app-upgrade")
+ test_software_upgrade("voltha-component-upgrade")
+ test_software_upgrade("onu-software-upgrade")
+ }
+ }
+ }
+ post {
+ aborted {
+ get_pods_info("$WORKSPACE/failed")
+ }
+ failure {
+ get_pods_info("$WORKSPACE/failed")
+ }
+ always {
+ sh '''
+ gzip $WORKSPACE/onos-app-upgrade/onos-voltha-combined.log || true
+ gzip $WORKSPACE/voltha-component-upgrade/onos-voltha-combined.log || true
+ gzip $WORKSPACE/onu-software-upgrade/onos-voltha-combined.log || true
+ '''
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/*/log*.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/*/output*.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/*/report*.html',
+ unstableThreshold: 0,
+ onlyCritical: true]);
+ archiveArtifacts artifacts: '*.log,**/*.log,**/*.gz,*.gz,*.txt,**/*.txt'
+ }
+ }
+}
diff --git a/jjb/pipeline/voltha/voltha-2.8/tucson-build-and-test.groovy b/jjb/pipeline/voltha/voltha-2.8/tucson-build-and-test.groovy
new file mode 100644
index 0000000..629ed74
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.8/tucson-build-and-test.groovy
@@ -0,0 +1,364 @@
+
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// used to deploy VOLTHA and configure ONOS physical PODs
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+def clusterName = "kind-ci"
+pipeline {
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 120, unit: 'MINUTES')
+ }
+ environment {
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+ KUBECONFIG="$HOME/.kube/kind-${clusterName}"
+ VOLTCONFIG="$HOME/.volt/config"
+ LOG_FOLDER="$WORKSPACE/${workflow}/"
+ APPS_TO_LOG="etcd kafka onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server onos-config-loader"
+
+ }
+ stages{
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${branch}",
+ gerritProject: "${gerritProject}",
+ gerritRefspec: "${gerritRefspec}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage ("Parse deployment configuration file") {
+ steps {
+ sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+ sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
+ script {
+
+ if (params.workflow.toUpperCase() == "TT") {
+ error("The Tucson POD does not support TT workflow at the moment")
+ }
+
+ if ( params.workflow.toUpperCase() == "DT" ) {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+ }
+ else if ( params.workflow.toUpperCase() == "TT" ) {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ }
+ else {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ }
+ }
+ }
+ stage('Clean up') {
+ steps {
+ timeout(15) {
+ script {
+ helmTeardown(["default", infraNamespace, volthaNamespace])
+ }
+ timeout(1) {
+ sh returnStdout: false, script: '''
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+ '''
+ }
+ }
+ }
+ }
+ stage('Build patch') {
+ steps {
+ // NOTE that the correct patch has already been checked out
+ // during the getVolthaCode step
+ buildVolthaComponent("${gerritProject}")
+ }
+ }
+ stage('Create K8s Cluster') {
+ steps {
+ script {
+ def clusterExists = sh returnStdout: true, script: """
+ kind get clusters | grep ${clusterName} | wc -l
+ """
+ if (clusterExists.trim() == "0") {
+ createKubernetesCluster([nodes: 3, name: clusterName])
+ }
+ }
+ }
+ }
+ stage('Load image in kind nodes') {
+ steps {
+ loadToKind()
+ }
+ }
+ stage('Install Voltha') {
+ steps {
+ timeout(20) {
+ script {
+ imageFlags = getVolthaImageFlags(gerritProject)
+ // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+ def localCharts = false
+ if (volthaHelmChartsChange != "" || gerritProject == "voltha-helm-charts" || branch != "master") {
+ localCharts = true
+ }
+ def flags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml ${imageFlags} "
+ // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+ flags = flags + "--set onos-classic.onosSshPort=30115 " +
+ "--set onos-classic.onosApiPort=30120 " +
+ "--set onos-classic.onosOfPort=31653 " +
+ "--set onos-classic.individualOpenFlowNodePorts=true " + extraHelmFlags
+ volthaDeploy([
+ workflow: workFlow.toLowerCase(),
+ extraHelmFlags: flags,
+ localCharts: localCharts,
+ kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+ onosReplica: 3,
+ atomixReplica: 3,
+ kafkaReplica: 3,
+ etcdReplica: 3,
+ ])
+ }
+ // start logging
+ sh """
+ rm -rf $WORKSPACE/${workFlow}/
+ mkdir -p $WORKSPACE/${workFlow}
+ _TAG=kail-${workFlow} kail -n infra -n voltha > $WORKSPACE/${workFlow}/onos-voltha-combined.log &
+ """
+ sh returnStdout: false, script: '''
+ # start logging with kail
+
+ mkdir -p $LOG_FOLDER
+
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Starting logs for: ${app}"
+ _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+ done
+ '''
+ sh """
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+ ps aux | grep port-forward
+ """
+ getPodsInfo("$WORKSPACE")
+ }
+ }
+ }
+ stage('Deploy Kafka Dump Chart') {
+ steps {
+ script {
+ sh returnStdout: false, script: """
+ helm repo add cord https://charts.opencord.org
+ helm repo update
+ if helm version -c --short|grep v2 -q; then
+ helm install -n voltha-kafka-dump cord/voltha-kafka-dump
+ else
+ helm install voltha-kafka-dump cord/voltha-kafka-dump
+ fi
+ """
+ }
+ }
+ }
+ stage('Push Tech-Profile') {
+ when {
+ expression { params.profile != "Default" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
+ kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
+ """
+ }
+ }
+
+ stage('Push Sadis-config') {
+ steps {
+ sh returnStdout: false, script: """
+ ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115
+ ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
+
+ if [[ "${workFlow.toUpperCase()}" == "DT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+ elif [[ "${workFlow.toUpperCase()}" == "TT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+ else
+ # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
+ fi
+ """
+ }
+ }
+ stage('Reinstall OLT software') {
+ when {
+ expression { params.reinstallOlt }
+ }
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 0
+ }
+ if ( params.branch == 'voltha-2.3' ) {
+ oltDebVersion = oltDebVersionVoltha23
+ } else {
+ oltDebVersion = oltDebVersionMaster
+ }
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 1
+ }
+ if ( olt.fortygig ) {
+ // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
+ }
+ }
+ }
+ }
+ }
+
+ stage('Restart OLT processes') {
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
+ sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot'
+ sleep 120
+ """
+ waitUntil {
+ onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
+ return onu_discovered.toInteger() > 0
+ }
+ }
+ }
+ }
+ }
+ stage('Run E2E Tests') {
+ steps {
+ script {
+ // different workflows need different make targets and different robot files
+ if ( params.workflow.toUpperCase() == "DT" ) {
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+ robotFile = "Voltha_DT_PODTests.robot"
+ makeTarget = "voltha-dt-test"
+ robotFunctionalKeyword = "-i functionalDt"
+ robotDataplaneKeyword = "-i dataplaneDt"
+ }
+ else if ( params.workflow.toUpperCase() == "TT" ) {
+ // TODO the TT tests have diffent tags, address once/if TT is support on the Tucson POD
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ robotFile = "Voltha_TT_PODTests.robot"
+ makeTarget = "voltha-tt-test"
+ robotFunctionalKeyword = "-i functionalTt"
+ robotDataplaneKeyword = "-i dataplaneTt"
+ }
+ else {
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ robotFile = "Voltha_PODTests.robot"
+ makeTarget = "voltha-test"
+ robotFunctionalKeyword = "-i functional"
+ robotDataplaneKeyword = "-i dataplane"
+ }
+ }
+ sh returnStdout: false, script: """
+ mkdir -p $WORKSPACE/RobotLogs
+
+ export ROBOT_CONFIG_FILE="$WORKSPACE/${robotConfigFile}"
+ export ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
+ export ROBOT_FILE="${robotFile}"
+
+ # If the Gerrit comment contains a line with "functional tests" then run the full
+ # functional test suite. This covers tests tagged either 'sanity' or 'functional'.
+ # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+ REGEX="functional tests"
+ if [[ "${gerritComment}" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="${robotFunctionalKeyword} "
+ fi
+ # Likewise for dataplane tests
+ REGEX="dataplane tests"
+ if [[ "${gerritComment}" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="${robotDataplaneKeyword}"
+ fi
+
+ make -C $WORKSPACE/voltha-system-tests ${makeTarget} || true
+ """
+ }
+ }
+ }
+ post {
+ always {
+ // stop logging
+ sh """
+ P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${workFlow}" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_IDS" ]; then
+ echo \$P_IDS
+ for P_ID in \$P_IDS; do
+ kill -9 \$P_ID
+ done
+ fi
+ gzip $WORKSPACE/${workFlow}/onos-voltha-combined.log || true
+ """
+ sh '''
+ # stop the kail processes
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Stopping logs for: ${app}"
+ _TAG="kail-$app"
+ P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+ if [ -n "$P_IDS" ]; then
+ echo $P_IDS
+ for P_ID in $P_IDS; do
+ kill -9 $P_ID
+ done
+ fi
+ done
+ '''
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/log*.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/output*.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/report*.html',
+ unstableThreshold: 0,
+ onlyCritical: true]);
+ archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz,**/*.log'
+ }
+ }
+}
+
+// refs/changes/06/24206/5
diff --git a/jjb/pipeline/voltha/voltha-2.8/voltha-scale-multi-stack.groovy b/jjb/pipeline/voltha/voltha-2.8/voltha-scale-multi-stack.groovy
new file mode 100644
index 0000000..6d75846
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.8/voltha-scale-multi-stack.groovy
@@ -0,0 +1,476 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA using kind-voltha and performs a scale test
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def ofAgentConnections(numOfOnos, releaseName, namespace) {
+ def params = " "
+ numOfOnos.times {
+ params += "--set voltha.services.controller[${it}].address=${releaseName}-onos-classic-${it}.${releaseName}-onos-classic-hs.${namespace}.svc:6653 "
+ }
+ return params
+}
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 120, unit: 'MINUTES')
+ }
+ environment {
+ JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+ KUBECONFIG="$HOME/.kube/config"
+ SSHPASS="karaf"
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+
+ APPS_TO_LOG="etcd kafka onos-onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server"
+ LOG_FOLDER="$WORKSPACE/logs"
+ }
+
+ stages {
+ stage ('Cleanup') {
+ steps {
+ timeout(time: 11, unit: 'MINUTES') {
+ sh """
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 || true
+ """
+ script {
+ def namespaces = ["infra"]
+ // FIXME we may have leftovers from more VOLTHA stacks (eg: run1 had 10 stacks, run2 had 2 stacks)
+ volthaStacks.toInteger().times {
+ namespaces += "voltha${it + 1}"
+ }
+ helmTeardown(namespaces)
+ }
+ sh returnStdout: false, script: """
+ helm repo add onf https://charts.opencord.org
+ helm repo add cord https://charts.opencord.org
+ helm repo update
+
+ # remove all port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 || true
+ """
+ }
+ }
+ }
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${release}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage('Deploy common infrastructure') {
+ // includes monitoring
+ steps {
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ helm install -n infra nem-monitoring cord/nem-monitoring \
+ -f $HOME/voltha-scale/grafana.yaml \
+ --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+ --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+ fi
+ '''
+ }
+ }
+ stage('Deploy VOLTHA infrastructure') {
+ steps {
+ sh returnStdout: false, script: '''
+
+ kubectl create configmap -n infra kube-config "--from-file=kube_config=\$KUBECONFIG" || true
+
+ export EXTRA_HELM_FLAGS+=' '
+
+ # No persistent-volume-claims in Atomix
+ EXTRA_HELM_FLAGS+="--set onos-classic.atomix.persistence.enabled=false "
+ # disable the securityContext, this is a development cluster
+ EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
+
+ echo \$EXTRA_HELM_FLAGS
+
+ helm upgrade --install -n infra voltha-infra onf/voltha-infra \
+ -f $WORKSPACE/voltha-helm-charts/examples/${workflow}-values.yaml \
+ --set onos-classic.replicas=${onosReplicas},onos-classic.atomix.replicas=${atomixReplicas} \
+ --set radius.enabled=${withEapol} \
+ --set global.log_level=${logLevel} \
+ --set onos-classic.onosSshPort=30115 \
+ --set onos-classic.onosApiPort=30120 \
+ --set kafka.replicaCount=3,kafka.zookeeper.replicaCount=3 \
+ --set etcd.statefulset.replicaCount=3 \$EXTRA_HELM_FLAGS
+ '''
+ }
+ }
+ stage('Deploy Voltha') {
+ steps {
+ deploy_voltha_stacks(params.volthaStacks)
+ }
+ }
+ stage('Start logging') {
+ //FIXME this collects the logs all in one file for all the 10 stacks
+ steps {
+ sh returnStdout: false, script: '''
+ # start logging with kail
+
+ mkdir -p $LOG_FOLDER
+
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Starting logs for: ${app}"
+ _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+ done
+ '''
+ }
+ }
+ stage('Configuration') {
+ steps {
+ script {
+ sh returnStdout: false, script: """
+
+ # forward ETCD port
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG=etcd-port-forward /bin/bash -c "while true; do kubectl -n infra port-forward --address 0.0.0.0 service/etcd 9999:2379; done 2>&1 " &
+
+ # forward ONOS ports
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG=onos-port-forward /bin/bash -c "while true; do kubectl -n infra port-forward --address 0.0.0.0 service/voltha-infra-onos-classic-hs 8101:8101; done 2>&1 " &
+ JENKINS_NODE_COOKIE="dontKillMe" _TAG=onos-port-forward /bin/bash -c "while true; do kubectl -n infra port-forward --address 0.0.0.0 service/voltha-infra-onos-classic-hs 8181:8181; done 2>&1 " &
+
+ # make sure the the port-forward has started before moving forward
+ sleep 5
+ """
+ sh returnStdout: false, script: """
+ # TODO this needs to be repeated per stack
+ # kubectl exec \$(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print \$1}') -- bbsimctl log ${logLevel.toLowerCase()} false
+
+ #Setting link discovery
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 900
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.opencord.olt.impl.Olt provisionDelay 1000
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg log:set ${logLevel} org.onosproject
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg log:set ${logLevel} org.opencord
+
+ # Set Flows/Ports/Meters poll frequency
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+
+ #SR is not needed in scale tests and not currently used by operators in production, can be disabled.
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.onosproject.segmentrouting
+
+
+ if [ ${withFlows} = false ]; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt
+ fi
+ """
+ }
+ }
+ }
+ stage('Setup Test') {
+ steps {
+ sh '''
+ mkdir -p $WORKSPACE/RobotLogs
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ }
+ }
+ stage('Run Test') {
+ steps {
+ test_voltha_stacks(params.volthaStacks)
+ }
+ }
+ }
+ post {
+ always {
+ // collect result, done in the "post" step so it's executed even in the
+ // event of a timeout in the tests
+ sh '''
+
+ # stop the kail processes
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Stopping logs for: ${app}"
+ _TAG="kail-$app"
+ P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+ if [ -n "$P_IDS" ]; then
+ echo $P_IDS
+ for P_ID in $P_IDS; do
+ kill -9 $P_ID
+ done
+ fi
+ done
+ '''
+ // compressing the logs to save space on Jenkins
+ sh '''
+ cd $LOG_FOLDER
+ tar -czf logs.tar.gz *.log
+ rm *.log
+ '''
+ plot([
+ csvFileName: 'scale-test.csv',
+ csvSeries: [
+ [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ ],
+ group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (Stacks: ${params.volthaStacks}, OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
+ ])
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/**/log.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/**/output.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/**/report.html',
+ onlyCritical: true,
+ unstableThreshold: 0]);
+ // get all the logs from kubernetes PODs
+ sh returnStdout: false, script: '''
+
+ # store information on running charts
+ helm ls --all-namespaces > $LOG_FOLDER/helm-list.txt || true
+
+ # store information on the running pods
+ kubectl get pods --all-namespaces -o wide > $LOG_FOLDER/pods.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
+
+ # copy the ONOS logs directly from the container to avoid the color codes
+ printf '%s\n' $(kubectl get pods -n infra -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+ '''
+ // dump all the BBSim(s) ONU information
+ script {
+ for (int i = 1; i <= params.volthaStacks.toInteger(); i++) {
+ stack_ns="voltha"+i
+ sh """
+ mkdir -p \$LOG_FOLDER/${stack_ns}
+ BBSIM_IDS=\$(kubectl -n ${stack_ns} get pods | grep bbsim | grep -v server | awk '{print \$1}')
+ IDS=(\$BBSIM_IDS)
+
+ for bbsim in "\${IDS[@]}"
+ do
+ kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl onu list > \$LOG_FOLDER/${stack_ns}/\$bbsim-device-list.txt || true
+ kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl service list > \$LOG_FOLDER/${stack_ns}/\$bbsim-service-list.txt || true
+ kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl olt resources GEM_PORT > \$LOG_FOLDER/${stack_ns}/\$bbsim-flows-gem-ports.txt || true
+ kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl olt resources ALLOC_ID > \$LOG_FOLDER/${stack_ns}/\$bbsim-flows-alloc-ids.txt || true
+ kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl olt pons > \$LOG_FOLDER/${stack_ns}/\$bbsim-pon-resources.txt || true
+ done
+ """
+ }
+ }
+ // get ONOS debug infos
+ sh '''
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt || true
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt || true
+
+ if [ ${withFlows} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt || true
+ fi
+
+ if [ ${provisionSubscribers} = true ]; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt || true
+ fi
+
+ if [ ${withEapol} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt || true
+ fi
+
+ if [ ${withDhcp} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt || true
+ fi
+ '''
+ // collect etcd metrics
+ sh '''
+ mkdir -p $WORKSPACE/etcd-metrics
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+ '''
+ // get VOLTHA debug infos
+ script {
+ for (int i = 1; i <= params.volthaStacks.toInteger(); i++) {
+ stack_ns="voltha"+i
+ voltcfg="~/.volt/config-voltha"+i
+ try {
+ sh """
+
+ # _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555& > /dev/null 2>&1
+ _TAG="voltha-port-forward" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555 > /dev/null 2>&1; done"&
+
+ voltctl -m 8MB device list -o json > $LOG_FOLDER/${stack_ns}/device-list.json || true
+ python -m json.tool $LOG_FOLDER/${stack_ns}/device-list.json > $LOG_FOLDER/${stack_ns}/voltha-devices-list.json || true
+ rm $LOG_FOLDER/${stack_ns}/device-list.json || true
+ voltctl -m 8MB device list > $LOG_FOLDER/${stack_ns}/voltha-devices-list.txt || true
+
+ DEVICE_LIST=
+ printf '%s\n' \$(voltctl -m 8MB device list | grep olt | awk '{print \$1}') | xargs --no-run-if-empty -I# bash -c "voltctl-m 8MB device flows # > $LOG_FOLDER/${stack_ns}/voltha-device-flows-#.txt" || true
+ printf '%s\n' \$(voltctl -m 8MB device list | grep olt | awk '{print \$1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/${stack_ns}/voltha-device-ports-#.txt" || true
+
+ printf '%s\n' \$(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/${stack_ns}/voltha-logicaldevice-flows-#.txt" || true
+ printf '%s\n' \$(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/${stack_ns}/voltha-logicaldevice-ports-#.txt" || true
+
+ # remove VOLTHA port-forward
+ ps aux | grep port-forw | grep voltha-api | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 || true
+ """
+ } catch(e) {
+ println e
+ sh '''
+ echo "Can't get device list from voltctl"
+ '''
+ }
+ }
+ }
+ // get cpu usage by container
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ sleep 60 # we have to wait for prometheus to collect all the information
+ python tests/scale/sizing.py -o $WORKSPACE/plots || true
+ fi
+ '''
+ archiveArtifacts artifacts: 'kind-voltha/install-*.log,execution-time-*.txt,logs/**/*.txt,logs/**/*.tar.gz,RobotLogs/**/*,plots/*,etcd-metrics/*'
+ }
+ }
+}
+
+def deploy_voltha_stacks(numberOfStacks) {
+ for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+ stage("Deploy VOLTHA stack " + i) {
+ // ${logLevel}
+ def extraHelmFlags = "${extraHelmFlags} --set global.log_level=${logLevel},enablePerf=true,onu=${onus},pon=${pons} "
+ extraHelmFlags += " --set securityContext.enabled=false,atomix.persistence.enabled=false "
+
+ // FIXME having to set all of these values is annoying, is there a better solution?
+ def volthaHelmFlags = extraHelmFlags +
+ ofAgentConnections(onosReplicas.toInteger(), "voltha-infra", "infra")
+
+ def localCharts = false
+ if (volthaHelmChartsChange != "") {
+ localCharts = true
+ }
+
+ volthaStackDeploy([
+ bbsimReplica: olts.toInteger(),
+ infraNamespace: "infra",
+ volthaNamespace: "voltha${i}",
+ stackName: "voltha${i}",
+ stackId: i,
+ workflow: workflow,
+ extraHelmFlags: volthaHelmFlags,
+ localCharts: localCharts
+ ])
+ }
+ }
+}
+
+def test_voltha_stacks(numberOfStacks) {
+ for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+ stage("Test VOLTHA stack " + i) {
+ timeout(time: 15, unit: 'MINUTES') {
+ sh """
+
+ # we are restarting the voltha-api port-forward for each stack, no need to have a different voltconfig file
+ voltctl -s 127.0.0.1:55555 config > $HOME/.volt/config
+ export VOLTCONFIG=$HOME/.volt/config
+
+ # _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555& > /dev/null 2>&1
+ _TAG="voltha-port-forward" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555 > /dev/null 2>&1; done"&
+
+
+ ROBOT_PARAMS="-v stackId:${i} \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ --noncritical non-critical \
+ -e igmp \
+ -e teardown "
+
+ if [ ${withEapol} = false ] ; then
+ ROBOT_PARAMS+="-e authentication "
+ fi
+
+ if [ ${withDhcp} = false ] ; then
+ ROBOT_PARAMS+="-e dhcp "
+ fi
+
+ if [ ${provisionSubscribers} = false ] ; then
+ # if we're not considering subscribers then we don't care about authentication and dhcp
+ ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+ fi
+
+ if [ ${withFlows} = false ] ; then
+ ROBOT_PARAMS+="-i setup -i activation "
+ fi
+
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $WORKSPACE/RobotLogs/voltha${i} \
+ \$ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+
+ # collect results
+ python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/voltha${i}/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time-voltha${i}.txt || true
+ cat $WORKSPACE/execution-time-voltha${i}.txt
+ """
+ sh """
+ # remove VOLTHA port-forward
+ ps aux | grep port-forw | grep voltha-api | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 2>&1 > /dev/null || true
+ """
+ }
+ }
+ }
+}
diff --git a/jjb/pipeline/voltha/voltha-2.8/voltha-scale-test.groovy b/jjb/pipeline/voltha/voltha-2.8/voltha-scale-test.groovy
new file mode 100644
index 0000000..85e32e4
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.8/voltha-scale-test.groovy
@@ -0,0 +1,768 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA and performs a scale test
+
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+// this function generates the correct parameters for ofAgent
+// to connect to multiple ONOS instances
+def ofAgentConnections(numOfOnos, releaseName, namespace) {
+ def params = " "
+ numOfOnos.times {
+ params += "--set voltha.services.controller[${it}].address=${releaseName}-onos-classic-${it}.${releaseName}-onos-classic-hs.${namespace}.svc:6653 "
+ }
+ return params
+}
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 60, unit: 'MINUTES')
+ }
+ environment {
+ JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+ KUBECONFIG="$HOME/.kube/config"
+ VOLTCONFIG="$HOME/.volt/config"
+ SSHPASS="karaf"
+ VOLTHA_LOG_LEVEL="${logLevel}"
+ NUM_OF_BBSIM="${olts}"
+ NUM_OF_OPENONU="${openonuAdapterReplicas}"
+ NUM_OF_ONOS="${onosReplicas}"
+ NUM_OF_ATOMIX="${atomixReplicas}"
+ EXTRA_HELM_FLAGS=" "
+
+ APPS_TO_LOG="etcd kafka onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server onos-config-loader"
+ LOG_FOLDER="$WORKSPACE/logs"
+
+ GERRIT_PROJECT="${GERRIT_PROJECT}"
+ }
+
+ stages {
+ stage ('Cleanup') {
+ steps {
+ timeout(time: 11, unit: 'MINUTES') {
+ script {
+ helmTeardown(["default"])
+ }
+ sh returnStdout: false, script: '''
+ helm repo add onf https://charts.opencord.org
+ helm repo update
+
+ # remove all persistent volume claims
+ kubectl delete pvc --all-namespaces --all
+ PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+ while [[ \$PVCS != 0 ]]; do
+ sleep 5
+ PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+ done
+
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+
+ cd $WORKSPACE
+ rm -rf $WORKSPACE/*
+ '''
+ }
+ }
+ }
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${release}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage('Build patch') {
+ when {
+ expression {
+ return params.GERRIT_PROJECT
+ }
+ }
+ steps {
+ sh """
+ git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
+ cd \$GERRIT_PROJECT
+ git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
+
+ DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
+ DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
+ """
+ }
+ }
+ stage('Deploy common infrastructure') {
+ steps {
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ helm install nem-monitoring onf/nem-monitoring \
+ -f $HOME/voltha-scale/grafana.yaml \
+ --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+ --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+ fi
+ '''
+ }
+ }
+ stage('Deploy Voltha') {
+ steps {
+ timeout(time: 10, unit: 'MINUTES') {
+ script {
+ sh returnStdout: false, script: '''
+ # start logging with kail
+
+ mkdir -p $LOG_FOLDER
+
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Starting logs for: ${app}"
+ _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+ done
+ '''
+ def returned_flags = sh (returnStdout: true, script: """
+
+ export EXTRA_HELM_FLAGS+=' '
+
+ # BBSim custom image handling
+ if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
+ IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
+ fi
+
+ # VOLTHA custom image handling
+ if [ '${rwCoreImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
+ IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=\$rwCoreRepo,voltha.images.rw_core.tag=\$rwCoreTag "
+ fi
+
+ # ofAgent custom image handling
+ if [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'of-agent' ]; then
+ IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=\$ofAgentRepo,voltha.images.ofagent.tag=\$ofAgentTag "
+ fi
+
+ # OpenOLT custom image handling
+ if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
+ IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha-adapter-openolt.images.adapter_open_olt.repository=\$openoltAdapterRepo,voltha-adapter-openolt.images.adapter_open_olt.tag=\$openoltAdapterTag "
+ fi
+
+ # OpenONU custom image handling
+ if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
+ IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu.repository=\$openonuAdapterRepo,voltha-adapter-openonu.images.adapter_open_onu.tag=\$openonuAdapterTag "
+ fi
+
+ # OpenONU GO custom image handling
+ if [ '${openonuAdapterGoImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter-go' ]; then
+ IFS=: read -r openonuAdapterGoRepo openonuAdapterGoTag <<< '${openonuAdapterGoImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,voltha-adapter-openonu.images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
+ fi
+
+ # ONOS custom image handling
+ if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
+ IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=\$onosRepo,onos-classic.image.tag=\$onosTag "
+ fi
+
+ # set BBSim parameters
+ EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus} '
+
+ # disable the securityContext, this is a development cluster
+ EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
+
+ # No persistent-volume-claims in Atomix
+ EXTRA_HELM_FLAGS+="--set onos-classic.atomix.persistence.enabled=false "
+
+ # Use custom built images
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,voltha.images.rw_core.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha-openolt-adapter.images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,voltha-openolt-adapter.images.adapter_open_olt.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter.images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,voltha-openonu-adapter.images.adapter_open_onu.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter-go' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter-go.images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,voltha-openonu-adapter-go.images.adapter_open_onu_go.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,ofagent-go.images.ofagent.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
+ EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=${dockerRegistry}/voltha/voltha-onos,onos-classic.image.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
+ EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
+ fi
+ echo \$EXTRA_HELM_FLAGS
+
+ """).trim()
+
+ def extraHelmFlags = returned_flags
+ // The added space before params.extraHelmFlags is required due to the .trim() above
+ def infraHelmFlags =
+ " --set global.log_level=${logLevel} " +
+ "--set onos-classic.onosSshPort=30115 " +
+ "--set onos-classic.onosApiPort=30120 " +
+ extraHelmFlags + " " + params.extraHelmFlags
+
+ println "Passing the following parameters to the VOLTHA infra deploy: ${infraHelmFlags}."
+
+ def localCharts = false
+ if (volthaHelmChartsChange != "" || branch != "master") {
+ localCharts = true
+ }
+
+ volthaInfraDeploy([
+ workflow: workflow,
+ infraNamespace: "default",
+ extraHelmFlags: infraHelmFlags,
+ localCharts: localCharts,
+ onosReplica: onosReplicas,
+ atomixReplica: atomixReplicas,
+ kafkaReplica: kafkaReplicas,
+ etcdReplica: etcdReplicas,
+ ])
+
+ stackHelmFlags = " --set onu=${onus},pon=${pons} --set global.log_level=${logLevel.toLowerCase()} "
+ stackHelmFlags += " --set voltha.ingress.enabled=true --set voltha.ingress.enableVirtualHosts=true --set voltha.fullHostnameOverride=voltha.scale1.dev "
+ stackHelmFlags += extraHelmFlags + " " + params.extraHelmFlags
+
+ volthaStackDeploy([
+ bbsimReplica: olts.toInteger(),
+ infraNamespace: "default",
+ volthaNamespace: "default",
+ stackName: "voltha1", // TODO support custom charts
+ workflow: workflow,
+ extraHelmFlags: stackHelmFlags,
+ localCharts: localCharts,
+ ])
+ sh """
+ set +x
+
+ echo -ne "\nWaiting for VOLTHA and ONOS to start..."
+ voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
+ onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
+ while [[ \$voltha != 0 || \$onos != 0 ]]; do
+ sleep 5
+ echo -ne "."
+ voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
+ onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
+ done
+ echo -ne "\nVOLTHA and ONOS pods ready\n"
+ kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l
+ kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l
+ """
+ start_port_forward(olts)
+ }
+ }
+ }
+ }
+ stage('Configuration') {
+ steps {
+ script {
+ def tech_prof_directory = "XGS-PON"
+ sh returnStdout: false, script: """
+ #Setting link discovery
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 900
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.opencord.olt.impl.Olt provisionDelay 1000
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set ${logLevel} org.onosproject
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set ${logLevel} org.opencord
+
+ # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.opencord.cordmcast
+ # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.mcast
+ # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.opencord.igmpproxy
+ # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.opencord.olt
+ # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager
+
+ kubectl exec \$(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print \$1}') -- bbsimctl log ${logLevel.toLowerCase()} false
+
+ # Set Flows/Ports/Meters/Groups poll frequency
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.group.impl.OpenFlowGroupProvider groupPollInterval ${onosGroupInterval}
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.FlowObjectiveManager numThreads ${flowObjWorkerThreads}
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager objectiveTimeoutMs 300000
+
+ #SR is not needed in scale tests and not currently used by operators in production, can be disabled.
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 app deactivate org.onosproject.segmentrouting
+
+ if [ ${withFlows} = false ]; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 app deactivate org.opencord.olt
+ fi
+
+ if [ '${workflow}' = 'tt' ]; then
+ etcd_container=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$2}')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
+ put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
+ put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast.json
+ put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66')
+ fi
+
+ if [ ${withPcap} = true ] ; then
+ # Start the tcp-dump in ofagent
+ export OF_AGENT=\$(kubectl get pods -l app=ofagent -o name)
+ kubectl exec \$OF_AGENT -- apk update
+ kubectl exec \$OF_AGENT -- apk add tcpdump
+ kubectl exec \$OF_AGENT -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+ _TAG=ofagent-tcpdump kubectl exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
+
+ # Start the tcp-dump in radius
+ export RADIUS=\$(kubectl get pods -l app=radius -o name)
+ kubectl exec \$RADIUS -- apt-get update
+ kubectl exec \$RADIUS -- apt-get install -y tcpdump
+ _TAG=radius-tcpdump kubectl exec \$RADIUS -- tcpdump -w out.pcap&
+
+ # Start the tcp-dump in ONOS
+ for i in \$(seq 0 \$ONOSES); do
+ INSTANCE="onos-onos-classic-\$i"
+ kubectl exec \$INSTANCE -- apt-get update
+ kubectl exec \$INSTANCE -- apt-get install -y tcpdump
+ kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+ _TAG=\$INSTANCE kubectl exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
+ done
+ fi
+ """
+ }
+ }
+ }
+ stage('Load MIB Template') {
+ when {
+ expression {
+ return params.withMibTemplate
+ }
+ }
+ steps {
+ sh """
+ # load MIB template
+ wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter-go/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
+ cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods |grep etcd-0 | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/go_templates/BBSM/12345123451234512345/00000000000001
+ """
+ }
+ }
+ stage('Run Test') {
+ steps {
+ sh '''
+ mkdir -p $WORKSPACE/RobotLogs
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ sh '''
+ if [ ${withProfiling} = true ] ; then
+ mkdir -p $LOG_FOLDER/pprof
+ echo $PATH
+ #Creating Python script for ONU Detection
+ cat << EOF > $WORKSPACE/pprof.sh
+timestamp() {
+ date +"%T"
+}
+
+i=0
+while [[ true ]]; do
+ ((i++))
+ ts=$(timestamp)
+ go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
+
+ go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
+
+ go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
+
+ sleep 10
+done
+EOF
+
+ _TAG="pprof"
+ _TAG=$_TAG bash $WORKSPACE/pprof.sh &
+ fi
+ '''
+ timeout(time: 15, unit: 'MINUTES') {
+ sh '''
+ ROBOT_PARAMS="--exitonfailure \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v ONOS_SSH_PORT:30115 \
+ -v ONOS_REST_PORT:30120 \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ --noncritical non-critical \
+ -e igmp -e teardown "
+
+ if [ ${withEapol} = false ] ; then
+ ROBOT_PARAMS+="-e authentication "
+ fi
+
+ if [ ${withDhcp} = false ] ; then
+ ROBOT_PARAMS+="-e dhcp "
+ fi
+
+ if [ ${provisionSubscribers} = false ] ; then
+ # if we're not considering subscribers then we don't care about authentication and dhcp
+ ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+ fi
+
+ if [ ${withFlows} = false ] ; then
+ ROBOT_PARAMS+="-i setup -i activation "
+ fi
+
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $WORKSPACE/RobotLogs \
+ $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+ '''
+ }
+ }
+ }
+ stage('Run Igmp Tests') {
+ environment {
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/IgmpTests"
+ }
+ when {
+ expression {
+ return params.withIgmp
+ }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.store.group.impl
+ """
+ sh '''
+ set +e
+ mkdir -p $ROBOT_LOGS_DIR
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ timeout(time: 11, unit: 'MINUTES') {
+ sh '''
+ ROBOT_PARAMS="--exitonfailure \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ -v ONOS_SSH_PORT:30115 \
+ -v ONOS_REST_PORT:30120 \
+ --noncritical non-critical \
+ -i igmp \
+ -e setup -e activation -e flow-before \
+ -e authentication -e provision -e flow-after \
+ -e dhcp -e teardown "
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $ROBOT_LOGS_DIR \
+ $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+ '''
+ }
+ }
+ }
+ }
+ post {
+ always {
+ // collect result, done in the "post" step so it's executed even in the
+ // event of a timeout in the tests
+ sh '''
+
+ # stop the kail processes
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Stopping logs for: ${app}"
+ _TAG="kail-$app"
+ P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+ if [ -n "$P_IDS" ]; then
+ echo $P_IDS
+ for P_ID in $P_IDS; do
+ kill -9 $P_ID
+ done
+ fi
+ done
+
+ if [ ${withPcap} = true ] ; then
+ # stop ofAgent tcpdump
+ P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+
+ # stop radius tcpdump
+ P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+
+ # stop onos tcpdump
+ LIMIT=$(($NUM_OF_ONOS - 1))
+ for i in $(seq 0 $LIMIT); do
+ INSTANCE="onos-onos-classic-$i"
+ P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+ done
+
+ # copy the file
+ export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
+ kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
+
+ export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
+ kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
+
+ LIMIT=$(($NUM_OF_ONOS - 1))
+ for i in $(seq 0 $LIMIT); do
+ INSTANCE="onos-onos-classic-$i"
+ kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
+ done
+ fi
+
+ cd voltha-system-tests
+ source ./vst_venv/bin/activate || true
+ python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
+ cat $WORKSPACE/execution-time.txt
+ '''
+ sh '''
+ if [ ${withProfiling} = true ] ; then
+ _TAG="pprof"
+ P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+ if [ -n "$P_IDS" ]; then
+ echo $P_IDS
+ for P_ID in $P_IDS; do
+ kill -9 $P_ID
+ done
+ fi
+ fi
+ '''
+ plot([
+ csvFileName: 'scale-test.csv',
+ csvSeries: [
+ [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ ],
+ group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
+ ])
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: '**/log*.html',
+ otherFiles: '',
+ outputFileName: '**/output*.xml',
+ outputPath: 'RobotLogs',
+ passThreshold: 100,
+ reportFileName: '**/report*.html',
+ onlyCritical: true,
+ unstableThreshold: 0]);
+ // get all the logs from kubernetes PODs
+ sh returnStdout: false, script: '''
+
+ # store information on running charts
+ helm ls > $LOG_FOLDER/helm-list.txt || true
+
+ # store information on the running pods
+ kubectl get pods -o wide > $LOG_FOLDER/pods.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
+
+ # copy the ONOS logs directly from the container to avoid the color codes
+ printf '%s\n' $(kubectl get pods -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+ # get ONOS cfg from the 3 nodes
+ # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/apache-karaf-4.2.9/bin/client cfg get > ~/voltha-infra-onos-classic-0-cfg.txt || true
+ # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/apache-karaf-4.2.9/bin/client cfg get > ~/voltha-infra-onos-classic-1-cfg.txt || true
+ # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/apache-karaf-4.2.9/bin/client cfg get > ~/voltha-infra-onos-classic-2-cfg.txt || true
+
+ # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/apache-karaf-4.2.9/bin/client obj-next-ids > ~/voltha-infra-onos-classic-0-next-objs.txt || true
+ # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/apache-karaf-4.2.9/bin/client obj-next-ids > ~/voltha-infra-onos-classic-1-next-objs.txt || true
+ # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/apache-karaf-4.2.9/bin/client obj-next-ids > ~/voltha-infra-onos-classic-2-next-objs.txt || true
+
+ # get radius logs out of the container
+ kubectl cp $(kubectl get pods -l app=radius --no-headers | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER/radius.log || true
+ '''
+ // dump all the BBSim(s) ONU information
+ sh '''
+ BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
+ IDS=($BBSIM_IDS)
+
+ for bbsim in "${IDS[@]}"
+ do
+ kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
+ kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
+ kubectl exec -t $bbsim -- bbsimctl olt resources GEM_PORT > $LOG_FOLDER/$bbsim-flows-gem-ports.txt || true
+ kubectl exec -t $bbsim -- bbsimctl olt resources ALLOC_ID > $LOG_FOLDER/$bbsim-flows-alloc-ids.txt || true
+ kubectl exec -t $bbsim -- bbsimctl olt pons > $LOG_FOLDER/$bbsim-pon-resources.txt || true
+ done
+ '''
+ script {
+ // first make sure the port-forward is still running,
+ // sometimes Jenkins kills it relardless of the JENKINS_NODE_COOKIE=dontKillMe
+ def running = sh (
+ script: 'ps aux | grep port-forw | grep -E "onos|voltha" | grep -v grep | wc -l',
+ returnStdout: true
+ ).trim()
+ // if any of the voltha-api, onos-rest, onos-ssh port-forwards are not there
+ // kill all and restart
+ if (running != "3") {
+ start_port_forward(olts)
+ }
+ }
+ // get ONOS debug infos
+ sh '''
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg get > $LOG_FOLDER/onos-cfg.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 netcfg > $LOG_FOLDER/onos-netcfg.txt
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt
+
+ if [ ${withFlows} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt
+ fi
+
+ if [ ${provisionSubscribers} = true ]; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt
+ fi
+
+ if [ ${withEapol} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt
+ fi
+
+ if [ ${withDhcp} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt
+ fi
+
+ if [ ${withIgmp} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-routes > $LOG_FOLDER/onos-mcast-host-routes.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-show > $LOG_FOLDER/onos-mcast-host-show.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 groups > $LOG_FOLDER/onos-groups.txt
+ fi
+ '''
+ // collect etcd metrics
+ sh '''
+ mkdir -p $WORKSPACE/etcd-metrics
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-sum.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-bucket.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_wal_fsync_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-wal-fsync-time-bucket.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_network_peer_round_trip_time_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-network-peer-round-trip-time-seconds.json || true
+ etcd_namespace=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$1}')
+ etcd_container=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$2}')
+ kubectl exec -it -n \$etcd_namespace \$etcd_container -- etcdctl defrag --cluster || true
+ kubectl exec -it -n \$etcd_namespace \$etcd_container -- etcdctl endpoint status -w table > $WORKSPACE/etcd-metrics/etcd-status-table.txt || true
+
+ '''
+ // get VOLTHA debug infos
+ script {
+ try {
+ sh '''
+ voltctl -m 8MB device list -o json > $LOG_FOLDER/device-list.json || true
+ python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
+ rm $LOG_FOLDER/device-list.json || true
+ voltctl -m 8MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
+
+ printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
+ printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
+
+ printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
+ printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
+ '''
+ } catch(e) {
+ sh '''
+ echo "Can't get device list from voltclt"
+ '''
+ }
+ }
+ // get cpu usage by container
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate || true
+ sleep 60 # we have to wait for prometheus to collect all the information
+ python tests/scale/sizing.py -o $WORKSPACE/plots || true
+ fi
+ '''
+ archiveArtifacts artifacts: 'execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
+ }
+ }
+}
+
+def start_port_forward(olts) {
+ sh """
+ bbsimRestPortFwd=50071
+ for i in {0..${olts.toInteger() - 1}}; do
+ daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/bbsim\${i} \${bbsimRestPortFwd}:50071
+ ((bbsimRestPortFwd++))
+ done
+ """
+}