Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/mgcconfigdata.go b/vendor/github.com/cboling/omci/generated/mgcconfigdata.go
new file mode 100644
index 0000000..60b47bb
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/mgcconfigdata.go
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const MgcConfigDataClassId ClassID = ClassID(155)
+
+var mgcconfigdataBME *ManagedEntityDefinition
+
+// MgcConfigData (class ID #155)
+// The MGC config data ME defines the MGC configuration associated with an MG subscriber. It is
+// conditionally required for ONUs that support ITU-T H.248 VoIP services. If a non-OMCI interface
+// is used to manage VoIP signalling, this ME is unnecessary.
+//
+// Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// An instance of this ME may be associated with one or more VoIP voice CTP MEs.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
+// (mandatory) (2 bytes)
+//
+// Primary Mgc
+// Primary MGC: This attribute points to a network address ME that contains the name (IP address or
+// resolved name) of the primary MGC that controls the signalling messages. The port is optional
+// and defaults to 2944 for text message formats and 2955 for binary message formats. (R, W,
+// setbycreate) (mandatory) (2 bytes)
+//
+// Secondary Mgc
+// Secondary MGC: This attribute points to a network address ME that contains the name (IP address
+// or resolved name) of the secondary or backup MGC that controls the signalling messages. The port
+// is optional and defaults to 2944 for text message formats and 2955 for binary message formats.
+// (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Tcp_Udp Pointer
+// TCP/UDP pointer: This attribute points to the TCP/UDP config data ME to be used for
+// communication with the MGC. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Version
+// Version: This integer attribute reports the version of the Megaco protocol in use. The ONU
+// should deny an attempt by the OLT to set or create a value that it does not support. The value 0
+// indicates that no particular version is specified. (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Message Format
+// The default value is recommended to be 0. (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Maximum Retry Time
+// Maximum retry time: This attribute specifies the maximum retry time for MGC transactions, in
+// seconds. The default value 0 specifies vendor-specific implementation. (R, W) (optional)
+// (2 bytes)
+//
+// Maximum Retry Attempts
+// Maximum retry attempts: This attribute specifies the maximum number of times a message is
+// retransmitted to the MGC. The recommended default value 0 specifies vendor-specific
+// implementation. (R, W, setbycreate) (optional) (2 bytes)
+//
+// Service Change Delay
+// Service change delay: This attribute specifies the service status delay time for changes in line
+// service status. This attribute is specified in seconds. The default value 0 specifies no delay.
+// (R, W) (optional) (2 bytes)
+//
+// Termination Id Base
+// Termination ID base: This attribute specifies the base string for the ITU-T H.248 physical
+// termination ID(s) for this ONU. This string is intended to uniquely identify an ONU. Vendor-
+// specific termination identifiers (port IDs) are optionally added to this string to uniquely
+// identify a termination on a specific ONU. (R, W) (optional) (25 bytes)
+//
+// Softswitch
+// Softswitch: This attribute identifies the gateway softswitch vendor. The format is four ASCII
+// coded alphabetic characters [A..Z] as defined in [ATIS0300220]. A value of four null bytes
+// indicates an unknown or unspecified vendor. (R, W, setbycreate) (mandatory) (4 bytes)
+//
+// Message Id Pointer
+// Message ID pointer: This attribute points to a large string whose value specifies the message
+// identifier string for ITU-T H.248 messages originated by the ONU. (R, W, setbycreate) (optional)
+// (2 bytes)
+//
+type MgcConfigData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ mgcconfigdataBME = &ManagedEntityDefinition{
+ Name: "MgcConfigData",
+ ClassID: 155,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFFE0,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: Uint16Field("PrimaryMgc", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 1),
+ 2: Uint16Field("SecondaryMgc", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+ 3: Uint16Field("TcpUdpPointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 3),
+ 4: ByteField("Version", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 4),
+ 5: ByteField("MessageFormat", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 5),
+ 6: Uint16Field("MaximumRetryTime", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 6),
+ 7: Uint16Field("MaximumRetryAttempts", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 7),
+ 8: Uint16Field("ServiceChangeDelay", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 8),
+ 9: MultiByteField("TerminationIdBase", 25, nil, mapset.NewSetWith(Read, Write), false, false, true, false, 9),
+ 10: Uint32Field("Softswitch", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 10),
+ 11: Uint16Field("MessageIdPointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 11),
+ },
+ }
+}
+
+// NewMgcConfigData (class ID 155 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewMgcConfigData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(mgcconfigdataBME, params...)
+}